Related
Hello,
I had just recently rooted and flashed my nook with cyanogenMod 7 and installed gapps zip file. Now at various times I get "android.process stop" any ideas on how to get this to stop?
Thank you
munchy09 said:
Hello,
I had just recently rooted and flashed my nook with cyanogenMod 7 and installed gapps zip file. Now at various times I get "android.process stop" any ideas on how to get this to stop?
Thank you
Click to expand...
Click to collapse
Please let us know what versions of each you installed. It is important to figure out what might be causing the issue. Also, if it is the first time you have done this, and you haven't spent much time personalizing, I would just flash again to see if it resolves the issue.
rnclock said:
Please let us know what versions of each you installed. It is important to figure out what might be causing the issue. Also, if it is the first time you have done this, and you haven't spent much time personalizing, I would just flash again to see if it resolves the issue.
Click to expand...
Click to collapse
Go in to recovery wipe all but EMMC. Dont touch it. After a full proper wipe reflash. If you dont proper wipe you get klingons some times. Lol
I'm all thumb's
I have cyanogenMod=7.1.0-encore and gapps-ics-20120317-signed
rnclock said:
Please let us know what versions of each you installed. It is important to figure out what might be causing the issue. Also, if it is the first time you have done this, and you haven't spent much time personalizing, I would just flash again to see if it resolves the issue.
Click to expand...
Click to collapse
munchy09 said:
I have cyanogenMod=7.1.0-encore and gapps-ics-20120317-signed
Click to expand...
Click to collapse
Please download and install (flash zip from CWM) from here http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip.
You have the ICS(CM9) version of gapps for the CM7 version.
I've downloaded that version of gapps and still had the same issue.
munchy09 said:
I've downloaded that version of gapps and still had the same issue.
Click to expand...
Click to collapse
I would do what Hal suggested "Go in to recovery wipe all but EMMC. Dont touch it. After a full proper wipe reflash. If you dont proper wipe you get klingons some times."
Then flash the gapps version recommended in above post. If you are still experiencing issues, then start from scratch, make sure to wipe all caches (don't touch EMMC) and use only the gapps mentioned here.
So what is EMMC? Is that the primary operating system?
munchy09 said:
So what is EMMC? Is that the primary operating system?
Click to expand...
Click to collapse
EMMC is the main partition for the Nook <where the main system resides>. When I clear up my system I 'wipe' "cache partition" and Advance> Wipe Dalvik cache. You access these from the CWM recovery.
rnclock said:
EMMC is the main partition for the Nook <where the main system resides>. When I clear up my system I 'wipe' "cache partition" and Advance> Wipe Dalvik cache. You access these from the CWM recovery.
Click to expand...
Click to collapse
I wipe /system, /data, /cache, and dalvik-cache. Then flash the new ROM. I would also suggest giving CM7.2 a try instead of 7.1 along with the gapps mentioned previously. Wiping /system is actually an important step for getting everything settled correctly,
I completed the steps that you recommended and install the gapps that you suggested and did all the wipes. As soon as I restarted the nook this is what I got "Sorry! The process android.process.media has stopped unexpectedly. Please try again. Force close"
Have you tried Mirage cm 7.2 yet?
I'm all thumb's
no where can I get that at? and is a image file like 7.1 encore?
munchy09 said:
no where can I get that at? and is a image file like 7.1 encore?
Click to expand...
Click to collapse
OP of this thread: http://forum.xda-developers.com/showthread.php?t=1344873
Scroll down to downloads. This is a very stable and usable ROM. Hope this helps.
Thanks for helping me out everyone with this I greatly appreciate it. Something else I am looking at now, is there a way to convert a java file (jar) into an android file (apk)? I ask this because I have found an app call andro lite what it does is it allows you to use your android as a keyboard, mouse, and others input devices with your computer but you have to download the server file which is a jar file. I'm think if it is possible to do this then I can have the jar file on my nook and use my droid phone as the input device.
Thanks in advance for the help and advice.
I use a VNC client app for that sort of thing. Valence acts as keyboard and mouse via VNC and lets me run demos while walking around the room.
VNC servers are available or even supplied for most OS's.
Sent from my NookColor using xda premium
So I looked them up in the play store and from understanding of that it is more for android controlling windows. I'm looking for android to android type. I want to be able to use the keyboard from my droid 4 (whether physcial or virtual) to type in or operate on my nook.
Sent from my DROID4 using xda app-developers app
Please PM Divine and have him move this thread to Q&A. This has NOTHING to do with development.
Sent from my Galaxy Nexus using xda app-developers app
This does have relate to development, how do we develope the ability to connect one droid to another droid so as to have multiple user interfaces.
Sent from my DROID4 using xda app-developers app
munchy09 said:
This does have relate to development, how do we develope the ability to connect one droid to another droid so as to have multiple user interfaces.
Click to expand...
Click to collapse
I don't think you understand the differences between asking a question and development. This place is for posting a ROM. Check Q&A and post there. PM a mod and have them move this to the correct section.
Sent from my SGH-T989 using xda app-developers app
Greetings all. I am trying to get everything together to root my wife's Nook Color, but am somewhat confused and have a couple of questions. First, she got this from her mother. Is there any way to back up what books are already on there before rooting and flashing a new ROM? Also do I need to do a factory reset / complete wipe before I root and install a custom ROM? Once I do root this, we will be able to get back to her account and re-download the her books, right? Currently the account settings show her mom's name and email address, even though the wife says she updated the account to her Gmail Does her mom need to de-register this before I proceed?
I'm having trouble getting the SD card to work right, I think. I have a SanDisk 8GB card with a USB Card Reader. After writing a boot image using Win32DiskImager to the card from this link I removed the SD Card briefly, then re-inserted it to the USB Reader. Upon doing so, Windows gives me the message that I must first format the card for it to be readable. Why?
After I get this to work, I can follow along with the steps outlined in the ManualNooter thread and be rooted, right? By doing the MN this will only root the device, not install a ROM, right? I have to find whatever ROM I want to use (CM10, I suppose) and the correct gapps, boot to recovery, then install, right? Thanks for the help and info all.
ETA: I'm in the process right now of formatting the SD Card using SDFormatter and will try to write the boot image again and see what happens.
ETA 2: Ok, I got the image file on the boot card, but I guess it's for a 1 GB SD card. Where the hell do I find one for an 8 GB card? After writing, Windows says I have 193 MB free of 203 MB. Is that my problem?
ETA 3: Ok, I was able to find 8gb_clockwork-3.2.0.1.img. Writing that to the SD card now.
ETA 4: Got it rooted. So am I now on the "stock" B&N Android with limited functionality? I think I want to install a custom rom on the internal memory and will follow the link in post 2. I set this up with my Gmail and got a few apps installed to play with. How do I now remove all of that and start from a fresh root so my wife can get it set up with her Gmail? How do I simply remove an app I no longer want? Also, The Amazon App Store will not download apps. When I go to "My Apps" from the menu I can see the apps I have in the Cloud but when I try to download anything I get a full bar and it says "Downloading..." and switches back and forth to "Download Pasued" but it doesn't actually download anything. Any ideas?
Re: [Q] [MN5] SD Card problems and rooting questions
Couple of answers - yes you will still have access to books thru the Nook app.
Yes, deregister the Nook and register it in your wife's name.
Yes, manual nooter only roots the device. You need to go further to add roms.
What method are you using to root /rom the nook? There are excellent instructions by eyeballer right at the beginning of the general section here that have never failed me.
http://forum.xda-developers.com/showthread.php?t=1030227
Post if you have more questions
Sent from my SGH-T999 using xda premium
k8108 said:
Couple of answers - yes you will still have access to books thru the Nook app.
Yes, deregister the Nook and register it in your wife's name.
What method are you using to root /rom the book? There are excellent instructions by eyeballer right at the beginning of the general section here that have never failed me.
http://forum.xda-developers.com/showthread.php?t=1030227
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Thanks, K. I did manage to get it rooted finally. So I've managed to get a couple apps installed and working. I signed in with my Gmail account to play with it. How do I remove that and add my wife's account now? How do I uninstall apps? The Amazon App Store will not download apps. When I go to "My Apps" from the menu I can see the apps I have in the Cloud but when I try to download anything I get a full bar and it says "Downloading..." and switches back and forth to "Download Pasued" but it doesn't actually download anything. Any ideas?
Re: [Q] [MN5] SD Card problems and rooting questions
Are you just rooted or running a rom? I have never had this problem, personally. To change Google accounts, go to settings then accounts. Add your wife's account and then delete yours.
Sent from my SGH-T999 using xda premium
---------- Post added at 11:40 AM ---------- Previous post was at 11:38 AM ----------
To remove apps, go to settings, manage applications. Click on the app, hit uninstall
Sent from my SGH-T999 using xda premium
k8108 said:
Are you just rooted or running a rom? I have never had this problem, personally. To change Google accounts, go to settings then accounts. Add your wife's account and then delete yours.
Sent from my SGH-T999 using xda premium
---------- Post added at 11:40 AM ---------- Previous post was at 11:38 AM ----------
To remove apps, go to settings, manage applications. Click on the app, hit uninstall
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I'm just rooted, no ROM yet. I do not have a "Manage Applications" within settings. Settings takes me to what looks like the stock B&N Settings.
Okay. I'm sorry I haven't used stock rooted rom for almost 3 years. Hopefully someone else here can help you with that. Or try googling your question and see what comes up.
Sent from my SGH-T999 using xda premium
k8108 said:
Okay. I'm sorry I haven't used stock rooted rom for almost 3 years. Hopefully someone else here can help you with that. Or try googling your question and see what comes up.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Looks like this might be my issue. I need an SD card in the Nook to download stuff to.
What's the best way to go about cleaning this thing up totally and doing a clean root? If I boot into recovery and wipe data, will it wipe out the B&N stuff, or just the apps and such from the root? Can I then re-apply the MN root and follow that up with a ROM?
Since you already have 3.0.2.1, I would suggest you go to this thread and look at for the link at the end of the post where it says, "Want nightly builds, look here" The latest build is really sound and running well on my nook. Look in the 2nd post for the correct link for the gapps (google apps). Download both of those and put them on your sd card with 3.0.2.1
Go back to the link I gave you earlier (eyeballer's thread) and follow instructions. This will completely wipe the nook, wipe off your account, wipe everything. You will be starting from scratch on a new ROM. I'm off to work, but will check back later.
k8108 said:
Since you already have 3.0.2.1, I would suggest you go to this thread and look at for the link at the end of the post where it says, "Want nightly builds, look here" The latest build is really sound and running well on my nook. Look in the 2nd post for the correct link for the gapps (google apps). Download both of those and put them on your sd card with 3.0.2.1
Go back to the link I gave you earlier (eyeballer's thread) and follow instructions. This will completely wipe the nook, wipe off your account, wipe everything. You will be starting from scratch on a new ROM. I'm off to work, but will check back later.
Click to expand...
Click to collapse
Got everything wiped, rooted, and installed. Running CM10 nightly from 24 Feb and it's running great. Thanks for the help!
I would love to be able to sideload applications after 2.1.0 update. Root is working fine.
Royaltiger said:
I would love to be able to sideload applications after 2.1.0 update. Root is working fine.
Click to expand...
Click to collapse
You can if you flash my extras zip.
Sent from my rooted stock Nook HD
You are DA MAN!
parsing problem
Royaltiger said:
You are DA MAN!
Click to expand...
Click to collapse
I have installed the extras zip and was able to install amazon app store. I still cannot sideload many apps and get the 'there is a problem parsing the package' message. Basically, I downloaded the apk and used package installer and got this message.
Thanks for your help
PeeAm
peeam said:
I have installed the extras zip and was able to install amazon app store. I still cannot sideload many apps and get the 'there is a problem parsing the package' message. Basically, I downloaded the apk and used package installer and got this message.
Thanks for your help
PeeAm
Click to expand...
Click to collapse
Do you think rooting the tablet will help you?
Flashing to allow unknown sources via the image disk worked great for me. Adobe Flash and all my other non market installed apps working great. I did not root.
Edit:
Changed post from permissions to unknown sources.
rushless said:
Flashing permissions via the image disk worked great for me. Adobe Flash and all my other non market installed apps working great. I did not root.
Click to expand...
Click to collapse
Can you please elaborate on "Flashing permissions via the image disk". Which file to flash? Can you please link to the thread that has this file.
Thanks!
fljoe said:
Can you please elaborate on "Flashing permissions via the image disk". Which file to flash? Can you please link to the thread that has this file.
Thanks!
Click to expand...
Click to collapse
It is not a file to flash, his terminology is a little off. He means going to CWM and the advanced menu and choose 'fix permissions'.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
It is not a file to flash, his terminology is a little off. He means going to CWM and the advanced menu and choose 'fix permissions'.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
I tried 'fix permissions' but no success. I am trying to install widely used apps from travel sites like Orbitz and Travelocity which are installed on my samsung 7+ tab running ICS. It must have something to do with stock as they were installed on CM 10 on nook hd+. While I prefer stock due to the excellent sleep option and battery life, I may have to go back to CM 10.
PeeAm
leapinlar said:
It is not a file to flash, his terminology is a little off. He means going to CWM and the advanced menu and choose 'fix permissions'.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
It probably is a terminology issue, but what I did was:
1. Create the image with a micro sd.
2. Drap the Rev3 zip to the sd
3. Shut off the Nook
4. Insert the sd into the Nook and then turned it on
5. Went to the option to flash via the sd card with volume and pressed home key
6. Chose the Rev3 zip and pressed home. The files installed,
7. Removed the sd
8. Restarted..... Hung on the Nook screen for ten minutes, so held power to turn off
9. Restarted
10. Was able to side load all of my apps that needed it after that. I started with Adobe Flash which works GREAT with Dolphin, Opera and Xscope (had to side load Xscope, since could not install via market).
I do not recall flagging permissions in the image menu. I thought the flash process did all that, which it apparently did for me.
Side loaded Flash, Oid emulators, aFBA, Xscope and some market games as well that could be saved with an unrooted back-up app.
peeam said:
I tried 'fix permissions' but no success. I am trying to install widely used apps from travel sites like Orbitz and Travelocity which are installed on my samsung 7+ tab running ICS. It must have something to do with stock as they were installed on CM 10 on nook hd+. While I prefer stock due to the excellent sleep option and battery life, I may have to go back to CM 10.
PeeAm
Click to expand...
Click to collapse
His terminology was mixed up. He did not mean "fix permissions" either. He meant flashing the Extras zip, which enables unknown sources, not "flash permissions". But you had already done that.
So I don't know how to fix your problem.
Sent from my Nook HD+ running CM10.1 on emmc.
Yep, to me getting unknown sources working is a permission, but wrong in the true Android terminology.
Regardless, being able to install by side loading and the 2.1 update make this one of the best tablets. Actually, it seems a direct equal to the Excite 7.7 which IMO is the best current overall tablet. Better in some regards. The display and power efficiency in sleep mode is a big part of the departuresweight for the HD+.
Thanks, All is Well !
leapinlar said:
His terminology was mixed up. He did not mean "fix permissions" either. He meant flashing the Extras zip, which enables unknown sources, not "flash permissions". But you had already done that.
So I don't know how to fix your problem.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Leapinlar- you have been wonderful with your work on this tablet . Your note made me realize that may be there is something wrong with the apk files I had copied from my other tablet. After spending many hours searching on google for sites that were not merely links to google play, I downloaded the apk files I needed. All of them installed perfectly !
Thanks once again to you,verygreen and bokbokan for making nook tablet the best tablet out there.
kind regards
PeeAm
Leap, rocks!
May be not the right place to ask, if that I am sorry. Anyway, by flashing extra.zip, will it help with host USB on the nook hd+?
TIA
samteee said:
May be not the right place to ask, if that I am sorry. Anyway, by flashing extra.zip, will it help with host USB on the nook hd+?
TIA
Click to expand...
Click to collapse
No, it has nothing to do with that.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
No, it has nothing to do with that.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Hello, I followed your tutorial to the exact letter and all I got was my nook restarting several times before finally wiping itself and having to do the whole set up process again. I formatted the card and set the card to active like instructed. But which rar do I need? I am running the nook hd with 2.1.0. Software. I tried all the nook hd bootfiles rars listed and added the zip I wanted to install and it keeps rebooting and wiping.
Thanks
pmdash said:
Hello, I followed your tutorial to the exact letter and all I got was my nook restarting several times before finally wiping itself and having to do the whole set up process again. I formatted the card and set the card to active like instructed. But which rar do I need? I am running the nook hd with 2.1.0. Software. I tried all the nook hd bootfiles rars listed and added the zip I wanted to install and it keeps rebooting and wiping.
Thanks
Click to expand...
Click to collapse
You need the one that says NookHD, CWM and BOOTFILES and ends in rar. You must extract the 5 files there to the SD. Be sure to copy the one named MLO first.
Sent from my BN NookHD+ using XDA Premium 4 mobile app
leapinlar said:
You need the one that says NookHD, CWM and BOOTFILES and ends in rar. You must extract the 5 files there to the SD. Be sure to copy the one named MLO first.
Sent from my BN NookHD+ using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok thanks. I think I tired that one. But I will give it another go.
Hi, I have a nook Color running cm7.2 and using the ADW launcher.
Earlier I downloaded an app that allows me to have an iOS type lockscreen after I unlock the primary lockscreen. I set up quick unlock where you use the home button to unlock the tablet, but it doesn't recognize the Nook button as the home button when it is.
Now I can't unlock my tablet.
Oops.
Is there any way to reset the lock screen or somehow fix this without formatting the card?
Thanks.
If it's a free app you could adb to /data/app and rename the offending lock screen apk. Just add ".bak" (without quotes) to the end of the filename. You may have to reboot it but the app should be gone after that.
If you at running CM entirely of the SD card you should be able to browse to it with the card plugged into a computer and rename the file there.
Sent from my Galaxy Nexus using Tapatalk
Thanks for your reply, but that's not exactly the problem I'm having.
The problem I'm having is that I set up quick unlock so it would unlock when I hit the home button. The nook doesn't recognize the Nook button on the tablet as home button. I don't have the home button set up on the screen as a soft button.
Thanks for your help.
Sent from my iPhone using Tapatalk
Sorry I misunderstood.
You might have a look at this thread :http://forum.xda-developers.com/showthread.php?t=971768. If it is the home key you have as the quick unlock it should be keyevent 3 instead of 82 in the command.
Hope it works, good luck.
No problem! Thanks for your help! Il
Is there an easier way??
Would there be a way to reinstall the OS, like in an update?
AndroidAppleBear said:
Would there be a way to reinstall the OS, like in an update?
Click to expand...
Click to collapse
Go to my NC Tips thread linked in my signature and follow item A15 to re-install stock.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Go to my NC Tips thread linked in my signature and follow item A15 to re-install stock.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Could I do that, but with CM7? I run CM from an SD card, so my NC isn't rooted.
AndroidAppleBear said:
Could I do that, but with CM7? I run CM from an SD card, so my NC isn't rooted.
Click to expand...
Click to collapse
I thought you were talking about stock.
You need to go to my tips thread and install the alternate CWM for SD in section B in the second post. Then use that to do a factory reset. That should remove the unlock.
Sent from my SCH-i705 using XDA Premium HD app
leapinlar said:
if you want CM7.2 just reinstall the zip. I thought you were talking about stock.
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
Oh, okay. Thanks!
To reinstall, would I just copy and paste the .zip into the boot partition of the SD?
AndroidAppleBear said:
Oh, okay. Thanks!
To reinstall, would I just copy and paste the .zip into the boot partition of the SD?
Click to expand...
Click to collapse
See my edit above.
Sent from my SCH-i705 using XDA Premium HD app
Than you so much for your help! I did what you said on your topic, and things went smoothly.
Everything's fixed!
Sent from my iPhone using Tapatalk
I'm running 10.2.1-encore and gapps 20130813. I'm trying to use the auto updater to update to version 11 however when I do it says theres no gapp installer. I'm installing (rather trying to)to a 2gb sd card in my nook. I have no clue how to update to version 11. I've looked on here, and one guide in particular seemed helpful. It actually helped me install the current version I'm using but the auto-updater won't install 11. Apparently I'm to dumb to figure this out, could someone help me get 11 on my nook color and the new google apps version?
cgamer76 said:
I'm running 10.2.1-encore and gapps 20130813. I'm trying to use the auto updater to update to version 11 however when I do it says theres no gapp installer. I'm installing (rather trying to)to a 2gb sd card in my nook. I have no clue how to update to version 11. I've looked on here, and one guide in particular seemed helpful. It actually helped me install the current version I'm using but the auto-updater won't install 11. Apparently I'm to dumb to figure this out, could someone help me get 11 on my nook color and the new google apps version?
Click to expand...
Click to collapse
You cannot autoupdate to CM11. CM11 requires entirely different CWM, rom and gapps.
Sent from my BN NookHD+ using XDA Premium HD app
Yea I kinda figured I couldnt use the auto update but how can I can about removing 10 from my sdcard and updating it to 11?
cgamer76 said:
Yea I kinda figured I couldnt use the auto update but how can I can about removing 10 from my sdcard and updating it to 11?
Click to expand...
Click to collapse
Start over by putting the newest image (rev8c) on an SD. It is required by CM11. But that image also requires at least a 4GB SD. If you want to save your apps and settings, use Titanium Backup.
Sent from my BN NookHD+ using XDA Premium HD app