Stupid me. In my excitement to keep up with the latest news on the US Open at Torrey Pines, I downloaded and installed the mobile leaderboard from usopen.com. It was advertised as working on WM6 devices, and the install went fine. When I started the program, it blinked the screen, turned off my wifi, then quit. The US Open program is called MYlbCab.cab and is available from the www.usopen.com website.
Apparently, this crappy piece of code messes around with connection settings. I immediately uninstalled the code, but now I cannot make any data connections -- not over cellular and not over wifi. In fact, my wifi will not even connect. You know in CommMgr when you hit the button to turn on wifi and the little wheel spins in the middle of the screen for a couple of seconds and then your wifi is up? Well, that doesn't happen anymore. When I try to start wifi, the button lights up, but then nothing else happens. I can still make/receive voice calls, but no data -- no browsing, no email.
I have done multiple soft resets with no effect. I turned the phone off, took out/replaced the battery and restarted. I have double checked my connection settings, and I think they are ok. I have double checked my wlan settings, and they look good. Are there some registry settings that this US Open junk could have messed up?
I have been searching the forums for things like "hermes wifi registry" and cannot find anything that helps. Would some kind soul please answer the following --
-- Point me to a post that details the proper registry settings for wifi.
-- Is there something else that could have gotten messed up and give me the same symptoms.
Thanks.
Ok about a couple hours ago I noticed my wifi would turn itself on multiple times, and I turn it off and it keeps coming on, I think it does it when I put my phone to sleep, im not sure. I think it started happening since I installed the Blue Star 5 theme. Any ideas?
Stupid question... but you don't have Locale installed do you?
Figured I would ask. I have mine set up so that it would automatically fire up my wifi because although I get 3G outside I can't get it through my mighty wooden walls where I live. Go figure. Every so often I guess Locale looses my position and it puts me on and off the network. Pretty annoying. So I disabled that and installed some apps to keep my wifi on even while my phone sleeps. There's a few out there, Wifi Insomnia, Wi-Fi Lock, KeepWiFi are a few that I have experiment with. Although since I have all three installed now... I'm honestly not sure which one I'm using.
Binary100100 said:
Stupid question... but you don't have Locale installed do you?
Figured I would ask. I have mine set up so that it would automatically fire up my wifi because although I get 3G outside I can't get it through my mighty wooden walls where I live. Go figure. Every so often I guess Locale looses my position and it puts me on and off the network. Pretty annoying. So I disabled that and installed some apps to keep my wifi on even while my phone sleeps. There's a few out there, Wifi Insomnia, Wi-Fi Lock, KeepWiFi are a few that I have experiment with. Although since I have all three installed now... I'm honestly not sure which one I'm using.
Click to expand...
Click to collapse
Nope no Locale, I never even turned it on manually in the 1st place, idn whats wrong with it, I might uninstall the theme to see if it stops
AsaSpades said:
Nope no Locale, I never even turned it on manually in the 1st place, idn whats wrong with it, I might uninstall the theme to see if it stops
Click to expand...
Click to collapse
Hmmm. Well... maybe try seeing if it does it in safe mode if that doesn't work. If it does it in safe mode too then I dunno. If it doesn't then it's probably an app messing with it.
I heard it could be ShopSavvy that is causing that.
If you have an app like keepwifi that basically keeps your wifi signal on, that might be whats causing it. If not, you might want to try other apps that require things such as internet access or access to settings.
We need an list of apps you have installed. Power Manager will do this also.
I too am having this problem!
Sometime the wifi doesn't stay on and I only knew it was turning on thanks to wifi toggle's symbol at the top.
I am running JF's 1.43 RC9 with root etc etc.
The apps I have installed are:
ASTRO
Download crutch lite
DroidFtp
Droidsans tweak tools
fBook
GPS status
JF updater
Meebo
PapiJump
Picasa
Pkt auctions ebay
Ringdroid
Scrambled net
Shazam
Shopsavvy (my suspisions are on this one!)
Skype
Sms awake
Toggle wifi
Thanks
Phil
Okay,figured out what it is. Its the theme u downloaded. Couple hours ago my g1 started turning on the wifi whenever it felt like it.I figured it was something I downloaded recently but I downloaded apps to check them out& then uninstalled them.apps have no effect after u uninstall them.then u mentioned the theme u just downloaded. Well go figure,I just downloaded the same theme wit a few others today.then my wifi started acting up.concidence? I think not.
Lol let me know how u do.
Hmmm, im not sure if its the theme, someone mentioned the setting on ShopSavvy, after I took it off it hasnt been turning on. I still have the theme on btw, but I modified it, so it may have been ShopSavvy
wifi not turning on
My problem is different my wifi wont turn on? if i start my wifi it will show a message that wifi failed to turn on... Can anyone help me on this
Weird, i had shopsavvy from day one, never encountered such a problem. still have it, and deleted the theme. Now the wifi is back to normal. problem with the G1 is, everyone can have the same problems or issues but different solutions with each device lol. the beauty of the G1.
Btw, does anyone know if the "shake awake" app really kills the battery?
KNK said:
I heard it could be ShopSavvy that is causing that.
Click to expand...
Click to collapse
ShopSavvy is a definite cause of this problem. I've been in touch with the developers over it, and they have admitted that there's a problem with the WiFi coming on randomly
they've assured me that the next update will fix it. i hope so, because ShopSavvy was useful until it started doing this
here you go guys............i posted this in the Tethering thread as well. this will fix the issue. it is indeed Shop Savvy, but heres the fix, just copy and pasted from my other post:
Originally Posted by The Great NY
hey whats up guys,
i was having the problem as well with the disconnects. but for those of you who love having shop Savvy and still want the Tether without disconnects. here is how you fix the problem.
1. On your G1, open the Shop Savvy APP
2. once Shop savvy's screen shows up, SELECT settings
3. select PRIVACY
****you will see a phase that says "find my location" with a button to the right that will say "ON"****
4. press the button, now it should say "OFF"
5. Exit out of Shop Savvy
Voila.........no more disconnects. I have been tethering for 2 hours non-stop. happy tethering.
my wifi keeps today also itself on
I never installed Shopsavvy. So that cant be the problem.
I didnt changed anything today on my phone
The Great NY said:
here you go guys............i posted this in the Tethering thread as well. this will fix the issue. it is indeed Shop Savvy, but heres the fix, just copy and pasted from my other post:
Originally Posted by The Great NY
hey whats up guys,
i was having the problem as well with the disconnects. but for those of you who love having shop Savvy and still want the Tether without disconnects. here is how you fix the problem.
1. On your G1, open the Shop Savvy APP
2. once Shop savvy's screen shows up, SELECT settings
3. select PRIVACY
****you will see a phase that says "find my location" with a button to the right that will say "ON"****
4. press the button, now it should say "OFF"
5. Exit out of Shop Savvy
Voila.........no more disconnects. I have been tethering for 2 hours non-stop. happy tethering.
Click to expand...
Click to collapse
yes, this fixes the issue of ShopSavvy randomly switching on the WiFi and disconnecting ongoing sessions, but it completely renders the most useful thing about ShopSavvy useless.
I've been beta testing the latest version of ShopSavvy, and it doesn't seem to be doing this random WiFi anymore. It is also a version of ShopSavvy that is compatible with Cupcake 1.5.
HI, i had no problem with Wifi. Since last time I got to the hostel and have a weak access point I have a bug with Wifi : when I activate it, it says "connecting... ". But nothing happens, it doesn't list access point around me too.
I found a way to make it work: I uncheck Wifi, check airplane mode then check wifi again. It works but I have to do it every each boot or wifi deactivation..
Is there a parameters or cache file stocking the weak ap I was trying to connect when the bug appears at first?
Thank you
Problem not solved but changer: now it work but wifi is never activated at startup.. can't force it to auto activate. Strange...
Anyone else have this problem? I just started having it, first on Phiremod 6 and now just updated to 6.3 hoping for a fix, but no dice.
I have sent back 2 nooks to BN for exchange because of this issue. I didn't know doing the airplane mode thing would temporarily fix the issue. I even did the 8 hard reset and restore and the nook would get stuck on finding wifi window - turning on wifi but nothing would happen. My nook was manualnooted 1.2. Strange?
I'm on nightly-87, Dal's 1.2GHz OC Kernel 5/23, and I'm experiencing something very similar. I went from 7.0.2 to N87 without a hitch, but I immediately started to see the WiFi icon go gray and lose it's connection. I was forced to restart WiFi as a remedy. As of today I'm getting something closer to what you're talking about; when WiFi turns on, the nook will infinity cycle through: disconnected->connecting->disconnecting->scanning. I've wiped Cache, Delvik-cache many times to no avail. Also tried re-flashing N87 and the OC Kernel, which did not work. I'm still not able to connect to my home network(netgear, WPA). But, after enabling/disabling airplane mode, I was able to connect to my LG vortex and obtain the interbuttz.
The last time I did a fresh install was around N20 something. As far as possible causes to this erratic and ethereal bug, my money is on certain update paths for both the OS and Kernel having different remnants. Example: with 87 different experimental OS installs and, to a lesser degree, the three different stable OS installs. There are technically !90 different upgrade paths. Compounded by being paralleled by kernel installs, but I believe when a kernel is updated the former is completely replaced instead of merged. I'm not calling out the Dev's, it would be nearly impossible to foresee and head-off all of the permutations of merging 87+ releases.
I'm no expert, just my two-cents. I'm not really concerned about this as a long term bug. There are fine people hard at work, and unfortunately have far more pressing issues to contend with. It's a sad reality that community driven projects, notably the nook Color, rarely reach maturity or complete/efficient hardware-software integration before the allure and newness of a product wares off.
As a consumer of .rockbox, a Linux based OS for G5.5 ipods and below, Of which I've been using for years and years. And, I would say it's just now becoming 'perfect', even with it's lack of support for many peripheral devices. I'm long term with my gadgets.
I'm rambling now.
Hope this helps to narrow down symptoms and possible causes.
It seems that my problem is a known issue of cm7 (when you click airplane it stay on forever but the checkbox remains unchecked). Try a tool from market that shown me the airplane mode and unchecked it from here. Since I didn't reboot from that test I don't know if it's solved for now.
my NC on CM7 just stopped connecting too
I turned on my NC this morning and my WiFi no longer works either.
All of my hotspots say 'not in range'.
I tried all of the tools I have to turn off 'airplane' mode (just in case it was on)
but, nothing seems to get me 'out of the mode.
What can I try next?
Wifi miraculously auto-fixed itself, and then broke itself again
fulko said:
I turned on my NC this morning and my WiFi no longer works either.
All of my hotspots say 'not in range'.
I tried all of the tools I have to turn off 'airplane' mode (just in case it was on)
but, nothing seems to get me 'out of the mode.
What can I try next?
Click to expand...
Click to collapse
While researching potential solutions... CM7 auto-fixed itself after about 15 minutes.
I didn't touch it.
All of a sudden I heard the Gmail tool beep at me with new messages and the market with a few apps updates that were available.
Now it seems to be working fine.
I spoke too soon, I just powered off and on again to see if the problem was fixed
permanently, and its not... its back to the 'not working' state.
(I hate when that happens, because I don't know what caused it, and I don't know what fixed it!)
This happened (WiFi not hearing any APs) to me a few times with nightly 87, but hasn't happened since I upgraded to n94.
fulko said:
While researching potential solutions... CM7 auto-fixed itself after about 15 minutes.
I didn't touch it.
All of a sudden I heard the Gmail tool beep at me with new messages and the market with a few apps updates that were available.
Now it seems to be working fine.
I spoke too soon, I just powered off and on again to see if the problem was fixed
permanently, and its not... its back to the 'not working' state.
(I hate when that happens, because I don't know what caused it, and I don't know what fixed it!)
Click to expand...
Click to collapse
SAME! Bump.
Same issue.....latest nightly on VG SDcard solution. Never had a problem until recently. Was runnning 7.03(flawlessly) then suddenly started experiencing the issue, flashed the latest nightly (113)...worked for a bit, rebooted and now nada..... just sits at connecting..... then goes to disconnected. Cycles every couple of minutes.....
Any suggestions on what to look at?
**** Note ; WIFI works fine when I boot to EMMC (Nook 1.2) . So I do not believe this to be a hardware problem.
I was just looking for this issue also.
I was doing great with nightlies and the OC 6/18 kernal, this morning I updated to the Nightly 114, and I received no wifi connection on booting up.
So I did all the normal things (1. turn on/off the airplane mode - No change, 2. fixed permissions - no change, 3. restarted multiple time (aft all the prior changes) - no change) Ok I thought, I will go back to my previous nights backup (Nightly 113). But I still get no wifi. The widget says trying to connect, but none of my networks are showing up within range. I run wifi analyzer and I see NO networks (normally I would see about 5 to 7 of them).
So I begin stepping back, I reinstall the Nightly 113, with No OC, and while the wifi is off on bootup, once I 'turn it on' now I see my networks.
I'm cooking with gas now, so I install the OC 6/18 - No Wifi
So I install the OC 6/13 - Still no Wifi
Both times, the Nook boots up with the wifi 'off' so I turn it on, but no connection or sensitivity.
I again reflash the Nightly 113 only and while it again boots up with wifi 'off', I am able to turn it on and it actually sees my networks.
So strange, I am stuck without my OC kernal, but as least the nook works again.
Does anyone have an idea why this is happening to people?
Thanks
onclebob said:
It seems that my problem is a known issue of cm7 (when you click airplane it stay on forever but the checkbox remains unchecked). Try a tool from market that shown me the airplane mode and unchecked it from here. Since I didn't reboot from that test I don't know if it's solved for now.
Click to expand...
Click to collapse
The issue in the OP isn't related to the one you're talking about. Try deleting one or more of your remembered wifi access points with wifi on. Let it rescan and, if it's not some other issue, it should find your access points and connect.
Suffering this same issue as well on my Nook Color. I believe the problem lies under /data, and here's why. First, I made a backup of /data, and then wiped everything:
* I restored my device to factory 1.2: Wifi works
* I flashed CM7 nightly 113: Wifi works
* I flashed dalingrin's OC'd 6/18 kernel: Wifi works
* I restored /data from my backup: Wifi is stuck at "Connecting..."
I thought it might have something to do with the settings.db file under /data/data/com.android.providers.settings/databases/, but when I deleted that file and rebooted, it made no difference with the Wifi problem.
Something under /data might have a problem with the latest CM7 builds, but I couldn't say what exactly. I'm not an expert at this stuff, so I can only share what I've observed and tried for myself.
Hi. I have the same problems with Wifi since this morning. Is there any other solution then turning on and off airplane mode? thx
Formatted /system and /cache, and wiped the Dalvick cache, then flashed only CM7 nightly 143.
The problem still exists. Wifi is stuck at "Connecting..." Has anyone found a solution to this? It's obviously something to do with a setting/file under /data, because if I format /data, Wifi works like normal. But when I restore my backed up /data, Wifi is stuck at "Connecting..."
I think I found a solution. This worked for me, so I hope it works for others.
Shortly after writing my previous post above, I decided to play around with my NookColor, to see if I could get the Wifi to work normally again. Here's what I did, which fixed the "stuck at connecting" problem for me:
1) Go to Settings > Wireless & networks > Wi-Fi settings
2) Check to enable Wi-Fi, if it's not already enabled
3) Click every wireless network in your list and choose "Forget"
4) Make sure every wireless network is forgotten
5) Check to disable Wi-Fi
6) Check to re-enable Wi-Fi
Instead of "Connecting..." I now see "Scanning" and it picks up the routers around me! I selected my router, and it connected! I am now able to browse the web, update my apps, and all seems to be working normally now!
You can also watch if airplane mode is really off using Android assistant:
https://market.android.com/details?id=com.advancedprocessmanager&feature=search_result
it helped me with this problem
flansuse said:
I think I found a solution. This worked for me, so I hope it works for others.
Shortly after writing my previous post above, I decided to play around with my NookColor, to see if I could get the Wifi to work normally again. Here's what I did, which fixed the "stuck at connecting" problem for me:
1) Go to Settings > Wireless & networks > Wi-Fi settings
2) Check to enable Wi-Fi, if it's not already enabled
3) Click every wireless network in your list and choose "Forget"
4) Make sure every wireless network is forgotten
5) Check to disable Wi-Fi
6) Check to re-enable Wi-Fi
Instead of "Connecting..." I now see "Scanning" and it picks up the routers around me! I selected my router, and it connected! I am now able to browse the web, update my apps, and all seems to be working normally now!
Click to expand...
Click to collapse
That worked for me, thanks a ton!
flansuse said:
I think I found a solution. This worked for me, so I hope it works for others.
Shortly after writing my previous post above, I decided to play around with my NookColor, to see if I could get the Wifi to work normally again. Here's what I did, which fixed the "stuck at connecting" problem for me:
1) Go to Settings > Wireless & networks > Wi-Fi settings
2) Check to enable Wi-Fi, if it's not already enabled
3) Click every wireless network in your list and choose "Forget"
4) Make sure every wireless network is forgotten
5) Check to disable Wi-Fi
6) Check to re-enable Wi-Fi
Instead of "Connecting..." I now see "Scanning" and it picks up the routers around me! I selected my router, and it connected! I am now able to browse the web, update my apps, and all seems to be working normally now!
Click to expand...
Click to collapse
Man, you really had my hopes up with this one. You're the first person I've seen say every remembered network needs to be forgotten. But I followed your steps exactly, and my NC still will not connect. It sees all wireless networks available. It knows which ones are open and which ones are secured. I can go so far as to enter the password and click Connect. It says "Obtaining IP address from...", then quickly flashes "Unsuccessful", then "Scanning...", then loops indefinitely. I even took your steps one step further and rebooted before turning WiFi back on. Still doesn't work.
This is the fourth time this has happened to me. And every time, the only way I've been able to fix it is to completely reinstall CM7. That's not a fix, that's a wrecking ball. I'm pretty desperate to find a fix because my NookColor has become a joke, almost unusable. Right when I get it to the point of enjoying it and getting it set up just the way I want it, this happens. And the damn thing is useless without WiFi.
I also installed the latest nightly build, which was from last night. Nothing.
Hey, everyone! I thought I'd share my experience of a rather strange issue.
Having used several Android phones earlier, it was natural for me to restore the WiFi access points with Titanium Backup after installing CM10.1. The only problem with it was that something went wrong this time and my WiFi was draining battery much more than it should. After some testing, I found out that if WiFi had been enabled and then disabled, it would still keep a "suspend_backoff" wakelock in the kernel and therefore not put the phone in deep sleep. I thought this was a kernel issue, but after testing various kernels, this proved not to be the case. A temporary solution was to turn off WiFi and then reboot. Once having turned it on, the wakelock would always be present. Also, turning on WiFi took like 40 seconds each time, which seemed way to long.
So later, I figured I'd take a look at the contents of /data/misc/wifi. There was a file called p2p_supplicant.conf containing all the networks also included in the usual wpa_supplicant.conf. So I thought something may be wrong here and I made a backup of all the files and deleted the whole "wifi" folder so it could be regenerated by the OS after a reboot. True enough, this happened. Then I copy/pasted the network bits but not the settings from the old wpa_supplicant.conf to the new and empty one. Case solved.
It could have been caused by some WiFi fixer app that I tried earlier, but I'm not sure, since the symptoms existed even before that.
So my conclusion: When initializing, rooting and configuring a new phone, just edit the wpa_supplicant.conf manually but don't touch the parameters at the top unless you know exactly what you're doing. Paste your networks inside and push it back to /data/misc/wifi. Then set the correct permissions (0660) and ownership (system:wifi) - then reboot. Another thing, I used to include my networks in /system/etc/wifi/wpa_supplicant.conf, but it seems better to just leave that one alone, since there is trouble to be expected in case the two files have duplicate copies of the same networks.