Database Users

SGS4 won't boot....

Hi guys,
My SGS4 won't boot anymore. At all.
I can (with difficulty) access my custom recovery menu (TWRP 2.5.1) and the download menu.
But whatever I'm trying to flash using ODIN from download menu, it fails! Whether it's the current ROM, official UK BTU ROM, stock recovery etc... So can't use Odin.
Can't put anything on the device either as I can't boot. When I use the "mount USB" from the TWRP menu, my PC doesn't recognize the phone so I can't put any ZIP on the phone that I could install from TWRP.
This happened when I used Triangle Away to reset the counter from 1 to 0....
I'm afraid my phone is bricked (although it's a temp phone and will be getting mine in 2 days), but I wanted to be sure that I didn't forget to do anything....
ANy ideas how to make this work pls?
thnx

vivelafrance said:
Hi guys,
My SGS4 won't boot anymore. At all.
I can (with difficulty) access my custom recovery menu (TWRP 2.5.1) and the download menu.
But whatever I'm trying to flash using ODIN from download menu, it fails! Whether it's the current ROM, official UK BTU ROM, stock recovery etc... So can't use Odin.
Can't put anything on the device either as I can't boot. When I use the "mount USB" from the TWRP menu, my PC doesn't recognize the phone so I can't put any ZIP on the phone that I could install from TWRP.
This happened when I used Triangle Away to reset the counter from 1 to 0....
I'm afraid my phone is bricked (although it's a temp phone and will be getting mine in 2 days), but I wanted to be sure that I didn't forget to do anything....
ANy ideas how to make this work pls?
thnx
Click to expand...
Click to collapse
where odin failed exactly?
did you try changing usb port? kies totally disabled? original usb cable?

thnx for your help.
- Kies is definitely not running, stopped all services and processes
- Using samsung USB cable
- Tried on several USB ports of my PC
- Using Odin 3.4
- this is what I can read in ODIN after it has failed:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAMDD_I9505VODAMD9_I9505XXUAMDD_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Thnx again.

vivelafrance said:
thnx for your help.
- Kies is definitely not running, stopped all services and processes
- Using samsung USB cable
- Tried on several USB ports of my PC
- Using Odin 3.4
- this is what I can read in ODIN after it has failed:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAMDD_I9505VODAMD9_I9505XXUAMDD_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Thnx again.
Click to expand...
Click to collapse
one more thing, remove battery for a couple of minutes, then try with odin 1.85

All of these were really good ideas, but I'm afraid none of them work!
Same error message, it seems it can't write on the damn phone. I tried to reflash TWRP, the green bar went further but at the end, same thing, fails.

vivelafrance said:
All of these were really good ideas, but I'm afraid none of them work!
Same error message, it seems it can't write on the damn phone. I tried to reflash TWRP, the green bar went further but at the end, same thing, fails.
Click to expand...
Click to collapse
i dont know if flashing pit file along with the firmware will work

yeah that's exactly what I was thinking, after clickingon your "unroot, back to stock" link in your signature...
So can I flash the firmware + Pit at the same time or should I flash pit first and then the ROM?

vivelafrance said:
yeah that's exactly what I was thinking, after clickingon your "unroot, back to stock" link in your signature...
So can I flash the firmware + Pit at the same time or should I flash pit first and then the ROM?
Click to expand...
Click to collapse
pit file is flashed with the firmware. choose the right pit for your device! re-partition will be checked automatically when you select the pit file.

still doesn't work unfortunately, don't know what 's happening....
I flashed PIT file alone, it worked fine.
Tried to install anything else, it fails again, all the time...

vivelafrance said:
still doesn't work unfortunately, don't know what 's happening....
I flashed PIT file alone, it worked fine.
Tried to install anything else, it fails again, all the time...
Click to expand...
Click to collapse
did you flash firmware with the pit file at same time and didnt work?
almost you did everything.
try to change computer if available.

no I flashed the pit file alone, cause if I flash the pit and PDA at the same time, it doesn't work either:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAME2-PRE-ROOTED-DEODEX-SUPER-SLIM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
ok well, thnx anyway for your help

vivelafrance said:
no I flashed the pit file alone, cause if I flash the pit and PDA at the same time, it doesn't work either:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAME2-PRE-ROOTED-DEODEX-SUPER-SLIM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
ok well, thnx anyway for your help
Click to expand...
Click to collapse
If you haw acess t dawnload mod you are nhot bricked pleas go and try other pc
Sent from my GT-I9505 using xda premium

First, thanks for the info that if I can access the download mode, then the phone is not bricked, I didn't know that, so thanks.
And yes, you were both right, I plugged my phone into my laptop and it worked! THANK YOU.
So the next question is: What could be the issue on my PC? It's not Kies cause it's not installed, and I already uninstalled and reinstalled the Samsung Drivers....
thnx

this is surely NOT a mobile issue if you can enter into download mode.
i had the exact issue a month ago when i had note2.
if you can't try it on another pc, try :
1) uninstall skies completely
2) unisnstall usb drivers
3) reboot the pc
4) connect your s4 in download mode to your pc.
5) let your pc install freah usb drivers
6) start odin and flash
7) if still you get the same error download a different verison of the official rom and try flashing.
i followed the above procedure couple of times and was finally able to install the rom. the issue is either with the drivers or the rom.
Sent from my GT-I9500 using xda app-developers app

bricked for sure
vivelafrance said:
First, thanks for the info that if I can access the download mode, then the phone is not bricked, I didn't know that, so thanks.
And yes, you were both right, I plugged my phone into my laptop and it worked! THANK YOU.
So the next question is: What could be the issue on my PC? It's not Kies cause it's not installed, and I already uninstalled and reinstalled the Samsung Drivers....
thnx
Click to expand...
Click to collapse
expirienced exactly same situation with i9300. Able to get to recovery but failed to flash. Tryed everything on PC and on the phone itself. You have to try different odin versions, but in my case it was NAND failure. If you failed to flash PIT your phone is for sure bricked. Sorry.
Got mainboard replacement in my case.

Have you tried putting a rom on the sdcard with an adapter.. And then put it in the phone and flash the zip from recovery?
Sent from my GT-I9505 using xda app-developers app

Bluetoth10 said:
expirienced exactly same situation with i9300. Able to get to recovery but failed to flash. Tryed everything on PC and on the phone itself. You have to try different odin versions, but in my case it was NAND failure. If you failed to flash PIT your phone is for sure bricked. Sorry.
Got mainboard replacement in my case.
Click to expand...
Click to collapse
thnx. yeah, flashing the PIT actually always worked but it was the only thing that worked! lol

DenmarkRootN00b said:
Have you tried putting a rom on the sdcard with an adapter.. And then put it in the phone and flash the zip from recovery?
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
no but good idea. Actually all the flashing work now, but I still can't boot into the phone! This is madness...
before I couldn't flash anything. Now, I flashed the original BTU ROM, Stock recovery but can't boot into recovery anymore, can't boot into the OS, the only thing that works is the download mode.
Will try to get the phone to a repair thing. I'm gonna try with samsung repair centre first cause the right ROM is installed (original) and the counter is at zero so should be fine with warranty.

vivelafrance said:
no but good idea. Actually all the flashing work now, but I still can't boot into the phone! This is madness...
before I couldn't flash anything. Now, I flashed the original BTU ROM, Stock recovery but can't boot into recovery anymore, can't boot into the OS, the only thing that works is the download mode.
Will try to get the phone to a repair thing. I'm gonna try with samsung repair centre first cause the right ROM is installed (original) and the counter is at zero so should be fine with warranty.
Click to expand...
Click to collapse
good luck at least i just thought it would work by doing it in recovery but yeah... warranty is better.. if not.. then keep trying if they wont replace it

ok I FINALLY could access the stock recovery, did a full wipe and everything is back in order now, works perfectly.
THANKS to all!

[Q] BRICKED [SGH-I337M] USING - CF-Auto-Root [CANADIAN MODELS ONLY]

So I followed this thread exactly, for my rogers I337M
[SGH-I337M] CF-Auto-Root [CANADIAN MODELS ONLY]
http://forum.xda-developers.com/showthread.php?t=2293800&highlight=cf+auto+root
and after I started ODIN after selecting the .tar.md5
I got this.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jfltecan-jfltevl-sghi337m.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
And in it says fail on ODIN. And now when I boot up I can't get to my stock OS
only to a screen where it says, "Firmware upgrade encountered an issue. Please Select recovery mode in Kies & try again."
I Can't use my S4 any more . I was wondering if it was because I had a locked bootloader, but the I337M varient should be unlocked right?
I also had the new MG1 firmware before I tried all this, but I saw alot of other MG1 users used this method.
PLEASE HELP, I would be forever grateful.

Are you sure you used the correct version for your model and are you sure you didn't have "repartition" checked in ODIN?

scott14719 said:
Are you sure you used the correct version for your model and are you sure you didn't have "repartition" checked in ODIN?
Click to expand...
Click to collapse
Completely sure.

Can you boot into download mode? If so I would Odin stock firmware and see if that helps. I have used the auto root on a couple different devices and have had no issues.
Sent from my Nexus 10

mymusicathome said:
Can you boot into download mode? If so I would Odin stock firmware and see if that helps. I have used the auto root on a couple different devices and have had no issues.
Sent from my Nexus 10
Click to expand...
Click to collapse
ok so I got the latest firmware for my device.
Build Date: 01.07.2013 -> Region: RWC (Canada (Rogers)) PDA: I337MVLUAMG1 Changelist: 897376 Android: 4.2.2
I got it from this thread
http://forum.xda-developers.com/showthread.php?t=2269304&highlight=flash+stock+firmware
I got back into the download mode (VOLDOWN/HOME/PWR) with the android icon where it says. "Downloading... Do not turn off target!!" plugged in my device got into odin put the stock firmware in PDA and ran then got this.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUAMG1_I337MOYAAMG1_I337MVLUAMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
and my device still doesn't work.

Try it a few more times. I've used odin where I got "failed" and then after a few tries got it to work.

jd1639 said:
Try it a few more times. I've used odin where I got "failed" and then after a few tries got it to work.
Click to expand...
Click to collapse
I've tried it 10 times so far with different versions of ODIN just to be sure.. No change. Would me having a USB 1.0 have anything to do with it?

I really have no idea what to do.. I have 1 year warranty left with this phone, and me trying to CF-Auto root was the only thing I've done that could have voided my warranty, but it failed and now that I'm stuck would I still be okay if I took it in for warranty?

PromyD said:
I've tried it 10 times so far with different versions of ODIN just to be sure.. No change. Would me having a USB 1.0 have anything to do with it?
Click to expand...
Click to collapse
Try it on a different computer.

jd1639 said:
Try it on a different computer.
Click to expand...
Click to collapse
agreed. or at least a different usb port. are you using the cable that came with your device? i'm assuming you had usb debugging switched on.

So i've tried it on another computer, but since my device is in download mode it doesn't install any samsung drivers to properly identify and read the S4, so it doesn't work. Can anyone please give me some direct links to download the proper usb drivers on windows for my S4.

http://lmgtfy.com/?q=samsung+galaxy+s4+drivers

Thanks to everyone that helped me troubleshoot and gave me options in figuring out the next step. I used another computer and installed the drivers on to that computer ran odin and cf auto root method and it worked like a charm. :victory:
On the first computer I used, I'm almost completely sure I had the wrong S4 Drivers installed and thats why it didn't work.
Thanks to: scott14719, mymusicathome, jd1639, xBeerdroiDx

Lo
PromyD said:
Thanks to everyone that helped me troubleshoot and gave me options in figuring out the next step. I used another computer and installed the drivers on to that computer ran odin and cf auto root method and it worked like a charm. :victory:
On the first computer I used, I'm almost completely sure I had the wrong S4 Drivers installed and thats why it didn't work.
Thanks to: scott14719, mymusicathome, jd1639, xBeerdroiDx
Click to expand...
Click to collapse
You're welcome. Glad to have helped. It's good you got your phone working again.
Ps, nvm

SGH I337M Bricked as well
I tried to odin to stock firmware after installing wicked rom v7 and KT-SGS4 kernel. the reason I wanted to odin to stock was because wicked rom kept disconnecting my wifi so I gave up. so after flashing it failed (of course) and I couldnt boot into android: "firmware update has encountered an issue..."
here is what odin said after failure:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sbl2.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
This happens all the time for me when reodining to stock, but for some reason, THIS time, it didn't. tried 11 times and got pissed off.
someone PLEASE PLEASE HELP ME!!

Copy a rooted i337M rom to your SD card. Boot into recovery , wipe and flash.
Sent from my SGH-I337M using XDA Premium 4 mobile app

I cannot boot into recovery.

Hey Overclock,
Can you confirm whether your knox flag tripped? and what build are you on? I just want to make sure the knox doesnt trip when rooting

OverclockDaS4 said:
I tried to odin to stock firmware after installing wicked rom v7 and KT-SGS4 kernel. the reason I wanted to odin to stock was because wicked rom kept disconnecting my wifi so I gave up. so after flashing it failed (of course) and I couldnt boot into android: "firmware update has encountered an issue..."
here is what odin said after failure:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sbl2.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
This happens all the time for me when reodining to stock, but for some reason, THIS time, it didn't. tried 11 times and got pissed off.
someone PLEASE PLEASE HELP ME!!
Click to expand...
Click to collapse
Take a deep breath, and try another cable. I find a large portion of flash errors are caused by junky usb cables. If that fails, try another usb port and another pc entirely, if possible. Let us know some more info, someone has already asked, more details the better. Good luck.
Sent from my SGH-I337M

pyrexid said:
Hey Overclock,
Can you confirm whether your knox flag tripped? and what build are you on? I just want to make sure the knox doesnt trip when rooting
Click to expand...
Click to collapse
Knox does trip if you root.... not sure there is any method that doesn't...... guess if its important... do some research.. I couldn't find one when I did mine... used CF-auto..... on i337m

[Q] Unroot problem: Odin FAIL

Apologies if this has been asked before, but I tried checking everywhere for a solution and couldn't come up with anything.
I have an AT&T Galaxy S4 I337. I rooted it, but now I want to unroot it. I used Odin 3v185 and this is what I get:
Screenshot: i.imgur.com/XRBVjH6.jpg
The white box on the bottom left says:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone says:
START [224, 1440]
SW REV. CHECK FAIL : fused : 2 , Binary : 1
I've tried it multiple time with the I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5 and I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 firmware. I am using the original Samsung USB cord. I've also tried it only 3 different USB ports on my computer. I am running XP. Can anyone help me?

Your on the mf3 firmware. Odin won't work. I can tell because of the "fused 2" in the Odin printout

Thanks. Is there a way to unroot it?

tcow24 said:
Thanks. Is there a way to unroot it?
Click to expand...
Click to collapse
Can you boot now? If you can unroot in super su.

tcow24 said:
Thanks. Is there a way to unroot it?
Click to expand...
Click to collapse
Yes there is, I'm guessing you are able to boot to your phone?
Here's a link and instructions you can follow. Good luck and report to us how it goes
http://forum.xda-developers.com/showthread.php?p=45340743#post45340743

It worked! Thanks JD and haremmon. I feel like an idiot for not seeing that thread.

I need some help please?
I have a Galaxy s4 rooted and I wipe the system and rebooted... I was installing a rom and did not even think anout restoring my old ones. so know I am stuck and the phone will not go into twrp, all it dose is beeps evey 3 seconds. I can get to odin download and i have downloaded stock fimware md5 files and only had one not fail on me using odin3. but it dose the same thing beeps and still can not get to recovery.. please help this is frustrating.

markdthor28 said:
I have a Galaxy s4 rooted and I wipe the system and rebooted... I was installing a rom and did not even think anout restoring my old ones. so know I am stuck and the phone will not go into twrp, all it dose is beeps evey 3 seconds. I can get to odin download and i have downloaded stock fimware md5 files and only had one not fail on me using odin3. but it dose the same thing beeps and still can not get to recovery.. please help this is frustrating.
Click to expand...
Click to collapse
pull battery,
put battery back in,
boot into odin using the physical keys (home+volume down+power),
then when it says press volume up to boot into odin, or volume down for cancel choose volume down.
Might boot up normally, i have the issue to where to recovery is messed up, all i need is the 'install-recovery.sh' but no one who has a rooted S4 running MF3 has responded to me yet..ill let you know if i fix the recovery that way.

h11wiscan said:
pull battery,
put battery back in,
boot into odin using the physical keys (home+volume down+power),
then when it says press volume up to boot into odin, or volume down for cancel choose volume down.
Might boot up normally, i have the issue to where to recovery is messed up, all i need is the 'install-recovery.sh' but no one who has a rooted S4 running MF3 has responded to me yet..ill let you know if i fix the recovery that way.
Click to expand...
Click to collapse
At this point, I don't know if you'd be able to fix it that way. The only option that many users have been doing is going to best buy with a Samsung experience area and having them reflash the MF3 firmware.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

tcow24 said:
Apologies if this has been asked before, but I tried checking everywhere for a solution and couldn't come up with anything.
I have an AT&T Galaxy S4 I337. I rooted it, but now I want to unroot it. I used Odin 3v185 and this is what I get:
Screenshot: i.imgur.com/XRBVjH6.jpg
The white box on the bottom left says:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone says:
START [224, 1440]
SW REV. CHECK FAIL : fused : 2 , Binary : 1
I've tried it multiple time with the I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5 and I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 firmware. I am using the original Samsung USB cord. I've also tried it only 3 different USB ports on my computer. I am running XP. Can anyone help me?
Click to expand...
Click to collapse
Mine is same issue, except my phone says: Unsupport dev_type, I am using samsung galaxy s3 I9300 with binary count 2.
Please help me to resolve this and unroot my device.

srikanthkata said:
Mine is same issue, except my phone says: Unsupport dev_type, I am using samsung galaxy s3 I9300 with binary count 2.
Please help me to resolve this and unroot my device.
Click to expand...
Click to collapse
Not trying to be rude but please go post this question under the GS3 forum. The GS3 forum can be found here http://forum.xda-developers.com/galaxy-s3

[Help] My Phone won't boot (Samsung Galaxy S4)

Hi guys, i been searching for long time to resolve my issue and nothing found i think you guys could help me.
The issue is
My phone was rooted - Samsung Galaxy S4 - GT-I9505
And then i unrooted, but nothing to do with this, it was all oK..
After that i tried to upgrade the firmware from sammobile something like that..
I downloaded the new firmware I9505XXUGNG8_I9505MAXGNG1_I9505XXUGNG8_HOME.tar for my phone
And in the end of the line using Odin i got FAILED red box.. And since that i can't boot my phone stuck at Odin Mode: Firmware upgrade encountered an issue. Please select recovery mode in Kies & Try again. And up with small text says: Odin Mode, PRODUCT NAME: GT-19505, CURRENT BINARY: costum, SYSTEM STATUS: costum, KNOX KERNEL LOCK: 0x0, KNOX WARRANTY VOID: 0x1, CS0-CONFIG-LS8: 0x30, WRITE PROTECTION: enable, eMMc BURST MODE: enable
i tried with Kies but i can't connect , because i think after i unrooted, i reset my phone so USB debugging is not checked. I think for that. So i'm trying to install new firmwares with Odin and is not working i always get fail message red box, i tried all versions.
Does anyone know what to do please.
i Appreciate it.
Thanks.

GoodMan14 said:
Hi guys, i been searching for long time to resolve my issue and nothing found i think you guys could help me.
The issue is
My phone was rooted - Samsung Galaxy S4 - GT-I9505
And then i unrooted, but nothing to do with this, it was all oK..
After that i tried to upgrade the firmware from sammobile something like that..
I downloaded the new firmware I9505XXUGNG8_I9505MAXGNG1_I9505XXUGNG8_HOME.tar for my phone
And in the end of the line using Odin i got FAILED red box.. And since that i can't boot my phone stuck at Odin Mode: Firmware upgrade encountered an issue. Please select recovery mode in Kies & Try again. And up with small text says: Odin Mode, PRODUCT NAME: GT-19505, CURRENT BINARY: costum, SYSTEM STATUS: costum, KNOX KERNEL LOCK: 0x0, KNOX WARRANTY VOID: 0x1, CS0-CONFIG-LS8: 0x30, WRITE PROTECTION: enable, eMMc BURST MODE: enable
i tried with Kies but i can't connect , because i think after i unrooted, i reset my phone so USB debugging is not checked. I think for that. So i'm trying to install new firmwares with Odin and is not working i always get fail message red box, i tried all versions.
Does anyone know what to do please.
i Appreciate it.
Thanks.
Click to expand...
Click to collapse
Hi mate ,
You have to flash an stock rom with odin , there is no other solution
Check this thread , i will give you in detail how to proceed
http://forum.xda-developers.com/showthread.php?t=2265477

MAX 404 said:
Hi mate ,
You have to flash an stock rom with odin , there is no other solution
Check this thread , i will give you in detail how to proceed
http://forum.xda-developers.com/showthread.php?t=2265477
Click to expand...
Click to collapse
That's what he's doing. It should be working.
It MIGHT be because you have non official firmware on it now and it's not accepting the flash back to stock. IF that's the case the solution is to uncheck auto reboot in Odin and run the install sequence twice in a row. That's worth a shot here, but I don't think it's the solution.
Do you still have a working custom recovery? If so you should still be able to flash a custom ROM. I might try flashing a custom TouchWiz rom then starting over.

Still fail !
ty for reply guys, ok i captured everything
this is image when i browse the file on AP / PDA odin freezed for few seconds...
And this is what i got:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNG8_I9505MBMGNG1_I9505XXUGNG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!

GoodMan14 said:
ty for reply guys, ok i captured everything
this is image when i browse the file on AP / PDA odin freezed for few seconds...
And this is what i got:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNG8_I9505MBMGNG1_I9505XXUGNG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Click to expand...
Click to collapse
Hi ,
This is from the post i gave you earlier
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Use pit file.
- Try another computer.
Check and see if it helps , did you try what Skipjacks said?

i di all
Hi, in this morning i tried again and passed.. finally
Thanks for helping.

GoodMan14 said:
Hi, in this morning i tried again and passed.. finally
Thanks for helping.
Click to expand...
Click to collapse
Great news mate
Sent from my Nexus 7 using XDA Premium 4 mobile app

Try flash stock firmware using odin

SM-G900T (Tmobile) tried rooting and now wont boot! HELP PLEASE!

I followed the guide here:
http://www.tomsguide.com/us/samsung-galaxy-s5-guide,review-2821-4.html
and used Odin and according to Odin3.07 everything should have gone right, but now my phone will not boot!
Please help.
I just wanted to root it to remove tmobile bloatware and now I don't have a phone.
I think the problem is that I recently updated to Tmobiles newest OTA update (maybe 5.11??) and I am guessing that this root does not work with it.
How can I get this sucker back up and running?

Please help!
Here is the output from Odin (log)
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-kltetmo-kltetmo-smg900t.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img.ext4
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)

So no download mode ? or Recovery? Not booting as in? you hold the buttons and the phone does not start?
Do you feel a vibration?

epeglab said:
So no download mode ? or Recovery? Not booting as in? you hold the buttons and the phone does not start?
Do you feel a vibration?
Click to expand...
Click to collapse
I can get into download mode and recovery mode, I just don't know what to do.

Just download the latest stock firmware and flash using odin on download mode.
http://forum.xda-developers.com/tmo.../compilation-s5-g900t-stock-firmware-t3042400
Make sure that you understand which version (you should flash the same one you were currently using ) you flash and follow the steps word for word.
EDIT: Keep the cable plugged into the computer until you have reached the boot animation. (just to be safe )
EDIT 2: you might get a boot loop so just format and clear cache. (you could probably get away with clearing the cache)

You the man!
I was downloading a firmware from SamMobile, but it was going to take 6 hours to get. Your link was only 30 minutes, and now my phone is back to its original state!
Sucks that I am not rooted (not sure if you can root 5.11) but I am sooooooooooo glad to have my phone back.
YES
Thanks!!

JohnPrime said:
You the man!
I was downloading a firmware from SamMobile, but it was going to take 6 hours to get. Your link was only 30 minutes, and now my phone is back to its original state!
Sucks that I am not rooted (not sure if you can root 5.11) but I am sooooooooooo glad to have my phone back.
YES
Thanks!!
Click to expand...
Click to collapse
You can root 5.1.1. Though you have to have a patched kernel (G900W8). I usually just flash the recovery and move to different Roms.
Sent from my SM-G900W8 using Tapatalk