Database Users

[Q] Webtop without dock

Hi I am new to this forum and I'm not an expert, I really would like to use the webtop without a dock,i tried following the instructions posted here but nothing happens, I don't know what am I missing. Am I supposed to run the install file on my computer or on my phone? When I run it on my computer a black screen appears and some command and then I says to press any key and that my phone will reboot, but nothing happens. Am I supposed to do something to my phone?
I'm on att gingerbread, not rooted, I enabled debugging mode.
Thank you

You need to root and probably deodex
sent from my Atrix via XDA premium

You are probably right, but why then on Fenny's post it says no root or deodex needed??
http://forum.xda-developers.com/showthread.php?t=980193

oh well look at that,
you run the script from your computer but your phone has to be connected and have all the right drivers on your computer
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Can you please be a little more specific, I have the drivers for motorola media link and the phone portal, also for usb connection.

do you know what ADB is and how to use it?

No. I don't know... I just enabled the debugging mode on my phone

clastrag said:
No. I don't know... I just enabled the debugging mode on my phone
Click to expand...
Click to collapse
ok connect your phone to hyhour computer and make sure the computer knows it is connected
then run the script

good advice
If I were you I'd be VERY CAREFUL and investigate and learn all you can BEFORE doing any mods on your phone. Too many phones have been bricked (rendered useless) by running things you know little about.

I did that but the doesn't do anything, it doesn't reboot like it says on the script. I know it's connected because when I enable debugging I see the pop up screen for the internal memory and the sd card

Thanks for your concern I really appreciate it.what I like about this is that doesn't require root

Root
Hi
I also had exactly the same problem.
I wanted webtop, without really rooting my device.
It didnt work out. Also ran the script no reboot etc.
I then rooted my device, Fenny assisted me to create 2 files for the stock 2.2.2 atrix 4g (The older version of the os)
I copied them manually using root explorer, rebooted, and walla, i had the webtop working.
I still have those files.....
If you need them, PM me, its worth a try...

Stuck at bootscreen

Okay, I am new to the rooting and modifying android devices.. I rooted my Nexus 7 using supersu and was making modifications with ROM toolbox pro. I changed the boot screen, the font, and the wireless icon(starting out small) well when I restarted my tablet it wouldn't get past the lboot screen that I set to.
When I went into recovery mode, I tried to recovery my old system but it giving me md5 missing.. so I'm kinda of stuck
is there a direct approach to the solution?

Nice tip. Only use stuff like mods tha are on xda. Use metamorph to impalement theming stuff or flashable zips. Regaurds your situation ty flashing the rom again. Wipe data factory reset. If all else fails flash the google factory image and learn from your mistakes you made. Most problems you get in the future are pretty easily fixed with a bit of patience
Sent from my Nexus 7 using Tapatalk 2

leelaa said:
Nice tip. Only use stuff like mods tha are on xda. Use metamorph to impalement theming stuff or flashable zips. Regaurds your situation ty flashing the rom again. Wipe data factory reset. If all else fails flash the google factory image and learn from your mistakes you made. Most problems you get in the future are pretty easily fixed with a bit of patience
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
I was afraid you were going to say that.. alright thank you, I will try this a soon as possible and report back.

Hohokam337 said:
I was afraid you were going to say that.. alright thank you, I will try this a soon as possible and report back.
Click to expand...
Click to collapse
Okay so wiping the data/factory reset didn't work, how do i go about flashing the google factory image?

http://forum.xda-developers.com/showthread.php?t=1907796
Sent from my Nexus 7 using xda app-developers app

http://forum.xda-developers.com/sho...Factory Image with fastboot / return to stock
Sent from my Galaxy Nexus using Tapatalk 2

Now i am running into this error with the command prompt..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Move your android folder to the C: Drives root folder and try directing the command prompt from there.
Type :-
cd c:\Android\android-sdk\platform-tools
adb

mr_tris said:
Move your android folder to the C: Drives root folder and try directing the command prompt from there.
Type :-
cd c:\Android\android-sdk\platform-tools
adb
Click to expand...
Click to collapse
Got it,
Thank you all for the help

Sooo What am I doing wrong?

I've downloaded 4 different roms and when I try to flash them I get this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've been rooting and stuff for a few years but I usually did it on my windows PC and not my MBP, anyone care to point me into the direction of what I can do to fix this? I`m thinking it has something to do with CWM.

CashmereEsquire said:
I've downloaded 4 different roms and when I try to flash them I get this
I've been rooting and stuff for a few years but I usually did it on my windows PC and not my MBP, anyone care to point me into the direction of what I can do to fix this? I`m thinking it has something to do with CWM.
Click to expand...
Click to collapse
Had same problems I had been dragging and dropping folder locations into command line. Was told duplicates folder root permissions. Also realized was using wrong CWM. Some peoples external websites are posting faults CWM's. I don't think they really own a nexus 4. Well good luck!
---------- Post added at 10:37 PM ---------- Previous post was at 10:32 PM ----------
Found it you need 6.0.2.3 img not 6.0.3.0! Good luck!

Is there a way to me to revert back to the original recovery mode? I set it to use CWM as default when I first did the root or something like that.

CashmereEsquire said:
Is there a way to me to revert back to the original recovery mode? I set it to use CWM as default when I first did the root or something like that.
Click to expand...
Click to collapse
Need to use adb debugging push correct image over current image. Would do all tasks from unlocking boot loader to root device again make sure no duplicate permissions. Search forums for adb commands for nexus 4.

heres what I`m getting

CashmereEsquire said:
heres what I`m getting
Click to expand...
Click to collapse
are you sure the file you downloaded is for the nexus 4 (mako)
because if you go to this---> http://get.cm/?device=mako
non of those files are named just cm-10.1 download from there and you shouldnt have a problem flashing

paul_viado said:
are you sure the file you downloaded is for the nexus 4 (mako)
because if you go to this---> http://get.cm/?device=mako
non of those files are named just cm-10.1 download from there and you shouldnt have a problem flashing
Click to expand...
Click to collapse
I`m on a Mac and it unzips the file and I end up re zipping then sending to Phone. Someone just advised I download straight from device so I am trying that now. I downloaded straight from CM site, so its prob my computer shortening the file names.

CashmereEsquire said:
I`m on a Mac and it unzips the file and I end up re zipping then sending to Phone. Someone just advised I download straight from device so I am trying that now. I downloaded straight from CM site, so its prob my computer shortening the file names.
Click to expand...
Click to collapse
thats the problem. open up the safari preferences and on the bottom of general, uncheck automatically open. Then it won't unzip. or just use chrome. re zipping doesn't sign the file, and it won't work
gimme a thanks if I helped!

[Q] ADB connection problem - Device Offline

This is weird. I never had this problem with my Galaxy S3.
I've enabled USB Debugging on the phone.
Even toggled it off, rebooted and turned it on again.
I've also rebooted my computer and even updated SDK Toolkit.
No change in problem though.
Every time I try to connect to my phone from ADB, it just tells me the device is offline (see attached pic).
Any ideas?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Mine said that also one time before I accepted the adb connection on the phone
Sent from my A500 using Tapatalk HD

StolenVW said:
Mine said that also one time before I accepted the adb connection on the phone
Sent from my A500 using Tapatalk HD
Click to expand...
Click to collapse
I'm not getting any popup for that.

CZ Eddie said:
I'm not getting any popup for that.
Click to expand...
Click to collapse
Try this
http://www.wugfresh.com/faqs/how-to-fix-adb-device-is-listed-as-offline-on-android-4-2-2/
And if you do a Google search for
how to fix adb device offline
It comes up with other things to try
Sent from my A500 using Tapatalk HD

Thanks, I tried the info in that link but never got the pop-up asking for ADB permissions.
I did google prior to posting also. I listed in my OP what I tried (which is what my googling suggested).
I'm about to ODIN back to factory stock anyways. So I'll try again after that. Maybe I messed something up during all the bloatware removal I did yesterday.

Nope, a fresh ODIN install of stock ROM didn't help at all.
Guess I'll have to uninstall & reinstall Android Toolkit maybe.
EDIT:
Using Motochopper root tool, I finally got the popup. And made sure to select "always allow from this computer". I think that should fixit.
EDIT #2:
Nope, that didn't help at all. Still "offline".
EDIT #3:
Actually, using the ADB from Motochopper does work. It's just the ADB from my Android Toolkit that doesn't work.

Sounds like one in android tool kit is out of date
Try updating the android sdk
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

please help soft brick??Asus Zenfone 2 500kl Z00ed

Hi I have a little problem I wanted through FlashFire install new updates FlashFire unfortunately I got stuck, and now I can run the phone still did it triggers TWRP could someone please help me how to fix it, thank you. Asus ze500kl Z00ED

I did not have no backups ... starts with just TWRP

Just follow these steps
1. Download the official lollipop firmware for ur phone from the Asus website
2. Remove ur Sd card and either put it in another phone or an sd card reader
3. Connect the device or the reader to the computer and transfer the firmware to it
4. Put the sd card back in the original phone and boot to twrp
5. Go to install and then select storage as micro sd
6. Select the firmware ( it will be in a zip format)and flash it.
7. Then reboot should be good as new.
You'll have to unlock the boot loader again and root it again as well
---------- Post added at 09:20 AM ---------- Previous post was at 08:56 AM ----------
Also after u finish the initial setup remember to back up it'll be very helpful

I download UL-ASUS_Z00E-WW-12.8.5.222-user.zip I put the SD card and the mode TWRP I wanted to install but not work .. but it always writes error during installation

why?? please help

What error is it like does error 7 come or error 6 come?
---------- Post added at 11:33 AM ---------- Previous post was at 11:29 AM ----------
Does it say something about SKU in the error?

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

skipping md5 check : no md5 file found

abhishek_los said:
What error is it like does error 7 come or error 6 come?
---------- Post added at 11:33 AM ---------- Previous post was at 11:29 AM ----------
Does it say something about SKU in the error?
Click to expand...
Click to collapse
I have that problem.
"This package is for "WW_Phone" devices;this is a "ASUS_Z00ED"."
"E:Error executing updater binary in zip '/external_sd/UL-ASUS_Z00E-WW-12.8.5.106-user.zip"
pls help