When I start up my tablet - it shows the Asus screen and then turns off..
I can go into recovery and see RCK, Android, USB, etc but then it powers off.
The Micro SD is not there - I think my wife borrowed it.
Could the SD being missing actually cause it to power off?
kingrat said:
When I start up my tablet - it shows the Asus screen and then turns off..
I can go into recovery and see RCK, Android, USB, etc but then it powers off.
The Micro SD is not there - I think my wife borrowed it.
Could the SD being missing actually cause it to power off?
Click to expand...
Click to collapse
Can you get the fastboot protocol working? you can then reflash the stock ROM to reset.
cmendonc2 said:
Can you get the fastboot protocol working? you can then reflash the stock ROM to reset.
Click to expand...
Click to collapse
If I enter RCK It says boot recovery image and then powers off...
kingrat said:
If I enter RCK It says boot recovery image and then powers off...
Click to expand...
Click to collapse
What about USB? Have you tried that while it is plugged into a computer with the Universal Naked Drivers installed and fastboot?
cmendonc2 said:
What about USB? Have you tried that while it is plugged into a computer with the Universal Naked Drivers installed and fastboot?
Click to expand...
Click to collapse
It always does the same thing, it turns off after 5 seconds..
The computer doesn't recognize it...
Is there an option to submit an RMA
kingrat said:
It always does the same thing, it turns off after 5 seconds..
The computer doesn't recognize it...
Is there an option to submit an RMA
Click to expand...
Click to collapse
Yeah, you could do that at the Asus website or buy a motherboard on eBay and replace it yourself if you are comfortable working with electronic hardware
Related
i flashad the wrong 4.4 bootloader, now i can't boot, i can't go into recovery or fastboot, but when i turn on the phone i can hear the plug sound, and after 0.1 second the unplug sound, can i save my phone?
the phone is connected in QHSUSB_DLOAD mode now
icedzed said:
thanks to a stupid developed i flashad the wrong 4.4 bootloader, now i can't boot, i can't go into recovery or fastboot, but when i turn on the phone i can hear the plug sound, and after 0.1 second the unplug sound, can i save my phone?
the phone is connected in QHSUSB_DLOAD mode now
Click to expand...
Click to collapse
jeez, hold down up volume button for 60 secs and connect to pc,see if is recognized as QHUSB_DLOAD then u just use QPNST or LGNPST.
there are other combinations that may make that work.
yes i can see under device manager QHUSB_DLOAD, can i save my phone?
icedzed said:
yes i can see under device manager QHUSB_DLOAD, can i save my phone?
Click to expand...
Click to collapse
Read these
http://forum.xda-developers.com/showthread.php?t=2347060
http://forum.xda-developers.com/showthread.php?t=2208289
i read it but i can't going into download mode..
icedzed said:
i read it but i can't going into download mode..
Click to expand...
Click to collapse
Read a little further it tells you how to get into it...
Now get your N4 into download mode:
Turn the phone off.
Make sure the phone is off.
Plug a USB cable into your PC, AND ONLY INTO YOUR PC. THE PHONE PART COMES NEXT.
Hold down the volume up and down buttons for 2 (two) seconds on your Nexus, and continue to hold the volume up and down buttons while pluging in the USB cable which is connected to your PC. Continue to hold the buttons until the download mode screen appears. Now step five.
Once the download mode screen comes up, let go of the volume buttons.
Thanks to @Connor Baker for sharing this method
Now you should get a screen like this: (PIC OMITTED)
Click to expand...
Click to collapse
icedzed said:
thanks to a stupid developed i flashad the wrong 4.4 bootloader, now i can't boot, i can't go into recovery or fastboot, but when i turn on the phone i can hear the plug sound, and after 0.1 second the unplug sound, can i save my phone?
the phone is connected in QHSUSB_DLOAD mode now
Click to expand...
Click to collapse
Seems like you have a history with bricking phones, sorry I can't help but I think you need to rephrase your question.to get better results.
A developer would probably be the best type of person to help you but you start with "thanks to a stupid developer" see my point here?
i just flashed the 4.4 kitkat bootloader with nexus 4 toolkit, and boom, bricked..
btw i can't going into download mode, first becouse i can't turn off the phone or see if the phone is turned off, the screen is black.. then i don't understand how to enter in download mode, i have to press volume + and volume - for 2 second after? i have to release the button and repress it? i'm not english and the guide isn't perfect, i cannot understand
nothing, i try and the best result is having the red dot on the led, no fastboot or download mode, is dead.. i have to send it to lg, but.. i have the back glass broken, it's a problem for the warranty? i don't want to fix the glass, just this error
icedzed said:
i just flashed the 4.4 kitkat bootloader with nexus 4 toolkit, and boom, bricked..
btw i can't going into download mode, first becouse i can't turn off the phone or see if the phone is turned off, the screen is black.. then i don't understand how to enter in download mode, i have to press volume + and volume - for 2 second after? i have to release the button and repress it? i'm not english and the guide isn't perfect, i cannot understand
Click to expand...
Click to collapse
I'd go through those threads I linked you to and try it, it does show in QHSUSB_DLOAD mode.
You've got nothing to loose at this point
Edit...Call Google and see what they say.
Good Luck
i try, but i read like all the post and i try everything write in the post..
You flashed a wrong boot loader and your phone is really bricked! There's nothing you can do about it. And I'm pretty sure it's only your fault and nobody else's!
Sent from my Nexus 4 using Tapatalk
i know it's my fault but i flashed a nexus 4 bootloader, not nexus 7, s4 or other, that's make me angry.......
icedzed said:
i know it's my fault but i flashed a nexus 4 bootloader, not nexus 7, s4 or other, that's make me angry.......
Click to expand...
Click to collapse
Still no solution my friend in my case i got my bootloader damaged in my Nexus 4 :crying:
riff box
Hi guys,
i have a G2 D802 rooted with TWRP recovery. My brother did accidentily the OTA update. After that my LG had a bootloop TRWP.
Nothing was working, then suddenly it went black . No Screen, no battery light while charging, no recog from computer, no adb, nothing when i plug it onto the Computer. i searched tons of forums and threads , i used every method, but my phone does not do anything
Several threads are for phones with working ADB or anything working , mine isn't working at all .
What can i do ? i can't bring it to the LG shop because they told me it was rooted and rooted phones have no guarantee in our country.
Please folks does anybody had have the same problem ??
fas2802 said:
Hi guys,
i have a G2 D802 rooted with TWRP recovery. My brother did accidentily the OTA update. After that my LG had a bootloop TRWP.
Nothing was working, then suddenly it went black . No Screen, no battery light while charging, no recog from computer, no adb, nothing when i plug it onto the Computer. i searched tons of forums and threads , i used every method, but my phone does not do anything
Several threads are for phones with working ADB or anything working , mine isn't working at all .
What can i do ? i can't bring it to the LG shop because they told me it was rooted and rooted phones have no guarantee in our country.
Please folks does anybody had have the same problem ??
Click to expand...
Click to collapse
To Get ADB Working try this - http://forum.xda-developers.com/showpost.php?p=48361867&postcount=68
The OP of that thread and one additional (and similar) command found later in the thread fixed up my recovery bootloop.
CxanDroid said:
To Get ADB Working try this - http://forum.xda-developers.com/showpost.php?p=48361867&postcount=68
The OP of that thread and one additional (and similar) command found later in the thread fixed up my recovery bootloop.
Click to expand...
Click to collapse
Just 1 question where can you download "LGE Mobile Sooner Single ADB Interface" and other ADB files for G2? Tnx
battlereactiionz said:
Just 1 question where can you download "LGE Mobile Sooner Single ADB Interface" and other ADB files for G2? Tnx
Click to expand...
Click to collapse
Looks like it's part of the LG mobile driver package.
Good Luck.
TDSJR said:
Looks like it's part of the LG mobile driver package.
Good Luck.
Click to expand...
Click to collapse
hmm, nope i cannot see it in pack
Have you tried to get to power mode? Press Volume Up & and then plug in the usb cable (enter to a download mode). And flash back to stock.
Skickat från min LG-D802 via Tapatalk
Robban said:
Have you tried to get to power mode? Press Volume Up & and then plug in the usb cable (enter to a download mode). And flash back to stock.
Skickat från min LG-D802 via Tapatalk
Click to expand...
Click to collapse
for me it doesnt work at all... i cant acces download mode, twrp so im stuck in LG logo afterwards black screen
battlereactiionz said:
for me it doesnt work at all... i cant acces download mode, twrp so im stuck in LG logo afterwards black screen
Click to expand...
Click to collapse
turn your phone completely off: unplug it from the usb and hold down the power button for like 20sec. the phone should not be turning on or doing anything. then press and hold the power plus volume down. as soon as the lg logo pops up, let go of those 2 buttons and immediately press and hold power + volume down again. this should being up an all white screen with black letters. now press the power button 3 times til you get to "factory resetting". this should boot you into twrp. from there you can do whatever you want. this time do not take the OTA. hehe.
the drivers for your phone will be on lg's g2 site. make sure you've installed those with your phone unplugged from usb. if you have a previous driver installation, uninstall that. the lg drivers have the adb driver inside of it. also make sure you are using the most up to date adb.exe. if not then it may not be able to communicate with your phone. you can get that from android's sdk.
freebee269 said:
turn your phone completely off: unplug it from the usb and hold down the power button for like 20sec. the phone should not be turning on or doing anything. then press and hold the power plus volume down. as soon as the lg logo pops up, let go of those 2 buttons and immediately press and hold power + volume down again. this should being up an all white screen with black letters. now press the power button 3 times til you get to "factory resetting". this should boot you into twrp. from there you can do whatever you want. this time do not take the OTA. hehe.
the drivers for your phone will be on lg's g2 site. make sure you've installed those with your phone unplugged from usb. if you have a previous driver installation, uninstall that. the lg drivers have the adb driver inside of it. also make sure you are using the most up to date adb.exe. if not then it may not be able to communicate with your phone. you can get that from android's sdk.
Click to expand...
Click to collapse
the hard reset writes the same text on the top corner.. i really dont know how to fix the problem i have allready posted a new thread but noone responded ;(
The fact that you see anything, is a good thing. Let battery completely die, and then plug into USB while booting to download mode. I had VERY similar issue and that's worked for me, then flashed to stock.
Sent from my g2 using xda app-developers app
With your phone on, and in recovery (twrp), plug it into your computer.
Open device manager.
Look for a disabled/uninstalled (marked with yellow) device that corresponds to tour device (in my case all it said was D800).
Choose properties/driver/update driver.
From here, you have to choose all the manual options ("let me choose the driver to install"), not automatic, .
Finally Windows should show you a list of device drivers compatible with your device.
choose the LGE (or androidnet) Single Sooner ADB ...
Let it install
Test your ADB interface (ADB Devices).
TDSJR said:
The fact that you see anything, is a good thing. Let battery completely die, and then plug into USB while booting to download mode. I had VERY similar issue and that's worked for me, then flashed to stock.
Sent from my g2 using xda app-developers app
Click to expand...
Click to collapse
Do you think it will solve the problem? the only thing i need to do is to boot it in android.. i think the twrp img. was corrupted and becouse of that it doesnt work..
---------- Post added at 04:32 PM ---------- Previous post was at 04:14 PM ----------
CxanDroid said:
With your phone on, and in recovery (twrp), plug it into your computer.
Open device manager.
Look for a disabled/uninstalled (marked with yellow) device that corresponds to tour device (in my case all it said was D800).
Choose properties/driver/update driver.
From here, you have to choose all the manual options ("let me choose the driver to install"), not automatic, .
Finally Windows should show you a list of device drivers compatible with your device.
choose the LGE (or androidnet) Single Sooner ADB ...
Let it install
Test your ADB interface (ADB Devices).
Click to expand...
Click to collapse
i cannot access the twrp
battlereactiionz said:
Do you think it will solve the problem? the only thing i need to do is to boot it in android.. i think the twrp img. was corrupted and becouse of that it doesnt work..
Click to expand...
Click to collapse
Sounds identical to the problem I had. It's like a REAL slow bootloop. If you catch it just right, can you get it to factory reset? And then from there, it just does the same thing?
Ooops.
I saw bootloop twrp.
I missed the black screen.
What do you get when you hold the power button for longer than 15 seconds (force shutdown), then power it back on (hold power for a few seconds, then release)?
If you have a fully non-booting device, warranty it, of course blame it on the update.
CxanDroid said:
Ooops.
I saw bootloop twrp.
I missed the black screen.
What do you get when you hold the power button for longer than 15 seconds (force shutdown), then power it back on (hold power for a few seconds, then release)?
If you have a fully non-booting device, warranty it, of course blame it on the update.
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=fNQd4SR69-c this is what happens... if i wont be able to fix it i will have to take it to lg servis, but it will take long.
battlereactiionz said:
http://www.youtube.com/watch?v=fNQd4SR69-c this is what happens... if i wont be able to fix it i will have to take it to lg servis, but it will take long.
Click to expand...
Click to collapse
turn the phone completely off. unplug it from the usb/charger. while the phone is off, hold down volume up then plug in the usb/charger. you should automatically see download mode pop up. if that happens then you can return back to stock by googling howto's. if not then you will have to take it in.
no devices when you plug it into computer in that state?
Hopefully none of that text at the top of the screen mentions root or modified system.
freebee269 said:
turn the phone completely off. unplug it from the usb/charger. while the phone is off, hold down volume up then plug in the usb/charger. you should automatically see download mode pop up. if that happens then you can return back to stock by googling howto's. if not then you will have to take it in.
Click to expand...
Click to collapse
nope it didnt work.. same thing again
battlereactiionz said:
nope it didnt work.. same thing again
Click to expand...
Click to collapse
well now you know what you have to do. sorry about the bad news.
Had thesame problem
Sent from my HTCSensation using xda app-developers app
So I have done some searching but nothing I've tried help or not the same issue.
I was trying to root everything seemed to go fine. Phone reboots and now all it does is goes to a screen with blue letter at the top left that says recovery and then reboots. I've tried to power button home button volume key combo same thing happens. Phone keeps looping, so I pull the battery. As soon as I put it back in it starts looping again, even without me trying to turn it on.
Am I screwed? I have tried adb but it cant find the device, I assume because it keeps rebooting. Does Samsung have something like the HTC RUU or would that not matter because of the boot loop?
Any help would be great!
Thanks
PATasorus said:
So I have done some searching but nothing I've tried help or not the same issue.
I was trying to root everything seemed to go fine. Phone reboots and now all it does is goes to a screen with blue letter at the top left that says recovery and then reboots. I've tried to power button home button volume key combo same thing happens. Phone keeps looping, so I pull the battery. As soon as I put it back in it starts looping again, even without me trying to turn it on.
Am I screwed? I have tried adb but it cant find the device, I assume because it keeps rebooting. Does Samsung have something like the HTC RUU or would that not matter because of the boot loop?
Any help would be great!
Thanks
Click to expand...
Click to collapse
Most probably wrong file flashed. Look here:
http://forum.xda-developers.com/showthread.php?t=2466423
Rosli59564 said:
Most probably wrong file flashed. Look here:
http://forum.xda-developers.com/showthread.php?t=2466423
Click to expand...
Click to collapse
I have tried that but I cannot get into download mode or recovery. It just hits the black screen with blue text and reboots.
re: reboots
PATasorus said:
I have tried that but I cannot get into download mode or recovery. It just hits the black screen with blue text and reboots.
Click to expand...
Click to collapse
If you cannot get into download or recovery mode by using the
Home+VolumeDown+PowerButton or Home+VolumeUP+PowerButton
then you will need to purchase a "USB JIG" from an online store or from
eBay, it's very inexpensive $5.00 or less shipped.
You plug it into the USB port of the phone after the phone is fully
powered down. After doing that it takes less than 3 seconds for
the phone to go into "download mode" automatically.
Once its in download mode and you unplug the jig you can Odin
flash the official stock firmware/rom and have a fresh start.
I have been using a JIG for years on many models of Samsung Android
phones and it works GREAT! It even worked perfectly on a friends HTC.
Good luck!
PATasorus said:
I have tried that but I cannot get into download mode or recovery. It just hits the black screen with blue text and reboots.
Click to expand...
Click to collapse
Take the Battery out hold Vol down button and home replace battery should get you into download mode
Miketyler said:
Take the Battery out hold Vol down button and home replace battery should get you into download mode
Click to expand...
Click to collapse
Just tried that, same thing happens. Reboots.
If you cannot get into download or recovery mode by using the
Home+VolumeDown+PowerButton or Home+VolumeUP+PowerButton
then you will need to purchase a "USB JIG" from an online store or from
eBay, it's very inexpensive $5.00 or less shipped.
You plug it into the USB port of the phone after the phone is fully
powered down. After doing that it takes less than 3 seconds for
the phone to go into "download mode" automatically.
Once its in download mode and you unplug the jig you can Odin
flash the official stock firmware/rom and have a fresh start.
I have been using a JIG for years on many models of Samsung Android
phones and it works GREAT! It even worked perfectly on a friends HTC.
Good luck!
Click to expand...
Click to collapse
I will look that up. Thanks!
The JIG did the trick. Thanks!
OMG, my Shield wont boot anymore, it's stays at Nvidia Logo. I am on stock rom, with custom recovery and root.
I made a full wipe from TWRP and after reboot, Shield wont pass Nvidia logo. Any advice? I hope is not a hard brick or something, i dont know why not to boot after wipe...(
http://myprintscreen.com/s/b7ks/41bcbe9070
http://myprintscreen.com/s/b7kt/274989961f
darktyroll said:
http://myprintscreen.com/s/b7ks/41bcbe9070
http://myprintscreen.com/s/b7kt/274989961f
Click to expand...
Click to collapse
well it is told a lots of time,twrp is unstable with the shield...
there are chances you can flash again the shield by following nvidia tutorial with the power button to put it in recovery mode and flash factory images but if it does not work you are good to rma the device.
tailslol said:
well it is told a lots of time,twrp is unstable with the shield...
there are chances you can flash again the shield by following nvidia tutorial with the power button to put it in recovery mode and flash factory images but if it does not work you are good to rma the device.
Click to expand...
Click to collapse
If you reffer about the tutorial with plug in power source then press 3 seconds the power button an shield and telease it...i tryed. Same thing, nvidia logo.
If i send it back to amazon, they can find it it was rooted with custom recovery?
darktyroll said:
If you reffer about the tutorial with plug in power source then press 3 seconds the power button an shield and telease it...i tryed. Same thing, nvidia logo.
If i send it back to amazon, they can find it it was rooted with custom recovery?
Click to expand...
Click to collapse
yep but not sure. try again,if adb or fastboot detect it you are good.
tailslol said:
yep but not sure. try again,if adb or fastboot detect it you are good.
Click to expand...
Click to collapse
adb dont see my device.
anyway, when i plug in power cable, the shield turn on (without me to press power button), it is normal?
i belive the shield must power on only when i press power button, not to plug the cable in. I am right? Is weird....
My PC see the driver MTP USB, and i hear that sound when i connect to PC, but what to do more? I dont know....
darktyroll said:
adb dont see my device.
anyway, when i plug in power cable, the shield turn on (without me to press power button), it is normal?
i belive the shield must power on only when i press power button, not to plug the cable in. I am right? Is weird....
My PC see the driver MTP USB, and i hear that sound when i connect to PC, but what to do more? I dont know....
Click to expand...
Click to collapse
yep mine does that all the time. there a easy way of doing it by mashing the power button while plugin the shield (with hdmi still connected.)
Yeee, i`m happy, problem solved. Finnaly i was able to access recovery menu (via Nvidia tutorial) and flash back again stock rom.
I dont know why first 5472357242354239 times won't boot
darktyroll said:
Yeee, i`m happy, problem solved. Finnaly i was able to access recovery menu (via Nvidia tutorial) and flash back again stock rom.
I dont know why first 5472357242354239 times won't boot
Click to expand...
Click to collapse
yes the timing is super tight and finicky thats why i told you to try again,this thing is a b... to reboot in recovery.
tailslol said:
yes the timing is super tight and finicky thats why i told you to try again,this thing is a b... to reboot in recovery.
Click to expand...
Click to collapse
Very indeed. "Hard with 1 button only"
So i rooted my phone and i wanted to install GCAM using this: https://forum.xda-developers.com/mi-a1/how-to/tool-google-camera-root-magisk-enable-t3747585 and it doesn't turn on now.. It shows the xiaomi screen for like half a second and just turns black.. It vibrates, it charges (i think) but my PC doesn't see it. LED Is showing nothing.
luxerinolt said:
So i rooted my phone and i wanted to install GCAM using this: https://forum.xda-developers.com/mi-a1/how-to/tool-google-camera-root-magisk-enable-t3747585 and it doesn't turn on now.. It shows the xiaomi screen for like half a second and just turns black.. It vibrates, it charges (i think) but my PC doesn't see it. LED Is showing nothing.
Click to expand...
Click to collapse
Can you enter in fastboot?
varben said:
Can you enter in fastboot?
Click to expand...
Click to collapse
I can't do anything. I tried entering fastboot with buttons, it vibrates, but pc doesn't see anything..
EDIT:: It turns on, the fastboot screen shows for a second, the light aswell and it turns off...
EDIT:: After like 10-15 of trying to get into fastboot it worked and i managed to flash it.
luxerinolt said:
I can't do anything. I tried entering fastboot with buttons, it vibrates, but pc doesn't see anything..
EDIT:: It turns on, the fastboot screen shows for a second, the light aswell and it turns off...
EDIT:: After like 10-15 of trying to get into fastboot it worked and i managed to flash it.
Click to expand...
Click to collapse
How did you flash?
AdroitAdorKhan said:
How did you flash?
Click to expand...
Click to collapse
Using the stock rom's BAT file