I just bought a bluetooth headset and after connecting it with my phone, it sounds weird.. as if i hear things double.... as if the virtual room effect is turned on. When i send a message i would normaly hear "kit", but now i hear "tekit" (which is the closest i can get to explain the sound in writing)
First thing i tried was connecting it to a different device... same problem. I've tried a S4, S3, S3 mini and a Note 10.1... all have that same problem. So first thing to conclude, there is something wrong with the headphones......
But then i tried an iPhone..... it worked fine :/
So it seems to be about the basic way android sends sound to the headphones.. anything i can do?
P.S. these headphones can be connected with a jack, in case it's out of battery. If I do so, sound sounds fine.
Related
I have no idea what caused this (no drops recently) but would REALLY appreciate some help as my phone is really useless at the moment.
Presently, absolutely NO sound comes out of my phone at any point, via speakers or headphones, except during calls, where i can hear the other person but they cant hear me, i.e. microphone isnt functioning.
I have no idea what causes this, I have done a hard reset and inserted and removed headphones many times.
I should clarify that by absolutely no sound, I mean nothing on the phone works sound wise. You can in fact hear a really faint clicking/popping sound occasionally, but its grey noise, its not really quiet versions of what the sound is meant to be.
Many thanks if anyone can help!
I also made a brief voice recording on the phone and copied it to my PC to find it was blank, so microphone doesnt work outside of a call either.
.. summary: mic broken, speakers only work in a call.
Help?
Bump! Please?
try pairing with a bluetooth headset, you should be ok ... seems your sound driver is corrupt, did you by any chance increrase the preamp a lot in tcpmp and play sound for a while before experiencing this?
Cheers for the reply!
I hadn't done anything out of the ordinary like you mentioned, it just stopped working. I have done a hard reset, wouldnt that sort out a bad sound driver?
And, as far as I know I have no access to a bluetooth headset, why would that be any different anyway?
Is there any chance a rom reflash could help? I'm at last resorts here, I'm thinking about buying a palm!! (for budget reasons)
I will try it if it could work, trouble is the usb port is very dodgy, dis- and re-connects very often, so that could be dodgy for a reflash?
:'( !!
also mine is off!! just hearphone works, but built-in speakers are dead!
PLEASEEE help me!!
same problem occured to me...
if you were using a normal headset and after you plugged it out the sound started to break apart then do the following:
1-turn your media player on and start playing any audio file while volume is at MAX...
2-try to plug it in first and then test if the sound comes out of the headset normally...
3-then plug the heasdset out of the device (not all of it keep some of the jack inside the headset hole) do that in slow motion....yes...in slow motion and try to focus in making the sound goes out of the headset and the device at the sametime....
4-if you managed to make the sound BLOWS OUT from the speakers then the problem is because you plugged out the headset too quickly which generated a shock (actually i dont know if that's the accurate definition)
5- try to twist the headset jack left and right and plug it out gentely while the sound is still going out of the speakers...
and thats it...
hope your device will get well soon
same problem occured to me...
if you were using a normal headset and after you plugged it out the sound started to break apart then do the following:
1-turn your media player on and start playing any audio file while volume is at MAX...
2-try to plug it in first and then test if the sound comes out of the headset normally...
3-then plug the heasdset out of the device (not all of it keep some of the jack inside the headset hole) do that in slow motion....yes...in slow motion and try to focus in making the sound goes out of the headset and the device at the sametime....
4-if you managed to make the sound BLOWS OUT from the speakers then the problem is because you plugged out the headset too quickly which generated a shock (actually i dont know if that's the accurate definition)
5- try to twist the headset jack left and right and plug it out gentely while the sound is still going out of the speakers...
and thats it...
hope your device will get well soon
I did steps you mentioned and get my sound back!!
Thank you wizzmaster..!
Anyone know how to make the THD to ring through speakers when a call is incoming? I like to use a wired headset and have it connected all the time so I don't have to plug it in our out all the time.
Didn't notice this at first since if you have 100% System Volume you can actually hear the ring but it's coming from the headphones and not the speaker so thought it was through speakers automaticly (also read someone claiming this in another thread).
So does anyone know of a way to solve my problem? Or is it just me getting the sound through headphones only when connected?
Thanks
I have the same question...
Mine seems to randomly ring through the speakers even with a headset connected sometimes, I find it pretty annoying since I don't want it to happen. I don't know how it's caused though.
Hey,
for some reason, I can't use the microphone on any earphone/headphones with an inline mic. The audio output is fine, I can hear the sounds through my earphones. The mic, however, does not work. The main play/pause button on my earphones work as well, but the volume buttons don't.
Weird thing is, even the earphones that come with the G2 does not work, this is obviously a software problem. Is there a known fix or is there an app or something I can download to fix this problem?
Some specific problems:
sometimes when I am calling someone and I use my headphones, the mic on the phone stop working. I'm assuming the phone detects that an earphone with a inline mic is plugged in, thus turning off the one on the phone, but obviously this just ends up with them not being able to hear me at all.
In the sound recorder(where I have been checking whether the mics were working or not), the recorder doesn't detect my mic on the earphones, but it "hears" everytime I press a button on the inline mic which is interesting.
Hopefully someone has gotten this to work. I'm running CM 6.1, the specific earphones I'm trying to get working is skullcandy 50/50s (which is meant for iphone, but i've heard that iphone earphones work too). Any help would be appreciated,
Thanks.
That's been an issue for some people. My old wired headset that came with my Cliq does the same thing - audio mic is bypassed and mic on the phone is used instead.
The wired headset that came with the G2 works fine for me though. Tested it every which way with my wife on the phone and always got audio with the headset mic.
Sent from my T-Mobile G2 using XDA App
skeptical, I tried using the one that came with the G2 again, and magically it worked. I know that the whole audio/mic thing is still buggy, I probably tested it before when it was acting up. Looks like a lot of people are having success with skullcandy's FMJs so I think i'll go try them out.
I had a similar issue and I heard that wired headsets (iphone compatible) work on Stock, so I nandroided and went back to stock from Cyanogen and the headset mic worked fine, so it might be a cyanogen specific issue.
I used some really old iPhone headphones on my Note 3 the first day I had it, last week. I haven't had an iPhone since 2010, so I am talking super old and beaten to death. They worked fine.
I only mention this because I've read that some older headsets are not compatible with the S4 and Note 3.
Then I paired them with a pair of ARCTIC P253BT Bluetooth Stereo Headphones. The pairing worked, in theory. The phone and headphones seemed to think they were connected.
But all I got for audio was beeps from the headphones when it connected and the phone would play at the normal, holding-to-ear volume -- even when I clicked the button for headphones and jacked up the volume in Bluetooth Settings. This did not shock me because they are cheap headphones.
Later, I tried to use the Aux jack in my car -- no dice. Phone just acted like it didn't have headphones in.
Tried the old iPhone headphones again, phone acted like it did not have headphones in. I figured I at least had those.
Restarted -- same issue.
I realize this is a very low-level question for this forum. I have yet to ROM the phone and will probably wait until TouchWiz finally beats me down.
Part of the problem is that I had been rolling with a Nexus 4 on CM 10.2, I've been running CM for a year over multiple devices and I've never had a Samsung device.
So I just feel like I don't know how to solve anything. I realize asking for TouchWiz advice is like Yankees ownership asking Red Sox fans for advice, but I am taking a shot.
Any thoughts?
Sounds like you have a bad headphone jack or something wrong with the port connector in the motherboard. I would submit a warranty claim and get a new one.
Btw I've used Bluetooth headphones and the aux port in my car it works perfect.
sent from my ROOT powerd Note3
metalsnakebite said:
Sounds like you have a bad headphone jack or something wrong with the port connector in the motherboard. I would submit a warranty claim and get a new one.
Btw I've used Bluetooth headphones and the aux port in my car it works perfect.
sent from my ROOT powerd Note3
Click to expand...
Click to collapse
Wow, seriously? I did not expect it to be that extreme. Whatever went wrong happened some time after I initially used the first set of ear buds.
So maybe I did it? I have been treating the thing like gold, though.
You say that it does nothing when you plug in a headphone right? Like there is nothing connected?
sent from my ROOT powerd Note3
Similar issue solved after powering phone off/on
metalsnakebite said:
You say that it does nothing when you plug in a headphone right? Like there is nothing connected?
sent from my ROOT powerd Note3
Click to expand...
Click to collapse
I've been having the same issue and it seems to correct itself if power my phone off/on, but I'm not happy about the headphone jack being so unreliable on a brand new phone. I've plugged in headphones and an aux out headphone cord and experienced this problem. When the issue arises, the phone will pause for a second as if it's going to send audio to the headphones or aux out device, the unit states "headphones connected" in the notification tray, and then within a second of doing so the audio continues to come from the Note 3 speakers instead of the headphones or external speakers.
metalsnakebite said:
You say that it does nothing when you plug in a headphone right? Like there is nothing connected?
sent from my ROOT powerd Note3
Click to expand...
Click to collapse
It works for one second then either gets really dim or starts playing at the normal call volume (not speaker volume). I took it to the store today and They had no idea. They thought they were very clever when they first got it and I told them all the setting they were planning to try had already been confirmed. They went through the motions. No dice.
They think it is a hardware issue.
If it is a hardware and that is what it sounds like then, you can submit a manufacturer warranty claim with Verizon Wireless.
sent from my ROOT powerd Note3
metalsnakebite said:
If it is a hardware and that is what it sounds like then, you can submit a manufacturer warranty claim with Verizon Wireless.
sent from my ROOT powerd Note3
Click to expand...
Click to collapse
I did that and got a new one. Same issue. Insane. Must be something in my settings.
Solution
bmcs9119 said:
I did that and got a new one. Same issue. Insane. Must be something in my settings.
Click to expand...
Click to collapse
My solution to this behavior (YMMV, but I had the exact same behavior)
The issue ended up being the case. It was generating enough of a standoff that the AUX cable wasn't making complete connection. I think the Note is configured to only recognize a headphone output if both channels are making connection (which is slightly atypical behavior).
TL;DR: If you're having a similar problem, try taking off your case.
Car aux input does not work
GirlMeetsGym said:
I've been having the same issue and it seems to correct itself if power my phone off/on, but I'm not happy about the headphone jack being so unreliable on a brand new phone. I've plugged in headphones and an aux out headphone cord and experienced this problem. When the issue arises, the phone will pause for a second as if it's going to send audio to the headphones or aux out device, the unit states "headphones connected" in the notification tray, and then within a second of doing so the audio continues to come from the Note 3 speakers instead of the headphones or external speakers.
Click to expand...
Click to collapse
I'd like to add my voice to the chorus. Almost identical problem. Works perfectly on all other devices but not 2007 Saab aux. Worked with former Note 2. I tried 3 different cables. Plays fine for a little while then audio directed to phone speaker when notification sounds. I have no case. Pretty sure it's not cabling. Heard it was low impedance headphones. My carrier has not heard of this. I belive it's a compatibility issue with the aux port. Trying bluetooth alternative. I dislike the Hassel but at a loss for now. Maybe Kitkat?
I am having the same issue on a phone that is less than a week old. Headphones work, then later they don't. It shows them connected, briefly sends audio to earphone, then to phone speaker. Reboot fixes it.
Sent from my SM-N900T using Tapatalk
Had the same issue im sure this was tried but make sure your headphones or anything else is plugged in all the way the connection on these things is shotty at best anything you use must be all the way in or it wont work
jolly_roger_hook said:
Had the same issue im sure this was tried but make sure your headphones or anything else is plugged in all the way the connection on these things is shotty at best anything you use must be all the way in or it wont work
Click to expand...
Click to collapse
I don't think this is a hardware issue as the behaviour doesn't really make sense. I suspect it has to do with the service that detects whether headphones are connected or not.
I have this issue from time to time with multiple pairs of headphones.
A restart usually fixes it, but not straight away. I usually have to wait a minute or two after the gui is loaded before the headphones will be detected again.
Hi friends
I have a big issue since.. today.
When i connect (and its only on my phone i try on my friend's phone) the bluetooth speaker on my phone, all gone crazy, i can't adjust sound level, if i launch an app with sound, it crash and when i disconnect the bluetooth speaker, all go back normal..
I really don't know what to do, i don't have things like viper audio so i don't understand what happen
Thank you for reading, hoping to have your help
Change your rom