Related
Searched but can't find an answer.
How does every one else dealing with this situation? Is there a work around to make the remote button work with different Android builds?
Would it work if I use a matching OEM headset? For example, get the OEM EVO headset to use with EVO based build?
what is it ur specifically trying to do
hey what is it u wanna do bc I have the desire build and I use the headphones that came with my hd2 to control my music thats about it u can do with it and u know the basic use it to talk and what not but even than u have to have winamp installed on ur phone which u can get from the android market for free or it also works as a music controller on the htc music on android idk if it works for the other builds tho, hope this helps
Try the headphone come with iphone, it,s work!
silvscorp said:
How does every one else dealing with this situation? Is there a work around to make the remote button work with different Android builds?
Click to expand...
Click to collapse
What are you talking about? Headsets have been working properly almost since the start of Android porting.
Fedr0 said:
What are you talking about? Headsets have been working properly almost since the start of Android porting.
Click to expand...
Click to collapse
I think he means for controlling music. It may be a non-sense build issue. My original HD2 headset buttons don't work for skip forward, back or play/pause. This is on Bangsters V1.5. My bluetooth headset does work for these functions though. When I used desire builds the headset buttons would work, but only if the screen was on.
trmacdonal said:
I think he means for controlling music. It may be a non-sense build issue.
Click to expand...
Click to collapse
That's strange, I've never had that problem and I never use Sense builds. This with the screen either on or off, it doesn't make any difference.
Anyone solved this problem after NAND builds were released?
Somehow I managed to get my headset working just after flashing new build, but next morning I found no music control from headset whatsoever. Really annoying this is because I use them a lot when I go to work or enywhere else :/
npocmo said:
Anyone solved this problem after NAND builds were released?
Somehow I managed to get my headset working just after flashing new build, but next morning I found no music control from headset whatsoever. Really annoying this is because I use them a lot when I go to work or enywhere else :/
Click to expand...
Click to collapse
yes me too and I have found any solution the call/answer button enable only Voice Recognition and the (next/back) button enable nothing
@npocmo: I think that dosent work with the desire HD build portage. Did you tried with a nand Desire ?
i flashed MDJ's CyanogenMod 7 v. 2.6 [A2SD+][GRH78C][RMNET][Kernel: MDJ S10.4 OC] and face the same problem.
is there any solution?
wow this thread is so old !! has anyone found the solution ? i flashed [Feb 02][DL DesireZ v3.4][DL Data2SD/Ext4 v2.7][Nand/SD/MAGLAR] yesterday and have the same problem, the remote doesn't do anything other than make the music player go crazy. solution please ? should i try with another android build ?
I have the same problem with this build!
actually these devs were saying that it was infact gingerbread who wasnt supporting the headset controls.. but now most of them do.. only thing you can do is thoroughly search the build thread to make sure that they work before flasshing them unto your phone so you know exactly what your getting into
Try changing kernel to gauner
Yes, the problem on kernel mdj.If you change kernel on to gauner it will works.
soberlam said:
i flashed MDJ's CyanogenMod 7 v. 2.6 [A2SD+][GRH78C][RMNET][Kernel: MDJ S10.4 OC] and face the same problem.
is there any solution?
Click to expand...
Click to collapse
I changed the kernel and it working
Can someone explain how to fix it? I did not understand..
I have on my Leo's -= MDJ CyanogenMod 7 v. 2.6 [+ A2SD] [GRH78C] [RMNET] [Kernel: MDJ S10.4 OC]. Excuse my English but I'm Italian
Anyone can help me?
mylove299 said:
I changed the kernel and it working
Click to expand...
Click to collapse
so can i use NAND MDJ but use gauner kernel ?
How do I change only the kernel? without losing data?
where can i get gauners kernel please
Would anyone be so kind as to point me to an NAND build of Android 2.2 or 2.3 that has consistently working BT Music Streaming?
I am currently using 1/12/11 Blue Topia (love the build BTW) but the one thing I REALLY want does not seem to be working for me...
Funny it worked for 3 days on the older release, then stopped connecting.
Any help would be appreciated!!
Anyone else running this and having issues with BT?
Blue tooth enables fine, but will not detect any of my BT devices.
i know its just a beta, but it says BT is working.
i would post this in the CM7 forum, but not enough posts in general to be able too.
I had an issue with it accepting the pin codes. You have to type it fast!!! took me at least 10 attempts to get it to pair but it works just fine once the codes in.
mpgrimes said:
Anyone else running this and having issues with BT?
Blue tooth enables fine, but will not detect any of my BT devices.
i know its just a beta, but it says BT is working.
i would post this in the CM7 forum, but not enough posts in general to be able too.
Click to expand...
Click to collapse
Hi I dont you use bluetooth but you can forward this in the development section on this forum there is a cm7 beta 3 thread
http://forum.xda-developers.com/showthread.php?t=929666
or better still try Elelinux's rom base on cm 7 which I am currently using ... Just love it
http://forum.xda-developers.com/showthread.php?t=932377
its working fine now, for some reason the phone wouldnt detect any BT device (want trying to detect the phone with other devices) , but i thought what the hell, i enabled the discoverable option, and it started picking up other devices, even now that discoverable is turned off its working fine.
dont know if it was that, but thats the only thing different i did, and now it works.
tfn said:
Hi I dont you use bluetooth but you can forward this in the development section on this forum there is a cm7 beta 3 thread
http://forum.xda-developers.com/showthread.php?t=929666
or better still try Elelinux's rom base on cm 7 which I am currently using ... Just love it
http://forum.xda-developers.com/showthread.php?t=932377
Click to expand...
Click to collapse
I don't know which one is better, any suggestions between 2 ROM there?
I've never seen a dedicated thread on this but I've seen people make off-hand comments about this issue from time to time. I think it started happening in Tytung R9 and higher kernels.
I am using a BlueAnt T1 Bluetooth headset. It pairs just fine and I can use it generally without any issue.
The problem comes when I use voice dialing to initialize a call from the Bluetooth headset. It connects to the phone and I get the normal Android "Speak now...." I speak my command "Call <person> on <service>...." It states the command back like normal and then _as soon as_ it switches to the phone app (eg, com.android.phone process) it locks up the phone and the only way to recover is to pull the battery.
If, instead, I go to the phone app, find the person, and call them that way (even with Bluetooth paired) it _always_ works without any problems. This isn't a long-term solution for me because I need to use voice dialing when I'm in my car.
Now that GPS looks to be fixed and CLK data over PPP is much more stable, this Bluetooth issue is the last thing standing between me and treating the HD2 as my full-time native Android phone (currently I tinker on the HD2 but use my Nexus One as my daily driver).
I've tried multiple different ROMs, from HyperDroid-CM7, HyperDroid-GBX, Typhoon CM7, and Nexus-HD2-Gingerbread. They all have the same issue though Nexus-HD2 appears to be worse than the others (that is, the problem happens more often there).
I've used the infamous audio.conf update as well as the various no-wonk and libaudio patches and none of them help this issue.
Anyone else experienced this and have any feedback on how you overcame it?
I have the same kind of problem and tried a lot of different ROMs - not help.
I tried Blueant ST3, Motorola t305.
Phone book copied to blueant very well, but voice dial has same simptoms like yours - even if phone does't hang sound goes away from phone permanently(needs reboot). Is there any other ROM which works well with bluetooth hadsfree?
Any one?
P.S. Looks like it is real problem, but non of developers pay attention to it - they just don't have handsfree maybe
Ι think that sense roms doesnt have this issue.But unfortunatelly they have other issues...
clio94 said:
Ι think that sense roms doesnt have this issue.But unfortunatelly they have other issues...
Click to expand...
Click to collapse
I've not actually tried a SENSE-based ROM but I understand from my research that they don't have the BT issue. Maybe it's possible to look into their architecture to understand what is different.
I expect that it's something in the kernel....
This is a very common issue. if it helps, BTvoice command works Fine in Froyo.. at least CM6 (I tested).
svet-am said:
I've not actually tried a SENSE-based ROM but I understand from my research that they don't have the BT issue. Maybe it's possible to look into their architecture to understand what is different.
I expect that it's something in the kernel....
Click to expand...
Click to collapse
I think it is not the kernel, same kernel will crash in CM7 but no in CM6. I think the problem is related to the libaudio.so and other libs in system/lib.
robrob777 said:
This is a very common issue. if it helps, BTvoice command works Fine in Froyo.. at least CM6 (I tested).
Click to expand...
Click to collapse
are the Froyo-based builds still being maintained. I ask that from the perspective of "could I just use a Froyo build as my daily driver instead?"
svet-am said:
are the Froyo-based builds still being maintained. I ask that from the perspective of "could I just use a Froyo build as my daily driver instead?"
Click to expand...
Click to collapse
I'm using it as my daily driver (CM6), I came back just bc of the calling issues in Gingerbread.
the build that I'm using has not been updated since Jan 7, however I applied around 10+ patches and now it works as good as the new builds.
I just tested again voice command.
No problems
During the voice command call I can switch from BT to speaker to audio piece, back to BT etc, no problems. Audio doesn't crash after call.
And no 60ma battery drain. it is around 5ma after the call with BT on.
robrob777 said:
I just tested again voice command.
No problems
During the voice command call I can switch from BT to speaker to audio piece, back to BT etc, no problems. Audio doesn't crash after call.
And no 60ma battery drain. it is around 5ma after the call with BT on.
Click to expand...
Click to collapse
just for clarity for other folks reading this thread, I assume that you're talking about a Froyo-based ROM.
i just verified the problem exists in MIUI as well. I tested MIUI since it's allegedly a "clean room" type of build environment.
svet-am said:
just for clarity for other folks reading this thread, I assume that you're talking about a Froyo-based ROM.
Click to expand...
Click to collapse
Yes, I tested successfully in a Froyo based ROM.
I went back for a moment to CM7 and tested...sound couldn't return to the phone after calling with BT, also during the call I was not able to switch to speaker phone like I do in the froyo based ROM.
Tested with Tytung 1.9G Froyo - BT works just fine in all ways. Just need to keep GPS off(when not used) to avoid 60 ma current draw.
Tytung says BT Voice dail is just GBread problem.
zcdg said:
Tested with Tytung 1.9G Froyo - BT works just fine in all ways. Just need to keep GPS off(when not used) to avoid 60 ma current draw.
Tytung says BT Voice dail is just GBread problem.
Click to expand...
Click to collapse
It works fine on my Nexus One on Gingerbread, so I don't see how it can be a "gingerbread problem." If it was a "gingerbread problem" other devices would be seeing this as well.
svet-am said:
It works fine on my Nexus One on Gingerbread, so I don't see how it can be a "gingerbread problem." If it was a "gingerbread problem" other devices would be seeing this as well.
Click to expand...
Click to collapse
Yes you are right. It is just what Tytung said(i asked in his thread). Probably he meant GB for HD2....Soon or later they will figure it out i think...
For now will use Froyo 1.9G....
tytung said:
I don't have any Bluetooth headset.
AFAIK, some people have the sound issues, e.g. causing the phone app FC, since using Gingerbread 2.3.4.
But it doesn't affect all people, I don't know why.
No solution so far. To use Gingerbread 2.3.3 instead if you are one of them.
Click to expand...
Click to collapse
I finally found Tytung's exact quote as to why he won't look into the issue. It can be seen in context over here: http://forum.xda-developers.com/showthread.php?t=905060&page=524#
So, it might not be Froyo that's the fix but rather older versions of Gingerbread as well.
i have found a workaround fix for this bug.I tried it in tytung`s v2.9 rom and in dorimanx cm7 light rom with driztee v2 libaudio file.For bt voice commands i am using cyberon voice commander because google app doesnt support yet greek language
i connect my bt headset (motorola h300) and then i use super bt mono froyo free app https://market.android.com/details?id=com.steven.supermonofroyofree&feature=search_result to send audio to bt headset.
After pushing the bt headset button cyberon voice starts and i can give the command i want.After giving the command, audio goes back to the phone (you will hear a beep from phone speaker).The weird thing is that the audio is in extremely low level for hearing music but when you receive a call it is in normal level.
If i close super bt mono froyo app,audio returns to phone in normal level.
But if i accidentally (after i close the app) push the button for voice bt command,audio will disappear.
If the app is on and you receive a call,all audio will go again to bt headset and to return it to phone speaker after end call, i push bt headset,cyberon voice starts and i dont give any comand.After cyberon ends,audio goes back to phone with low level for media hearing.
Sure this isnt the perfect solution,but the important thing for me is that with this way,audio is not go away and i can give bt voice commands.
Also i tried bt mono app http://forum.xda-developers.com/showthread.php?t=950472 and it have a little different behaviour.I cant start from bt headset cyberon voice comander,but only from the phone and after giving a command,audio returns to bt headset if you have enable the setting "restart after call".So i think it maybe be helpful to people who want to have audio all time in a bt carkit.
Tested all 2.3.3 from Tytung - last working with r8.3 kernel. r9 and up not working.
So NexusHD2 v2.5 NAND(GB 2.3.3) with r8.3 latest working with BT voice dial ROM.
zcdg said:
Tested all 2.3.3 from Tytung - last working with r8.3 kernel. r9 and up not working.
So NexusHD2 v2.5 NAND(GB 2.3.3) with r8.3 latest working with BT voice dial ROM.
Click to expand...
Click to collapse
thanks for that follow-up and testing. I was wondering if whether or not it might be a "fault" in the VoiceDialer.apk or even in the Phone.apk. I have been using my Nexus One for daily stuff. I might try replacing VoiceDialer and/or Phone.apk in a newer ROM (eg AOSP 2.3.5 or so) with the old version and see if it works.
Ive wondered about this as it is to me the last issue I have with my HD2. Here is a search link for some entries in Tytungs rom & kernal thread...
http://forum.xda-developers.com/search.php?searchid=86308155
Also here is a comment from the man himself...
http://forum.xda-developers.com/showpost.php?p=15996942&postcount=5953
and here is a post in reply that talks about the same issue being replicated using Bluetooth...
http://forum.xda-developers.com/showpost.php?p=15997234&postcount=5956
Some more chat about the sound issues...
http://forum.xda-developers.com/showpost.php?p=16113973&postcount=6045
Another thread with logcats on it...
http://forum.xda-developers.com/showthread.php?t=1060486
I've read around, and multiple people are having this issue, without any real solution. Does anyone know of a rom with which bluetooth is stable (or do I have a hardware issue?)
When Bluetooth is connected to any handsfree car system , it cuts out for a few seconds before reconnecting. For example, If I am in a call, it will revert to the built in earpiece & disconnect from the car , only to reconnect seconds later. Same of Bluetooth audio (a2dp). It's fairly disjointed.
I've tried both stock android 4.4.4 & the lastest Cyanogenmod snapshot & nightlies.
Thanks for any help, and I will post back if I find anything useful.
Never happened to me, I've connected with jawbone FM music transmitter, and with several other Bluetooth peripherals including headphones, my smartwatch, and a mono headset and not experienced this. Maybe its a problem with the specific car your trying to connect to? My BMW 750li doesn't pair with the nexus 4, and even a bb z10
Edit: if multiple people are reporting this and multiple hands free car systems don't work then maybe is a hardware issue? Which revision nexus you have ?
Blazing angel said:
I've read around, and multiple people are having this issue, without any real solution. Does anyone know of a rom with which bluetooth is stable (or do I have a hardware issue?)
When Bluetooth is connected to any handsfree car system , it cuts out for a few seconds before reconnecting. For example, If I am in a call, it will revert to the built in earpiece & disconnect from the car , only to reconnect seconds later. Same of Bluetooth audio (a2dp). It's fairly disjointed.
I've tried both stock android 4.4.4 & the lastest Cyanogenmod snapshot & nightlies.
Thanks for any help, and I will post back if I find anything useful.
Click to expand...
Click to collapse
I suspect people are experiencing different issues, since no 2 cases appear to be the same. As for me, I have a 2008 Audi with integrated BT which worked fine with Gingerbread. 4.+ has been very different: the connection would often be lost and regained mid-trip and worst of all, 9 times out of 10 I couldn't initiate or terminate calls from the car. That last point is a deal-breaker for me...
Some early KK builds were fine, in fact I used Purity till March. Then a new build came along which returned the above issues. Since then I have tried virtually all the popular ROMs (I would create a Nandroid backup and reflash after a day or so - I still try new builds), and at least for me the AOSP ROMs all have the same issue, above.
I am currently using AICP ROM which is AOKP, nightlies are installed OTA and I don't have a single issue with the car BT any more. And it's a very stable ROM, I´ve been using the ROM for about 4 months I think.
Your mileage may vary, since I suspect we all have different issues, but the AOKP branch works for me. Dirty Unicorns works fo rme too.
BassBlaster said:
Never happened to me, I've connected with jawbone FM music transmitter, and with several other Bluetooth peripherals including headphones, my smartwatch, and a mono headset and not experienced this. Maybe its a problem with the specific car your trying to connect to? My BMW 750li doesn't pair with the nexus 4, and even a bb z10
Edit: if multiple people are reporting this and multiple hands free car systems don't work then maybe is a hardware issue? Which revision nexus you have ?
Click to expand...
Click to collapse
It is a rev_11
paul c said:
I suspect people are experiencing different issues, since no 2 cases appear to be the same. As for me, I have a 2008 Audi with integrated BT which worked fine with Gingerbread. 4.+ has been very different: the connection would often be lost and regained mid-trip and worst of all, 9 times out of 10 I couldn't initiate or terminate calls from the car. That last point is a deal-breaker for me...
Some early KK builds were fine, in fact I used Purity till March. Then a new build came along which returned the above issues. Since then I have tried virtually all the popular ROMs (I would create a Nandroid backup and reflash after a day or so - I still try new builds), and at least for me the AOSP ROMs all have the same issue, above.
I am currently using AICP ROM which is AOKP, nightlies are installed OTA and I don't have a single issue with the car BT any more. And it's a very stable ROM, I´ve been using the ROM for about 4 months I think.
Your mileage may vary, since I suspect we all have different issues, but the AOKP branch works for me. Dirty Unicorns works fo rme too.
Click to expand...
Click to collapse
Thanks for the responses. The cars work perfectly fine with galaxy phones & iphones, the issues lies with my nexus sadly. I will try the posted roms later on and update!
Also Paul, can you post a link to the rom you have installed? I've been out of the loop for a while and cannot find it !
Mine is also a rev11, 303k. I guess that rules out hardware issue
Blazing angel said:
It is a rev_11
Thanks for the responses. The cars work perfectly fine with galaxy phones & iphones, the issues lies with my nexus sadly. I will try the posted roms later on and update!
Also Paul, can you post a link to the rom you have installed? I've been out of the loop for a while and cannot find it !
Click to expand...
Click to collapse
Here you go: http://forum.xda-developers.com/nexus-4/orig-development/rom-aicp-3-5-kk-4-4-2r2-mako-t2632777 - enjoy!
This is the official download page, where you can get the gapps package you prefer, plus the release/latest nightly.
If you install the release you won't get the nightly updates. The nightlies are very stable, so I'd recommend the latest nightly.
I'm experiencing exactly the same problems than Blazing angel.
Bluetooth is unusable in my car, "Unfortunately, the process com.android.bluetooth has stopped" being displayed repetitively.
I suspect it's not hardware related as I do not have problem using the stock or paranoid ROMs. Unfortunately, my favorite ROMs (AOKP, CN or Carbon) are causing problems.
Do you think it's possible to pickeup some files in the paranoid files and inject them to Carbon to solve the problem ?
Thanks in advance for your help !
paul c said:
Here you go: http://forum.xda-developers.com/nexus-4/orig-development/rom-aicp-3-5-kk-4-4-2r2-mako-t2632777 - enjoy!
This is the official download page, where you can get the gapps package you prefer, plus the release/latest nightly.
If you install the release you won't get the nightly updates. The nightlies are very stable, so I'd recommend the latest nightly.
Click to expand...
Click to collapse
Great ! I was able to bypass my bluetooth problem using this Android 4.4.4 rom, without loosing great features of Carbon or Pac-ROM ! :victory:
Thanks for sharing this ROM Paul ! :good: