Someone has found the solution to fix low in-call volume directly in AudioRouter sources of android. Is doing exactly what I was doing in my app, but is doing this in telephony source triggered by muteChange, so no need for an external workaround app.
I am glad to have this bug fixed by source and I am glad I had a contribution to this.
For those who used my app for low in-call bug fix: WHEN the ROM that you use will get an update to a low in-call volume bug fixed by source, please disable low-incall fix in CMUtility.
Here is the fix in sources: https://github.com/TeamCanjica/andr...mmit/fdf281fdabe5e7517eb96f2faf159bbcc74ae4a6
Because I love CM based ROM's I have created this app for some fixes/utilities.
So.
1. LOW IN-CALL VOLUME with effect when switching to/from speakerphone)
I know that when answer the call you can press VOL- then VOL+ to increase that low volume. But is not simple to do this at every call start. So I've made an app to do this automatically for you.
ATENTION!
- You don't see an icon for this app in your launcher app drawer. This is a service that start at boot and do his work without interacting any way with you.
- This app don't help you with WIFI bug and don't switch you automatically on 2G/3G when you need. If you need this features please install only CMUtility application (down at 3)
- INSTALLATION: Is recomended to copy this app in /system/app and set permissions rw-r--r-- then reboot.
I did this for the many who have asked
[/COLOR]
You can find this app in attach as onlyincallfix.apk.
2. ALL in ONE - CMUtility
We have a new application for all my fixes/utilities !
This app have 3 configurable functions for now:
a. In-Call low volume fix done even when switch to/from speakerphone! When answering a call or switch to/from speakerphone this service will automatically change in-call volume to MIN and back to MAX with 100ms delay.
So no more in-call volume bug on CM based ROM's!
For those who used my app for low in-call bug fix: WHEN the ROM that you use will get an update to a low in-call volume bug fixed by source, please disable low-incall fix in it.
b. WIFI start fail fix by connecting/disconnecting only with a single notification touch. In this mode WIFI never turn OFF and never fail start!
So no more WIFI start bug on CM based ROM's!
c. Automatically switch to 2G/3G only when needed.
You can configure that this service automatically switch network mode to 3G only or 3G preferred when data switched ON, and go to 2G when data is switched OFF or WIFI is connected (20 seconds delay). This is for battery economy.
So you never drain your battery using 3G if you don't need. I take care of this.
Features are configurable if you open this app form app drawer. Notification click will only connect/disconnect wifi network.
IMPORTANT! If you have installed onlyincallfix.apk please uninstall it! Just because that application is part of CMUtility job. You don't need two applications with same function. Or disable In-call Fix from CMUtility accessing it from app drawer.
You can find this app in attach.
CMUtility ScreenShot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CMUtility ChangeLog:
2014.03.12 - Initial Release (v1.0)2014.03.13 - v1.0.1
- FC at BOOT fixed
- Added configurable icons for notification2014.03.14 - v1.0.2
- Added no icon option for notification2014.03.17 - v1.0.3
- Solved boot start FC when is pushed as system app2014.03.18 - v1.0.4
- Added option to run without persistent notification
- Changed toggles captions2014.03.19 - v1.0.5
- I've found an FC when saving options if InCall fix is disabled. FIXED
reserved
reserved
2. I leave the WiFi connected all night. It doesn't eat even 1%of my battery overnight
I experience too much battery drain on mokee 4.4
It drains up to 40percent with half hour use of WiFi..
Sent from my GT-I9070 using Tapatalk
RajatRJ said:
I experience too much battery drain on mokee 4.4
It drains up to 40percent with half hour use of WiFi..
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
Using my WiFi fix app? Battery drain is not from my app. This app do nothing else than executing connect/disconnect commands. This battery drain when using WiFi is normal on CM roms. I don't understand why. We hope the devs will do something for this.
Sent from my GT-I9070 using XDA Premium 4 mobile app
RajatRJ said:
I experience too much battery drain on mokee 4.4
It drains up to 40percent with half hour use of WiFi..
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
On MoKee 4.4 I do not have WIFI bug at all. Using it for 3 weeks, I never had a problem with turning WIFI on. On LQL.
And if your question is about battery drain, this is not a place for it. Use MoKee discussion thread.
You could open the thread to development section.It's your job and it includes fixes so everyone can see them am I wrong ?
King ov Hell said:
You could open the thread to development section.It's your job and it includes fixes so everyone can see them am I wrong ?
Click to expand...
Click to collapse
I think you don't, but I will not open another. Only if moderators will move this...
Thanks for volume app. I'm waiting for a rom fix for wifi. (CarbonKitkat)
Do I have to run VolumeTweak at every reboot???
NEW Application
New app released! See OP for details.
Please test and report! Thanks
elementbt said:
Thanks for volume app. I'm waiting for a rom fix for wifi. (CarbonKitkat)
Do I have to run VolumeTweak at every reboot???
Click to expand...
Click to collapse
No you don't need. Is auto running. But I strongly recommend you to install ALL in ONE app from OP. Is working for speakerphone too!
Great tool! Excellent idea for 3g auto off...
---------- Post added at 06:49 PM ---------- Previous post was at 06:25 PM ----------
Wait! I have 2 icons in statusbar now, the old one wifi abd the yellow one cm utility. Both working the same... !?!
jazzh said:
Great tool! Excellent idea for 3g auto off...
---------- Post added at 06:49 PM ---------- Previous post was at 06:25 PM ----------
Wait! I have 2 icons in statusbar now, the old one wifi abd the yellow one cm utility. Both working the same... !?!
Click to expand...
Click to collapse
Uninstall old application. You don't need it anymore. Use only last app (3).
Sent from my GT-I9070 using XDA Premium 4 mobile app
Ok, I uninstalled both old apps.
Could you add some more icons in white, cause yours is the only one yellow now
jazzh said:
Ok, I uninstalled both old apps.
Could you add some more icons in white, cause yours is the only one yellow now
Click to expand...
Click to collapse
Ok. I will
Sent from my GT-I9070 using XDA Premium 4 mobile app
jazzh said:
Ok, I uninstalled both old apps.
Could you add some more icons in white, cause yours is the only one yellow now
Click to expand...
Click to collapse
ALL in ONE app updated to v1.0.1
Details & download in OP
@jazzh you have white icon.
URGENT
Those who have downloaded ALLinONE v1.0.1 today please download the file again and install over! I forgot something and I corrected & uploaded now the file with same name.
I apologize.
Bro,
Make some screenshots and put them in the OP. More profi IMHO.
PS: Good work, btw.
Ver 1.1 is great! White ixon is good, thx...
BMARo said:
No you don't need. Is auto running. But I strongly recommend you to install ALL in ONE app from OP. Is working for speakerphone too!
Click to expand...
Click to collapse
Bro, I have a question! If I have just installed the fix for the volume would it be the same as if I have installed the application for everything else? I mean, Does the same function with the same speed of response (100ms)?
Sorry for my horrible English! T_T
Atte Arael_x
Related
ONLY FOR PHONES RUNNING GINGERBREAD (Android 2.3) OR HIGHER!!!
After 2 weeks of solid coding (and not much sleep) the Beta is finally ready!
Thank you to everyone on my twitter who has tested the incomplete version already!
For those of you who have no idea what this application does, let me summarise:
Volume+ allows you to manually alter the 5 EQ bands in Android and also allows you to increase the volume multiplier to a maximum of 20 (it can go higher, but I've limited it to 20 for obvious reasons). I've included several EQ pre-sets too.
In this latest version, I've added the option to save your custom EQ settings and load them again. This was the single most requested feature (and the most time consuming to code!). These options are available for the phone's main loudspeaker, the wired headset and your A2DP bluetooth headset.
Anyway, I hope you guys like it, and please post any bugs you find!
Cheers.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Volume+ V1.9.0.1
- Changed the package name, so hopefully you wont get any more irritating update messages from the Android Market (You'll have to uninstall any previous versions prior to installing this one)
- Re-added the old drop down volume options, it seems to go louder this way for some reason
- Other behind the scenes changes
Volume+ V1.9 Beta (RB4) updated 6:43 (BST). Fixed force close bug.
- Seekbars modified further to look and function better.
- Massive size reduction (151kb to 75kb).
Volume+ V1.9 Beta (RB3)
- Seekbars (sliders) altered to work better on devices with small/large screens (Still not perfect, will be worked on more).
- [BUGFIX] When you open the app, the 'EQ Presets' list would not load as disabled if the "Use Custom" checkbox was ticked. This has been fixed.
- Size reduced (will be reduced further before release).
Volume+ V1.9 Beta (RB2)
- Some slight code modifications
- Removal of A LOT of crap
- All debug messages removed (wont spam your logcat now)
- Check added so you can only open headset/bluetooth settings when headset is plugged in or bluetooth device is connected.
- UI Overhaul
* Settings completely changed
* Sliders automatically adjust to show pre-sets
* Volume/BassBoost/Echo now controlled exclusively by the sliders
* Tick the 'Custom EQ Settings' to enable the sliders
- the ability to Save/Load/Delete custom settings added
- Method of altering volume modified
- Various behind-the-scenes changes
It should be fairly self explanetory, but don't hesitate to get in contact with me on here, via e-mail ([email protected]) or on Twitter.
Thanks and Enjoy!
Meltus
1.9.0.1 Download Link
http://dl.dropbox.com/u/56466503/Builds/VolumePlusv1.9.0.1-FREE.apk
Nice! Installing now. Will report back. Thanks!
Works great, and the presets take the guess work out of it. Definitely sounds a lot different on my Gnex.
Edit: Sounds great through the speaker and all settings work. However, while using headphones there are no changes what so ever. I tried different settings but they all sound the same.
I did notice a difference with headphones but I also got a small hiss. Even with all of the settings turned to 0. Just having the mod enabled gave me a little hiss while playing podcasts with PocketCasts. Couldn't really notice the hiss with Google Music but I'll have to play around more.
Could just be the ROM or the kernel though. I'm gonna keep playing around to see what's up. Love the app though. I don't understand why there aren't more good EQ apps out there. DSP is hit and miss and this is the only other real other one that's any good.
Will be able to test bluetooth later on today, hopefully.
When loading it up on my GNex (Verizon) I noticed there was a message about the bass boost and EQ not working yet on ICS. With the 1.8.1 release, I noticed that if I just changed the EQ and BB settings while the music was playing, that the changes would be there but once the music was stopped, it seemed I would have to reset the settings again to get the changes. This doesn't seem to be the case now though, changing the settings doesn't seem to get them to show up at all on 1.9. If there's something I can do to help, let me know. I'm running AOKP b27 and faux kernel 13m as reference.
Shay D. Life said:
Works great, and the presets take the guess work out of it. Definitely sounds a lot different on my Gnex.
Edit: Sounds great through the speaker and all settings work. However, while using headphones there are no changes what so ever. I tried different settings but they all sound the same.
Click to expand...
Click to collapse
Thanks for the feedback!
I'll flash the ROM you're using and see if I can replicate it.
Thanks for your hard work Meltus.
I'm running fine with your Volume+ 1.8 but I'm trying the beta now.
Will feed back tomorrow.
Shay D. Life said:
Works great, and the presets take the guess work out of it. Definitely sounds a lot different on my Gnex.
Edit: Sounds great through the speaker and all settings work. However, while using headphones there are no changes what so ever. I tried different settings but they all sound the same.
Click to expand...
Click to collapse
Just flashed the ROM you're using and the headset settings seem to be working fine for me. Are you using PowerAMP or something similar to play music? Any music player that has it's own built in EQ will override my app.
FYI, on AOKP27, Toro GNex, Bluetooth works great too! Haven't noticed any issues yet. Thanks again!
very nice application and worth a download and usage but same with headphones, not much difference felt.
Speaker and Handset work flawlessly. BTW I don't have a bluetooth handset to test this feature.
Thanks
Thanks for the feedback everyone!
It's much appreciated!
I tested the bluetooth speaker section with my Jambox last night. Sounds great.
Sent from my Galaxy Nexus using xda premium
Shay D. Life said:
I tested the bluetooth speaker section with my Jambox last night. Sounds great.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Cool, glad Bluetooth is working, that's the one thing I haven't been able to test myself ><
Thanks!
@ OP
Is this a HW EQ? Or a SW EQ?
Hope it can replace or compete with voodoo and DSP...
Will try this later.
Accidentally sent from my Google Nexus S using XDA Premium
Meltus said:
ONLY FOR PHONES RUNNING GINGERBREAD (Android 2.3) OR HIGHER!!!
After 2 weeks of solid coding (and not much sleep) the Beta is finally ready!
Thank you to everyone on my twitter who has tested the incomplete version already!
For those of you who have no idea what this application does, let me summarise:
Volume+ allows you to manually alter the 5 EQ bands in Android and also allows you to increase the volume multiplier to a maximum of 20 (it can go higher, but I've limited it to 20 for obvious reasons). I've included several EQ pre-sets too.
In this latest version, I've added the option to save your custom EQ settings and load them again. This was the single most requested feature (and the most time consuming to code!). These options are available for the phone's main loudspeaker, the wired headset and your A2DP bluetooth headset.
Anyway, I hope you guys like it, and please post any bugs you find!
Cheers.
Volume+ V1.9 Beta
- Some slight code modifications
- Removal of A LOT of crap
- All debug messages removed (wont spam your logcat now)
- Check added so you can only open headset/bluetooth settings when headset is plugged in or bluetooth device is connected.
- UI Overhaul
* Settings completely changed
* Sliders automatically adjust to show pre-sets
* Volume/BassBoost/Echo now controlled exclusively by the sliders
* Tick the 'Custom EQ Settings' to enable the sliders
- the ability to Save/Load/Delete custom settings added
- Method of altering volume modified
- Various behind-the-scenes changes
It should be fairly self explanetory, but don't hesitate to get in contact with me on here, via e-mail ([email protected]) or on Twitter.
Thanks and Enjoy!
Meltus
Click to expand...
Click to collapse
Tested on my HTC salsa. I am having some graphically problem. Please refer attachments.
Sent from my HTC Salsa C510e using XDA
MBariya said:
Tested on my HTC salsa. I am having some graphically problem. Please refer attachments.
Sent from my HTC Salsa C510e using XDA
Click to expand...
Click to collapse
Yeah, I'm aware of the graphical issues on smaller devices, does it look OK in landscape and does it actually function OK?
I need to make a better seekbar preference!
Sent from my Galaxy Nexus using xda premium
thanks billions!!!!!!
Meltus said:
Yeah, I'm aware of the graphical issues on smaller devices, does it look OK in landscape and does it actually function OK?
I need to make a better seekbar preference!
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
new modification to screen size for our small devices (aria for me) works alot better. awesome app man, thanks a ton!!!
benbailey84 said:
new modification to screen size for our small devices (aria for me) works alot better. awesome app man, thanks a ton!!!
Click to expand...
Click to collapse
No problem, glad it's working better for you!
CSC UNKNOWN?
COPY not MOVE the files from system/csc/BTU/system/csc TO system/csc then reboot.
10TH LEAK XXDLI4
http://forum.xda-developers.com/showpost.php?p=31892837&postcount=217
9TH LEAK XXDLI3
http://forum.xda-developers.com/showpost.php?p=31651394&postcount=215
8TH LEAK XXDLI2
http://forum.xda-developers.com/showpost.php?p=31582718&postcount=214
7TH LEAK XXDLI1
http://forum.xda-developers.com/showpost.php?p=31131029&postcount=205
6TH LEAK XXDLH9
http://forum.xda-developers.com/showpost.php?p=31026070&postcount=182
5th Leak XXDLH8
http://forum.xda-developers.com/showpost.php?p=30815693&postcount=164
4th Leak XXDLH7
http://forum.xda-developers.com/showpost.php?p=30653822&postcount=144
3rd Leak XXDLH6
http://forum.xda-developers.com/showpost.php?p=30507651&postcount=120
Changes:
- audio recording in video has definitely improved.
- recording video, we can now pause recording and then resume.
- homescreen > phone > menu > in-call equalizer now renamed to my call
- developer options > animator duration scale.
- settings > wifi > advanced > wifi timer
- delete many files in default file browser now shows windows with progress bar and remaining files to be deleted instead of just circle icon rotating in previous rom.
- haven't used browser that much so hope someone could confirm, menu > downloads and menu > settings > bandwidth management
- connects to wifi faster now.
- turning on bluetooth, shows you a window for available bluetooth devices. bluetooth confirmed working both send/receive.
- settings > battery > click on graph to show history details > now includes gps alongside mobile network signal, wifi, awake,screen on and charging.
- compose message using voice, no need for internet.
http://forum.xda-developers.com/showpost.php?p=30463072&postcount=92
noticed when using voltage control:
- back then i only see 200mhz,400,800 and 1.4ghz always utilized. now i can see 400mhz,700 and 1.1ghz,1.2,1.3 being utilized as well. i haven't seen this happen in previous roms from long hours of use and gaming. oh btw, governor used is still pegasusq,i/o is cfq, min 200mhz max 1.4ghz
- pop-up player now resizable. clicking on it will now just pause the video and not return to full screen like it did.
- thanks trc
- CELL STANDY REPORTING BUG FINALLY FIXED. thanks bala high roller baby baby bay
minor bug:
- settings > date and time > when you uncheck 24 hour format the settings(gear) icon on notification bar moves to the right because A.M. or P.M. large font moves the icon to the right. They need to fix this, it's kinda annoying. for me only half of the gear is seen but still clickable. for many, they can't even see the gear because it's pushed to the right.
no such problem on landscape mode.
- GPS confirmed working.
Looking for Voice command for apps? like shoot for camera? answer or reject for calls?
it's not in settings > language anymore. it's in s-voice's settings now.
it is more accurate now, like in music player when you say "previous" sometimes it understands as "pause" kinda like hearing only the "vious" that sounds like "pause". it wasn't accurate with "volume down" back then, only "volume up". now it can distinguish clearly.
BTW, you don't to enable s-voice to be able to use those voice commands. you just need to enable them in s-voice's settings.
wondering what Disable HW overlays is in settings > developer options? description is Always use GPU for screen compositing.
this could help you understand.
http://forum.xda-developers.com/showpost.php?p=30346290&postcount=38
the ones i posted here are from 1st leak, they will probably be still on 2nd leak.
http://forum.xda-developers.com/showpost.php?p=30306603&postcount=369
- Pinch-to-zoom change the size of pop-up player;
- New touchwiz version with some JB news.
Sorry for my bad english.
New in JB (not sure if they were in LG4)
Peak hours on/off sync added in default email app
dormant mode
Voice recording under LED indicator
Home Screen mode change in settings --> Adds JB feature of automtically changing widget location/size
5 shortcut icons instead of 4 on lockscreen
Edit: google now, recent apps and task manager can be accessed by long pressing home button.
TW refresh is still there however its almost instant reload now
Voice cmd setting is now inside s-voice
OP.. seriously. If you want to make a thread and have [TAGS] like there's actually info here... than you have to provide some info. Right now your more asking a question and waiting to see what people say. You need to have something of relevant info if anyone is gonna take this thread seriously. I came in here thinking I could see a cool rundown of what Jelly Bean is bringing to the table, but nah. just another, mislabled topic thread title, with no useful information. This one's easy.. just freaking google your thread title and give us a nice little sneak peak at the features packed in buttery jelly beans! ... for god sake! :crying:
*EDIT* maybe the OP can edit his post after users have chimed in?
radeonxt said:
edit page on homescreen via pinch action is gone. only way now is , on homescreen press menu button > edit page
Click to expand...
Click to collapse
I still have it
Thanks for editing the Op! Now it makes sense
Sent from my GT-I9300 using xda premium
In touchwiz, folders are diferent and almost stock JB like, also on home
Men press menu there are more options now, like add apps and widgets. Also folders are possible in the dock!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-I9300 using xda premium
How can i get the 2nd leak? I can only download the 1st one. Tnx
Sent from my GT-I9300 using xda app-developers app
Davanzze said:
How can i get the 2nd leak? I can only download the 1st one. Tnx
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1835931&page=42
When taking pictures you get a white border around it indicating that a photo was taken
In apps manager the text on the tabs is smaller and you can swipe sideways to change between downloaded and all. I didn't notice this in ICS
The window to choose which program to use to open a file/default is new (see screenshots)
A whole bunch of new widgets; favourite apps, favourite settings,, favourite contacts, dialler, simple alarm, smart switch, turn off all sounds.
mnt is now called storage
Overscroll glow is now bigger
In app info window there is a check box for notifications
Wi Fi direct is not a separate item in settings but is under menu in the wi-fi window
Phone_Guru said:
When taking pictures you get a white border around it indicating that a photo was taken
Click to expand...
Click to collapse
That was in ICS too.
In apps manager the text on the tabs is smaller and you can swipe sideways to change between downloaded and all. I didn't notice this in ICS
Click to expand...
Click to collapse
Yep, that's new, its the same on the gnex.
The window to choose which program to use to open a file/default is new (see screenshots)
Click to expand...
Click to collapse
That's on the gnex too except Sammy has it themed for TW. (Aosp one looks better)
A whole bunch of new widgets; favourite apps, favourite settings,, favourite contacts, dialler, simple alarm, smart switch, turn off all sounds.
Click to expand...
Click to collapse
yup, lots of new widgets, app remodelling.
mnt is now called storage
Click to expand...
Click to collapse
This was the same on ICS, not new, there is both mnt and storage, sdcard and extsdcard are under both.
Overscroll glow is now bigger
Click to expand...
Click to collapse
Don't think so, maybe I'm wrong but it looks the same to me.
In app info window there is a check box for notifications
Click to expand...
Click to collapse
Really good new feature in JB.
Sent from my GT-I9300 using xda premium
Are the S3 native features present like smart alerts/stay etc?
sak500 said:
Are the S3 native features present like smart alerts/stay etc?
Click to expand...
Click to collapse
yes sir
The ability to change the backgroung of the message app with custom ones.
Sent from my GT-I9300 using xda premium
Dont forget to press thanks button!
Maesedroid said:
The ability to change the backgroung of the message app with custom ones.
Sent from my GT-I9300 using xda premium
Dont forget to press thanks button!
Click to expand...
Click to collapse
It was in ICS too. they have changed it from last to first
watsa said:
It was in ICS too. they have changed it from last to first
Click to expand...
Click to collapse
Oh, thanks for the info. I like it.
Noticed better battery life even better than ICS
Edit: my normal average battery life on stock ics was about 5hours on screen time. On Jb its more like 6 and a half
Sent from my GT-I9300 using xda app-developers app
prking07 said:
In touchwiz, folders are diferent and almost stock JB like, also on home
Men press menu there are more options now, like add apps and widgets. Also folders are possible in the dock!
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Which clock/weather widget do you have?
Sent from my GT-I9300 using Tapatalk 2
Issues observed:
1.Contacts: I can see a contact with moobile number 999999999999 .. not able to delete
2. i can see a S Memo icon that the regular S Memo..when i click on that it says application not installed. when i click on S memo regular one i get a message sayin S Memo has reached end of lifecycle.
3.Music: all songs present in sd card appearing twice.
4.temp on device has reached 44 degree (Monitored using OS monitor application)
fatekills said:
Issues observed:
1.Contacts: I can see a contact with moobile number 999999999999 .. not able to delete
2. i can see a S Memo icon that the regular S Memo..when i click on that it says application not installed. when i click on S memo regular one i get a message sayin S Memo has reached end of lifecycle.
3.Music: all songs present in sd card appearing twice.
4.temp on device has reached 44 degree (Monitored using OS monitor application)
Click to expand...
Click to collapse
your issue #3, i can relate because i had that issue right after i installed jb.
i was so excited after it succesfully installed that i went to exploring it right away.
wiping data on cwm solved that issue and i guess will do the same for the rest of those issues.
Paranoid Android (Jelly Bean) for Samsung Galaxy S2 HD LTE (SGH-I757M)
This is a fairly new ROM built from the Paranoid Android 2+ source code.
I do not develop this ROM nor do I provide support for it.
I felt that we needed a new topic to talk about this PAndroid ROM as the CM10 topic was getting pretty hefty and unorganized.
Since the development for this ROM is new, don't expect it to be as stable as CM9. Check "What Doesn't Work" for a list of what's broken!
If you still don't know what ClockWorkMod Recovery or Paranoid Android is, Google it or search XDA.
WARNING! Do not flash this to a different device model from the one it's meant for. It will not work with the other Galaxy S2 iterations, so don't try it with the Bell Galaxy S2 I9100M (non-HD). DO NOT flash it on the Asian variant of the GS2 HD (SHV-E120) either, as it uses slightly different internal hardware - the ROM will be unstable and the phone component will not work. If you are sure you have the CANADIAN Bell Galaxy S2 HD LTE (SGH-I757M), you may continue.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flashing The Recovery Menu
Do you have the stock recovery menu installed? If so, move to step two. If you already have CWM installed, move to "Flashing Paranoid Android"
Download Odin from here: bit.ly/WXpnCN AND download CWM Recovery here: bit.ly/WXpfDA
Start your SGH-i757m in 'Download Mode' (Shut off device. Hold the Volume Down key while powering the phone on. The device will vibrate and soon you will see a Warning screen, where you will need to press Volume Up to enter Download mode.)
While in Download Mode, start up Odin and connect your phone to the PC via USB. You should see a status message in Odin saying your device was "added".
In Odin, press the 'BOOTLOADER' button and select the CWM TAR file you downloaded from step two.
In Odin, press Start. Once Odin is done it should say "PASS". If it doesn't finish or is stuck, try re-downloading the recovery file.
Your device will reboot.
Flashing Paranoid Android
Download the latest version of PAndroid from Socim's Dev-Host: bit.ly/WK042w AND G-Apps from: bit.ly/117KEsZ
Place both *.zip files on your Micro-SD card. Do NOT Extract Them!
Start your phone into CWM Recovery mode. To accomplish this hold down the Power Button to turn the phone on, and then immediately hold down Volume Up + Volume Down at the same time. Let go of the buttons at the exact moment you see the "Samsung" Logo.
Select "Wipe Data/Factory Reset"
Then choose "Install Zip" then "Chose Zip From External SDCard" and select the PAndroid version you downloaded in step one. Do this TWICE just to be sure.
Next flash the G-Apps file you downloaded from step one the same way.
OPTIONAL: If you need to install the Stock Bell ICS Modem, now would be the time to do it. You can get it from dsixda's Dev-Host: http://bit.ly/Wu4SJe
Reboot your device.
What Doesn't Work
Some GUI elements (ie. Youtube Controls) become hidden behind content
Some camera apps display as unintended (ie. Instagram)
No touch-to-focus for camera. Regular focus does work though
"Random" crashes
Sources and Acknowledgements
Huge thanks to Socim for getting the ball rolling on this device again! bit.ly/Vc3j7d
Also, I based most of my instructions off of dsixda's posts. bit.ly/UavsHn
And to the community for not letting this amazing phone go to waste!
Click to expand...
Click to collapse
thank you so much for the ROM. A quick question though, the white flash at my hardware keys (navigation bar) remain always on. I think the light should only be activated on use.
legendofjon said:
thank you so much for the ROM. A quick question though, the white flash at my hardware keys (navigation bar) remain always on. I think the light should only be activated on use.
Click to expand...
Click to collapse
They should only stay on when charging.
Sent from my SGH-I757M using xda app-developers app
legendofjon said:
thank you so much for the ROM. A quick question though, the white flash at my hardware keys (navigation bar) remain always on. I think the light should only be activated on use.
Click to expand...
Click to collapse
I suppose it because I set touchkey autobrightness to true in framework config, so you guys who doesn't turned on autobrightness will encounter this.
Home and Search buttons don't work
ROM looks good so far, just flashed this morning. Only issue I have noticed is the home and search buttons don't work.
[UPDATE]
I reinstalled and looks like something that loaded when I restored with Titanium backup caused the home button issues. Everything looks good now.
ljdizzo said:
ROM looks good so far, just flashed this morning. Only issue I have noticed is the home and search buttons don't work.
Click to expand...
Click to collapse
Everything working great for me including the home and search buttons...this looks to be a very stable ROM...
Sent from my SGH-I757M using xda premium
im getting a status 7 error in cwm any reasons why?
Thank you for this.
Sent from my SGH-I757M using Tapatalk 2
skodazek said:
Thank you for this.
Sent from my SGH-I757M using Tapatalk 2
Click to expand...
Click to collapse
No problem! Really gave me time to truly get used to the post editor! :laugh:
Is this rom still being worked on? I have a t989d and the jb roms for it are amazingly stable and still being improved. Would love to see a jb rom for this phone become a stable daily driver.
Gonna flash this either way and check it out!
Working Good here. Great work!!!
The phablet mode 600px with a defualt DPI of 290 works great and looks great for most apps! Some may need individual adjustment. The only app that will need adjustment after reboot is the launcher. This is what you do.
You head into paranoid settings,
hit the Apps button on the left.
Then choose Trebuchet and adjust the DPI to exactly 228. Hit Apply.
This makes everything look right again. In both the drawer and on the home screen. Otherwise your apps in drawer will not fill the screen properly, and icons start looking to small. On the home screen, for some reason if you have 5 coloumns or less, you lose your last two icons on your launcher. You will also need to do the following.
head into the launcher settings,
click home screen.
Adjust the rows to your choice.
But the coloumns need to be 6 or more.
While you are in there you will also want to
enable Resize any widget
and disable wallpaper scrolling.
I also changed alot of my dpi for other individual apps, making things look even better. This rom has made my phone work and look more awesome than it was ever destined to be! Thanks to everyones continued efforts on this phone.
Only issues I have are backlight keys sometimes do not want to come back on when you unlock phone. They do come back on later tho, never really timed it. Also andom reboots. Maybe like one or two a day.
Also I should mention DO NOT install the latest gapps
gapps-jb-20121128-signed.zip
I installed it and it broke my keyboard. If you just gotta try it..... then make sure you have a nand backup done first.
To get the backlights to come on just adjust your screen brightness...lights come on, for me anyway. I have the slider in notification bar so it's not a big deal.
Sent from my SGH-I757M using xda premium
I tried it for a few minutes and half way through restoring the apps and settings, the phone got extremely hot. So now I'm back to CM10, but if anyone knows what's wrong, I'd love to try it out again.
Siavash8 said:
I tried it for a few minutes and half way through restoring the apps and settings, the phone got extremely hot. So now I'm back to CM10, but if anyone knows what's wrong, I'd love to try it out again.
Click to expand...
Click to collapse
I suggest not restoring your apps and settings using Google's wizard. Sometimes it breaks a lot. Instead, just restore your apps manually using the Play Store OR a previous Titanium Backup.
Sent from my SGH-I757M
CharlieMPK said:
I suggest not restoring your apps and settings using Google's wizard. Sometimes it breaks a lot. Instead, just restore your apps manually using the Play Store OR a previous Titanium Backup.
Sent from my SGH-I757M
Click to expand...
Click to collapse
Agree. For example some touchkeys won't work if you come from cm10.
---------- Post added at 05:26 AM ---------- Previous post was at 05:20 AM ----------
rukusx7 said:
Also I should mention DO NOT install the latest gapps
gapps-jb-20121128-signed.zip
I installed it and it broke my keyboard. If you just gotta try it..... then make sure you have a nand backup done first.
Click to expand...
Click to collapse
When we got Android 4.2 we will need it.
Hey guys just an update on my phones experience. The rom is pretty stable for me as well. However I have had a few sudden reboots and system ui crashes. As well the latest gapps do not work correctly for me for some reason so I flashed the gapps from cm9 and that works.
The sudden reboots happen mainly when watching a video or changing wallpapers and the system ui crashes out of no where.
Now I have wiped cashed partition and delvik cach which solves the above mentioned two issues it for awhile but continues again. As well re flashing the PA rom from Nov 22.
Sent from my SGH-I757M using xda premium
CharlieMPK said:
I suggest not restoring your apps and settings using Google's wizard. Sometimes it breaks a lot. Instead, just restore your apps manually using the Play Store OR a previous Titanium Backup.
Sent from my SGH-I757M
Click to expand...
Click to collapse
Actually that's what I always do. At first, I let the Play Store downloads all the apps again, and then I restore the user apps data using Titanium Backup. This way, I don't have to tap "Install" for every fricking app. But it got so hot in the middle of downloading the apps, that I kinda freaked out and got back to CM10. It may be related to the settings and configuration connected to my Google account. I'll try again without entering my user name and password at the start and see how it goes.
I ran the ROM for the better part of 16 hrs (workday testbed) other than the play store crashing here and there, I had no issues, I was very impressed. I noticed the benchmark scores were low but if anything we know they're nothing more than a number in most cases. I did have the same heating up issue with heavy file transfers but honestly couldn't give you a value of PA vs dsixda's ICS rom. Performance "felt" much smoother and more fluid. Gallery, lights and what not worked like a charm.
PA question - Where do I turn on display battery %? I'm going to run it another day with all my automated & battery apps running, see how battery life is.
Thanks for the dev on the ROM guys, really gave new life to the device. I was seriously debating axing it for another, at my own expense since its a work phone.
Everything except for the Paranoid settings, adjusts the same way as CM10. You can find the option for battery % under System Settings/system/Status Bar.
I forgot to mention one thing that had caused me issues. When I installed PANov23 I had high useage on the app named "media". I killed it have not had a problem since. I also prefer the noop or deadline scheduler and have heard that the CFQ scheduler can sometimes take some time to scan your sdcard causing high CPU useage upon bootup. I also recommend spending the money on the PRO version of Titanium Backup. If you are a frequent Flasher, and not a dirty flasher, then you SHOULD have a paid copy of this app!!
I also use GSam Battery Monitor to watch what eats my battery. Its like Better Battery Stats, but more robust. Check it out.
rukusx7 said:
Everything except for the Paranoid settings, adjusts the same way as CM10. You can find the option for battery % under System Settings/system/Status Bar.
I forgot to mention one thing that had caused me issues. When I installed PANov23 I had high useage on the app named "media". I killed it have not had a problem since. I also prefer the noop or deadline scheduler and have heard that the CFQ scheduler can sometimes take some time to scan your sdcard causing high CPU useage upon bootup. I also recommend spending the money on the PRO version of Titanium Backup. If you are a frequent Flasher, and not a dirty flasher, then you SHOULD have a paid copy of this app!!
I also use GSam Battery Monitor to watch what eats my battery. Its like Better Battery Stats, but more robust. Check it out.
Click to expand...
Click to collapse
Should have mentioned I've never been a CM10 user. I started off with Android only very recently with an S3 first and the dev wasn't there for a daily driver, then I swapped that in for a Note 2, so again, little dev atm. And then i757, so again, even less dev.
Guys...
If you have any problem related to 681 firmware, please, post it here and let's work together to solve it.
If we continue to spam [NUT] thread he could never read all that and find real problem.
I managed to flash new firmware, root it, deodex it and everything is working so I'm sure I could provide some help if someone need it.
Serajr Xposed is working great, all apps are deodexed and everything is working on LOCKED BOOTLOADER except system mount in recovery...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is the link how to deodex and flash all MODs via recovery on LB (firmware 681) so we don't have to repeat all that here.
CLICK ME
Sent from my C6903 using Tapatalk
Wait, is GravityBox working fine for you? I installed some Xposed module (forgot which one) that works with everything but gravitybox. If gravitybox is enabled then when I press the volume buttons gravitybox and the foreground app FC.
My main problem with KK:The speaker bug. Sometimes the all sounds including ringtone, notifiction and music come from the earpiece speaker. I can fix it by opening the quick settings or plugging in headphones. It's really annoying.
GravityBox will not work on Z1 4.4
Also Serajr Xposed does not work for me. the only option I have enabled is the homescreen rotation (Which I like when the phone is docked) but it cause systemUI.apk to FC
kantk20111 said:
Wait, is GravityBox working fine for you? I installed some Xposed module (forgot which one) that works with everything but gravitybox. If gravitybox is enabled then when I press the volume buttons gravitybox and the foreground app FC.
My main problem with KK:The speaker bug. Sometimes the all sounds including ringtone, notifiction and music come from the earpiece speaker. I can fix it by opening the quick settings or plugging in headphones. It's really annoying.
Click to expand...
Click to collapse
No...I'm not using Gravity, I'm using X Blast and Xperia Xposed.
BTW - @serajr will release KK version of Xperia Xposed in a next few hours (even this one is working OK, some things had to be updated).
For that speaker problem...
Restart to recovery and wipe both cache - that will do the job.
Sent from my C6903 using Tapatalk
funky0308 said:
No...I'm not using Gravity, I'm using X Blast and Xperia Xposed.
BTW - @serajr will release KK version of Xperia Xposed in a next few hours (even this one is working OK, some things had to be updated).
For that speaker problem...
Restart to recovery and wipe both cache - that will do the job.
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
For the speaker problem I tried wiping both the cache more than 5 times and i still face the speaker problem.....restarting the phone will fix this for some time and then the same issue....any other suggestions???
puneethv said:
For the speaker problem I tried wiping both the cache more than 5 times and i still face the speaker problem.....restarting the phone will fix this for some time and then the same issue....any other suggestions???
Click to expand...
Click to collapse
I bump into same problem but I was using smart features (smart calling), when I flash ROM from the scratch (only way to remove all MODs that copy their lib and etc files into system) - all gone...
I know flashing all over again is big job but it helped me...
I can't claim 100% smart features do that to OS but I flashed absolutely the same ROM (NUT 681 flashable zip and stripped ftf) and it's OK now...my device ring again like it should...
Sent from my C6903 using Tapatalk
gregbradley said:
GravityBox will not work on Z1 4.4
Also Serajr Xposed does not work for me. the only option I have enabled is the homescreen rotation (Which I like when the phone is docked) but it cause systemUI.apk to FC
Click to expand...
Click to collapse
Home rotation, power menu, hide apps from app drawer - working great on my device...
But, as serajr already announced - he'll release new module for KK today so it'll work for all...
Without FC or any other problems...
Sent from my C6903 using Tapatalk
Is anyone else losing mobile data and LTE when flashing .681? If so just reset APN to default and network settings to LTE. Maybe I'm just a noob, but it took me hours to figure this out yesterday. I figured out the LTE within minutes but the APN took me a bit.
Sent from my C6906 using XDA Premium 4 mobile app
TheJeremyWhite said:
Is anyone else losing mobile data and LTE when flashing .681? If so just reset APN to default and network settings to LTE. Maybe I'm just a noob, but it took me hours to figure this out yesterday. I figured out the LTE within minutes but the APN took me a bit.
Sent from my C6906 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You don't have to enter APN manually.
Open setting and go to more, then just hit last tab/button and wait a bit...
Also, many carriers have their own system to set all automatically...
Most probably you have to send sms with some word and you'll receive all settings
Sent from my C6903 using Tapatalk
Solid Explorer was apparently able to replace the "recovery.twrp.cpio.lzma" file in the system/bin folder and now I'm able to mount r/w through solid explorer which used to fail previously, but TWRP is still not working.
I'm having this problem on my phone, the problem is system ui is running every time and is waking lock my phone, I didn't never have this problem before, any help?
Sent from my C6906 using Tapatalk
funky0308 said:
You don't have to enter APN manually.
Open setting and go to more, then just hit last tab/button and wait a bit...
Also, many carriers have their own system to set all automatically...
Most probably you have to send sms with some word and you'll receive all settings
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
Tried that first, but at the time I could not access mobile data or wifi to download the settings. Wifi would not turn on, and the toggle was grayed out. I have since downgraded back to .136 because I am dependent on Gravity Box and I HATE the new KK "Quick Settings" panel. Nothing quick about it, adds an extra click compared to JB
Add to the thread the notorious notification tone "skips".
Any notification tone will "skip"/glitch when playing for a notification. Happens at the very beginning of your notification sound/tone
No issues when in the sounds section selecting which tone to use. No problems with phone ringtone or playing music. Happens sporadically so not every notification will glitch but happens 95% of the time.
Stock c6903 on tmobile. Unrooted and all fresh until.
Sent from my C6903 using xda app-developers app
dydu said:
Solid Explorer was apparently able to replace the "recovery.twrp.cpio.lzma" file in the system/bin folder and now I'm able to mount r/w through solid explorer which used to fail previously, but TWRP is still not working.
Click to expand...
Click to collapse
If you managed to replace that file then you always had rw in /system.
How could you replace that file without rw in system?!
Sent from my C6903 using Tapatalk
Simple Solution
TheJeremyWhite said:
:I HATE the new KK "Quick Settings" panel. Nothing quick about it, adds an extra click compared to JB
Click to expand...
Click to collapse
Just add a shortcut to 'settings' on your homescreen. Now you have lightening fast access.
I was having the volume bug and am running stock version of software downloaded from pc companion. I reinstalled the software again and hard reset it and still had the issue. It stopped happening after I removed my memory card. Still suffer from the stuttering notifications, though. The only other weird thing is when I wake up the phone I see something disappear in the top left corner of the screen. It looks like there is a notification in the bar but it vanishes by the time the screen fully draws itself.
Sent from my C6906 using Tapatalk
+1.....same thing something appears on the notification bar for a split second night then disappear.....also what's with Google sd card issues in KK because of this many of my apps which could save data on my sd card cannot save anything.....i cannot change the directory in the apps to sdcard....one of the examples in the the screenshot of double twist player......
Sent from my C6902
camera problem on unlocked bootloader
Sorry if i am posting the same question at too many places
I have C6902 with unlocked bootloader.
I falshed NUT's KK (tried doing a full wipe & cleaning camera data) but i am facing problem with camera. It opens but once i press shoot button is stops responding.
Just wanted to know if anybody knows exact fix for this problem.
Thank you
puneethv said:
+1.....same thing something appears on the notification bar for a split second night then disappear.....also what's with Google sd card issues in KK because of this many of my apps which could save data on my sd card cannot save anything.....i cannot change the directory in the apps to sdcard....one of the examples in the the screenshot of double twist player......
Sent from my C6902
Click to expand...
Click to collapse
Well one more reason to root android phones =)
Lähetetty minun C6903 laitteesta
having wifi problems with KK, i can connect at home but not at work, wtf!! every other device on my desk is connected, i even reset the router and it wont connect (it show the network, just wont connect)
Quick question for everyone that has installed xposed on their s7 edge - I'm looking for recommendations on modules to use...
I'm coming from a Sony Z3 compact so not sure if there are any must-have modules that people typically use for Samsung...
1. Anyone try Gravitybox on S7 Edge yet? Or should I stick to the one provided by Wanam
2. Any other recommendations for modules?
Thanks in advance!
I found "XTouchWiz" to be the most useful if you haven't tried it yet
lightvu said:
Quick question for everyone that has installed xposed on their s7 edge - I'm looking for recommendations on modules to use...
I'm coming from a Sony Z3 compact so not sure if there are any must-have modules that people typically use for Samsung...
1. Anyone try Gravitybox on S7 Edge yet? Or should I stick to the one provided by Wanam
2. Any other recommendations for modules?
Thanks in advance!
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
All working extremely well. No crashing or reboots
Sent from my Blackberry Bold
gravity box; lots of tweaks causing bootloops so jus have the xposed uninstaller zip...
ahamed.rafi135 said:
gravity box; lots of tweaks causing bootloops so jus have the xposed uninstaller zip...
Click to expand...
Click to collapse
Thanks for all the info - do you have a short list of the tweaks in gravitybox that doesn't work?
Reasonably long list incoming;
CrappaLinks - Fixes link clicking
Disable Instagram Double Tap - what it says on the tin
GravityBox - Needs no description
MinMinGuard - Ad blocker
NoSafeVolumeWarning - Doesn't appear to work
RootCloak - Again, what it says on the tin
Swiftkey Goodness on More Fields - more swiftkey predictions
XInsta - Download IG photos
Xposed Additions - Reprogram buttons - Very useful, I use double click power to toggle my bedroom lights
YouTube AdAway - Guess
Youtube Background Playback - Great tool
Zoom For Instagram - Again pretty self explanatory.
---------- Post added at 09:27 PM ---------- Previous post was at 09:27 PM ----------
ahamed.rafi135 said:
gravity box; lots of tweaks causing bootloops so jus have the xposed uninstaller zip...
Click to expand...
Click to collapse
Out of interest what are you running into problems with?
Most of the things I've chosen appear to work fine.
I have more in my sgs5, but now in this working :
Amplify - with the app to limit alarms ecc.
AppOpsXposed - to controls apps more (i love LBE but still doesn't working on that crap marshmallow)
Greenify - with the app to extend it
Intelli3G - to control switch to slow\fast radio gsm ecc.
MinMinGuard - AdsBlocker
Play Store Changelog - Put changelogs on top when u open an app on playstore
SNAPPREFS - Snapchat tools
Youtube AdAway - self explain
Youtube Background Playback - self explain
Chooo
Xprivacy works ?
Envoyé depuis mon SM-G925K avec Tapatalk
StonedPanda said:
Xposed Additions - Reprogram buttons - Very useful, I use double click power to toggle my bedroom lights
Click to expand...
Click to collapse
Does this work on the capacitive buttons also?
peachpuff said:
Does this work on the capacitive buttons also?
Click to expand...
Click to collapse
Yup!
StonedPanda said:
Yup!
Click to expand...
Click to collapse
How do you turn on bedroom lights lol?
Sent from my Blackberry Bold
Brava27 said:
How do you turn on bedroom lights lol?
Sent from my Blackberry Bold
Click to expand...
Click to collapse
Phillips hue bulb, with Tasker and the "AutoHue" plugin, task to 'toggle' light, task actioned by double press of power button.
I love it.
StonedPanda said:
Phillips hue bulb, with Tasker and the "AutoHue" plugin, task to 'toggle' light, task actioned by double press of power button.
I love it.
Click to expand...
Click to collapse
Haha awesome. I am gonna buy this.
Sent from my Blackberry Bold
After putting in gravitybox (and enabling a few tweaks - including updating the long press behavior of the back button) - I noticed that vibrate for my capacitive buttons have stopped working (even though it is enabled in the settings).
I also noticed that when using gravitybox, I ended up seeing 2 "PM"s appended to the end of my time, I had to manually hide it in.
Can any one confirm similar findings?
FYI - I do have xtouchwiz and gravitybox enabled at the same time....
StonedPanda said:
Yup!
Click to expand...
Click to collapse
No way... awesome!
So you can program the recents button switch back to the previous app with a long press?
lightvu said:
I also noticed that when using gravitybox, I ended up seeing 2 "PM"s appended to the end of my time, I had to manually hide it in.
Click to expand...
Click to collapse
Gravitybox puts its own pm and touchwiz puts the other pm, you have to disable one of them.
I remember having a rom with a built in center clock, then enabling another center clock with gravitybox... guess how many clocks i had?
wattx said:
I found "XTouchWiz" to be the most useful if you haven't tried it yet
Click to expand...
Click to collapse
XTouchWiz or Wanam?
EDIT: XTouchWiz is much much much better than Wanam
Amplify, Greenify, Powernap and Smart Network for some crazy battery life.
Follow this guide over here: http://forum.xda-developers.com/android/general/guide-extreme-battery-life-t3095884
Would love to see a specific Amplify guide for the S7.
lightvu said:
After putting in gravitybox (and enabling a few tweaks - including updating the long press behavior of the back button) - I noticed that vibrate for my capacitive buttons have stopped working (even though it is enabled in the settings).
I also noticed that when using gravitybox, I ended up seeing 2 "PM"s appended to the end of my time, I had to manually hide it in.
Can any one confirm similar findings?
FYI - I do have xtouchwiz and gravitybox enabled at the same time....
Click to expand...
Click to collapse
I figured out that it was [xposed additions] module that was disabling my haptic feedback for capacitive buttons =P
silly me..
That being said - does anyone know of a good module to disable the led notification after a certain time?
kimern said:
Amplify, Greenify, Powernap and Smart Network for some crazy battery life.
Follow this guide over here: http://forum.xda-developers.com/android/general/guide-extreme-battery-life-t3095884
Would love to see a specific Amplify guide for the S7.
Click to expand...
Click to collapse
What app have you withelisted because i have sleep of death with powernap on!
I just need to ask. Now I'm on EchoeRom v4, on previous versions of this ROM when I've installed Xposed from time to time phone just reboot even when it was laying on the desk. It was because of the Xposed or not? Anyone noticed it? By the way: what ROM are you using?