Related
First, take your own risk!
Be sure you knwo what you are doing now and familiar with fastboot and your Xoom.
I am not responsible for anything.
The following founding are just proved to be work on my Xoom and I guarantee nothing.
===========================================
Rom Source:
Obtained from this thread
[!!Thanks changguangyu for his (and his fd's) kind sharing!!]
http://forum.xda-developers.com/showthread.php?p=21096478
Download the leaked rom
Extract the sbf using "MotoAndroidDepacker v1.3"
CG57.smg rename to recovery.img
CG58.smg rename to boot.img
CG59.smg rename to system.img
Issue the following command:
fastboot oem unlock
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot erase cache
fastboot erase userdata
fastboot reboot
Done.
Tried on my own Hong Kong Wifi version Xoom(MZ604).
Run smoothly.
can this be flash to canadian xoom ?
Probably can but I would probably wait for eos version with the good bits taken out....
Sent from my HTC Desire using xda premium
thanks ...good to go
In case somebody wondering where to find MotoAndroidDepacker
http://www.mediafire.com/?pk0gb8tgxg4uecg
My phone is now turning off at 30% so I'm sending it in under warranty to Huawei. Has anyone else done this? Did you put your phone back to stock?
Yes I did in November. Wouldn't boot the nougat rom and just hung on the Google screen. Tried absolutely everything via ADB twrp and sdk windows and Mac. No joy. So I relocked the bootloader then flashed the stock MM rom. Still no joy and basically screwed as stuck in the Google screen. I rang Huawei UK and they authorised a RTM repair. They changed the motherboard and the same phone came back with a new imei letter and sticker. It's been fine since and happily running Pure Nexus 7.1.2 with Franco and magisk. :laugh:
I sent mine for repair and I'm in the UK. Although I did it through my carrier (EE) not Huawei. You really want to put everything back to stock, you don't want any reason for them to deny you warranty or anything. Flash the latest images from the Google nexus page then relock the bootloader. That should be all you need to do, I've sent mine back twice and did that. They knew anything.
Followed Step 10 in Heisenbergs post
https://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
But its been on the spinning Google logo for about 20 minutes now...
Exact steps I carried out:
1. Go to Settings/Backup & Reset and perform a factory data reset.
2. Download the appropriate factory images (7.1.2 (N2G47O, May 2017))
3. Unzip the angler-xxxxxx-factory-xxxxxxxx C:\angler\)
4. Move the following files to a new directory named C:\angler\images\
-bootloader-angler-angler-03.68.img
-radio-angler-angler-03.81.img
5. Within C:\angler\angler-xxxxxx\ you'll see another zip archive named image-angler-xxxxxx, unzip the contents of that zip into the C:\angler\images\ folder we created before. Now within C:\angler\images\ you should have the following files:
-boot.img
-bootloader-angler-angler-03.68.img
-radio-angler-angler-03.81.img
-recovery.img
-system.img
-userdata.img
-vendor.img
6.Boot into the bootloader and connect your phone to your PC via usb cable,enter these commands to flash:
fastboot flash bootloader C:\angler\images\bootloader-angler-angler-03.68.img
fastboot reboot-bootloader
fastboot flash radio C:\angler\images\radio-angler-angler-03.81.img
fastboot reboot-bootloader
fastboot flash boot C:\angler\images\boot.img
fastboot erase cache
fastboot flash recovery C:\angler\images\recovery.img
fastboot flash system C:\angler\images\system.img
fastboot flash vendor C:\angler\images\vendor.img
7. Then I rebooted.
Could it be because I 'fastboot erase cache'?
vinokirk said:
Exact steps I carried out:
1. Go to Settings/Backup & Reset and perform a factory data reset.
2. Download the appropriate factory images (7.1.2 (N2G47O, May 2017))
3. Unzip the angler-xxxxxx-factory-xxxxxxxx C:\angler\)
4. Move the following files to a new directory named C:\angler\images\
-bootloader-angler-angler-03.68.img
-radio-angler-angler-03.81.img
5. Within C:\angler\angler-xxxxxx\ you'll see another zip archive named image-angler-xxxxxx, unzip the contents of that zip into the C:\angler\images\ folder we created before. Now within C:\angler\images\ you should have the following files:
-boot.img
-bootloader-angler-angler-03.68.img
-radio-angler-angler-03.81.img
-recovery.img
-system.img
-userdata.img
-vendor.img
6.Boot into the bootloader and connect your phone to your PC via usb cable,enter these commands to flash:
fastboot flash bootloader C:\angler\images\bootloader-angler-angler-03.68.img
fastboot reboot-bootloader
fastboot flash radio C:\angler\images\radio-angler-angler-03.81.img
fastboot reboot-bootloader
fastboot flash boot C:\angler\images\boot.img
fastboot erase cache
fastboot flash recovery C:\angler\images\recovery.img
fastboot flash system C:\angler\images\system.img
fastboot flash vendor C:\angler\images\vendor.img
7. Then I rebooted.
Could it be because I 'fastboot erase cache'?
Click to expand...
Click to collapse
I doubt that would be the issue. Give it a bit more time, these things often take a while to boot first time. You dont't have to extract everything and do the individual commands though. After the first unzip there is a flash-all.bat (assuming you're on windows), just run that with adb/fastboot files added to that directory
Just an FYI type thing that may save people a bit of digging around sometime.
I tried to get the update that just came out, but as i had TWRP as recovery, no good. Anyhow, in my trying i completely bollixed the phone. Would start, but always booted to TWRP and had various conniptions. Could not even get a TWRP backup to load. Strange not encountered before by me stuff............
Anyhow, recovered by the following method to stock and am back in business.
Boot into bootloader fastboot mode.
Extract .xml.zip format firmware file:
eg: CEDRIC_NPP25.137-15_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
to a folder on c drive of the PC that has the ADB and fastboot files in it.
In command prompt cd\ to that directory.
fastboot flash the following in sequence.
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk1
fastboot flash system system.img_sparsechunk2
fastboot flash system system.img_sparsechunk3
fastboot flash system system.img_sparsechunk4
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
boots to stock .
Not my own work, adapted from this thread by t-bon3
https://forum.xda-developers.com/showthread.php?t=2542219
which I found thanks to eens post18 at this thread
https://forum.xda-developers.com/g5/how-to/npp25-137-33-stock-firmware-moto-g5-t3577084/page2
After this, Motorola system update installed. On Australian XT1676 is build number NPP25.137-15-7
Patch level 1-May-2017
Still get the I cant be trusted page on power up as have unlocked bootloader.
Many thanks to all at XDA, its a resource that can certainly get you into trouble, but then out of it again.
where do you get the stock firmware?
Think I worked out what I did wrong. Somehow, I changed the format of the data partition. Fat fingers at some point??
TWRP backups didn’t like that and would not mount or write to the data partition as it was not f2fs format that the backup had been made in??
Anyway, restored data from a TWRP backup after going to ....wipe…format data. All good.
That gave me the passcode lockout issue at next reboot which can deal with.
stock Firmware? http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=25
for me stock the phone came with is: CEDRIC_NPP25.137-15_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Worked on my XT1676 dual sim, but CHECK if its appropriate for your model. There are files on that page that wont be and flashing some of their components (particularly bootloader), can i have read, be unrecoverable disastrous. Be warned.
Slow, but got it. At first i thought it was corrupt as TWRP wouldn't flash it. My gumby. The .xml.zips apparently need to be extracted and flashed file by file.
We're you able to revert to a locked bootloader after this, I am looking forward to do so
We're you able to revert to a locked bootloader after this, I am looking forward to do so
Click to expand...
Click to collapse
didnt try, didnt need to for taking take the update.
And, from my reading there is no way so far to relock the bootloader. I got it to stock, with stock recovery, and that was enough for me.
astmacca said:
didnt try, didnt need to for taking take the update.
And, from my reading there is no way so far to relock the bootloader. I got it to stock, with stock recovery, and that was enough for me.
Click to expand...
Click to collapse
I can confirm what you said, but I am asking because I am sick of the warning before the device starts
ap4ss3rby said:
I can confirm what you said, but I am asking because I am sick of the warning before the device starts
Click to expand...
Click to collapse
You can get rid of that easily
Put phone in fastboot mode
Download logo from link below
Enter the following in a windows command prompt where you have fastboot files & the logo file
Code:
fastboot.exe flash logo logo-g5-fix.bin
http://drive.google.com/file/d/0B-idWfPYugGvREJaR3B0UFIxUkU/view?usp=sharing
TheFixItMan said:
You can get rid of that easily
Put phone in fastboot mode
Download logo from link below
Enter the following in a windows command prompt where you have fastboot files & the logo file
Code:
fastboot.exe flash logo logo-g5-fix.bin
http://drive.google.com/file/d/0B-idWfPYugGvREJaR3B0UFIxUkU/view?usp=sharing
Click to expand...
Click to collapse
Thanks, but this is why I made a Google pixel themed logo.bin and used a matching boot animation to go with it some time earlier
downgrade
thanks for the guide
- can i use this method to downgrade to this version?
- can i do this without unlocking the bootloader
- if it goes wrong can i unlock the bootloader later (i have an unlock code)
- is there a reason why we don't flash sparsechunk.0 ?
thanks in advance
distclean said:
thanks for the guide
- can i use this method to downgrade to this version?
- can i do this without unlocking the bootloader
- if it goes wrong can i unlock the bootloader later (i have an unlock code)
- is there a reason why we don't flash sparsechunk.0 ?
thanks in advance
Click to expand...
Click to collapse
No you cannot downgrade (same firmware version or newer required)
Yes - unlocked bootloader not required
As long as your phone still goes into the bootloader
You should flash all sparsechunks in number order
Thanks a bunch,
So to be absolutely clear, my phone shipped with NPP25.137-15-7 i can't install the stock rom linked, and the same version isn't out yet,
if i unlock the bootloader, would i be able to downgrade ?
Is the software channel setting preserved across this method?
distclean said:
Thanks a bunch,
So to be absolutely clear, my phone shipped with NPP25.137-15-7 i can't install the stock rom linked, and the same version isn't out yet,
if i unlock the bootloader, would i be able to downgrade ?
Is the software channel setting preserved across this method?
Click to expand...
Click to collapse
You maybe able to - there are different variants of the same phone
As long as the firmware is the same or newer (as in the bootloader and API version) it may flash
It will either flash or error out
There's only one way to find out - if your phone is dead anyway it's not going to make alot of difference
No - generally you can never downgrade firmware - doing so would be dangerous and you may loose the bootloader for good
thanks again,
motoboot.img is the bootloader you talk about? is the partition layout described somewhere? would custom roms use a different one here?
do tell me by the way if i should get this information elsewhere/if i should read something to get started in the whole moto g world.
distclean said:
thanks again,
motoboot.img is the bootloader you talk about? is the partition layout described somewhere? would custom roms use a different one here?
do tell me by the way if i should get this information elsewhere/if i should read something to get started in the whole moto g world.
Click to expand...
Click to collapse
You can write in adb
Code:
adb shell
cat /proc
cat /proc/partitions
Hello,
Does anyone know where can I download the latest firmware for Moto G5 XT1676 baseband Version: m8937_ 8000.122.02.40 R
Thanks
astmacca said:
Boot into bootloader fastboot mode.
Extract .xml.zip format firmware file:
eg: CEDRIC_NPP25.137-15_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
to a folder on c drive of the PC that has the ADB and fastboot files in it.
In command prompt cd\ to that directory.
fastboot flash the following in sequence.
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk1
fastboot flash system system.img_sparsechunk2
fastboot flash system system.img_sparsechunk3
fastboot flash system system.img_sparsechunk4
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
boots to stock .
Click to expand...
Click to collapse
You're partially right. These commands won't work for our files. You have to flash the firmware according to the instructions contained within the "flashfile.xml" file within the archive. For example we have no "motoboot" partition
I've flashed every stock package available now (4 I think) and haven't been offered an update once. I've ran a couple of custom ROMs but they're just not right in one way or another. Might be time to move on.
distclean said:
Thanks a bunch,
So to be absolutely clear, my phone shipped with NPP25.137-15-7 i can't install the stock rom linked, and the same version isn't out yet,
if i unlock the bootloader, would i be able to downgrade ?
Is the software channel setting preserved across this method?
Click to expand...
Click to collapse
I upgraded to this and since then can't downgrade the phone to the stock roms available online. From memory trying to flash gpt.bin gave a "Security version downgrade" error. So I wouldn't assume you'll be able to downgrade and until there is a copy of this particular firmware, you won't be able to flash back or relock the bootloader
astmacca said:
Think I worked out what I did wrong. Somehow, I changed the format of the data partition. Fat fingers at some point??
TWRP backups didn’t like that and would not mount or write to the data partition as it was not f2fs format that the backup had been made in??
Anyway, restored data from a TWRP backup after going to ....wipe…format data. All good.
That gave me the passcode lockout issue at next reboot which can deal with.
stock Firmware? http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=25
for me stock the phone came with is: CEDRIC_NPP25.137-15_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Worked on my XT1676 dual sim, but CHECK if its appropriate for your model. There are files on that page that wont be and flashing some of their components (particularly bootloader), can i have read, be unrecoverable disastrous. Be warned.
Slow, but got it. At first i thought it was corrupt as TWRP wouldn't flash it. My gumby. The .xml.zips apparently need to be extracted and flashed file by file.
Click to expand...
Click to collapse
Is this ROM is good to my XT1676 Baseband: M8937_11.16.02.51R ?
astmacca said:
Think I worked out what I did wrong. Somehow, I changed the format of the data partition. Fat fingers at some point??
TWRP backups didn’t like that and would not mount or write to the data partition as it was not f2fs format that the backup had been made in??
Anyway, restored data from a TWRP backup after going to ....wipe…format data. All good.
That gave me the passcode lockout issue at next reboot which can deal with.
stock Firmware? http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=25
for me stock the phone came with is: CEDRIC_NPP25.137-15_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Worked on my XT1676 dual sim, but CHECK if its appropriate for your model. There are files on that page that wont be and flashing some of their components (particularly bootloader), can i have read, be unrecoverable disastrous. Be warned.
Slow, but got it. At first i thought it was corrupt as TWRP wouldn't flash it. My gumby. The .xml.zips apparently need to be extracted and flashed file by file.
Click to expand...
Click to collapse
Hi, i own the same model of moto g5, i do this in fastboot window
fastboot erase userdata
now the phone only boot in twrp and show a message "failed to mount /data". i think that delete my userdata partition, how could i fix it?
once i can avoid this loop in twrp, i follow these steps to flash stock rom
thanks in advance
juan
I do not know whether my EFS and Persist are intact but I have backed them up. I had installed Pixel Experience 9.0 and then restored my TWRP backup to go to Stock Oreo, Build Number: OPSS28.85-13-5. This is my current Build, unlocked, rooted and has TWRP.
Can I follow this (https://forum.xda-developers.com/g5-plus/development/stock-firmware-npn25-137-67-5-fastboot-t3694738) guide to go back to Stock Nougat and then upgrade to the latest official update from moto?
I am asking to confirm as the Stock ROM given in the guide is Nougat ROM and I am on Oreo as mentioned above. I won't have any problems right? I do not want to lose VoLTE and my IMEI.
Any help will be appreciated.
Installed Oreo ROM via fastboot on my Moto G5 Plus [RETIN/Indian/ XT1686]
I am sharing my experience here so that it might help someone looking to flash stock ROM via fastboot. This is not meant to be a tutorial, but I will list out the steps I followed. I am not responsible if you mess up or hard/soft brick your device when following the steps I mentioned below. Always make a backup of your data/photos/videos/music and whatever else. Also make a backup with TWRP to be safe.
So instead of following the guide linked in the above post, I followed this one and successfully unrooted and returned to stock: https://forum.xda-developers.com/g5-plus/how-to/moto-g5-plus-fastboot-flash-stock-oreo-t3848433
But I did not use the ROM linked by the OP in that thread. Instead I downloaded this one : https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
This RETIN ROM works for me because I have the Indian XT1686. I don't know if it matters but I had the same version (13-5) before, but I am not sure whether it was RETAIL or RETIN.
Anyways guys make sure you download the right ROM for your device if you are going to install via fastboot. You can download the right ROM for your device from here: https://mirrors.lolinet.com/firmware/moto/potter/official/
There are different folders for ROMs of different regions in the above link. So carefully download the one your device is compatible with.
Also, I installed fastboot drivers from here: https://forum.xda-developers.com/showthread.php?t=2588979
Follow the instructions and also follow the video tutorials in the post to install fastboot drivers if your phone isn't detected in fastboot.
Then once I had downloaded the ROM and installed ADB, I extracted the ROM zip into a folder. Copy pasted ADB Files into the same folder (download ADB Files that worked for me _ attached to this post below).
FInally I put my phone in fastboot (turn off phone, then press volume down and power simultaneously till fastboot shows up). Connected the phone to my PC. Then opened CMD in the folder where I had extracted the ROM and copy pasted the ADB Files. To open cmd in a folder, just type cmd in the address bar of the folder and press enter.
And then I copy pasted the following code into the cmd window:
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
The above commands will run when pasted in cmd and your phone will be flashed with the ROM. It took a couple minutes to install and then I had to press enter while still in cmd to reboot the phone. Then the phone rebooted. Took a couple minutes more to boot, so stay patient. Then once the phone booted, I disconnected it from my PC and set the phone up as usual. DO NOT disconnect the phone when the fastboot commands are running and the ROM is being flashed. Note that the above fastboot commands will only flash the ROM. It will not lock the bootloader.
If you want to lock the bootloader then follow the instructions here: https://forum.xda-developers.com/g5-plus/how-to/moto-g5-plus-fastboot-flash-stock-oreo-t3848433
Note that I haven't locked my bootloader. So you will have to try and see for yourself whether it locks your bootloader.
Also once I booted up I got update notification and was able to update to the Feb 2019 OTA security update. So I can for sure say that updates work. VoLTE, calling, camera, almost everything I checked works.
Cheers. :victory:
Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus 8 in fastboot-bootloader mode (Power and volume + and volume-);
Connect the OnePlus 8 to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.
DOWNLOAD
All roms on Sourceforge: https://sourceforge.net/projects/fastbootroms/files/OnePlus 8
BRANDED PHONE
For now branded device are not supported
MANUAL FLASH: Windows - OSX - Linux
If you want to manual flash these roms these are the commands (You need the latest sdk platform tools, you can find it here
Is reccomended to format data or the rom cannot boot:
Code:
fastboot -w
Others Commands to flash a fastboot rom
Code:
fastboot flash aop aop.img
fastboot flash bluetooth bluetooth.img
fastboot flash boot boot.img
fastboot flash dsp dsp.img
fastboot flash dtbo dtbo.img
fastboot flash LOGO LOGO.img
fastboot flash modem modem.img
fastboot flash oem_stanvbk oem_stanvbk.img
fastboot flash qupfw qupfw.img
fastboot flash storsec storsec.img
fastboot flash multiimgoem multiimgoem.img
fastboot flash uefisecapp uefisecapp.img
fastboot flash recovery recovery.img
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
fastboot flash opproduct opproduct.img
fastboot reboot fastboot
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash product product.img
fastboot reboot
REMEMBER
"Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
If the device automatically reboot in Stock Recovery mode don't reboot it and wait the flash end.
These ROMs can't be used to update or downgrade your phone but just to restore your phone.
If the rom seems doesn't start go in recovery stock and follow this guideline: English -> Wipe data and cache -> Erase everything.
If you want to rebrand your phone from HydrogenOS to OxygenOS you can follow this guide: Rebrand Guide
If you want you can use also my tool to flash Factory Images, unlock bootloader, flash twrp or to understand if the device is recognized: https://toolaio.tk/
If you got some problems like write error or no partition, check this: https://forum.xda-developers.com/showpost.php?p=76658555&postcount=34
DONATE LINK
If you want to support this and others my projects please consider making a donation, thanks.
Branded devices is for example a Chinese version with HydrogenOS to which OxigenOS has been installed? If so, how can a branded device be recovered?
Thanks
Hi guys, i'm here again to ask for your support, actually with android 10 Google introduced a lot of changing, from dynamic partitions to the new keymaster 4 encryption/decryption. Teamwin is working hard to update TWRP but they will still take some time. Currently some things already work but there are difficulties in bringing them to the OnePlus 8/8 Pro, for example decryption already works but creates some problems on the OnePlus devices. That's why I decided to create a Paypal moneybox to be able to bring you the latest updates in the shortest time possible. As I have previously done, I assure you of a support of at least 2 years (within the limits of my possibilities). In addition to the TWRP I will improve the fastboot roms and add OnePlus 8/8 Pro to my TOOL ALL IN ONE (and maybe I will also bring the RevengeOS). By getting hold of a OnePlus 8 or 8 Pro I will also be able to improve the TWRP for OnePlus 7T and 7T Pro.
OnePlus 8/8 Pro PayPal MoneyBox: https://www.paypal.com/pools/c/8pfrIOL3Qa
If you are unable to participate in the PayPal moneybox, you can make a normal donation (perhaps specifying that it is for the moneybox), however all private donations that I will receive for this or other projects will be included in the moneybox.
Private PayPal Donations: https://www.paypal.me/MauronofrioTool
Why after flash it, it boot up to Qualcomm crashdump mode and how to fix?
sakun-ice said:
Branded devices is for example a Chinese version with HydrogenOS to which OxigenOS has been installed? If so, how can a branded device be recovered?
Thanks
Click to expand...
Click to collapse
I think unbranded devices mean the device bought from T-Mobile or Verizon. Nothing to do with chinese versiion flash oxygenOS, if I'm not wrong.
Can't seem to get this to work. I'm trying to flash a stock rom for my OnePlus 8 after bricking it during a rooting process.
The device' bootloader is obviously unlocked and i can get the phone into Fastboot mode and connected to my PC.
The only issue is when i execute the flash-all.bat file, it can't seem to flash any of the files and gives an error consisting of the message "FAILED (remote: 'Flashing is not allowed for Critical Partitions').
What to do guys? Can anyone help me out.
Does anyone know where to find mobile oneplus 8 5g tmobile from mine is bricked I had same error as post above
KJStar said:
Can't seem to get this to work. I'm trying to flash a stock rom for my OnePlus 8 after bricking it during a rooting process.
The device' bootloader is obviously unlocked and i can get the phone into Fastboot mode and connected to my PC.
The only issue is when i execute the flash-all.bat file, it can't seem to flash any of the files and gives an error consisting of the message "FAILED (remote: 'Flashing is not allowed for Critical Partitions').
What to do guys? Can anyone help me out.
Click to expand...
Click to collapse
Try to flash fastboot rom with "tool all in one),It worked for me.
I needed modem I forgot to fastboot reboot fastboot guy in post 6 that's all you need to do is reboot fastboot then flash all I was looking for different file
Never mind I fixed it by downloading ota and going to system updates in settings because fastboot won't flash to modem right
I am having issues flashing. flashing not allowed on critical partition. please help I tried to use the large address aware program but nothing has changed.
bluemoel said:
I am having issues flashing. flashing not allowed on critical partition. please help I tried to use the large address aware program but nothing has changed.
Click to expand...
Click to collapse
Make sure your on the latest update: 10.5.8
mauronofrio said:
Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus 8 in fastboot-bootloader mode (Power and volume + and volume-);
Connect the OnePlus 8 to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.
DOWNLOAD
All roms on Sourceforge: https://sourceforge.net/projects/fastbootroms/files/OnePlus 8
BRANDED PHONE
For now branded device are not supported
MANUAL FLASH: Windows - OSX - Linux
If you want to manual flash these roms these are the commands (You need the latest sdk platform tools, you can find it here
Is reccomended to format data or the rom cannot boot:
Code:
fastboot -w
Others Commands to flash a fastboot rom
Code:
fastboot flash aop aop.img
fastboot flash bluetooth bluetooth.img
fastboot flash boot boot.img
fastboot flash dsp dsp.img
fastboot flash dtbo dtbo.img
fastboot flash LOGO LOGO.img
fastboot flash modem modem.img
fastboot flash oem_stanvbk oem_stanvbk.img
fastboot flash qupfw qupfw.img
fastboot flash storsec storsec.img
fastboot flash multiimgoem multiimgoem.img
fastboot flash uefisecapp uefisecapp.img
fastboot flash recovery recovery.img
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
fastboot flash opproduct opproduct.img
fastboot reboot fastboot
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash product product.img
fastboot reboot
REMEMBER
"Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
If the device automatically reboot in Stock Recovery mode don't reboot it and wait the flash end.
These ROMs can't be used to update or downgrade your phone but just to restore your phone.
If the rom seems doesn't start go in recovery stock and follow this guideline: English -> Wipe data and cache -> Erase everything.
If you want to rebrand your phone from HydrogenOS to OxygenOS you can follow this guide: Rebrand Guide
If you want you can use also my tool to flash Factory Images, unlock bootloader, flash twrp or to understand if the device is recognized: https://toolaio.tk/
If you got some problems like write error or no partition, check this: https://forum.xda-developers.com/showpost.php?p=76658555&postcount=34
DONATE LINK
If you want to support this and others my projects please consider making a donation, thanks.
Click to expand...
Click to collapse
Hi, do you know if patching with local update a Oxygen OS Europe release from a Global release may cause problems to the fingerprint? I have a IN2010 with the Global OxygenOS but I would like to switch to the European versione becasue I live in Italy like you
Why not flash reserve.img?
nnyd said:
Why not flash reserve.img?
Click to expand...
Click to collapse
Because it is placed in userdata and not in a dedicated partition
I have an issue trying to flash on fastboot. It's says I can't flash on critical partitions. Yes I know alot of people are saying that but what I haven't seen is this:
This is my problem:
Fastboot get device-info
(Bootloader) device unlocked:true
(Bootloader) device critical unlock: false
(Bootloader) charger screen enabled: true
I have already tried "fastboot flashing unlock_critical"
It says bootloader already unlocked. I then re lock bootloader which I know is not a good idea( reflash stock with msm tool) and it lock then I try unlock critical command again and it still says device critical unlock: false
i need help please ..
i tried this method not the latest version i tried the 10.5.4 global
so it gave me all failed and error to foramt and others
then it restart my phone to show me crashdump
what should i do ?
should i use latest version ?
i hope you replay fast .. thank you
Alucardo1 said:
i tried this method not the latest version i tried the 10.5.4 global
so it gave me all failed and error to foramt and others
then it restart my phone to show me crashdump
what should i do ?
should i use latest version ?
i hope you replay fast .. thank you
Click to expand...
Click to collapse
Try again with 10.5.7. When it reboot to recovery, let it continue to run till it reboots on its own.
Unbrick from fastboot method
I hope I can help someone since I spent the whole night trying various methods to unbrick my Oneplus 8 and only this one worked for me JUST FOR INTERNATIONAL VERSION
You must have the drivers installed (Adb & Fastboot)
You must have your phone with the bootloader unlocked
1.- Download the file
2.-Unzip it
inside you will find Flash-all.bat
3.-Enter Fastboot mode
4.-Double click on the Flash-all.bat command
5.-It will direct you to the recovery, select the English language and restart in fastboot mode so that the process continues, wait for it to finish flashing everything and ready, the phone restarts on the latest version
https://mega.nz/folder/8tpUSSrR#7wH4NX_ccr2a6Ub8LXpsEA
Donate Link to support my work
https://paypal.me/pakomorales?locale.x=es_XC
cannot relock bootloader on oneplus 8
bro thanks for fastboot room for oneplus 8,i flash your fastboot room 10.5.9 everthing ok,but i relocked to boot loader it the phone be correpted. what should i do ,
please help me.