Database Users

my iconia cant detect all external HDD i tried (about 10)

hi...
as the title...
who all are succeded in connecting usb external hdd to iconia ?
cause i tried with two, and booth are not recognized
one is pendrive sense 320gb, second is wd 250gb
all you who can connect, whats your hdd??
fyi, i can connect card reader and usb thumb drive
UPDATE
OKEY..
so i tried connecting my hdd through a powered usb hub, and still no luck,
i tried connect it with a Y cable, one to iconia and onte to powered hub, also no luck ...
is there any other way to try ? tried every thing from usb mount all, ntfs mount, charging while plugging , usb powered, new HDD, fat32 formatted , ntfs HDD and all in vain...
if not then, i am sure my device is defective of something....

How were they formatted? At those sizes, I'm going to guess they were formatted to NTFS which Android cannot read natively. There is, however, a thread in the Development section which includes a driver to enable NTFS support on the A500.

FloatingFatMan said:
How were they formatted? At those sizes, I'm going to guess they were formatted to NTFS which Android cannot read natively. There is, however, a thread in the Development section which includes a driver to enable NTFS support on the A500.
Click to expand...
Click to collapse
the first one have fat32 and nts partition, but the second one have 250gb full of fat32
i have installed ntfs mount and usb mount all, they just are not detected at all..

I just got my tab today, rooted and installed ntfs mount. No problems getting into my 500gig external hdd, formatted in ntfs.
Sent from my A500 using Tapatalk

I tried both 320gb Seagate and 750gb passport worked fine...They both formatted in fat32.

HM.. IT SEEMS , ONLY I CANT Get my hdd TO WORK IN ICONIA...
wonder why
is anyone here in asia or may be in indonesia??
may be this is rom related ?

l live in china ,very far from you .....
i still wait for the 3.1 update.
i am not sure can i receive ota update if i root it.
so i dont root ,and still wait.
well ,if i get the update of 3.1 ,i will come back and reply .
i have a 2T hdd, buffalo.

Okey... So now i have tried at least 6 different hdd and all failed...
I start to think ut is my hardware or rom problem?
Any solution ?

When i first connected a hdd i also thought it didn't work. When i looked at mnt/usb_storage.........no filelist. But when i got a cup of coffee and looked again the filelist was there. Apparantly the Acer needs a time to scan the HDD which can be long when it is large. So l'lle patience.
Sent from my A500 using Tapatalk

urbie47 said:
When i first connected a hdd i also thought it didn't work. When i looked at mnt/usb_storage.........no filelist. But when i got a cup of coffee and looked again the filelist was there. Apparantly the Acer needs a time to scan the HDD which can be long when it is large. So l'lle patience.
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
how long actually ??
becauuse if this problem persist, i think i will take my device to the service centre,
btw, do they will know that i am rooted ?

last update : i have connected my hdd to iconia for about an hour without any luck,.
come on, do some one here can make a solution for me please ??
i can connect flash drive and card reader but not hdd, tried 6 different of them
even i asked in local acer forum in my country, everyone dont have problem...
so, what you think my problem here?
do i must do factory reset ?

interqd said:
HM.. IT SEEMS , ONLY I CANT Get my hdd TO WORK IN ICONIA...
wonder why
is anyone here in asia or may be in indonesia??
may be this is rom related ?
Click to expand...
Click to collapse
Are you sure you have power (external) going into your HD? I tried a WD portable and it wouldn't be read by the A500 until I connected it to an external power supply. Then I could read it without any problems.

iCurmudgeon said:
Are you sure you have power (external) going into your HD? I tried a WD portable and it wouldn't be read by the A500 until I connected it to an external power supply. Then I could read it without any problems.
Click to expand...
Click to collapse
how to connect it with external power supply ?
my hdd has only 1 usb slot, not 2 ..

Guy's....just download (HP USB Disk Storage Format Tool) to format your HD's to fat32. I did my 250 & 500GB HD and it work just find. Windows just don't format right...that's why I don't use windows to format my HD's. If you have Linux use Gparted.

I have
http://forum.xda-developers.com/showpost.php?p=14129262&postcount=8
I also have a 250gb that I can't get to read but then it needs dual-powered cable to be read on my laptop so I expected that. But my 320gb Buffalo, my 32gb Patriot and my 80gb Maxtor read just fine. All are NTFS. I have a 160gb from work that I will try tomorrow.

Connect it to windows and pull up the disk administrator (where you create partitions) and see if the disk is basic or dynamic? Just a hunch... have you tried different cables? And finally I want to be sure you are plugging it into the full sized USB pert and not the micro USB.
Sent from my A500 using Tapatalk

Euclid's Brother said:
Connect it to windows and pull up the disk administrator (where you create partitions) and see if the disk is basic or dynamic? Just a hunch... have you tried different cables? And finally I want to be sure you are plugging it into the full sized USB pert and not the micro USB.
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
i am using mac, not windows, my hdd connect fine to mac, how to do this on mac?
not only different cables, yesterday i went to an it mall, there i tried almost 5 different 500gb hdd 2.5 inch, all failed, all have fat32 format, cause i checked them on my mac beforehand
yeah, of course i connect it to the usb 2.0 port..
this is what i dont understand, everyones hdd work fine in the iconia, why my iconia just cant read?

mine don't work either. I have a 1 TB western digital hard drive.

i use ntfs mount,first time install that ntfs mount apk...cant read my hdd but aftter reboot my iconia all partition on hdd can read and walk normal like on my laptop

I'm in Jakarta, so I don't think it can be a rom thing. Are you using NTFS mount, or just trying to plug the HDD into your tab and use the built-in software? Try this and it should fix the problem.

Guide to Xoom USB host with external storage

I use this USB host cable and it works great. Have tested it with my 750gb Oyen and 320gb WD Passport external HDD's, several usb flash drives (8-16gb), San disk USB memory card reader, and a USB keyboard.
For those having issues getting their Xoom to recognize USB storage devices here's what I've got and did to get it to work: I flashed my XOOM (3.1) to the 2.6.36.4 Tiamat_Xoom-v1.4.4-Full_Throttle Kernel and was unable to get the USBMount to recognize drives or storage at first. I installed USB Mass Storage Watcher from the market (it's free) and it works awesome! Can mount any storage I want (NTFS, FAT16/32, HFS, HFS+, EXT2, ETX3, EXT4) with any capacity. I think this app will work with any rooted Xoom (or other devices). Under my Kernel my USB host is located under/usbOTG.
Hope this helps.

Thanks for your post, im having trouble getting my Wifi Xoom usb host to work, i have tried making a cable from the tutorials around here and i have also bought an OTG cable but didn't get any luck having it working, im on HC 3.2 Tiamat 2.1.0 Tachi stock GPU , i tried installing busybox - OTG watcher - Drive Mount etc. and followed all kind of guides in the forum and on google with no luck, i tried usb mice , more than 6 flash drives, usb 3g dongles and other devices without any indication of any kind of connection or powering up, so most probably the problem would be from the cable...as i ordered xoom usb otg cables from ebay and until i receive them i was wondering if there might be anything i was missing?

hunix said:
Thanks for your post, im having trouble getting my Wifi Xoom usb host to work, i have tried making a cable from the tutorials around here and i have also bought an OTG cable but didn't get any luck having it working, im on HC 3.2 Tiamat 2.1.0 Tachi stock GPU , i tried installing busybox - OTG watcher - Drive Mount etc. and followed all kind of guides in the forum and on google with no luck, i tried usb mice , more than 6 flash drives, usb 3g dongles and other devices without any indication of any kind of connection or powering up, so most probably the problem would be from the cable...as i ordered xoom usb otg cables from ebay and until i receive them i was wondering if there might be anything i was missing?
Click to expand...
Click to collapse
Sounds like your cable is not OTG. A lot of them are not. Try it again with your Moto cable when it comes. Also, try rebooting with the cable and drive plugged in, with OTG Watcher running. That has worked for me in the past.

Xoom 3G, stock FW 3.2, non rooted and ot cable
So - just installed USB Mass Storage Watcher OTG - https://market.android.com/details?i...tcherotg&hl=pl
Pendrive is recognized by the program immediately and displays the mount point /dev/block/sda - but unfortunately the next value is 0MB. And this is like that on every pendrive. Do I need root to mount it, or do you have any other idea to mount my pendrive without root?

sdsi said:
Xoom 3G, stock FW 3.2, non rooted and ot cable
So - just installed USB Mass Storage Watcher OTG - https://market.android.com/details?i...tcherotg&hl=pl
Pendrive is recognized by the program immediately and displays the mount point /dev/block/sda - but unfortunately the next value is 0MB. And this is like that on every pendrive. Do I need root to mount it, or do you have any other idea to mount my pendrive without root?
Click to expand...
Click to collapse
You do need root to mount the drive-to use Xoom in USB Host Mode.

Only root? Is that all that needs to be done?

spinstartshere said:
Only root? Is that all that needs to be done?
Click to expand...
Click to collapse
You need a kernel or rom that supports OTG. Tiamat Odachi kernel, Moray rom, the 4G rom, and the Rogue Rana kernel should all support usb host mode. You will also need a real otg cable and probably an app that helps you mount the drive, such as USB Mount All or Drive Mount.

okantomi said:
You need a kernel or rom that supports OTG. Tiamat Odachi kernel, Moray rom, the 4G rom, and the Rogue Rana kernel should all support usb host mode. You will also need a real otg cable and probably an app that helps you mount the drive, such as USB Mount All or Drive Mount.
Click to expand...
Click to collapse
it works great on rooted stock kernel 3.2 with "Drive Mount" but from the market you can not install "Drive Mount" it says not supported.

If the program is free could someone post the apk?
Sent from my Xoom using xda premium

3devious said:
If the program is free could someone post the apk?
Sent from my Xoom using xda premium
Click to expand...
Click to collapse
busybox also needed
it is free and here is it

I have xoom wifi usa version with 4.0 version that is recently released.
my xoom is NOT ROOTED.
with new version of andriod os, am i able to read/write to USB drive Or still need rooted?
thanks in advance.

uhs74 said:
I have xoom wifi usa version with 4.0 version that is recently released.
my xoom is NOT ROOTED.
with new version of andriod os, am i able to read/write to USB drive Or still need rooted?
thanks in advance.
Click to expand...
Click to collapse
Just tried with a genuine motorola OTG cable, which works with the same stick because I used it for upgrading my UK one to US ICS 4.0.3, and it doesn't work without rooting. I still can't root mine yet because my micro SD card for backup hasn't come!

hello
i have wifi xoom android 4.0 rooted with timat kernal
the usb host mount fine but i coudln't found the files in the file explorer
when i mount hard drive fat 32
also when i mounted the ntfs hard drive it shows me 0mb in the usb mount app !
what is the problem

read usb drive from rooted xoom
i have rooted my xoom (wifi usa)based on http://forum.xda-developers.com/showthread.php?t=1446469
I installed stickmount app (https://market.android.com/details?id=eu.chainfire.stickmount&hl=en) from market.
i used Micro USB Male to USB A Female Adapter (http://www.amazon.com/Micro-USB-Mal...YMU6/ref=sr_1_2?ie=UTF8&qid=1329151612&sr=8-2)
once connected to xoom the usb drive ,StickMount app recognize and mount it on specific drive (folder) which display on screen for some duration.
then goto "ES file explorer" or "Astro file explorer" and select that folder and you can see the contents of usb drive.
usb drive should be in format Fat32 mode.I have not tried with NTFS or other format.
Hope this helps somebody.

uhs74 said:
i have rooted my xoom (wifi usa)based on http://forum.xda-developers.com/showthread.php?t=1446469
I installed stickmount app (https://market.android.com/details?id=eu.chainfire.stickmount&hl=en) from market.
i used Micro USB Male to USB A Female Adapter (http://www.amazon.com/Micro-USB-Mal...YMU6/ref=sr_1_2?ie=UTF8&qid=1329151612&sr=8-2)
once connected to xoom the usb drive ,StickMount app recognize and mount it on specific drive (folder) which display on screen for some duration.
then goto "ES file explorer" or "Astro file explorer" and select that folder and you can see the contents of usb drive.
usb drive should be in format Fat32 mode.I have not tried with NTFS or other format.
Hope this helps somebody.
Click to expand...
Click to collapse
You got it to work using that USB adapter? That's not a USB OTG adapter. It really shouldnt work using that one.

derek4484 said:
You got it to work using that USB adapter? That's not a USB OTG adapter. It really shouldnt work using that one.
Click to expand...
Click to collapse
Oh i got it wrong link but i used OTG adapter.

derek4484 said:
You got it to work using that USB adapter? That's not a USB OTG adapter. It really shouldnt work using that one.
Click to expand...
Click to collapse
How's that digger from a USB ORG adapter? Just curious.
Sent from my ADR6350 using Tapatalk

Everything works only if its Fat32. NTFS needs new kernal loaded. I am Rooted but Stock. 4.0.4.

Reboot loop after trying to get external USB to work
My Xoom WiFi running Team EOS build 102 would not see my USB drives. I installed 'USB Mass Storage Watcher' from the market. This app then prompted me to install the OTG version. I followed instruction and removed original version before install the OTG version. The OTG version also prompted me to down load another version of Busy Box, which I did.
I could then see one of my USB (see size and space used), but could not see files or folders in the mount location. I restarted my Xoom (I live in a windows world and reboot fixes a lot of issues LOL), Xoom got stuck in reboot loop. I went into recovery mode and clear my Dalvik, but this had no effect on reboot loop.
Luck for me I had a Nandroid backup from 2 days earlier (pheew). Restored this and back to normal.
Not sure if anyone has had this problem, but I strongly recommended making nandroid backup before doing any device driver updates.

No Prob...
im on the same software version as u, i connected usb drives, mouse and keyboard without any problems, just wanted to let u kno

USB OTG + stickmount

I bought a brand new 64gb flash drive to use with my nexus 7 but while it works fine initially in windows it then shows up on the n7 as 'damaged usb stick'. Then when i plug it back in pc it requests reformatting.
I have successfully been using a 4gb flash drive on the n7 with stickmount though.
So it it possible my brand new flash drive is corrupt or are there limitations with n7 and stick mount that make it very 'hit and miss'?
Anyone else had similar issues?
Sent from my Nexus 7 using Tapatalk 2

I use centon datastick 64GB just fine.
To mount I use USB OTG Helper
http://forum.xda-developers.com/showthread.php?t=1588979
dangeroid said:
I bought a brand new 64gb flash drive to use with my nexus 7 but while it works fine initially in windows it then shows up on the n7 as 'damaged usb stick'. Then when i plug it back in pc it requests reformatting.
I have successfully been using a 4gb flash drive on the n7 with stickmount though.
So it it possible my brand new flash drive is corrupt or are there limitations with n7 and stick mount that make it very 'hit and miss'?
Anyone else had similar issues?
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse

[Q] USB host controller issue

No device connected to the micro USB host through OTG cable is detected. Neither mouse nor keyboard or (micro) SD Card. The kernel claims to support USB host controllers. Checked with three different OTG cables, all sold claiming to work with Nexus 7.
Everything was also checked on stock ROM and kernel (JDQ39) unrooted and rooted.
Same cables work like charm with my i9305 Galaxy S 4 LTE just as Stickmount and Nexus 7 Media Importer (mouse, keyboard, storage).
Nothing works however with my Nexus 7. I feel very frustrated and cannot resolve this issue no matter what I try.
Any ideas?
Thanks
Nexus 7 grouper, rooted, Stickmount, Busybox installed
OS: JDQ39 based Smooth rom 5.1
Kernel: M-Kernel 3.1.10

Try a different kernel... Bugs do happen so OTG might be brought ken on that kernel.
Sent from my Nexus 7 using xda premium

PS: I know bricked worked, I thought Franco's worked too. Dunno bout M-Kernel, I actually avoided that kernel because it didn't look like USB-OTG support was in it when I searched the thread.

Thanx answering
I'll try Franko. As I remember, M-kernel has OTG support. But
Shouldn't even stock kernel support keyboard and mouse over OTG?
And why does the Nexus Media Importer app not work either? That
doesn't even take root...

raymundka said:
Thanx answering
I'll try Franko. As I remember, M-kernel has OTG support. But
Shouldn't even stock kernel support keyboard and mouse over OTG?
And why does the Nexus Media Importer app not work either? That
doesn't even take root...
Click to expand...
Click to collapse
Depends on how you're implementing it. I know with apps like StickMount and OTG Helper, they won't automatically start media scanner on the new device unless you have the paid version.
The rom in my Sig actually has USB-OTG support for the Nexus 7 built in (would still need a kernel that supports it of course), so it automatically mounts a thumbdrive, and it shows up under Settings -> Storage , and shows as USB Storage and you can unmount it from there, acts just like an SD card would on other phones. Only downside is no exFat support (nor NTFS I think). Stickmount can do it but you have to provide the exfat binaries in /sdcard.

kbeezie said:
Depends on how you're implementing it. I know with apps like StickMount and OTG Helper, they won't automatically start media scanner on the new device unless you have the paid version.
The rom in my Sig actually has USB-OTG support for the Nexus 7 built in (would still need a kernel that supports it of course), so it automatically mounts a thumbdrive, and it shows up under Settings -> Storage , and shows as USB Storage and you can unmount it from there, acts just like an SD card would on other phones. Only downside is no exFat support (nor NTFS I think). Stickmount can do it but you have to provide the exfat binaries in /sdcard.
Click to expand...
Click to collapse
Stickmont free detects connected USB storage immediately and mounts it. The USB drive and the files on the device connected by
OTG can be seen by any file explorer in a normal case. Also, when connecting mouse and/or keyboard (even wireless)
via OTG/OTG&USB hub a USB icon and a USB device connected message should pop up in the notification
bar. Nexus Media Importer app should also see the connected device if formatted FAT32.
At least, that's how it works on my Galaxy S3 using the same hardware ( 3 different OTG cables,
mouse, keyboard, USB sticks, memory cards, etc.)
I have flashed four different kernels (M, Motley, Franko, Stock). There is a significant difference in
performance but unfortunately not in USB host device detection behaviour.
I do appreciate all your helping effort. Thx

[Q] USB OTG question

I have the international version of the LG G2 32gb. Stock rooted with exposed framework, one or two navbar/statusbar modules installed.
I have tried a small 4gb usb drive and the G2 recognises it just fine. I have nothing bigger except for an old (perfectly working) 100gb usb external hard disk drive ntfs format. it doesn't rely on any power. USB cable from PC powers it just fine.
So when I connect this drive via USB OTG, my G2 simply doesn't see it. I've waited more than half hour to see if it is performing a media scan silently but it still doesn't show on any of my file explorers such solid and root explorer and stock one ofcourse.
Does anyone have any ideas?
Is it because it is an external hdd?
Is it because the phone can't power it on its own?
Is it that it can read only smaller cards less than 100gb? I don't have access to anything else to test.
Is USB OTG supported in aosp roms like pac man?
Thanks guys.

subhani said:
I have the international version of the LG G2 32gb. Stock rooted with exposed framework, one or two navbar/statusbar modules installed.
I have tried a small 4gb usb drive and the G2 recognises it just fine. I have nothing bigger except for an old (perfectly working) 100gb usb external hard disk drive ntfs format. it doesn't rely on any power. USB cable from PC powers it just fine.
So when I connect this drive via USB OTG, my G2 simply doesn't see it. I've waited more than half hour to see if it is performing a media scan silently but it still doesn't show on any of my file explorers such solid and root explorer and stock one ofcourse.
Does anyone have any ideas?
Is it because it is an external hdd?
Is it because the phone can't power it on its own?
Is it that it can read only smaller cards less than 100gb? I don't have access to anything else to test.
Is USB OTG supported in aosp roms like pac man?
Thanks guys.
Click to expand...
Click to collapse
NTFS
That's your problem friend... Format it to FAT32 or root and use this
Cheers!

Really? Wow, I'm gonna have to transfer all those files from the hard drive first and then format right? I hope my G2 would recognise it then. I'll post an update soon as I can get my hands on another HDD to back up to before format.
Thanks.
Sent from my G2 using tapatalk

The only thing is, my other small USB drive which did work via USB OTG is also NTFS format. Why would this work and not the larger capacity external HDD?
Sent from my G2 using tapatalk

subhani said:
The only thing is, my other small USB drive which did work via USB OTG is also NTFS format. Why would this work and not the larger capacity external HDD?
Sent from my G2 using tapatalk
Click to expand...
Click to collapse
Are you 100% certain the other one is NTFS?
Android is not NTFS compatible out of the box (unless rooted).
Cheers!

Yes I'm sure. The 4gb USB stick that works over otg cable is actually what I used to create a quick recovery drive of my win8 laptop as soon as I unboxed it. Win8 requires the flash drive to be NTFS for the recovery image to be created. So I did as it asked and formated and it produced the recovery drive on it.
I now connect it to my G2 and it recognises the flash drive and it shows the contents as recovery files for windows.
Sent from my G2 using tapatalk

Tldr both drives are NTFS format.
Sent from my G2 using tapatalk