Database Users

[Q]guys,help me

Here is the situation,my gt540 using cmw 3.x,when i flashing a new rom throught it,i accident using the"apply update from sd card"instead of install zip from sd,so after that,i get stuck at the cm 7 logo boot loop,after that i format factory but from there to now,my fone auto shut down after 30-45' while i using it and turn off the screen,i can't turn it on until i remove the battery,so guys,anyone can help me???plz help me if u can(

kiengaynho said:
Here is the situation,my gt540 using cmw 3.x,when i flashing a new rom throught it,i accident using the"apply update from sd card"instead of install zip from sd,so after that,i get stuck at the cm 7 logo boot loop,after that i format factory but from there to now,my fone auto shut down after 30-45' while i using it and turn off the screen,i can't turn it on until i remove the battery,so guys,anyone can help me???plz help me if u can(
Click to expand...
Click to collapse
Erase boot and system clear data, cache ,dalvik cache and flash it the right way
Sent from my Optimus

That mean i must do fastboot?

kiengaynho said:
That mean i must do fastboot?
Click to expand...
Click to collapse
fastboot is one way or via recovery but not with flash uptdate but with choose zip from SD

I did that but it still happening

kiengaynho said:
I did that but it still happening
Click to expand...
Click to collapse
Try another ROM to see if its hardware related
Sent from my Optimus

try to flash 2.1 fastboot rom via kdz

hani93 said:
try to flash 2.1 fastboot rom via kdz
Click to expand...
Click to collapse
Too risky for me
Sent from my Optimus

black screen defy

My defy after didn't want to restore, i've tried various flashing with RSD lite, but my defy remain dead, i don't know what to do, i think it's dead..

orzata said:
My defy after didn't want to restore, i've tried various flashing with RSD lite, but my defy remain dead, i don't know what to do, i think it's dead..
Click to expand...
Click to collapse
Are you able to go to stock recovery? If yes, did you do a data/cache wipeafter flashing full SBF?!
Most imp: Please ensure you flash the correct SBF!

orzata said:
My defy after didn't want to restore, i've tried various flashing with RSD lite, but my defy remain dead, i don't know what to do, i think it's dead..
Click to expand...
Click to collapse
Just do hard reset. It will be OK.

flash the sbf for your bootloader

orzata said:
My defy after didn't want to restore, i've tried various flashing with RSD lite, but my defy remain dead, i don't know what to do, i think it's dead..
Click to expand...
Click to collapse
I just suggest what already was told, power off after power on and the led show blue press volume down, go to recovery, latest/stable and wipe cache then advanced and wipe dalvik cache, reboot
if does not help full wipe and try to flash a ROM again (after you installed to your SD card of course)

[Q] Defy+ not loading any rom.

(i read many threads relating my issue but they were not same, they was little difference in the problem. and i also tried there solutions but no improvement. so i decided to ask in a thread)
i was using defy+ with CM7 rom.
I installed this rom on my defy+
http://forum.xda-developers.com/showthread.php?t=2044797
first it booted and was working but after rebooting it resulted in boot loop .
( it shows Motorola sign then shows rom animation within few seconds is resumes rom animation and it keeps repeating animation.)
i waited for it an hour but is didn't go well.
then i tried restoring my old rom using CWM but i was unable to restore it is also resulted in same...
then i tried installing sdf using rsd but i have no improvement....
Now i can only go to bootloader version 09.1 and i says battery is low , can't program . i put the charger for whole night but i still says battery low can't program
can you please help me solving this problem

After installing that Rom you needed to enter boot menu and format data to ext4. Now, if you're unable to flash any sbf due to low battery then refer here: http://forum.xda-developers.com/showthread.php?t=892026
Or if you have access to another defy then use its battery and flash the sbf. Wipe data from stock recovery if you run into any issues after sbf flash
As stated below dalvik cache should be wiped, and data is automatically wiped when you format it to ext4 as stated above
Sent from my MB526 using xda premium

thekguy said:
After installing that Rom you needed to enter boot menu and format data to ext4. Now, if you're unable to flash any sbf due to low battery then refer here: http://forum.xda-developers.com/showthread.php?t=892026
Or if you have access to another defy then use its battery and flash the sbf. Wipe data from stock recovery of you run into any issues after sbf flash
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Or in other words you need to wipe data/cache and dalvik BEFORE and AFTER flashing the custom ROM (neagan or other). For now charge the battery and do the sbf flash. Pay attention at the "optional" indications. It better to do it.

CWM is missing
using your link i can solve the problem
but i dont have CWM so i cant wipe delvik data/cach
i only have bootloader
i only can go to bootloader and can't do any thing else. because CWM is removed.
tell me if you have any information about to do something using bootloader..

Do it from stock recovery, data wipe and cache wipe
Sent from my MB526 using xda premium

From stock recovery (bootloader) you will format as ext3 but is better to format in ext4 and that can be done from custom recovery. For that you have to install 2init and run it.

He's unable to boot...boot loop was before battery issue
Sent from my MB526 using xda premium

thekguy said:
He's unable to boot...
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Yes because of low battery. Software solution is ... after charging.

where is stock recovery??
how to boot in stock recovery??? sorry I dont know if there any stock recovery is existed...... ( i tried different buttons while Motorola sign but i got nothing except bootloader and download mod)
tell me i think i can do it using stock recovery
because there is no problem in bootloader. even i am able to flash new SDF.
it makes trouble in loading ROM....
what do you think?

battery is working now
thekguy said:
He's unable to boot...boot loop was before battery issue
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
i solved this problem using universal charger. i pulled off the battery and put in universal charger and charged it for two hours.

stock recovery?
now i just need to know how to boot in stock recovery???

AW: [Q] Defy+ not loading any rom.
There is a beginner guide anywhere in xda/defy sektion
You should read it
MB525 red lense

stock recovery?
i just need to now how to go into stock recovery?

How do I enter Recovery Mode?!: With the Phone off press VOLUME DOWN then, while still pressed, power up the phone and leave VOL key pressed until you see a Yellow triangle, once you see this you are in Recovery now press Vol Up and Vol Down at the same time (if you are in Froyo) and the menu will appear, if you are on Éclair the menu should appear without having to press anything.
copy/paste from this thread.

thanks
Thanks bros
I recovered my phone and i is running with CM7 and i am not gonna try CM10 again until it comes with all bug fixes..
thanks again for your help..

[Q] Another bricked Defy+

hey guys, i finally need some help with my phone before i'll totally destroy it.
i was on cm-10-20130709-NIGHTLY-mb526 and installed the newest blechdose kernel, 30.08 i think.
it worked pretty well until i had some very random freeze while using the browser.
rebooting turned into a bootloop, i tried to wipe cache and dalvik then, after another reboot it took me to this "optimizing apps" thing, where it stuck again on "starting apps".
i managed how to get into custom recovery and did a system wipe, i thought thats the same as factory reset, but it turned out that it wasnt..
so the situation now is, that the phone is stuck on the standard boot logo after turning on, i cannot get into custom recovery anymore, just stock recovery works.
whats the best workaround for this ?
thanks for helping!

Sbf flash is the only thing which will revive your phone
Sent from my MB526 using Tapatalk 2

thekguy said:
Sbf flash is the only thing which will revive your phone
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
how can i do that? via stock recovery or rsdlite?
i'm trying to get rsd lite to work right now

.jano said:
how can i do that? via stock recovery or rsdlite?
i'm trying to get rsd lite to work right now
Click to expand...
Click to collapse
You need to wipe data and cache through stock recovery and then flash sbf using rsdlite.

thanks for your help its working again

[Q] Milestone 2 Bootloop (I tried to flash CWM 6 via recovery mode)

Hi guys,
I have a Milestone 2 running unofficial JB 4.3 (chinese version), and I tried to flash the file CWM 6 Recovery (.zip) via recovery. The recovery original of this rom is Android system recovery <3e>. Now when I start the device stuck in a bootloop. I don´t know what to do, and my desktop don´t recognize my device, despite all new motorola drivers installed, is impossible to make any update via RSD Lite.
I need help, any suggestion?

when you say that your desktop doesn't recognize the phone, did you put it in flash mode then?
you have to press the up button on the keyboard and the power button together to enter that mode. the phone should show you the bootloader version and some other stuff.
now you can connect it to your desktop computer and it should show as motorola flash interface in the device manager. then you can flash with rsdlite.
that said I had to do the whole procedure recently aswell. on my primary workstation rsdlite didn't recognize my ms2 at all (despite having proper drivers installed and despite it showing correctly in the device manager). so I tried it with a windows xp vm on my macbook pro and there it did work.

503e2 said:
when you say that your desktop doesn't recognize the phone, did you put it in flash mode then?
you have to press the up button on the keyboard and the power button together to enter that mode. the phone should show you the bootloader version and some other stuff.
now you can connect it to your desktop computer and it should show as motorola flash interface in the device manager. then you can flash with rsdlite.
that said I had to do the whole procedure recently aswell. on my primary workstation rsdlite didn't recognize my ms2 at all (despite having proper drivers installed and despite it showing correctly in the device manager). so I tried it with a windows xp vm on my macbook pro and there it did work.
Click to expand...
Click to collapse
No, I don´t do that, I put in the recovery mode only. I didn´t know how to enter in bootloader, now I know that, thnks! :good:
Is wrong and risky flash the cwm6 via recovery, the right is always flash via RSD Lite right?
Supposing, through this procedure that you recommend me and the RSD Lite recognizing my device...
What file I flash to solve the problem?

you can download a sbf for your phone (depending on your region) from here: sbf.droid-developers.org/umts_milestone2/list.php
after you flashed the sbf you have to boot into recovery and wipe data.
you will be back to a factory reset stock rom after that!
it might be possible to rescue your current rom/data but with that I can't help you. I don't know how to get cwm6 either.
the way I went was: gingerbread stock via rsdlite -> CM10 from tezet via the method described by tezet -> CM10.2 from Engle_Mars via the cwm recovery from tezets CM10 rom

503e2 said:
you can download a sbf for your phone (depending on your region) from here: sbf.droid-developers.org/umts_milestone2/list.php
after you flashed the sbf you have to boot into recovery and wipe data.
you will be back to a factory reset stock rom after that!
it might be possible to rescue your current rom/data but with that I can't help you. I don't know how to get cwm6 either.
the way I went was: gingerbread stock via rsdlite -> CM10 from tezet via the method described by tezet -> CM10.2 from Engle_Mars via the cwm recovery from tezets CM10 rom
Click to expand...
Click to collapse
Now, before I did the procedure to flash the rom, I start the Milestone 2 in the Bootloader mode as
recommended you.I noticed the battery´s device is discharched, and I don´t have other battery to replace.
Remembering my recovery don´t have any battery charge options.
There is one way to charge the battery or solution, without use the recovery mode or buy another battery?

mah9800 said:
Now, before I did the procedure to flash the rom, I start the Milestone 2 in the Bootloader mode as
recommended you.I noticed the battery´s device is discharched, and I don´t have other battery to replace.
Remembering my recovery don´t have any battery charge options.
There is one way to charge the battery or solution, without use the recovery mode or buy another battery?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=892026
Only do this for a short period of time, else your battery could damage.
Flash something, then wipe data in stock recovery, and try to boot your device.
Good luck

mah9800 said:
Now, before I did the procedure to flash the rom, I start the Milestone 2 in the Bootloader mode as
recommended you.I noticed the battery´s device is discharched, and I don´t have other battery to replace.
Remembering my recovery don´t have any battery charge options.
There is one way to charge the battery or solution, without use the recovery mode or buy another battery?
Click to expand...
Click to collapse
Try to get a universal battery charger.

Lean946 said:
http://forum.xda-developers.com/showthread.php?t=892026
Only do this for a short period of time, else your battery could damage.
Flash something, then wipe data in stock recovery, and try to boot your device.
Good luck
Click to expand...
Click to collapse
Thanks a lot dude, I´ll try it!