Database Users

SOS gingerbread!

I've just flashed the new gingerbread rom (http://forum.xda-developers.com/showthread.php?t=1009177). I've found an option in the clockworkmod recovery that allows you to reboot in download mode. I did that and flashed with odin but now when the phone starts it says:
-- Copying media files...
Successfully copied media files.
# MANUAL MODE #
-- Applying Multi-CSC...
Installing Multi-CSC
Can't access to 'system/csc/TMB/system/',
Successfully appliced Multi-CSC,
Then I have the following options:
reboot system now
apply update from sd card
wipe data/factory reset
wipe cache partition
When I select any of these options nothing happens (I don't know if this matters but volume up is down and volume down is up). I've also tried to reboot the phone in download mode but it takes me to the android system recovery window. If I plug the phone to the laptop it takes me to the android system recovery window
I'm currently applying for several jobs and I NEED my phone to be operation ASAP. I would REALLY appreciate if someone could please assist?

Does the 3-button-combo work? if so go into Download mode and flash a full ROM like Darky's resurrection
After that you can try flashing JVK again or wait with experimenting until you have 1 or 2 days when you don't need your phone
or, if you have a full nandroid backup (I strongly recommend creating one regularly) just flashing any custom kernel and restore All.
Edit:
It seems like the first post has changed a bit after my post.

That is the problem. The download mode won't work. I press on volume up+volume down+on button and it still takes me to the android system recovery window.
I need to find a way to get into download mode so that I can flash the phone again.

If this happens to anyone use the three files from the first post which has bootloaders included, tick re-partition with .512 PIT and flast it again.

rawfa said:
That is the problem. The download mode won't work. I press on volume up+volume down+on button and it still takes me to the android system recovery window.
I need to find a way to get into download mode so that I can flash the phone again.
Click to expand...
Click to collapse
That's not the correct combination of keys. You should not press volume up+down.
Don't play with your phone if you need it, and don't install custom ROMs if you can't follow instructions buddy.

you should apply a proper kernel, froyo kernel doesnt work on gingerbread!!

[Q] (i9500) I flashed the leak of Lollipop and can't initiate in recovery mode

Hi, I flashed this monday the leak of Lollipop for Samsung Galaxy S4 (9500) and after I followed all the steps one by one I'm the only one in earth that isn't able to start the phone in the recovery mode. For this reason I can't flash gapps. I am not able to downgrade even because for the KNOX.
Someone has the same problem? Can anyone figured out how to enter in recovery mode?
P.D: I have attempted to do it with the buttons (vol down + pow + home) and with adb and the usb connected to the phone. Anyone was the solution.

masicen said:
Hi, I flashed this monday the leak of Lollipop for Samsung Galaxy S4 (9500) and after I followed all the steps one by one I'm the only one in earth that isn't able to start the phone in the recovery mode. For this reason I can't flash gapps. I am not able to downgrade even because for the KNOX.
Someone has the same problem? Can anyone figured out how to enter in recovery mode?
P.D: I have attempted to do it with the buttons (vol down + pow + home) and with adb and the usb connected to the phone. Anyone was the solution.
Click to expand...
Click to collapse
after flashing Rom with Odin you have to flash openrecovery-twrp-2.8.4.0-klte.tar
Installing Recovery and rooting steps :
1- download twrp from here
2- go to flash mode
3- run Odin load file as AP then click start
4- go to recovery by powering off your device and hold volume up + home + power button
5- when you want to reboot to system Twrp will ask you to install SuperSU (rooting your device)
6- swipe to confirm
More info here

haririan said:
after flashing Rom with Odin you have to flash openrecovery-twrp-2.8.4.0-klte.tar
Installing Recovery and rooting steps :
1- download twrp from here
2- go to flash mode
3- run Odin load file as AP then click start
4- go to recovery by powering off your device and hold volume up + home + power button
5- when you want to reboot to system Twrp will ask you to install SuperSU (rooting your device)
6- swipe to confirm
More info here
Click to expand...
Click to collapse
I did all of this, still can't to initiate in recovery mode.

i had the same problem, try downloading philz (philz_touch_6.48.4-i9500) or twrp recovery (openrecovery-twrp-2.8.4.0-i9500) and install via odin (AP box)
I didn't try the above i just installed the rom again, doing this:
- only the AP file
- uncheck "auto reboot"
- After the process finishes dont reboot the phone to tw, just go to the recovery mode and the wipe cache/data
- Install philz or twrp via odin

dnnz said:
i had the same problem, try downloading philz (philz_touch_6.48.4-i9500) or twrp recovery (openrecovery-twrp-2.8.4.0-i9500) and install via odin (AP box)
I didn't try the above i just installed the rom again, doing this:
- only the AP file
- uncheck "auto reboot"
- After the process finishes dont reboot the phone to tw, just go to the recovery mode and the wipe cache/data
- Install philz or twrp via odin
Click to expand...
Click to collapse
So, flash the ROM again with nothing more than the AP box fullfiled and then, when it finishes hold (vol up + power + home). Wipe cache, restart and flash custom recovery.
Am I right?

masicen said:
.........................P.D: I have attempted to do it with the buttons (vol down + pow + home) and with adb and the usb connected to the phone. Anyone was the solution.
Click to expand...
Click to collapse
masicen said:
So, flash the ROM again with nothing more than the AP box fullfiled and then, when it finishes hold (vol up + power + home). Wipe cache, restart and flash custom recovery.
Am I right?
Click to expand...
Click to collapse
It can not, because in the first flash has deleted the modem, bootloader, csc and others, so if flashing only AP will not operate the phone, only the PDA.
And masicen these questions have to do in the same thread firmware also behold the solution.
Flashes the firmware again, to start turn it off and go into Recovery by: Volume Up + Home + Power in this order and holding down until you see the Samsung logo there S4 loose and enter the stock recovery, do wipes and restart it, then download Philz Touch in its latest version and flash it with Odin and restart turn it off and try to enter the recovery now.-

lobomarino said:
It can not, because in the first flash has deleted the modem, bootloader, csc and others, so if flashing only AP will not operate the phone, only the PDA.
And masicen these questions have to do in the same thread firmware also behold the solution.
Flashes the firmware again, to start turn it off and go into Recovery by: Volume Up + Home + Power in this order and holding down until you see the Samsung logo there S4 loose and enter the stock recovery, do wipes and restart it, then download Philz Touch in its latest version and flash it with Odin and restart turn it off and try to enter the recovery now.-
Click to expand...
Click to collapse
Hi, I wasn't able to test it before but now I had my computer and I did all that you suggested and could iniciate in the recovery mode but when I tried to flash gapps an error appeared (status 6) and now I can't manage to flash it :'(
Any solution to that??
p.d: thanks for your help.

"no command" after installing TWRP in recovery mode

hey guys! first post but I have been lurking here and there before registering.
Sorry if this is the wrong section to post this in. I am trying to root my note 4 and I installed TWRP using Odin. Now when I go into recovery mode to flash SuperSu, it says "no command" with the android guy laying on the floor. I tried the factory reset option and I installed TWRP again but still same problem. I can still load my phone and use it as usual but now I can't go into recovery mode with TWRP and flash supersu to root it. Anyone know how I can fix this problem? Any help would be appreciated.

No one knows?

kratos0605 said:
hey guys! first post but I have been lurking here and there before registering.
Sorry if this is the wrong section to post this in. I am trying to root my note 4 and I installed TWRP using Odin. Now when I go into recovery mode to flash SuperSu, it says "no command" with the android guy laying on the floor. I tried the factory reset option and I installed TWRP again but still same problem. I can still load my phone and use it as usual but now I can't go into recovery mode with TWRP and flash supersu to root it. Anyone know how I can fix this problem? Any help would be appreciated.
Click to expand...
Click to collapse
What is the model number of your Note 4? When you are at the "no command" screen, try holding the volume up button and then press the power button to take you to recovery. I'd that doesn't work try holding the power button and tapping the volume up button quickly and release all buttons and see if it allows yoj to access recovery. I'd these do not work keep trying different button combinations. I'd you still cannot access the recovery menu you may have to Odin the factory firmware and start over. Let me know what happens.
Sent from my Nexus 6 using XDA-Developers mobile app

none of those button combinations work. I will install stock firmware on it again and see if that fixes the recovery.

I had this problem in the past, I think the problem was that when I was installing TWRP via Odin that I had not powered off the phone so it looked like it installed but actually didn't, try taking out the battery and then boot into recovery or download mode whatever it is that is used for Odin and install again

kratos0605 said:
none of those button combinations work. I will install stock firmware on it again and see if that fixes the recovery.
Click to expand...
Click to collapse
If you cannot get into recovery with any button combination boot to download mode and use Odin to flash all 4 files of the factory firmware. That will give you a fresh start. Let me know how it goes.
Sent from my Nexus 6 using XDA-Developers mobile app

Same here
After holding volume up+middle button+power bar
I get into recovery mode but right after recovery mode it goes into “installing system update….” and then “No command” shows up and after that I get the following message and options:
Android system recovery
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
apply update from cache
wipe/data/factory reset
wipe cache partition
reboot to bootloader
power down
View recovery logs
Enable cp logging
Disable cp logging
and at the bottom in yellow it says;
# MANUAL MODE #
— Appling Multi-CSC…
Applied the CSC-code : GLW
Successfully applied multi-CSC.
Any sort of help would be appreciated, thank you.

amk58 said:
Same here
After holding volume up+middle button+power bar
I get into recovery mode but right after recovery mode it goes into â??installing system updateâ?¦.â? and then â??No commandâ? shows up and after that I get the following message and options:
Android system recovery
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
apply update from cache
wipe/data/factory reset
wipe cache partition
reboot to bootloader
power down
View recovery logs
Enable cp logging
Disable cp logging
and at the bottom in yellow it says;
# MANUAL MODE #
â?? Appling Multi-CSCâ?¦
Applied the CSC-code : GLW
Successfully applied multi-CSC.
Any sort of help would be appreciated, thank you.
Click to expand...
Click to collapse
Use the VOLUME UP/DOWN BUTTONS to scroll to WIPE DATA/FACTORY RESET and let it do its thing. When it's done select REBOOT SYSTEM NOW.
Tell me what that does.

fast69mopar said:
Use the VOLUME UP/DOWN BUTTONS to scroll to WIPE DATA/FACTORY RESET and let it do its thing. When it's done select REBOOT SYSTEM NOW.
Tell me what that does.
Click to expand...
Click to collapse
but this will erase all my data from the phone

Yes it will but it is the most likely way out of your bootloop. Before you wipe, connect your device to your PC and boot to recovery. Once your PC recognizes your device internal storage, transfer everything that you can think of.
Sent from my Nexus 6 using XDA-Developers mobile app

fast69mopar said:
Yes it will but it is the most likely way out of your bootloop. Before you wipe, connect your device to your PC and boot to recovery. Once your PC recognizes your device internal storage, transfer everything that you can think of.
Click to expand...
Click to collapse
I'm not in bootloop
My phone is working normally.
I'm trying to root my note 4 N910H (Android 6.0.1 Marshmallow) device
I flashed TWRP recovery using Odin
now I need to boot into TWRP recovery so I can to Flash SuperSu.zip downloaded in my device
what is happening after holding volume up+middle button+power bar
I should expect a menu with install option so I can flash the SuperSUfile in the device internal memory, instead this is happening:
it goes into “installing system update….” and then “No command” shows up and after that I get the following message and options:
Android system recovery
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
apply update from cache
wipe/data/factory reset
wipe cache partition
reboot to bootloader
power down
View recovery logs
Enable cp logging
Disable cp logging
and at the bottom in yellow it says;
# MANUAL MODE #
— Appling Multi-CSC…
Applied the CSC-code : GLW
Successfully applied multi-CSC.
Click to expand...
Click to collapse
If i choose reboot system, the phone will work fine, but I need a way to access TWRP recovery so I can to Flash SuperSu

amk58 said:
I'm not in bootloop
My phone is working normally.
I'm trying to root my note 4 N910H (Android 6.0.1 Marshmallow) device
I flashed TWRP recovery using Odin
now I need to boot into TWRP recovery so I can to Flash SuperSu.zip downloaded in my device
what is happening after holding volume up+middle button+power bar
I should expect a menu with install option so I can flash the SuperSUfile in the device internal memory, instead this is happening:
If i choose reboot system, the phone will work fine, but I need a way to access TWRP recovery so I can to Flash SuperSu
Click to expand...
Click to collapse
That looks like TWRP didn't stick when you flashed it using Odin. Try a different version of Odin and flash TWRP.
Sent from my Nexus 6 using XDA-Developers mobile app

kratos0605 said:
hey guys! first post but I have been lurking here and there before registering.
Sorry if this is the wrong section to post this in. I am trying to root my note 4 and I installed TWRP using Odin. Now when I go into recovery mode to flash SuperSu, it says "no command" with the android guy laying on the floor. I tried the factory reset option and I installed TWRP again but still same problem. I can still load my phone and use it as usual but now I can't go into recovery mode with TWRP and flash supersu to root it. Anyone know how I can fix this problem? Any help would be appreciated.
Click to expand...
Click to collapse
So idk if you've gotten it fixed, but what worked for me was: I had been turning on the phone after odin did its thing, and that caused the oem recovery to reinstall itself. So instead of letting odin auto boot be ready to push the volume up button to put it into twrp recovery. I had to remove my battery to keep it from booting fully.

We need to try another time flash. Conditions - old Odin 3.06, configured to remove reboot.

swhockey347 said:
So idk if you've gotten it fixed, but what worked for me was: I had been turning on the phone after odin did its thing, and that caused the oem recovery to reinstall itself. So instead of letting odin auto boot be ready to push the volume up button to put it into twrp recovery. I had to remove my battery to keep it from booting fully.
Click to expand...
Click to collapse
thanks you saved me lot of time today !!!

Thanks - this helped me too

i have same problem
my phone is samsung j2lte
have you try untick /uncheck the "auto reboot" option on odin app. instead reboot manually after flashing twrp??
my problem not solved either

Thank you. This helped me too.

kratos0605 said:
hey guys! first post but I have been lurking here and there before registering.
Sorry if this is the wrong section to post this in. I am trying to root my note 4 and I installed TWRP using Odin. Now when I go into recovery mode to flash SuperSu, it says "no command" with the android guy laying on the floor. I tried the factory reset option and I installed TWRP again but still same problem. I can still load my phone and use it as usual but now I can't go into recovery mode with TWRP and flash supersu to root it. Anyone know how I can fix this problem? Any help would be appreciated.
Click to expand...
Click to collapse
In ODIN go to 'options' and uncheck 'auto-reboot', then flash TWRP. When it's done, it won't reboot, just pull the battery for several seconds, reinsert it and boot into TWRP Recovery.
Enjoy!

When I try to flash any thing it gets stuck on boot.img

Help with twrp

I've flashed twrp 3.2.2 for trlte version for my sm-n190s but when i go into recovery it goes into the normal stock recovery pls help

Try flashing like this: Untick auto-reboot, flash TWRP. Once done, force power off by pulling the battery, then put it back in and boot into download mode again. Flash TWRP one more time, and this time it's guaranteed to stick.

i had an issue with flashing it 2
u need to un cheek the auto restart from odin and restart it on your own by either taking the battery out or just keep pressing power and vol down and home .

J7 PRIME (TUR) STOCK RECOVERY

idk why i ported this i just think that will give me the best stable experience ever lol
BASED ON G610F G610FDDS1CTE4 TURKEY VERSION
HOW TO INSTALL
Step 1: you will needing odin becouse you cant install it from your twrp (i tried installing it from twrp and it gaved an kernel error so odin is the best for now)
Step 2: select the recovery file as AP becouse AP contains recovery and others (it only has recovery soo it will not effect your custom rom)
Step 3: Go to options and close auto restart (optional)
Step 4: Reboot your phone to download mode and plug it to your pc
Step 5: Press start
Step 6: If you enabled auto restart; When it restarts press Vol Up and Home button for your recovery. If you didnt enabled auto restart; Press Vol down power and home button to restart your phone. After screen goes black. Press Power Vol Up and Home button
(Btw if you want to go back to normal twrp u can. But you will needing odin again.)
BUGS:
-SD Card updates wont work (why u want to update it anyway u are on custom rom)
-You cant install roms. You have to switch back to ur twrp or other recovery if you want to install roms (its stock thats why u cant),
-Recovery will show it's android 8.1.0 but its not true.( becouse oreo bootloader)
-You tell me
Download:https://drive.google.com/file/d/1dBUzEF65f9HAqo5Vouxld-VHJuzR4Iu5/view