[Q] Getting "Could not extract" when installing Xposed Framework - Galaxy S 4 Q&A, Help & Troubleshooting

Hey guys,
I have a Galaxy S4 (i9500). I installed Arrow ROM v14 on it.
I have root and everything works fine in terms of rooting.
I then tried to install the framework of Xposed by clicking the Install/Update and got this after confirming root access:
"SD card:/storage/emulated/0/Android/data/de.robv.android.xposed.installer/files
Copying Xposed-Disabler-Recovery.zip...
Could not extract Xposed-Disabler-Recovery.zip"
I tried the following:
Installed Omega ROM where this problem did not appear. However, can't stay in that ROM because in that ROM my wifi and BT wont work (http://forum.xda-developers.com/showthread.php?p=53699322)
Flashed the same ROM again with full wipe including that Dalvik cache thing and same thing always happens.
Formatted my external SD card.
Did a factory reset, then full wipe including Dalvik cache and same thing happens.
Downloaded the apk manually (of the Xposed Installer) and installed both v32 once and v33 after - nothing changed the fact that it said the above message as soon as I click Install.
Thanks in advance.

morhsn said:
Hey guys,
I have a Galaxy S4 (i9500). I installed Arrow ROM v14 on it.
I have root and everything works fine in terms of rooting.
I then tried to install the framework of Xposed by clicking the Install/Update and got this after confirming root access:
"SD card:/storage/emulated/0/Android/data/de.robv.android.xposed.installer/files
Copying Xposed-Disabler-Recovery.zip...
Could not extract Xposed-Disabler-Recovery.zip"
I tried the following:
Installed Omega ROM where this problem did not appear. However, can't stay in that ROM because in that ROM my wifi and BT wont work (http://forum.xda-developers.com/showthread.php?p=53699322)
Flashed the same ROM again with full wipe including that Dalvik cache thing and same thing always happens.
Formatted my external SD card.
Did a factory reset, then full wipe including Dalvik cache and same thing happens.
Downloaded the apk manually (of the Xposed Installer) and installed both v32 once and v33 after - nothing changed the fact that it said the above message as soon as I click Install.
Thanks in advance.
Click to expand...
Click to collapse
Ended up going with OzcanRom...
Mod can close this thread.

Same problem
morhsn said:
Ended up going with OzcanRom...
Mod can close this thread.
Click to expand...
Click to collapse
http://cdn3.xda-developers.com/images/editor/smilie.gif
me too facing the same problem. because of this even titanium backup force closes when starting. shud be some permission error in accessing internal sd card?? i duno.. i tried to instal Arrow but failed. Such a problem is not in ozcan rom!.. only problem with ozcan rom is battery drain

Related

[Q] L7 Cyanogenmod10 BOOTLOOP

okay so i have rooted my p700, installed CWM, and flashed cm10... after that i rebooted my phone (i needed to in order to get link2sd to recognize my external sd), after that the CM went into a bootloop!! which got me very angry (considering it came at a very bad time)... so i reflashed it a number of times even tried older builds...still all i get is a hot processor and a bootloop....i have gone through so many forums, scavenged the whole internet for methods on fixing it but still no luck...anybody have anyway of fixing this? and one more thing after i formated my sd (trying to make partitions for link2sd i lost my backup )
try download latest CM10 and reflash it . Make sure follow the steps correctly
How to Install::
Download the ROM
Put it on your phone root
Reboot In Recovery(MAKE A BACKUP BEFORE DOING ANYTHING!)
Wipe Data/Cache,Wipe Cache,Wipe Dalvik Cache(Which you can find in Advanced)
Select Install ZIP from SDCard
Select the ROM and let it install,then also Install GAPPS.
Need More
slingswish said:
try download latest CM10 and reflash it . Make sure follow the steps correctly
How to Install::
Download the ROM
Put it on your phone root
Reboot In Recovery(MAKE A BACKUP BEFORE DOING ANYTHING!)
Wipe Data/Cache,Wipe Cache,Wipe Dalvik Cache(Which you can find in Advanced)
Select Install ZIP from SDCard
Select the ROM and let it install,then also Install GAPPS.
Click to expand...
Click to collapse
I did that and i got a blck screen with both the menu and back button lighten up,rebooted 2 and now i got the CM animation screen, not sure but i think its in a bootloop again been there for 3mins
Wierd
I just noticed that if i pull my sd-card out during the booting process the bootloop ends! wierd huh, anyway around it?

Need help - freezes and restarts

I updated my phone to latest liquidsmooth rom two days ago and the phone freezes and restarts/reboots randomly like sometimes when im on phone/ playing a game/ using browser/ connected to charger. Yesterday I changed rom to latest carbon rom. Did install (3 wipes) as told in the thread but im still having the reboots.
Im using TWRP recovery and had used Utility 1.10 to go back to stock from Energy rom with safestrap recovery.
Can tell me whats the prob? Is it the kernel problem?
Have you tried upgrading or reflashing TWRP and then doing a clean install of Carbon? Its probably worth doing a fresh download of each first just to make sure you cover all your bases. These reboots were happening to me a few months ago and it drove me mad. following these steps fixed it for me.
jcxmej said:
I updated my phone to latest liquidsmooth rom two days ago and the phone freezes and restarts/reboots randomly like sometimes when im on phone/ playing a game/ using browser/ connected to charger. Yesterday I changed rom to latest carbon rom. Did install (3 wipes) as told in the thread but im still having the reboots.
Im using TWRP recovery and had used Utility 1.10 to go back to stock from Energy rom with safestrap recovery.
Can tell me whats the prob? Is it the kernel problem?
Click to expand...
Click to collapse
Honestly, if you're using SafeStrap, that might be your problem. Remove SS and flash the ROM in TWRP. If your bootloader is unlocked, you don't really want to use SS. Also, make a stock backup in TWRP, prior to flashing. This way, it will be easier for you to recover in the future, and you won't need to go through the painful process of fastboot.
RikRong said:
Honestly, if you're using SafeStrap, that might be your problem. Remove SS and flash the ROM in TWRP. If your bootloader is unlocked, you don't really want to use SS. Also, make a stock backup in TWRP, prior to flashing. This way, it will be easier for you to recover in the future, and you won't need to go through the painful process of fastboot.
Click to expand...
Click to collapse
Like I said on first post Im using TWRP now. Previously I was using safestrap. I removed it and installed TRWP. Anyways thanks.
PantherVT said:
Have you tried upgrading or reflashing TWRP and then doing a clean install of Carbon? Its probably worth doing a fresh download of each first just to make sure you cover all your bases. These reboots were happening to me a few months ago and it drove me mad. following these steps fixed it for me.
Click to expand...
Click to collapse
Thanks man. I will upgrade TWRP or reinstall it first. Thanks for that tip. Will post again if it doesnt work.
Still having those restarts. Really irritating. Froze and rebooted 4 5 times today morning while I was on call and trying to message. I reflashed reinstalled everything. I used both Utility 1.10 and 1.20. Im getting reboots even the stock ROM after using the Utility. I am confused which Utility I should be using. I had no issue of rebooting before flashing using Utility. Can someone give me exact procedure to reflash so that i know i am not missing out anything.
jcxmej said:
Still having those restarts. Really irritating. Froze and rebooted 4 5 times today morning while I was on call and trying to message. I reflashed reinstalled everything. I used both Utility 1.10 and 1.20. Im getting reboots even the stock ROM after using the Utility. I am confused which Utility I should be using. I had no issue of rebooting before flashing using Utility. Can someone give me exact procedure to reflash so that i know i am not missing out anything.
Click to expand...
Click to collapse
you might need to do a clean install.
- what version of TWRP are you using (anything other than 2.4 should be fine)?
- to perform the clean install, mount system, then try wiping everything (system, factory reset, & internal storage) - DO NOT WIPE external SD (I presume this is where you store the ROM files
- after wiping, reboot recovery, then install whichever 4.2.2 ROM you want follow by the GApps (use the 3/2013 version)
jco23 said:
you might need to do a clean install.
- what version of TWRP are you using (anything other than 2.4 should be fine)?
- to perform the clean install, mount system, then try wiping everything (system, factory reset, & internal storage) - DO NOT WIPE external SD (I presume this is where you store the ROM files
- after wiping, reboot recovery, then install whichever 4.2.2 ROM you want follow by the GApps (use the 3/2013 version)
Click to expand...
Click to collapse
Since TWRP wasnt working for me, I tried flashing with CWM recovery by hashcode. Still had reboots. I was using TWRP 2.3.2.3
When you say wipe everything, does it include 'modem' and 'pds'? Saw these two options also inside Mount/Format menu of CWM recovery.
Also there was an option 'Mount sdcard' (internal I suppose) but when i click it nothing happens it remains as Mount sdcard. Rest of it changes from Mount to Unmount. Is there some problem with that?
Do I have to just Mount system only? Also after rebooting recovery do I have to mount system again?
I try again as you said meanwhile.
jcxmej said:
Since TWRP wasnt working for me, I tried flashing with CWM recovery by hashcode. Still had reboots. I was using TWRP 2.3.2.3
When you say wipe everything, does it include 'modem' and 'pds'? Saw these two options also inside Mount/Format menu of CWM recovery.
Also there was an option 'Mount sdcard' (internal I suppose) but when i click it nothing happens it remains as Mount sdcard. Rest of it changes from Mount to Unmount. Is there some problem with that?
Do I have to just Mount system only? Also after rebooting recovery do I have to mount system again?
I try again as you said meanwhile.
Click to expand...
Click to collapse
nope, just system/factory reset/internal storage.
yes, make sure everything is mounted (checked) so that they read "unmount"
jco23 said:
nope, just system/factory reset/internal storage.
yes, make sure everything is mounted (checked) so that they read "unmount"
Click to expand...
Click to collapse
Did exactly like said. Got into CWM recovery. Mounted system. Formatted system, data, cache, sdcard. Did factory reset and wiped the caches. Then rebooted recovery. Then installed the ROM, 3/13 gapps, gsm fix. Reboot system. Still no use. I got 2 reboots in 5 mins in the ROM. I checked the md5 of the files and its ok. Dont know what else to try?
jcxmej said:
Did exactly like said. Got into CWM recovery. Mounted system. Formatted system, data, cache, sdcard. Did factory reset and wiped the caches. Then rebooted recovery. Then installed the ROM, 3/13 gapps, gsm fix. Reboot system. Still no use. I got 2 reboots in 5 mins in the ROM. I checked the md5 of the files and its ok. Dont know what else to try?
Click to expand...
Click to collapse
which ROM are you trying to install?
jco23 said:
which ROM are you trying to install?
Click to expand...
Click to collapse
LiquidSmooth v2.9 by DHacker29
http://forum.xda-developers.com/showthread.php?t=2373703
I have also tried Carbon ROM but was having reboots with that too. I liked liquidsmooth better so trying to make this work.
jcxmej said:
LiquidSmooth v2.9 by DHacker29
http://forum.xda-developers.com/showthread.php?t=2373703
I have also tried Carbon ROM but was having reboots with that too. I liked liquidsmooth better so trying to make this work.
Click to expand...
Click to collapse
are you flashing a kernel at the same time?
I would recommend trying a basic 4.2.2 ROM right now - like unoffical AOKP.
another problem could be the GApps or GSM fix. try installing just the ROM without the GApps perhaps?
carbon was very solid too. unfortunately, I can't help you with the GSM fix, as I am CDMA.
jco23 said:
are you flashing a kernel at the same time?
I would recommend trying a basic 4.2.2 ROM right now - like unoffical AOKP.
another problem could be the GApps or GSM fix. try installing just the ROM without the GApps perhaps?
carbon was very solid too. unfortunately, I can't help you with the GSM fix, as I am CDMA.
Click to expand...
Click to collapse
Okay i will try but had this reboot issue even with the stock ROM after flashing with Utility 1.20.
jcxmej said:
Okay i will try but had this reboot issue even with the stock ROM after flashing with Utility 1.20.
Click to expand...
Click to collapse
hmm.... not really sure then. perhaps you lost root? try re-installing SuperSU - I'm just grasping at straws here.
someone mentioned a similar issue:
http://forum.xda-developers.com/showthread.php?p=44317692#post44317692
jco23 said:
hmm.... not really sure then. perhaps you lost root? try re-installing SuperSU - I'm just grasping at straws here.
someone mentioned a similar issue:
http://forum.xda-developers.com/showthread.php?p=44317692#post44317692
Click to expand...
Click to collapse
I think I have root access I had no issue with it. Okay maybe I will check the thread you gave. Anyways I tried Eclipse ROM which is based AOKP. Still had reboots. So I switched back to liquid. Anyways Im gonna keep trying the basics. If anyone has any suggestions I could try its welcome.
PS. Should I flash another kernel with the ROM just in case ? I have been only installing ROM and gapps only till now.
jcxmej said:
I think I have root access I had no issue with it. Okay maybe I will check the thread you gave. Anyways I tried Eclipse ROM which is based AOKP. Still had reboots. So I switched back to liquid. Anyways Im gonna keep trying the basics. If anyone has any suggestions I could try its welcome.
PS. Should I flash another kernel with the ROM just in case ? I have been only installing ROM and gapps only till now.
Click to expand...
Click to collapse
I don't think changing the kernel will do it.... I suspect the issue is with your recoveries - will respond in other thread....

problem after installing cm10.2

hello everybody
im kinda new her so be cool with me
i'v just installed cm10.2 latest version on my nexus 4 4.3 ver, and i'v restarted the phone, and after he worked properly and smoothly before that restart, he writes me "Unforrtunetly, System UI has stopped." after i click OK another one comes and over and over..
iv installed the latest cm nightly version, i realy need ur help!
noamp0 said:
hello everybody
im kinda new her so be cool with me
i'v just installed cm10.2 latest version on my nexus 4 4.3 ver, and i'v restarted the phone, and after he worked properly and smoothly before that restart, he writes me "Unforrtunetly, System UI has stopped." after i click OK another one comes and over and over..
iv installed the latest cm nightly version, i realy need ur help!
Click to expand...
Click to collapse
Did you wipe data/factory reset in recovery before you flashed the rom?
22sl22 said:
Did you wipe data/factory reset in recovery before you flashed the rom?
Click to expand...
Click to collapse
yea of course!
perhaps i should meantion that in the guide it says that this part of wipeing data should take time but at my case id didnt pass the 30 sec..
noamp0 said:
yea of course!
perhaps i should meantion that in the guide it says that this part of wipeing data should take time but at my case id didnt pass the 30 sec..
Click to expand...
Click to collapse
Wiping data shouldn't take long at all. When people say wipe data/factory reset when changing roms it doesn't mean wipe the whole sd card. Do you have the latest recovery version? For CWM it is 6.0.3.6 or 6.0.3.7. For TWRP it is 2.6.3.0
The correct procedure is:
Wipe data/factory reset (NOT sd card)
Wipe cache/dalvik cache
Install Rom
Install Gapps
Install SU (optional)
Reboot
22sl22 said:
Wiping data shouldn't take long at all. When people say wipe data/factory reset when changing roms it doesn't mean wipe the whole sd card. Do you have the latest recovery version? For CWM it is 6.0.3.6 or 6.0.3.7. For TWRP it is 2.6.3.0
The correct procedure is:
Wipe data/factory reset (NOT sd card)
Wipe cache/dalvik cache
Install Rom
Install Gapps
Install SU (optional)
Reboot
Click to expand...
Click to collapse
yeah i have the CWN 6.0.3.6 version, and i did it all according to this procedure except the dalvik cache wipeing and that SU? (what is it exacly)?
u think i should do this all over again? maybe it will fix somthing... also ive notice that a new cm version (20130922) is out and mine is 20130921..
what are u saying? i would prefer not to do it cuz iv already manged all my apps and settings on the phone
noamp0 said:
yeah i have the CWN 6.0.3.6 version, and i did it all according to this procedure except the dalvik cache wipeing and that SU? (what is it exacly)?
u think i should do this all over again? maybe it will fix somthing... also ive notice that a new cm version (20130922) is out and mine is 20130921..
what are u saying? i would prefer not to do it cuz iv already manged all my apps and settings on the phone
Click to expand...
Click to collapse
Redownload the ROM. Once you've downloaded just install it and wipe cache and dalvik and it should be fine.
Su, in full, Super SU is root made by Chainfire. The normal one in cm is made by Koush but you don't need to flash the Chainfire one, only do that if you have root problems
Sent from my Nexus 4
22sl22 said:
Redownload the ROM. Once you've downloaded just install it and wipe cache and dalvik and it should be fine.
Su, in full, Super SU is root made by Chainfire. The normal one in cm is made by Koush but you don't need to flash the Chainfire one, only do that if you have root problems
Sent from my Nexus 4
Click to expand...
Click to collapse
i dont have any root problems so that fine, and ill try this and edit!
EDIT: it didnt work.. iv installed the new CM ver and after deleted cache and dalvik as u sayd and still not working properly..
U should flash stock rom, after that flash your cm rom again,your issue will be solve. Good luck.
Sent from phone's neighbor wife at dreaming place
bbanana said:
U should flash stock rom, after that flash your cm rom again,your issue will be solve. Good luck.
Sent from phone's neighbor wife at dreaming place
Click to expand...
Click to collapse
r u sure it will solve it? or can i try another thing as last resort before i wipe all/?
EDIT: and another thing, if u can give a link to the stock rom ill be glad!
i realy need ur help, im realy stuck here..
i tryed wipe all and istall the new CM ver and still not working..
how do i flash that stock rom??

[Q] how to get rid of TWRPv.2.6.3.0 and install cwm recovery

i have got a defy+ and i had several different roms on it. i want to go to cwm because i plan to go to quarxs cm11 and he tells you have to update recovery. at the moment i have cm10.2-20132010-NIGHTLY-mb526 ... playstore not working....i'm looking for a way to delete TWRP or clean all old stuff and start again new? what would you recommend? thanks. I prefer a german answer
A clean install from start may avoid issues.
About the playstore not working, you tried the latest TJKV minmal gapps? The play store is working fine with both CM10 and CM10.2 for me.
Obs.: Sorry, i don't speak german.
dankeschön thanks a lot....
i'd like to make a clean install too, but how to do that?
"wipe data/factory reset" in TWRP leaves some things like TWRP itselve and for example "Pictures/Screenshots"-folder
if I select "motorola stock recovery" in bootmenu (is it called like this in english?) it fails...loop
Clean install means wipe data, cache, dalvik and system. SD card can be wiped too, but it is not mandatory, and you will need to send the files to SD card again to flash if you do that.
About the TWRP, I'm not sure, but I think that if you install CWM it will overlap TWRP. I tried once to install TWRP in a Galaxy S3 with CWM, after install, CWM disappeard and only TWRP was left.
moeloefoetsch said:
i have got a defy+ and i had several different roms on it. i want to go to cwm because i plan to go to quarxs cm11 and he tells you have to update recovery. at the moment i have cm10.2-20132010-NIGHTLY-mb526 ... playstore not working....i'm looking for a way to delete TWRP or clean all old stuff and start again new? what would you recommend? thanks. I prefer a german answer
Click to expand...
Click to collapse
There is dual recovery available in the dev section.
Thanks!!!!!
got it CWM_TWRP_v3-signed.zip
play store is working too with new gapps
but i installed quarxs cm-11-20131110-NIGHTLY-mb526.zip before and it is working fine on my defy+
browser is not working very good, some options missing but everything I need is working good enough
:good:

Tryed to install CM11 and now its boot loop

Hey all, i tried to update my cm10 to cm11, i add the file (cm11) to the phone then i went to recovery mode and installed, i had an error when, i tried to reboot my s3, then the galaxy screen was looping like 3 times and goes to recovery screen again, i cant add other version of cm or files in the phone. actualy i cant do anything... what i am trying to do now is put the cm10 but i have no idea how... i am using mac.. but having a pc computer at home.... please someone can help ?
thanks in advence.
Download stock rom and flash it with odin.
Use google.
Sent from my GT-I9300 using xda app-developers app
or you can just download another rom (I actually use SlimRom 4.3. It's really nice BTW)
download the rom, put it on external sd card. Go to recovery and
1) wipe data/factory reset
2) wipe cache
3) go to mount then format system
4) go to Advanced then format dalvik cache
5) go to install then external sd card and browse to your rom
6) Enjoy
I had issues with updating from CM10.2 to CM11 however I never got to the stage it got stuck in a bootloop although this could be due to new permissions that CM11 require. Ensure you have the latest ClockworkMod installed as that should install it correctly. I also suggest doing a wipe after installation as well as using PA Gapps if you want to used any system google apps.

Categories

Resources