Database Users

[Restore to Defaults] ODIN for AT&T i537 (good for a soft brick!)

How to restore to factory MF1 (Warning this is a pre-release version with no way to update MF3 yet. There is no noticiable differences in MF1 to MF3 but you can't get OTA updates. Once a way is found I will update this post)
Thanks to designgears for posting the ODIN, and the anonymous user that provided designgears with it.
1. Download the ODIN flash from here (this is the pre-release MF1 firmware)
2. Extract using the password from the website above
3. Put your device in download mode by rebooting while holding volume down
4. Run ODIN and enjoy

joshuadjohnson22 said:
How to restore to factory MF1 (Warning this is a pre-release version with no way to update MF3 yet. There is no noticiable differences in MF1 to MF3 but you can't get OTA updates. Once a way is found I will update this post)
Thanks to designgears for posting the ODIN, and the anonymous user that provided designgears with it.
1. Download the ODIN flash from here (this is the pre-release MF1 firmware)
2. Extract using the password from the website above
3. Put your device in download mode by rebooting while holding volume down
4. Run ODIN and enjoy
Click to expand...
Click to collapse
I think we should make a MF1 bounty thread or maybe a Poll first to see how many people are stuck on MF1.:fingers-crossed:

dave5777 said:
I think we should make a MF1 bounty thread or maybe a Poll first to see how many people are stuck on MF1.:fingers-crossed:
Click to expand...
Click to collapse
as you wish http://forum.xda-developers.com/showthread.php?t=2406018

hi, dear experts
I need to send back my sgs4 active, I have no idea how to delete everythink. I cannot go into recovery to do wipe. Is it any other opction to do wipe so phone can look like for first time I swich on it?I need to remove all my apps,date
I have got sgs4a GT-I9295
please help

x7nofate said:
hi, dear experts
I need to send back my sgs4 active, I have no idea how to delete everythink. I cannot go into recovery to do wipe. Is it any other opction to do wipe so phone can look like for first time I swich on it?I need to remove all my apps,date
I have got sgs4a GT-I9295
please help
Click to expand...
Click to collapse
Settings>Accounts>Backup & Reset> Factory Data Reset
Sent from my Nexus 7 using Tapatalk 4

Hello. Can help you with that.
This is the stock recovery for the active i9295.
You can flash it with odin.
http://db.tt/krkethQk
After flashing the recovery reboot to it.
Wipe /data factory reset.. From there.
If the problem persists. Than your second option would be to search a stock rom for your active @ sammobile. Can send you the link for the Dutch FW. But for others you need to search them yourself.
Sent from note 2

Echelonblue said:
Hello. Can help you with that.
This is the stock recovery for the active i9295.
You can flash it with odin.
http://db.tt/krkethQk
After flashing the recovery reboot to it.
Wipe /data factory reset.. From there.
If the problem persists. Than your second option would be to search a stock rom for your active @ sammobile. Can send you the link for the Dutch FW. But for others you need to search them yourself.
Sent from note 2
Click to expand...
Click to collapse
Just want to clarify:
No AT&T S4 Active users should attempt this.
ODIN will most likely tell you to screw off but flashing this on the AT&T version(SGH-I537) will cause the recovery partition to fail a signature check.
There seems to be confusion in this forum because the international and AT&T version are merged into one forum. This is okay to flash on the international ones.

joshuadjohnson22 said:
How to restore to factory MF1 (Warning this is a pre-release version with no way to update MF3 yet. There is no noticiable differences in MF1 to MF3 but you can't get OTA updates. Once a way is found I will update this post)
Thanks to designgears for posting the ODIN, and the anonymous user that provided designgears with it.
1. Download the ODIN flash from here (this is the pre-release MF1 firmware)
2. Extract using the password from the website above
3. Put your device in download mode by rebooting while holding volume down
4. Run ODIN and enjoy
Click to expand...
Click to collapse
When I try to extract I keep getting this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
not sure what that means

lances1027 said:
When I try to extract I keep getting this
View attachment 2413043
View attachment 2413044
not sure what that means
Click to expand...
Click to collapse
Maybe a bad download check the md5sum if ok then try winrar instead of 7zip to extract.
Sent from my SAMSUNG-SGH-I537 using Tapatalk

dave5777 said:
Maybe a bad download check the md5sum if ok then try winrar instead of 7zip to extract.
Sent from my SAMSUNG-SGH-I537 using Tapatalk
Click to expand...
Click to collapse
Yep..bad download

thatbigmoose said:
Just want to clarify:
No AT&T S4 Active users should attempt this.
ODIN will most likely tell you to screw off but flashing this on the AT&T version(SGH-I537) will cause the recovery partition to fail a signature check.
There seems to be confusion in this forum because the international and AT&T version are merged into one forum. This is okay to flash on the international ones.
Click to expand...
Click to collapse
I'm confused... The title says for i537 at&t but you say above its not for this version?
Well before I raid this I tried the oneclick an at last step it failed.
I have tried searching everywhere for the single tar file needed for Odin v3.07 an no luck after hrs of searching. I did actually find it in a few forums but was greyed out an replaced saying "this is all u need" well my PC internet connected runs off hotspot an a few minutes ago I used up all my 2.5gb of data for hot spot. So Anyways I'm lost an just bought the s4 active used, hated the tw an wanted Google experience ROM an I ****ed up by doing a factory swipe an can only get into android recovery or Odin on my phone. I did a back up but its not loading it.
Help just spent $250. on this junk box

Cheeva316 said:
I'm confused... The title says for i537 at&t but you say above its not for this version?
Well before I raid this I tried the oneclick an at last step it failed.
I have tried searching everywhere for the single tar file needed for Odin v3.07 an no luck after hrs of searching. I did actually find it in a few forums but was greyed out an replaced saying "this is all u need" well my PC internet connected runs off hotspot an a few minutes ago I used up all my 2.5gb of data for hot spot. So Anyways I'm lost an just bought the s4 active used, hated the tw an wanted Google experience ROM an I ****ed up by doing a factory swipe an can only get into android recovery or Odin on my phone. I did a back up but its not loading it.
Help just spent $250. on this junk box
Click to expand...
Click to collapse
You cannot install custom ROMs on the i537 because the bootloader is locked. You need to be in download mode in order to flash anything with Odin, and if you're looking for i537 firmware, go into the General section and read the i537 Firmware Thread. It sounds like you need to do some more research before you completely brick your phone. Everything you need to know is in this forum, you just need to search.

Devo7v said:
You cannot install custom ROMs on the i537 because the bootloader is locked. You need to be in download mode in order to flash anything with Odin, and if you're looking for i537 firmware, go into the General section and read the i537 Firmware Thread. It sounds like you need to do some more research before you completely brick your phone. Everything you need to know is in this forum, you just need to search.
Click to expand...
Click to collapse
I have been in download mode with Odin one click, tried 3 times an re-read the instructions many times. I will probably just pay someone to fix this for me can't spend much more time on this. (Single father losing his mind)

Cheeva316 said:
I have been in download mode with Odin one click, tried 3 times an re-read the instructions many times. I will probably just pay someone to fix this for me can't spend much more time on this. (Single father losing his mind)
Click to expand...
Click to collapse
You're going to have to start from the beginning and tell us what you're trying to do, what firmware you're currently on, and the steps you tried that failed.

Devo7v said:
You're going to have to start from the beginning and tell us what you're trying to do, what firmware you're currently on, and the steps you tried that failed.
Click to expand...
Click to collapse
Fixed an lies or Odin couldn't do it, had to go to Best buy an a Samsung rep used "smart" program an that did it. I tried all steps covered in different forums. O'well.

I'm trying to salvage my I537 after botching a noob attempt at getting lollipop onto it...
So now I can't boot recovery mode, only download mode. Download mode is the only thing my phone can do (besides the warning if you try to boot normally, saying that you have unauthorized software, go to AT&T store blah blah blah).
As far as I can tell, the method outlined in this thread is my only option, correct? I've followed the steps, and I don't think the Odin oneclick is working properly for me. Once I click "start" the process takes less than 5 seconds and says "all threads completed", and 1 success/0 failures, however my phone does not reset or anything. Just stays at download mode screen (with the blue bar full). I waited a long while just to be sure (nothing happened of course) so I unplugged my phone and restarted it manually. No change from before.
Here is the entire log shown by odin oneclick when it's done:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Any idea why I'm not having any success? Did I just screw up my phone bad enough to have an eternal soft brick? Thanks!

Gristle42 said:
I'm trying to salvage my I537
Click to expand...
Click to collapse
You can't use the file in the OP. You have to use this file: https://www.androidfilehost.com/?fid=23991606952608110
Download to PC and extract using 7zip or WinRAR. Then you have to flash all 4 extracted tar.md5 files simultaneously with Odin

thisisapoorusernamechoice said:
You can't use the file in the OP. You have to use this file:
Download to PC and extract using 7zip or WinRAR. Then you have to flash all 4 extracted tar.md5 files simultaneously with Odin
Click to expand...
Click to collapse
Thank you, this worked like a charm. I'm not sure how I missed this; I searched through the main thread on the i537. I am new to this though.
The OP is highly misleading, and even the following comments don't make this clear.
So since I'm on NE3 now, I'm not stuck the same way people were stuck with MF1, correct? I can get up to lollipop (the right way), if I decide to do so, correct?
Thanks again!

Gristle42 said:
Thank you, this worked like a charm. I'm not sure how I missed this; I searched through the main thread on the i537. I am new to this though.
The OP is highly misleading, and even the following comments don't make this clear.
So since I'm on NE3 now, I'm not stuck the same way people were stuck with MF1, correct? I can get up to lollipop (the right way), if I decide to do so, correct?
Thanks again!
Click to expand...
Click to collapse
If you want to be on lollipop rooted, follow the guide in the following thread, just skip the parts about "download" mode (that was actually meant for another device) it's pretty straightforward: http://forum.xda-developers.com/galaxy-s4-active/general/how-to-update-to-i537oc6-5-0-1-t3089355

I'm new to this forum... I tried using the 1 click Odin method listed above to try and recover my sgh-i537 mf1 but I got an error saying get pit... I tried to copy the log to post it but was unable to right click in the log field... I am completely at a lost as to what I should do to get this phone un-bricked. I've been reading post and trying methods for the last 3 days and I'm beginning to feel hopeless

Rooting s4 i9505 results to "Failed" using Odin 3.07

Rooting s4 i9505 results to "Failed" using Odin 3.07
Now when i turn on phone shows
i9505 firmware upgrade encountered an issue
Need help

I think you are using a wrong version of odin,,try another 1.Regards

SANTUMIL said:
I think you are using a wrong version of odin,,try another 1.Regards
Click to expand...
Click to collapse
I tried with latest version
Odin_3.09.3
not working

celluniversal said:
I tried with latest version
Odin_3.09.3
not working
Click to expand...
Click to collapse
Paste here what error appears.

Joku1981 said:
Paste here what error appears.
Click to expand...
Click to collapse
I did'nt save the screenshot of odin while getting error at the first time
But when i try again now it ask only pit file
ok pls see here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

It was happening while root
Now when i turn on phone shows
i9505 firmware upgrade encountered an issue
SO WITHOUT FIRMWARE FLASHING USING WITH PIT FILE
Anyway to bring back the phone to normal

celluniversal said:
It was happening while root
Now when i turn on phone shows
i9505 firmware upgrade encountered an issue
SO WITHOUT FIRMWARE FLASHING USING WITH PIT FILE
Anyway to bring back the phone to normal
Click to expand...
Click to collapse
You can find the .pit file in this thread -> HERE

Joku1981 said:
You can find the .pit file in this thread -> HERE
Click to expand...
Click to collapse
Dear JOKU
Thank you for u r reply
There are so many attached pit files in that thread,all the pit files are only some kb size
which file i use?
During flash pit files Re-Partition" must be marked.
I have fear to do this because if i anything did wrong, phone may bricked
now phone entering Download Mode,if i did anything cause phone dead,How i do boot repair
I don't have JTAG tool too
So can u please guide me how to do brother

Do you have any custom recovery installed? Like TWRP or PhilzTouch?

Joku1981 said:
Do you have any custom recovery installed? Like TWRP or PhilzTouch?
Click to expand...
Click to collapse
what is custom recovery i don't have idea about this
I just did Rooting result"Failed" using Odin 3.07

Joku1981 said:
Do you have any custom recovery installed? Like TWRP or PhilzTouch?
Click to expand...
Click to collapse
what is custom recovery i don't have idea about this
I just did Rooting result"Failed" using Odin 3.07
Now when i turn on phone shows
i9505 firmware upgrade encountered an issue

waiting for the guide
guys please help

celluniversal said:
waiting for the guide
guys please help
Click to expand...
Click to collapse
278 viewers seen this thread
But i can't get the exact solution

i download the same version flash file
But when try to flash in odin
it ask PIT file
Can you please guide me how to flash the phone and also give the PIT file please

I tried to root my friends s4 but it gave me failed every time in windows 7. I couldnt figure this was happening reinstalling kies did not help.
I also have winodws 8 on same machine installed kies and flashed cfroot using odin everything went fine.
I think you need to try different pc. Give that a try.
Sent from my GT-I9505 using xda premium
---------- Post added at 07:05 PM ---------- Previous post was at 07:00 PM ----------
Oh once using different pc to flash cfroot phone should boot to firmware you were using before.
Sent from my GT-I9505 using xda premium

Can u see a photo your phone error when you turn on...
Sent from my GT-I9500 using XDA Premium 4 mobile app

fleming.patel said:
Can u see a photo your phone error when you turn on...
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
here i upload the error image brother

So I think yoyr your phone is not opening so u need to reflash your phone again with your default firmwar and after that think about root first u need to start your phone...
Sent from my GT-I9500 using XDA Premium 4 mobile app

fleming.patel said:
So I think yoyr your phone is not opening so u need to reflash your phone again with your default firmwar and after that think about root first u need to start your phone...
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes but how to flash i9505 phone?
i download the same version flash file (one single tar file)
But when try to flash in odin
it ask PIT file,(But in my flash file have only one tar file with 2.4 GB,no pit file)
Can you please guide me how to flash the phone and also give the PIT file please
How to check the size of the pit file
I seen in the forum for 16GB version pit file
How to check my phone is 16gp version or not?

Download your default firmware from sammobile and follow this instructions. .. Instructions
Extract (unzip) the firmware file and
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Sent from my GT-I9500 using XDA Premium 4 mobile app

how to put rom on note 3

i am a noob for sure on the note 3 flashing, what is the process to flash my note 3. it is already rooted using towelroot just don't know where to go from there. my phone is on nc4 from ota update, please help

jkill2001 said:
i am a noob for sure on the note 3 flashing, what is the process to flash my note 3. it is already rooted using towelroot just don't know where to go from there. my phone is on nc4 from ota update, please help
Click to expand...
Click to collapse
Download your rom of choice I recommend ( Jasmine Rom 2.0 ) but others might fit you better ...
1. Install towel root
first open it and click on make it rain in about 15 seconds your phone will reboot
2. download root checker from the play store and check to see if you have root access open it ..it will pop up and go ahead and grant permission then it will say congratulations you have root access ....
3. then download supersu from the play store install that(optional) ... Open it and and it will ask something about the binaries click OK and it should install them if not that's OK just close out Reboot:
3. Now Install SafeStrap: follow these how to instructions ...The latest is 3.75
http://forum.xda-developers.com/showthread.php?t=2517610
3a.(YOU MUST INSTALL THE NC2 FIRMWARE IN ODIN AT THIS TIME) unified kk firmware see below pic:
4. After you install safestrap successfully hit reboot to recovery button there in SS..
5. First thing you want to do is create a backup of your Stock Rom...***
6. Then Hit the Back key til you get to the tabs that say install ,wipe etc..hit wipe hit advance wipe check Dalvick, Data, cache, and system then slide.
7.then hit back again to get to the install tab..Now find the rom of choice I recommend dl ing (Jasmine Rom 2.0 awesome rom) or follow this...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
jkill2001 said:
i am a noob for sure on the note 3 flashing, what is the process to flash my note 3. it is already rooted using towelroot just don't know where to go from there. my phone is on nc4 from ota update, please help
Click to expand...
Click to collapse
jkill2001 said:
i am a noob for sure on the note 3 flashing, what is the process to flash my note 3. it is already rooted using towelroot just don't know where to go from there. my phone is on nc4 from ota update, please help
Click to expand...
Click to collapse

biggest problem i have right now is odin won't find my phone. what do i need to download to do that cause my understanding is i need odin to flash to nc2?

jkill2001 said:
biggest problem i have right now is odin won't find my phone. what do i need to download to do that cause my understanding is i need odin to flash to nc2?
Click to expand...
Click to collapse
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
this is what odin is sitting at right now. please HELP

anyone?

jkill2001 said:
anyone?
Click to expand...
Click to collapse
i sure hope i don't brick my phone

jkill2001 said:
i sure hope i don't brick my phone
Click to expand...
Click to collapse
.....

can anyone help before i try this?

jkill2001 said:
can anyone help before i try this?
Click to expand...
Click to collapse
Is your phone in download mode?
1. turn off the phone.
2. press "down" volume key + "home" button + "power" button. When you see some message shows up, hit "up" volume key.

I had the same problem with Odin when I first tried to flash my new modem. First, if you have Samsung Kies installed and are not using it, unistall it and the Samsung USB drivers that came with you phone. Install the latest Samsung USB drivers from the Samsung website and then Odin should see your phone and work like a charm.

Softbricked my Phone

Tried factory reset through safestrap like and idiot and wiped system data and started the phone up with nothing. Now, I get as far as the Samsung with the unlocked padlock and that's it. I've tried Odin back to NB1 but can't seem to find any NC1 Odin files. I was on NC1 Hyperdrive 18.1 i am clueless and about to throw the computer along with the phone out the window. Please tell me what i need to do. Thank you much.!!

Also Knox says it is 0*1 which I think is bad

In download mode it says that

tmac42 said:
Tried factory reset through safestrap like and idiot and wiped system data and started the phone up with nothing. Now, I get as far as the Samsung with the unlocked padlock and that's it. I've tried Odin back to NB1 but can't seem to find any NC1 Odin files. I was on NC1 Hyperdrive 18.1 i am clueless and about to throw the computer along with the phone out the window. Please tell me what i need to do. Thank you much.!!
Click to expand...
Click to collapse
There is no odin file for NC1. You have to odin back to NB1 and then update to NC1. http://forum.xda-developers.com/showpost.php?p=53431153&postcount=1944 has details about the update file.
---------- Post added at 09:58 PM ---------- Previous post was at 09:56 PM ----------
tmac42 said:
Also Knox says it is 0*1 which I think is bad
Click to expand...
Click to collapse
Dont worry much about the knox flag. It could become an issue only if you take your phone for warranty replacement and they check that. Also, knox enabled apps cannot be installed. Otherwise, your phone will function normally.

I've tried to Odin back countless times and it always fails at set partition

jmjoyas said:
There is no odin file for NC1. You have to odin back to NB1 and then update to NC1. http://forum.xda-developers.com/showpost.php?p=53431153&postcount=1944 has details about the update file.
---------- Post added at 09:58 PM ---------- Previous post was at 09:56 PM ----------
Dont worry much about the knox flag. It could become an issue only if you take your phone for warranty replacement and they check that. Also, knox enabled apps cannot be installed. Otherwise, your phone will function normally.
Click to expand...
Click to collapse
I've tried to Odin back countless times. It always stops at "Set Partition" and then fails 5 minutes later.

Do you have re-partition option selected in Odin? If so, unselect and try? The phone is in download mode right?

jmjoyas said:
Do you have re-partition option selected in Odin? If so, unselect and try? The phone is in download mode right?
Click to expand...
Click to collapse
Yes. It's in download mode. And reparation is unchecked. Only thing checked is "auto reboot" and "F. Reset Time"

jmjoyas said:
Do you have re-partition option selected in Odin? If so, unselect and try? The phone is in download mode right?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this is as far as it gets

The picture shows that you have re-partition selected. If it still doesnt work even after unselecting, can you try with Odin 3.09?

jmjoyas said:
The picture shows that you have re-partition selected. If it still doesnt work even after unselecting, can you try with Odin 3.09?
Click to expand...
Click to collapse
Did both of those. You think if I flash the nb1 kernel, it might have a better shot?

I'm honestly losing hope

Change your cable and the USB port it's plugged into between flash attempts. Odin seems to be pretty sensitive about this on "Set PIT File..."
It'll almost always show up in Odin, but sometimes the connection isn't solid enough to actually start the flash.

jdisco1 said:
Change your cable and the USB port it's plugged into between flash attempts. Odin seems to be pretty sensitive about this on "Set PIT File..."
It'll almost always show up in Odin, but sometimes the connection isn't solid enough to actually start the flash.
Click to expand...
Click to collapse
I will try that. What if I take it to Best Buy? You think they could do anything?

tmac42 said:
I will try that. What if I take it to Best Buy? You think they could do anything?
Click to expand...
Click to collapse
Use the nb1 tar and don't check re-partition checked. It'll work
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
Use the nb1 tar and don't check re-partition checked. It'll work
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I've been using the all at nb1 tar

tmac42 said:
I will try that. What if I take it to Best Buy? You think they could do anything?
Click to expand...
Click to collapse
If you're lucky enough to have the guy not notice the "KNOX WARRANTY VOID: 0x1" they'll flash it to stock for you. He will most likely notice because checking that is one of the 1st things they look for.
Doesn't hurt to try if you're out of options though.
I would keep at it if I were you. Switch cables, computers, and 2.0/3.0 USB ports. I'll go through eventually.
Also, see if you can flash just the PDA slot and no PIT

jdisco1 said:
If you're lucky enough to have the guy not notice the "KNOX WARRANTY VOID: 0x1" they'll flash it to stock for you. He will most likely notice because checking that is one of the 1st things they look for.
Doesn't hurt to try if you're out of options though.
I would keep at it if I were you. Switch cables, computers, and 2.0/3.0 USB ports. I'll go through eventually.
Also, see if you can flash just the PDA slot and no PIT
Click to expand...
Click to collapse
No idea what it did. Switched the cable though and the port. So weird that that actually works. Thank you so much everyone!!!

tmac42 said:
No idea what it did. Switched the cable though and the port. So weird that that actually works. Thank you so much everyone!!!
Click to expand...
Click to collapse
Odin is finicky. Changing ports and cable usually works
Sent from my Nexus 5 using XDA Free mobile app

Thanks again both of you!!

Odin error to get the latest update BOC5[N910F]

Hey guys, the problem that I have is that when trying to get by odin version Boc5 either of Switzerland, Luxembourg or any Boc5, I eventually pulled mistake odin, are all from a single file.
Flashes properly until the end of the green bar and is there when it reaches the end where you get the error, now upload a screenshot to see him
Anyone know because it happens ?? and that solution is.
A greeting and thanks.
View attachment 3274626
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

use odin 3.10.6 and try again.

SavanTorian said:
use odin 3.10.6 and try again.
Click to expand...
Click to collapse
Ok I try it and I said, thanks

SavanTorian said:
use odin 3.10.6 and try again.
Click to expand...
Click to collapse
I keep getting the same error, put up some screenshots of error odin and what's on the phone.

try with BOC3 Germany DBT

gwolfu said:
try with BOC3 Germany DGT
Click to expand...
Click to collapse
Sorry I do not understand what you mean, sorry for English

ang3lical said:
Hey guys, the problem that I have is that when trying to get by odin version Boc5 either of Switzerland, Luxembourg or any Boc5, I eventually pulled mistake odin, are all from a single file.
Flashes properly until the end of the green bar and is there when it reaches the end where you get the error, now upload a screenshot to see him
Anyone know because it happens ?? and that solution is.
A greeting and thanks.
View attachment 3274626 View attachment 3274627
Click to expand...
Click to collapse
Nothing serious,when its finish then just flash custom recovery and phone normally boot up.

Ogy77 said:
Nothing serious,when its finish then just flash custom recovery and phone normally boot up.
Click to expand...
Click to collapse
Thanks for responding, at one point I approve, but my question is:
That happens is normal ?? or just happens to me.

ang3lical said:
Sorry I do not understand what you mean, sorry for English
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/download/45145/N910FXXU1BOC3_N910FOXA1BOC3_DBT/

ang3lical said:
Thanks for responding, at one point I approve, but my question is:
That happens is normal ?? or just happens to me.
Click to expand...
Click to collapse
This happens early on kitkat and just via odin flash custom recovery twrp tar file and phone booted up normal.

Ogy77 said:
This happens early on kitkat and just via odin flash custom recovery twrp tar file and phone booted up normal.
Click to expand...
Click to collapse
md5 check hast passed or failed?
it seems, the archive tar.md5 is corrupted or the system/cache/hidden file has a not valid size... (*.img.ext4)
download the package again. and try again.
unpack the zip and flash the tar.md5 again. the md5 check MUST pass through odin .

SavanTorian said:
md5 check hast passed or failed?
it seems, the archive tar.md5 is corrupted or the system/cache/hidden file has a not valid size... (*.img.ext4)
Click to expand...
Click to collapse
Md5 file is ok valid but something wrong with ext4 file becouse you need flash custom recovery and phone will be ok.

try to install this BOC5
_alexndr said:
A small GIFT (especially for KNOX 0x0 users)
>> N910FXXU1BOC5_N910FOXA1BOC3_alexndr.7z << (ultra packed using 7-Zip)
- PC Odin flashable (*.tar.md5 file)
- pure stock, NOT rooted, the only change is replaced multi CSC pack (putted multi CSC OXA package instead of OJK)
- contains CSC: BTU, CPW, DBT, ITV, KOR, XEF, XEO
- can be flashed on ANY N910F without a pit file
- it will NOT trip KNOX if you still have 0x0
Click to expand...
Click to collapse

Thank you all for your help and advice.
But I hope that future updates fix the problem.