Hey guys, hope you can help me.
I think this time totally bricked my phone, i was trying to flash cm11 on my e612 and i was on recovery mode, i wiped everything, including system and then installed v20 baseband, and then reboot to recovery. But for my surprise, when whas booting, the screen was in blank, with some stripes in the bottom, i think i flashed wrong baseband!, the l7 baseband... so now i cant boot into recovery, and cant flash kdz.
What do i do??? Is there anyway to unbrick it?
So many thanks
Tupic Perez1 said:
Hey guys, hope you can help me.
I think this time totally bricked my phone, i was trying to flash cm11 on my e612 and i was on recovery mode, i wiped everything, including system and then installed v20 baseband, and then reboot to recovery. But for my surprise, when whas booting, the screen was in blank, with some stripes in the bottom, i think i flashed wrong baseband!, the l7 baseband... so now i cant boot into recovery, and cant flash kdz.
What do i do??? Is there anyway to unbrick it?
So many thanks
Click to expand...
Click to collapse
Follow the gide : http://www.techdroid.in/2012/12/how-to-unbrick-lg-optimus-l5-using-kdz.html
May god light your way
Related
So i had my phone rooted and today i thought id add a custom recovery and rom. i installed recovery according to instructions and then did a data wipe at that point TWRP locked up.. same after a second try.. then i though id install the rom.. that locked up too.. now i cant get into recovery nor can i boot up... im stuck at lg logo.. this is a vzw g2. please help
Just try to flash another recovery and its should be ok then.
You can't do anything but use the attached file. Run this its the :G Mobile support tool. Then run recovery and it will download your firmware and flash it again. It will get you out of the softbrick if all else has failed.
http://forum.xda-developers.com/attachment.php?attachmentid=2289547&stc=1&d=1380406405
ddarvish said:
So i had my phone rooted and today i thought id add a custom recovery and rom. i installed recovery according to instructions and then did a data wipe at that point TWRP locked up.. same after a second try.. then i though id install the rom.. that locked up too.. now i cant get into recovery nor can i boot up... im stuck at lg logo.. this is a vzw g2. please help
Click to expand...
Click to collapse
Same thing happened to me. I followed this and fixed my problem: http://forum.xda-developers.com/showthread.php?t=2432476
Downolad lg vs980 verizon tot firmware .dll file and lg flash tool and flash it via tool
This is a different brick, I flashed a baseband v20 for L5 on the L7, when I rebooted there was only a iluminated black screen, the problem is that I can't enter on any SW/Upgrade, recovery, emergency mode etc. I'm only able to flash with fastboot, but I haven't find a way to reflash baseband or whatever to unbrick my L7.
Could you giveme something to flash and runbrick my L7?
PD: When I try to flash System.img it says "File too large"
Oh I think there is no way... To flash a new baseband you must can boot into recovery... Did you tried CWM on PC?
No
TheAvngrZ said:
Oh I think there is no way... To flash a new baseband you must can boot into recovery... Did you tried CWM on PC?
Click to expand...
Click to collapse
No, how can I do that? do I have to turn on the phone? Because it doesn't enter on any mode, just fasboot
I'm sorry, I can't help you by that thing. Seek for CWM and PC I dont know how to do it...
Enter into the Emergency Mode. By Removing the Battery & Connect to the Charger & Press home+Power+Vol up.Then Flash the ROM again
Thanks, problem solved.
Thanks to everyone, the problem was that I couldn't see when it was on emergency mode, the screen never showed me anything, because it was only in black, anyway, I tried all combination buttons until I fount that vol down+put usb without battery installed new drivers on Windows 8, then finally I could flash stock. Again thanks.
Hi,
after updating to 4.4.2 my phone is stuck on the LG logo , I can not enter the recovery mode or on the download mode, I only fastboot , and when I plug in the PC I have nothing, I tried to hard reset my phone but it changes nothing remains stuck on the logo and I can not access either to recovery or to download.
please help me the phone I had not even 2 days ago
I'm sorry for my bad english
i have lg g2 32gb stock rom 4.2.2
help pleas
Kalydei said:
Hi,
after updating to 4.4.2 my phone is stuck on the LG logo , I can not enter the recovery mode or on the download mode, I only fastboot , and when I plug in the PC I have nothing, I tried to hard reset my phone but it changes nothing remains stuck on the logo and I can not access either to recovery or to download.
please help me the phone I had not even 2 days ago
I'm sorry for my bad english
i have lg g2 32gb stock rom 4.2.2
Click to expand...
Click to collapse
Did you have Twrp or Cwm installed before update the phone?
You can NOT update your phone if you hav a custom recovery : (
no i have'nt twrp or cwm my phone is breaked i have only fastboot
You need to restore your phones download mode, recovery, logo, etc... .img files. Then, when you have restored all of that you need to flash your ROM using the .tot method/file using LG FlashTools. I made a tut that will help you http://forum.xda-developers.com/lg-g2/general/mega-tut-how-to-fix-bricked-lg-g2-t3055033
Sent from my LG-D801 using XDA Free mobile app
Hello guys! I have a big problem Please, help me. I was on Cloudy Flex 2.8 Rom. Then I decided to flash Cloudy G2 3.3 (G4 UI) Rom. Ok, I wiped dalvik, cache, system and data from TWRP then installed rom's zip. After installing was complete, rebooted my device and it stucked in boatloader. Nothing was working except Download Mode. I could enter Download Mode. Buttt, I thought that I had to enter recovery for repearing Rom or flahing another kind of rom or etc. I also, couldn't enter recover Then, I wanted to solve these problems with SRK Tool. I did this option there: Unbrick - qhsusb_bulk 9006 (No Recovery Mode,No Download Mode).
Now, when I connect my device to computer, it gives error seing "security error" on screen. Now, I want to enter recovery but I am afraid of losing my data if custom recovery lost. So, my custom recovery lost now? Or, I can enter recovery? If custom recovery lost, how can I flash it again without any losing data? Thanks in advance! Best regards!!!
Noone can help me?
http://forum.xda-developers.com/lg-g2/development-d802/tools-mini-srk-tool-d802-t3098163, please Read!!!
tinhyeuden said:
http://forum.xda-developers.com/lg-g2/development-d802/tools-mini-srk-tool-d802-t3098163, please Read!!!
Click to expand...
Click to collapse
What do you mean?
Hello everyone.
I have very serious problem. I flashed wrong firmware for my g2 and phone was booting to fastboot. But that's not the problem.... I accidentally flashed via fastboot partitions for f320l (not 320s) and since then i can't do anything to get back stock firmware or flash custom recovery. I can enter download mode, but after flashing F320S30E_00 i have kernel panic with option to go back to download mode. After installing KoreanSKT F320S F320S11G_00.kdz phone hangs on black screen after lg logo. I can also enter recovery (default), but adb push custom recovery is not working (no error, just nothing happens). Is there any hope for my f320s? Please help me... Sry for bad english.