my nook color is on rooted 1.0.1 firmware. can I just simply download a copy of CM7 firmware and flash my nook color with ROM Manager > ClockworkMod Recovery??
thanks for the direction in advance.
helpme said:
my nook color is on rooted 1.0.1 firmware. can I just simply download a copy of CM7 firmware and flash my nook color with ROM Manager > ClockworkMod Recovery??
thanks for the direction in advance.
Click to expand...
Click to collapse
Ok, I figured out that I can just flash strightly from booting into CWM, but which rom should I use?
Cm_core_full-118.zip or update-cm-7.0.3-encore-signed.zip?
always use the nightlies (the ones without update_) because every day or so there is a new one with new features. Always have the latest on by checking at this link:
http://cm-nightlies.appspot.com/?device=encore
Use "update-cm-7.0.3-encore-signed.zip"
because the nightlies still have major problems that are not solved.
ADude said:
Use "update-cm-7.0.3-encore-signed.zip"
because the nightlies still have major problems that are not solved.
Click to expand...
Click to collapse
A. OP this is the incorrect forum to post this.
B. At least use the newest RC so you can have deep sleep. (update-cm-7.1.0-RC1-encore-signed.zip)
C. What major problem does a nightly have?...
thanks for all the replies.
I know there are still a lot of debate on stable or nightly build but the basic idea is to flash the CM7 rom zip directly using Clockwork Recovery, right? I just downloaded a copy of update-cm-7.1.0-RC1-encore-signed.zip and cm_encore_full-118.zip. I am trying to flash them (separately) on top of my rooted nook color 1.0.1 using the Clockwork recovery that has been installed on the nook color but got the same error message:
assert failed.......
E:Error in /sdcard/cm_encore.....
(Status 7)
Installation aborted
Do any of you know why??
update: problem solved, can't use the Colorwork recovery that was installed on the nook color, need to use the one on SD card.
I un rooted and returned back to 1.0.1 because im handing my nook over to my wife. I went to b&n site downloaded the update file and followed all directions to manually update. Waited all day yesterday and the nook still hasn't seen the file on the sdcard. Can the color be directly updated from 1.0.1 to 1.4.1 or am I doing something wrong?
Did you perhaps end up with CWR on your eMMC? To check, boot into recovery and see if CWR comes up. If it does, you cannot update and will have to get rid of CWR.
I dont believe so but ill check. Thanks
Had to recreate cwm sdcard, flash 1.2 then flash 1.4.1 through cwm. Thanks.
davwman said:
Had to recreate cwm sdcard, flash 1.2 then flash 1.4.1 through cwm. Thanks.
Click to expand...
Click to collapse
For future use... download the CWM flashable 1.4.1 I posted in the return to stock thread.
davwman said:
Had to recreate cwm sdcard, flash 1.2 then flash 1.4.1 through cwm. Thanks.
Click to expand...
Click to collapse
hey i have the same problem can u tell me where u got the 1.2 update?
ellemoe said:
hey i have the same problem can u tell me where u got the 1.2 update?
Click to expand...
Click to collapse
If you want to just install the latest stock rom on your device, go to my NC tips thread linked in my signature. Look at item A15.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
I just bought a used Nook that came loaded with Cyanogenmod. I want to install a clean and newer version of CM, but it turns out that this Nook doesn't seem to have Recovery setup on it... I can boot to a bootable SD and install the new, clean version, but I want a built in recovery. I can't see to figure out how to get recovery directly on the device though... Can someone help me fix this?
Go to my NC Tips thread linked in my signature and look for the CWM recovery for emmc zip and flash that with your bootable CWM SD. I recommend the 5.5.0.4 version.
Sent from my Galaxy Tab 2 using XDA Premium
Thank you! That worked perfectly!
leapinlar said:
Go to my NC Tips thread linked in my signature and look for the CWM recovery for emmc zip and flash that with your bootable CWM SD. I recommend the 5.5.0.4 version.
Sent from my Galaxy Tab 2 using XDA Premium
Click to expand...
Click to collapse
I have a Nook color it has CM10 and clockwork recovery 5.x.x.x on it I want to upgrade it to CM11 nightly and Clockwork recovery 6. I tried the using the rom manager but it goes in to recovery mode but then fails. is there another way of updating the recovery and rom ?
thank you in advance
semitechguy said:
I have a Nook color it has CM10 and clockwork recovery 5.x.x.x on it I want to upgrade it to CM11 nightly and Clockwork recovery 6. I tried the using the rom manager but it goes in to recovery mode but then fails. is there another way of updating the recovery and rom ?
thank you in advance
Click to expand...
Click to collapse
Reboot into recovery, flash CWM 6.0.4.7, then reboot into recovery again to flash CM 11
Sent from my NookColor using xda app-developers app
Is there another way to flash it besides using SD card?
semitechguy said:
Is there another way to flash it besides using SD card?
Click to expand...
Click to collapse
Just copy the 6047 zip to internal memory, then use the 5504 to install it from internal memory. No SD necessary.
Sent from my BN NookHD+ using XDA Premium HD app
ok i tried that problem is when i got into recovery mode it only give me two options normal emmc and internal emmc recovery, the other options are unable to select internal emmc alt, sd normal, sd recovery, sd card alt. Any ideas on how to make the options available?
semitechguy said:
ok i tried that problem is when i got into recovery mode it only give me two options normal emmc and internal emmc recovery, the other options are unable to select internal emmc alt, sd normal, sd recovery, sd card alt. Any ideas on how to make the options available?
Click to expand...
Click to collapse
You are talking about the cyanoboot menu, not the CWM menu. I was talking about the CWM menu.
Sent from my SCH-i705 using Tapatalk
Yes i'm sorry its cyanboot i am trying to put clockwork mod into it
semitechguy said:
Yes i'm sorry its cyanboot i am trying to put clockwork mod into it
Click to expand...
Click to collapse
You need to explain better what you want. I thought you just wanted to update your internal CWM 5504 to 6047 so you could flash CM11 without using an SD. What has cyanoboot menu got to do with that?
Sent from my SCH-i705 using Tapatalk
ok right now my nook has recovery clockworkmod 5.x.x.x according to rom mamnager (cyanboot bootloader is what shows up when i start it) the current rom is cm 10.1.1- encore i would like to update to 6047 so i can update the cm11 nightly
semitechguy said:
ok right now my nook has recovery clockworkmod 5.x.x.x according to rom mamnager (cyanboot bootloader is what shows up when i start it) the current rom is cm 10.1.1- encore i would like to update to 6047 so i can update the cm11 nightly
Click to expand...
Click to collapse
Then just do what I said in my first post in this thread. Find a copy of the 6047 zip made for internal memory, copy that zip to emmc sdcard, boot to 5504 recovery and choose install zip from internal memory, and install that zip. Then reboot to recovery again and it will now be changed to 6047. You can use that version to flash the CM11 zip the same way you did the recovery zip. All without using the SD. And the cyanoboot has nothing to do with which version of CWM you have.
Sent from my SCH-i705 using Tapatalk
leapinlar said:
Then just do what I said in my first post in this thread. Find a copy of the 6047 zip made for internal memory, copy that zip to emmc sdcard, boot to 5504 recovery and choose install zip from internal memory, and install that zip. Then reboot to recovery again and it will now be changed to 6047. You can use that version to flash the CM11 zip the same way you did the recovery zip. All without using the SD. And the cyanoboot has nothing to do with which version of CWM you have.
Sent from my SCH-i705 using Tapatalk
Click to expand...
Click to collapse
i've tried it and well thats the problem it is not letting me choose other zip
semitechguy said:
i've tried it and well thats the problem it is not letting me choose other zip
Click to expand...
Click to collapse
Explain what you mean by 'not letting me choose other zip'.
Sent from my BN NookHD+ using XDA Premium HD app
it only let me choose being internal emmc normal, and internal emmc recovery
semitechguy said:
it only let me choose being internal emmc normal, and internal emmc recovery
Click to expand...
Click to collapse
That is the cyanoboot menu, not CWM. Choose internal emmc recovery and then you will be in CWM. Then choose install zip followed by choose zip from internal memory.
Sent from my BN NookHD+ using XDA Premium HD app
Similar problem
Hello LeapinLAr:
I also have a similar question.
Currently I have CWM Recovery V3.2.0.1 i EMMC01 and CM 10.1.2
I would like to upgrade to CWM version to 6.0.1.1 .
I tried to copy this zi file to SD card, run emmc recovery and tried to update from SD card. It did not and aborted the update.My impression was that it could not update from version to 3.2 to 6.01. Am I right in my assumption?
Could you please explain the steps , so that I can successfuly carry it out? I have got more confidence in tweaking these things ever since
I did a successful rooting of NOOK Color.
I have other question on setting the clock speed etc to run at optimum speed ( I read yesterday from the forum that it runs better if clock speed is at the minimum, but does not explain how to do that0.
Thanks for you great posts and help.
kselvan36 said:
Hello LeapinLAr:
I also have a similar question.
Currently I have CWM Recovery V3.2.0.1 i EMMC01 and CM 10.1.2
I would like to upgrade to CWM version to 6.0.1.1 .
I tried to copy this zi file to SD card, run emmc recovery and tried to update from SD card. It did not and aborted the update.My impression was that it could not update from version to 3.2 to 6.01. Am I right in my assumption?
Could you please explain the steps , so that I can successfuly carry it out? I have got more confidence in tweaking these things ever since
I did a successful rooting of NOOK Color.
I have other question on setting the clock speed etc to run at optimum speed ( I read yesterday from the forum that it runs better if clock speed is at the minimum, but does not explain how to do that.
Thanks for you great posts and help.
Click to expand...
Click to collapse
Where are you getting that 6011 CWM zip? It sounds like it is a version for a different device. Go to my NC tips thread and get a version 6012 from there and try installing that.
And the clock speed is set in settings, performance, processor.
Sent from my BN NookHD+ using XDA Premium HD app
Thanks a lot.
leapinlar said:
Where are you getting that 6011 CWM zip? It sounds like it is a version for a different device. Go to my NC tips thread and get a version 6012 from there and try installing that.
And the clock speed is set in settings, performance, processor.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Thanks a lot. I got everything done and it is working fine.
leapinlar said:
That is the cyanoboot menu, not CWM. Choose internal emmc recovery and then you will be in CWM. Then choose install zip followed by choose zip from internal memory.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
sorry i'm just frustrated with it, its not letting me choose any zip. is there a exact location where i need to put the zip i've put it in the emmc folder
semitechguy said:
sorry i'm just frustrated with it, its not letting me choose any zip. is there a exact location where i need to put the zip i've put it in the emmc folder
Click to expand...
Click to collapse
Why are you opposed to using an SDcard? You could save yourself a lot of frustration by using one.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Why are you opposed to using an SDcard? You could save yourself a lot of frustration by using one.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
well i'm not opposed to it its how i originally loaded but i was trying it without it because i tried it and was getting the same results
Quick question - I rooted my Nook Color to CM7 eons ago and it works fine, however I want to load Kit Kat on there now. Can I simply get the CM11 image and use the ancient version of CWM that I first put on it years back? Or will I need to upgrade my CWM to something more current to load the newer Kitkat kernels?
rbk123 said:
Quick question - I rooted my Nook Color to CM7 eons ago and it works fine, however I want to load Kit Kat on there now. Can I simply get the CM11 image and use the ancient version of CWM that I first put on it years back? Or will I need to upgrade my CWM to something more current to load the newer Kitkat kernels?
Click to expand...
Click to collapse
You will need to use CWM 6.0.4.7 for cm11 nightlies prior to 5/16/14. Use CWM 6.0.4.8 for cm 11 nightlies after 5/16/14.
hwong96 said:
You will need to use CWM 6.0.4.7 for cm11 nightlies prior to 5/16/14. Use CWM 6.0.4.8 for cm 11 nightlies after 5/16/14.
Click to expand...
Click to collapse
Great, thanks. As my CWM is so old (maybe 3.x?), is that just a matter of: install zip from sdcard -> choose zip from sdcard ?
rbk123 said:
Great, thanks. As my CWM is so old (maybe 3.x?), is that just a matter of: install zip from sdcard -> choose zip from sdcard ?
Click to expand...
Click to collapse
Before proceeding make a backup using CWM.
Download the appropriate CWM (e.g. for CM11 Snapshot M6 use CWM 6.0.4.7 & for CM11 5/17/14 nightly use 6.0.4.8).
Boot into current recovery.
Install zip
Choose zip to install
Reboot.
Should now see CWM-based Recovery v6.0.4.7 or 6.0.4.8
Ok, that's what I was hoping. Thanks.
nm
Can I use the latest CWM to flash CM10?
Harlley Sathler said:
Can I use the latest CWM to flash CM10?
Click to expand...
Click to collapse
No. It needs to be earlier than v6045. I have v5504 and v6012 on my NC tips thread linked in my signature.
Sent from my SCH-i705 using XDA Premium HD app