Related
Does anyone know how we can get all of the Sony DS980's features to work with our Tilts?
Any ideas?
Anybody?
Thanks,
Dave.
Install the jetware bluetooth extension and it gets a few more functions working but some features such as address book will still not work
Do you have personal experience with this? If so, please list everything that does work for us...
I've been using this for a month or so with the jetware extension installed, it allows you to browse your call history and return calls from there but not the address book.
I think after installing this the only things that don't work are the address book and music track name display.
Just try it out there's a 30 day trial and if it's not for you uninstall it. i don't think all features will work unless we get a new bluetooth stack, maybe windows mobile 6.1 update will do this when it finally comes out.
Does it display the names & numbers of incoming calls?
Do you know how your set-up compares to the Motorola S705 SoundPilot?
it does display the numbers of incoming calls, think the jetware extension needs to be installed for this though, if it's one of your contacts it displays the name like "Home" etc.
I've no experience of Motorola headsets but i would assume they will have the same problem as it seems the Microsoft bluetooth stack is missing the more advanced features so the information is not sent to the headset.
I have one
I just got my new ATT 8925. I am using DS 980. I will test it next week and let you guys know. I am using on my cingular 8125 and it works fine
Review, please!
leeky said:
I just got my new ATT 8925. I am using DS 980. I will test it next week and let you guys know. I am using on my cingular 8125 and it works fine
Click to expand...
Click to collapse
Please do keep us posted, I'm sure I'm not the only one who is curious for a full review!
Music quality
Call quality, both ends
Pairing feasibility
Lanyard for neck-wear included? Detachable?
Sturdy & trust-worthy clip included? Detachable?
& more...
Thanks,
Dave.
awdbeast said:
Please do keep us posted, I'm sure I'm not the only one who is curious for a full review!
Music quality
Call quality, both ends
Pairing feasibility
Lanyard for neck-wear included? Detachable?
Sturdy & trust-worthy clip included? Detachable?
& more...
Thanks,
Dave.
Click to expand...
Click to collapse
The music and call quality are very good, compare to others BT I had tried before, HBH-200, Nokia Hs-12W and others Motorola BT. The only cons I have is, there is no clip-so it will be bouncy around your chest, and the charger head is hard to find (I wish they use a universal mini usb head for charger, so we don't need to bring so many charges). Pairing is easy and more stable, compare to my old cingular 8125. ID display for last 10 incoming/outgoing call on BT. You can't get your whole contact on BT display.
A few questions / care to do a review?
leeky said:
The music and call quality are very good, compare to others BT I had tried before, HBH-200, Nokia Hs-12W and others Motorola BT. The only cons I have is, there is no clip-so it will be bouncy around your chest, and the charger head is hard to find (I wish they use a universal mini usb head for charger, so we don't need to bring so many charges). Pairing is easy and more stable, compare to my old cingular 8125. ID display for last 10 incoming/outgoing call on BT. You can't get your whole contact on BT display.
Click to expand...
Click to collapse
A few questions , if you don't mind:
Does it work with Voice Command?
How well?
How comfortable is the lanyard?
Can it be worn comfortably all day?
Is the lanyard detachable?
Is the lanyard adjustable / can it be shortened?
Does it have any sort of an auto-pairing feature?
Is there much of a delay in pairing?
How fast or slow is it?
How does it do switching to & from incoming calls when you're listening to music?
Is there much of a delay?
How fast or slow is it?
Does it show the contact name &/or # of incoming calls?
Does it show the contact name &/or # of outgoing calls?
How does it do switching to & from incoming calls when you're on a call already?
Is there much of a delay?
How fast or slow is it?
Does it show the contact name &/or # of the incoming call?
Will it let you know if the person that you put on hold hangs up while you're talking to the new caller?
How's the range on it?
Can it pair to multiple Bluetooth devices simultaneously?
Have you tried it?
I want to pair to my laptop & listen to music off of it while I still have the ability to be alerted of incoming calls & to take them as well.
Can it do it?
Have you tried it?
How does it do switching to & from incoming calls when you're listening to music from the laptop (or the other source besides the Tilt / Kaiser)?
Is there much of a delay?
How fast or slow is it?
Does it show the contact name &/or # of incoming calls?
Does it show the contact name &/or # of outgoing calls?
Are the headphones permanently attached or can you replace them with any pair you like?
How do the original headphones sound:
-in general
-bass
Can you initiate calls with it (from your last ten calls list)?
Is there an audible alert for incoming calls:
-when the phone isn't on silent, so it is set to ring / ring & vibrate
-when the phone is set to silent
Have you tried the Jetware extension yet?
How much did you pay for your 980s?
Is that the best deal that you've seen on them?
If not, then where did you see that best price?
Link?
@ Dave/awdbeast ...
HAVE YOU EVER HEARD OF GOOGLE ????
looking at some of your past posts ... many of your questions can be google by yourself by reading the many available reviews out there !!
http://forum.xda-developers.com/search.php?searchid=9567025
why not try and help yourself first ... then come back here for some UNanswered questions ...etc !
awdbeast said:
A few questions , if you don't mind:
How fast or slow is it?
How does it do switching to & from incoming calls when you're listening to music?
Is there much of a delay?
How fast or slow is it?
How fast or slow is it?
How fast or slow is it?
Does it show the contact name &/or # of incoming calls?
Does it show the contact name &/or # of outgoing calls?
Does it show the contact name &/or # of incoming calls?
Does it show the contact name &/or # of outgoing calls?
How does it do switching to & from incoming calls when you're listening to music?
How does it do switching to & from incoming calls when you're listening to music from the laptop (or the other source besides the Tilt / Kaiser)?
......
Click to expand...
Click to collapse
WTF ????
Stop stuttering !!
You're worse then my 5 years old daughter !!! ...
spooki37 said:
I've been using this for a month or so with the jetware extension installed, it allows you to browse your call history and return calls from there but not the address book.
I think after installing this the only things that don't work are the address book and music track name display.
Just try it out there's a 30 day trial and if it's not for you uninstall it. i don't think all features will work unless we get a new bluetooth stack, maybe windows mobile 6.1 update will do this when it finally comes out.
Click to expand...
Click to collapse
Spooki37, even without Jetware extension, I can get caller Id and call history on my DS 980.
Is the microphone on the DS 980 pretty good? It seems to have all the other features I want in a headset.
I bought a Motorola S705 and the microphone on it is horrible, everyone says I can barely be heard or my voice is clipped or runs together and they can't understand me.
Also the motorola will loose bluetooth connection if I get a reminder from PhoneAlarm that I missed a call or have a voicemail. Haven't tried to see if this happens when streaming music and a call comes in.
I just bought this unit. However, after a call comes in when music is playing, the unit disconnects. Is there any way to stop this?
I installed jetware and t seems my problem is fixed
I have a stock Tilt2 from AT&T. MS Voice Command v1.6.21849 came with it, but has a problem. When trying to call a contact, or dial a number, it can't actually initiate the call. it shows the contact briefly, and that's it. If you tell it to show the contact, no problem. But trying to call a contact, or dial a number, won't work. I have both "Contacts" and "Phone" enabled in settings. I have searched the site here for hours & been unable to find anyting. Any help would be greatly appreciated!
Edited to add: The problem only arises when using a bluetooth Headset. Thanks in advance again!
Same Problem
I have noticed the same problem. I did discover if I had the phone in my hand (outside the case or pocket) that it worked. I wonder if the mic input transfers back to the handset after the initial inquiry (i.e first beep, "call contact x" second beep, voice input transfers to handset microphone.)
Mine doesn't care in hand or not. VC is getting the command just fine, it just can't initiate dialing? When BT is NOT connected: Hold the send key, listen for the tone, speak command, verify correct contact, contact briefly shows on screen, phone dials number. When BT IS connected: push the headset button OR hold the send key, listen for the tone, speak command, verify correct contact, contact briefly shows on screen, there's a dull tone and that's the end. So VC is getting the information because it pulls up the right contact. It just can't initiate dialing.
Nakel said:
Mine doesn't care in hand or not. VC is getting the command just fine, it just can't initiate dialing? When BT is NOT connected: Hold the send key, listen for the tone, speak command, verify correct contact, contact briefly shows on screen, phone dials number. When BT IS connected: push the headset button OR hold the send key, listen for the tone, speak command, verify correct contact, contact briefly shows on screen, there's a dull tone and that's the end. So VC is getting the information because it pulls up the right contact. It just can't initiate dialing.
Click to expand...
Click to collapse
Hmm. I just tried it on my stock ROM ATT Tilt 2 and it works ok. However, I need to get the timing just right. If I confirm the contact too soon, nothing happens. If I wait 1-2 seconds before confirming, it works. Stupid Widcom Bluetooth stack.
GermanGuy said:
Hmm. I just tried it on my stock ROM ATT Tilt 2 and it works ok. However, I need to get the timing just right. If I confirm the contact too soon, nothing happens. If I wait 1-2 seconds before confirming, it works. Stupid Widcom Bluetooth stack.
Click to expand...
Click to collapse
That works for me too. Thanks! Weird though, works only if I initiate the call from the headset. If I initiate the voice dialing from the send key, while a BT headset is attached, still doesn't work...
Incoming caller announce
Does incoming call ounce work for you on the tilt 2? My announces over the speaker phone regardless of my settings.
GermanGuy said:
Hmm. I just tried it on my stock ROM ATT Tilt 2 and it works ok. However, I need to get the timing just right. If I confirm the contact too soon, nothing happens. If I wait 1-2 seconds before confirming, it works. Stupid Widcom Bluetooth stack.
Click to expand...
Click to collapse
thanks for the tip. i was ready to give up on vc. waiting is such a simple solution. appreciate the help.
GermanGuy said:
Hmm. I just tried it on my stock ROM ATT Tilt 2 and it works ok. However, I need to get the timing just right. If I confirm the contact too soon, nothing happens. If I wait 1-2 seconds before confirming, it works. Stupid Widcom Bluetooth stack.
Click to expand...
Click to collapse
That worked for may also, thank you.
Annouce works on held call
Hey guys,
I noticed today while i was on a call, another call came in and the voice command announced the call in my bt as it was suppose to.
I guess this goes back to the timing issue that was discussed on another thread about microsoft needing to update the vc software to work with these new BT stacks.
Anybody had any luck or can post bt headsets that actually work.
I upgraded from a Fuze which worked great with my headset not i have nothing working with the tilt 2
Please advise
andersondb1 said:
Hey guys,
I noticed today while i was on a call, another call came in and the voice command announced the call in my bt as it was suppose to.
I guess this goes back to the timing issue that was discussed on another thread about microsoft needing to update the vc software to work with these new BT stacks.
Anybody had any luck or can post bt headsets that actually work.
I upgraded from a Fuze which worked great with my headset not i have nothing working with the tilt 2
Please advise
Click to expand...
Click to collapse
I have a Blue Ant Q1 that works very good with the tilt 2 & VC. It will read my text, e-mails, & in-coming calls all over the BT. Sometimes the messages & e-mails will flop back & forth over blue tooth & speakerphone. Plus, I can listen to my music on the Q1 as well.
I have the BlueAnt Q1 headset also and contrary to what was said eariler it does not announce incoming through the Tilt 2 Voice Commander software. This headset has its on software the will announce incoming phone number only but is not able to link that number to a name in your contacts.
Its a very neat headset as everything is done by voice commands. But like all the other headsets talked here it will announce everything else (Emails, appointments, test messages, etc) but incoming caller information through VC.
you ever get the feeling the left hand (microsoft)doesn't know what the right hand (bluetooth manufacturers) is doing?
The awkward voice command delay
GermanGuy said:
Hmm. I just tried it on my stock ROM ATT Tilt 2 and it works ok. However, I need to get the timing just right. If I confirm the contact too soon, nothing happens. If I wait 1-2 seconds before confirming, it works. Stupid Widcom Bluetooth stack.
Click to expand...
Click to collapse
I agree completely. On my original tilt, you said "yes" right after the voice command confirmation prompt. With the Tilt 2 I need to wait about an awkward pause longer otherwise I get a call disconnected beep in the handset and the call does not go through. If anyone finds a registry value or other fix for this, I'd be greatly appreciative!
The text message announcements DO NOT WORK, but the email announcements DO! what's up with that?! can anyone explain this one to me? i even tried adding registry edits with no luck. i've tried several ideas and nothing seems to work. i believe there is a way to get it to work, as it does announce the emails as they come in, but i can't figure it out.
These issues are all because of the new Bluetooth Stack in Windows Mobile 6.5. MSVC is old and written for the old MS BT Stack. It will not be updated, so unfortunately what you get is what you get.
I have the same problem; incoming calls are announced just fine but text messages are not read to me as with my WinMo 6.1 Tilt. I really wish there was a fix for this!
I have tried to get Microsoft VoiceCommand to announce incoming calls through bluetooth but have had no success. I will be happy to pay anyone 100.00 who can come up with a solution. Will pay by paypal once confirmed working.
You can keep your money, but I can try to help. Did you already go into the Voice Command settings and select "announce notifications using bluetooth hands free only" or there is another option that says"announce notifications using bluetooth hands free if available"
BT headset sencitivity to Voice Command
I've found over the years that the reading incoming voicemail via Voice command can often depend on the BT headset you have. I went thru several different models until I found a family that seems to work very well. At the moment I have a TMOUS Hd2 and I'm using a Motorola 710 bt headset. It works just about every time.
Previously I had a HTC TYTN II with a Motorola 700 and then the 710 and these both worked with the purchased copy of Voice command 1.6 (don't recall the release but it was pretty current via upload)
Try going to a store that carries the 710 that offers a return policy, give it a try.
Tried these suggestions no luck
MirasHD2 I tried the settings for both announcing incoming calls and unchecked only during free time.
AndyClay I have a Motorola 710 headset no good. My problem is with incoming caller ID announce. I have tired a Jabra, Motorola 710 and Jawbone Prime all with no luck. Can get them to announce messages but no caller ID through bluetooth.
Thank you both for your suggestions.
You mean on BT "Call from 999-999-9999"? Yeah, if you find a answer let me know. Anything that initiates from the phone won't goto the headset. But anything I tell it from the headset will come back to the headset.
So incoming calls and appointment notifications won't work on my headset. But everything else seems to work.
I have the Blue Ant Q1 and it announces the incoming caller's phone number and handles voice commands very well. I just can't seem to get ringtones to play through the headset. NOTE: Blue Ant has a newer model coming called T1 that is supposed to announce calls by name. But I cannot confirm this.
The Q1 does it for me so far but I REALLY would like to have ringtones/ringerIDs to play through the headset.......
I have a motorola T505 in car speaker and it works great, plus I can also listen to slacker through my car sterio with this unit. New Egg sells them for about $60
It will announce appointments
Starstreak, I have got it to announce my appointments. This is what I did. Enable the settings in the VoiceCommand app to announce appointments and uncheck only during free time. Then go to settings, on the bottom of the device it will say menu, click on menu then all settings this opens several selection icons. select bluetooth go into settings which is the gears on the top left, choose advanced then audio, check box to play system sounds on remote handsfree device. I have my device set to announce appointments 15 minutes before the time. when this happens a tone alert starts, this opens the audio channel to my bluetooth headset, I hear a little of the tone then I hear the voice announcement telling me what the appointment is. Doing this will also send system sounds to the headset but I don't mind that too much.
It palys music
Jdwme, I can play music through the headset also. It is caller ID announce I can't get working. Does your Motorola announce the incoming callers name or number. None of the devices I have tried will announce caller ID at all only through the phone speaker no bluetooth.
guardm said:
I have the Blue Ant Q1 and it announces the incoming caller's phone number and handles voice commands very well. I just can't seem to get ringtones to play through the headset. NOTE: Blue Ant has a newer model coming called T1 that is supposed to announce calls by name.
Click to expand...
Click to collapse
If youre willing to try another headset
waiting for the new Blueant
I looked up the Blueant and I am waiting for the new model which will announce the name of the caller. I was hoping someone would know of or figure out a registry hack or mod to get this to work on a regular bluetooth headset. Thanks for the tip on the Blueant
polera257 said:
I looked up the Blueant and I am waiting for the new model which will announce the name of the caller. I was hoping someone would know of or figure out a registry hack or mod to get this to work on a regular bluetooth headset. Thanks for the tip on the Blueant
Click to expand...
Click to collapse
No problem Polera. According to Blue Ant, the T1 is due out in May 2010 and should be $79-$99. I will probably get one too.
I thought I tried that one... I'll try that again.
polera257 said:
Starstreak, I have got it to announce my appointments. This is what I did. Enable the settings in the VoiceCommand app to announce appointments and uncheck only during free time. Then go to settings, on the bottom of the device it will say menu, click on menu then all settings this opens several selection icons. select bluetooth go into settings which is the gears on the top left, choose advanced then audio, check box to play system sounds on remote handsfree device. I have my device set to announce appointments 15 minutes before the time. when this happens a tone alert starts, this opens the audio channel to my bluetooth headset, I hear a little of the tone then I hear the voice announcement telling me what the appointment is. Doing this will also send system sounds to the headset but I don't mind that too much.
Click to expand...
Click to collapse
It's not the HD2, It's a bug with MSVC when being used with WM versions past 6.1. I too have been looking for a fix for several days. I also had the Treo Pro where the Announce Incoming Caller worked with the same BT that I am using now.
I supposed now that MS is on to WM7, they could care less if they fix this or not.
That's why I posted here
MadLinx, That is why I posted the offer for someone here to maybe look into a registry hack or modification to get the caller Id over bluetooth working.. I have managed to get all the other voice functions operating.....still hoping someone here can help.
mine works just fine, i'm using a moto h710 and plantronics 975. go to bluetooth settings, advanced, audio, and make sure "play system sounds on remote hands-free device is checked. then go to voice command, make sure it's enabled. then highlight phone, hit options. check all the boxes, including announce incoming calls and select annouce notifications using bluetooth if available. if you guys need more help, just holler .
Ok checked the box to move all audio to headset. Well, now I seem to get mostly everything but stuff that the unit initiates(sp) itself. Like the incoming caller ID/name if it's my address book. But so far it works the best.
MS should just pay someone to FIX this program. Hell, if it worked like how it's supposed to, I'll pay$29.95 for an app like this.
mr8820 said:
mine works just fine, i'm using a moto h710 and plantronics 975. go to bluetooth settings, advanced, audio, and make sure "play system sounds on remote hands-free device is checked. then go to voice command, make sure it's enabled. then highlight phone, hit options. check all the boxes, including announce incoming calls and select annouce notifications using bluetooth if available. if you guys need more help, just holler .
Click to expand...
Click to collapse
thanks for the suggestion, but it didn't change anything on my end. the announce works, but it still announces through the phone loud speaker.
Yesterday, I upgraded from a Dash (non-3G) to the HD2. On my Dash, I had performed the registry hack to enable the voice command messaging/caller ID announcements over the handsfree bluetooth, and had no problems. Now using the same Plantronics Voyager Pro headset with the HD2, I am receiving calendar and messaging notifications, but I too am not getting the caller ID announcements on the headset. The incoming call information that should be heard on the headset is played through the handset speaker which should be muted. However, I have no problem placing calls using the headset with voice command. So, if a problem exists with the bluetooth stack, I am not sure why it would work sometimes and other times not. I too have verified all of the settings mentioned in this thread to remedy the situation with no success. I have factory reset the HD2 and reconfigured everything, again without success. I am not sure where to go next.
http://pocketnow.com/how-to/how-to-disable-htc-messaging-on-the-hd2
Can someone try this? He claims "One of the great things about HTC Sense on the HTC HD2 is that it's such a heavy redesign of Windows Mobile. Unfortunately, this can cause problems with some other applications. For me, HTC's text messaging application replacement disabled Microsoft Voice Command's ability to read my incoming text messages to me over a Bluetooth headset."
So I'm wondering if doing what he claims will allow the caller ID to be sent to BT? I would try this, but can't at the moment.
anyone aware of this bluetooth error. When you have a bluetooth connected to the phone, your text messages, phone calls etc. dont come through the ear piece only the phone. There is no kind of voice activation what so ever through bluetooth.
I also tried Vingo & this was a fail.
djkris808 said:
anyone aware of this bluetooth error. When you have a bluetooth connected to the phone, your text messages, phone calls etc. dont come through the ear piece only the phone. There is no kind of voice activation what so ever through bluetooth.
I also tried Vingo & this was a fail.
Click to expand...
Click to collapse
Yes I also have serious bleutooth issues with 2.2,1. See my post here:
http://forum.xda-developers.com/showthread.php?p=10272042&highlight=bleutooth#post10272042
Seems that there are not a lot of people having the same issues
This is what I am trying to do.
When I am driving I usually have my phone in my briefcase or center console so it is very easy to miss the alert tones of the SIII.
On my Windows Mobile 7.5 phone (Focus) I would get a voice alert on my bluetooth headset telling me that I have received a text message from ____ and if it should read it.
Does the SIII have similar feature? I will settle on getting some sort of tone alert on my BT Headset so I will know to get to my phone and retrieve my message......something!
I have tried using the driving mode where it will read out all alerts but it only works through the phones speaker even though my bluetooth headset is turned on and connected.
Ideas anyone?
Thanks
Some capable Motorola bluetooth headsets can have that feature w/ a motorola app. I have the Motorola Elite Flip and have the app set to turn on when bluetooth is turned on. I can receive and send text without looking at my phone. And of course same with phone calls.
There are also some 3rd party apps that can do this with any bluetooth i believe. I use to use Vlingo a lot.
Sent from My Epic Ice Cream Sandwich With Sprinkles!!!
Speedin07si said:
Some capable Motorola bluetooth headsets can have that feature w/ a motorola app. I have the Motorola Elite Flip and have the app set to turn on when bluetooth is turned on. I can receive and send text without looking at my phone. And of course same with phone calls.
There are also some 3rd party apps that can do this with any bluetooth i believe. I use to use Vlingo a lot.
Sent from My Epic Ice Cream Sandwich With Sprinkles!!!
Click to expand...
Click to collapse
Thanks for your reply!
I checked out the My Motospeak app and it looks like a very cool app but since I already have way too many BT headsets, I will wait and see is I can do what I want with what I already have.
Since my initial post, I spent some time playing around with my phone and came up with a potential solution using my Jawbone Icon headset and the Samsung S-Voice app/
What I found was that if I will connect my Jawbone Icon to the phone audio ( a2dp) and then turn on the driving mode, all the phone audio output including TTS outputs are send to the Jawbone headset.
The only thing is that I have to remember to turn off the driving mode when I'm not using my BT headset or else all the TTS outputs will come out through the phone's speaker. I wish there is an option to have the driving mode turn off automatically when I disconnect my BT headset or at least restrict it to sending out text messaging TTS only to headsets. I will see if I can live with that limitation.
Thanks again for taking the time to response to my question. :good:
Have a good weekend!
spanky310 said:
Thanks for your reply!
I checked out the My Motospeak app and it looks like a very cool app but since I already have way too many BT headsets, I will wait and see is I can do what I want with what I already have.
Since my initial post, I spent some time playing around with my phone and came up with a potential solution using my Jawbone Icon headset and the Samsung S-Voice app/
What I found was that if I will connect my Jawbone Icon to the phone audio ( a2dp) and then turn on the driving mode, all the phone audio output including TTS outputs are send to the Jawbone headset.
The only thing is that I have to remember to turn off the driving mode when I'm not using my BT headset or else all the TTS outputs will come out through the phone's speaker. I wish there is an option to have the driving mode turn off automatically when I disconnect my BT headset or at least restrict it to sending out text messaging TTS only to headsets. I will see if I can live with that limitation.
Thanks again for taking the time to response to my question. :good:
Have a good weekend!
Click to expand...
Click to collapse
Np. I'm still rockin the OG Epic 4G (sg1). Waiting till aug for my upgrade. So idk anything about the systems guts in the gs3. But i like you need to be completely hands free when driving. So i feel your pain. GL with getting something to work.
Sent from My Epic Ice Cream Sandwich With Sprinkles!!!
spanky310 said:
Thanks for your reply!
I checked out the My Motospeak app and it looks like a very cool app but since I already have way too many BT headsets, I will wait and see is I can do what I want with what I already have.
Since my initial post, I spent some time playing around with my phone and came up with a potential solution using my Jawbone Icon headset and the Samsung S-Voice app/
What I found was that if I will connect my Jawbone Icon to the phone audio ( a2dp) and then turn on the driving mode, all the phone audio output including TTS outputs are send to the Jawbone headset.
The only thing is that I have to remember to turn off the driving mode when I'm not using my BT headset or else all the TTS outputs will come out through the phone's speaker. I wish there is an option to have the driving mode turn off automatically when I disconnect my BT headset or at least restrict it to sending out text messaging TTS only to headsets. I will see if I can live with that limitation.
Thanks again for taking the time to response to my question. :good:
Have a good weekend!
Click to expand...
Click to collapse
I see though find driving mode, but have you tried a app called tasker? You can find it in the play store. It is a paid app but you can set it so when you connect Bluetooth to automatically start driving mode.
Sent from my SPH-L710...if some one helps you press the thanks button