Related
I can't seem to find a link for the version of TWRP that will work on model P3113. I have CyanogenMod 10 Rom JB 4.1.1 with Clockwork Mod 6x.
Can I even install TWRP over CWM6 and can I do it in Mobile ODIn Pro? I have that installed.
I also have Goo Manager and cannot figure out why I cannot find or download TWRP from there unless they do not have a version for my Model or that ROM/Kernel?
I am new to the forum so I cannot ask questions yet in the developer sections which is starting to get annoying since I had one or two threads I could have asked this question on.
Thanks
Use goo manager to install twrp.
Sent from my SGH-I727 using Tapatalk 2
scottx . said:
Use goo manager to install twrp.
Sent from my SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
I have tried that method and it cannot find any files to download
androidfr33k said:
I have tried that method and it cannot find any files to download
Click to expand...
Click to collapse
Use mobile Odin if you have the proper files. Why do you want twrp instead of cwm?
scottx . said:
Use mobile Odin if you have the proper files. Why do you want twrp instead of cwm?
Click to expand...
Click to collapse
Just wanted to try it. So this brings me back to my first question. Is there a compatible version for the Samsung galaxy tab 2 7 inch running cyanogenmod10 latest nightly build?
I Google searched and searched within Samsung forum. I found a version 2.2.1 but I think it was for a hero touch
androidfr33k said:
Just wanted to try it. So this brings me back to my first question. Is there a compatible version for the Samsung galaxy tab 2 7 inch running cyanogenmod10 latest nightly build?
I Google searched and searched within Samsung forum. I found a version 2.2.1 but I think it was for a hero touch
Click to expand...
Click to collapse
Recovery has nothing to do with the ROM. Nothing!
I had it saved. I'm a pack rat when it comes to files. Flash it with cwm. http://d-h.st/B1w
scottx . said:
Recovery has nothing to do with the ROM. Nothing!
I had it saved. I'm a pack rat when it comes to files. Flash it with cwm. http://d-h.st/B1w
Click to expand...
Click to collapse
Will this version work on the p3113? The linked file is p3110
Thanks
I just thought about what you said that cwm recovery has nothing to do with ROM but according to the guide I used it said I had to use a cwm version 6 with JB. so that is why I mentioned the ROM version because it was based on JB. So would you not think it does indeed play an important role in choosing a compatible recovery?
androidfr33k said:
I just thought about what you said that cwm recovery has nothing to do with ROM but according to the guide I used it said I had to use a cwm version 6 with JB. so that is why I mentioned the ROM version because it was based on JB. So would you not think it does indeed play an important role in choosing a compatible recovery?
Click to expand...
Click to collapse
Developers or tutorial writers list the recovery because thats the one they preffer / use themselves, but most of the time, it doesnt matter which one you use!!
Btw, the reason they say to use CWM6 with Jelly Bean, is because CWM will automatically stop JB from erasing CWM and returning the stock recovery,
but even if you flash with lets say CWM5, you can still remove the script that will undo CWM, but you will have to do it manually (it's an extra step)
scottx . said:
Recovery has nothing to do with the ROM. Nothing!
I had it saved. I'm a pack rat when it comes to files. Flash it with cwm. http://d-h.st/B1w
Click to expand...
Click to collapse
Will this version work on my GT-P3113?
Thanks
Try this one by nycbjr. It's not the official one, but it is known to work with the P3113
http://rootzwiki.com/topic/27140-recoverytouchtwrp211galaxy-tab-2-7-and-10662012/
androidfr33k said:
Will this version work on my GT-P3113?
Thanks
Click to expand...
Click to collapse
Yes. Works fine on any 31xx. I ran it on my 3113 for a while before cwm came out.
Hi,
This is the first time I've tried rooting a device so bare with me :good:.
It's taken me a few attempt to get things working on my Defy MB525 I've managed to root it with SuperOneClick and install either CWM 2.5.1.8 or SndInit2.3 (which uses CyanogenDefy Recovery v5.0.3.1). I'm now at a stumbling block where when I try to install a custom ROM on the device I keep getting...
"E:error in /sdcard/*ROM name*.zip
(status 0)
Installation Aborted"
Is there something I'm doing wrong or is it just the recovery programs I'm using?
What's the ROM you are trying to install?
themaker69 said:
What's the ROM you are trying to install?
Click to expand...
Click to collapse
I've tried a few now. The latest 4.4 alpha roms by Quarx, CM10 Android 4.1.2 also by Quarx and MokeeOS 43.1 and all come up with error.
Try to wipe the sdcard.
I'm downloading the file on a different computer as maybe the Antivirus on the work PC is messing it about. Also does the class of SDcard make a difference? It's only a class 4 8GB.
themaker69 said:
Try to wipe the sdcard.
Click to expand...
Click to collapse
Formatting it now.
novakanedj said:
I'm downloading the file on a different computer as maybe the Antivirus on the work PC is messing it about. Also does the class of SDcard make a difference? It's only a class 4 8GB.
Click to expand...
Click to collapse
No, the class has nothing to do. Use recovery to wipe, and not windows.
novakanedj said:
Hi,
This is the first time I've tried rooting a device so bare with me :good:.
It's taken me a few attempt to get things working on my Defy MB525 I've managed to root it with SuperOneClick and install either CWM 2.5.1.8 or SndInit2.3 (which uses CyanogenDefy Recovery v5.0.3.1). I'm now at a stumbling block where when I try to install a custom ROM on the device I keep getting...
"E:error in /sdcard/*ROM name*.zip
(status 0)
Installation Aborted"
Is there something I'm doing wrong or is it just the recovery programs I'm using?
Click to expand...
Click to collapse
4.1 should install. 4.3 and 4.4 need a newer recovery.
Sent from my Nexus 7 using Tapatalk
hotdog125 said:
4.1 should install. 4.3 and 4.4 need a newer recovery.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
novakanedj:
From 4.1 to 4.3 I installed using last TWRP. For 4.4 you need to use this.
hotdog125 said:
4.1 should install. 4.3 and 4.4 need a newer recovery.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Which recovery installs do the newer versions need and is there an install guide for these?
novakanedj said:
Which recovery installs do the newer versions need and is there an install guide for these?
Click to expand...
Click to collapse
For 4.3+ you need to first install 4.1/4.2 first to get the newer recovery.
Sent from my Nexus 7 using Tapatalk
Right I've just managed to get cm-10-20131030-NIGHTLY-mb526.zip to install from Quarx. Will let you know if the install is successful.:good: I would like to eventually install 4.4 KitKat when a more stable release is available.
edit: Succesfully installed . Just got to put Gapps on now.
Just install the zip from SDcard using your current custom recovery.
hotdog125 said:
For 4.3+ you need to first install 4.1/4.2 first to get the newer recovery.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply. I noticed that after I flashed with the 4.1.2 Quarx from there was a new bootloader on it. This should make it easier. I had to wipe and start again yesterday because I cocked up the Gapps install. In the end I went with the 30th Oct 2013 build of CM10 by Quarx and got the Gapps from www.goo.im/gapps. All seems to be running fine now and finished setting it up last night.
My girlfriend has a phone she can use now as her old one broke and she didn't want to use the Defy as the data couldn't be switched off on the stock ROM and would cost her a lot on her data plan (500MB a mth). Her Mum got a new contract with a Desire C so the Defy was going spare .
Here you go folks. The miui v5 3.11.29 official for HTC ONE is released
http://en.miui.com/download-111.html
For MIUI English Forum
> http://en.miui.com/download-111.html
Harish_Kumar said:
For MIUI English Forum
> http://en.miui.com/download-111.html
Click to expand...
Click to collapse
we still need to install 4.2.2 gapps in this rom.
saketh91 said:
we still need to install 4.2.2 gapps in this rom.
Click to expand...
Click to collapse
Oh you completed installing the rom?
i guess first we need to install the kernal and then flash the rom..right?
this is the first time i am trying an official MIUI rom!
Harish_Kumar said:
Oh you completed installing the rom?
i guess first we need to install the kernal and then flash the rom..right?
this is the first time i am trying an official MIUI rom!
Click to expand...
Click to collapse
I don't know abt the kernel but I am loving this rom so far. No lags, the UI is perfect fit for the screen and loving some features like DND, IR etc..,
but the only thing missing is the gapps. We need to install separately i think. Loving the Internationalized weather widget too.
I get build prop problem, who else got it ?
hth2813 said:
I get build prop problem, who else got it ?
Click to expand...
Click to collapse
you mean while installing?. It installed perfectly for me on TWRP 2.6.3.0
saketh91 said:
you mean while installing?. It installed perfectly fine for me on TWRP 2.6.3.0
Click to expand...
Click to collapse
Yeah, what is your current rom, cid, mid ?
hth2813 said:
Yeah, what is your current rom, cid, mid ?
Click to expand...
Click to collapse
I was using SD v11.1 before and now installed this rom with no issues. Mine has supercid. I still don't understand what you meant abt build prop problem. Where did you get that error? While installing or while modifying the build prop in the rom?
saketh91 said:
I was using SD v11.1 before and now installed this rom with no issues. Mine has supercid. I still don't understand what you meant abt build prop problem. Where did you get that error? While installing or while modifying the build prop in the rom?
Click to expand...
Click to collapse
I got that problem while installing ROM, i am in GPE 4.4
I'm also getting a status 7 getprop error in recovery.
hth2813 said:
I got that problem while installing ROM, i am in GPE 4.4
Click to expand...
Click to collapse
Ok there can be different reasons for this.
1.May be a bad download. Try downloading it again.
2.May be you did not clean flash it by wiping cache,system,data. Try wiping everything except internal storage and try again.
3.May be the recovery you are using doesn't support installing this rom. Try TWRP 2.6.3.0 I got it installed perfectly with that.
4.And finally the firmware which you are on. If it is GPE firmware then try switching to sense before flashing this. I had hell lot of problems with GPE firmware like unlocking the bootloader, installing the roms etc..,
May be these are not the reasons for your problem but just give it a try and report back
Droid69 said:
I'm also getting a status 7 getprop error in recovery.
Click to expand...
Click to collapse
You get status 7 error only in three cases.
1.You edited the updater script in the rom
2.You did not download the rom properly.
3.Mainly you are not using the right recovery. Try using TWRP 2.6.3.0 or higher may be.
saketh91 said:
You get status 7 error only in three cases.
1.You edited the updater script in the rom
2.You did not download the rom properly.
3.Mainly you are not using the right recovery. Try using TWRP 2.6.3.0 or higher may be.
Click to expand...
Click to collapse
1. No
2. Could be a bad download, i will download it again and retry.
3. Im on the latest.
Droid69 said:
1. No
2. Could be a bad download, i will download it again and retry.
3. Im on the latest.
Click to expand...
Click to collapse
ok before you re download just try installing it with TWRP 2.6.3.0 too because i faced some problems earlier with the latest TWRP. Just give a try
saketh91 said:
ok before you re download just try installing it with TWRP 2.6.3.0 too because i faced some problems earlier with the latest TWRP. Just give a try
Click to expand...
Click to collapse
Rom flashed with TWRP 2.6.3.0 thanks.
Ah, i have just tried CWM Recovery and it installed successful
Droid69 said:
Rom flashed with TWRP 2.6.3.0 thanks.
Click to expand...
Click to collapse
Glad you got it installed perfectly!!
hth2813 said:
Ah, i have just tried CWM Recovery and it installed successful
Click to expand...
Click to collapse
Nice to hear that you got it installed perfectly.:laugh:
hth2813 said:
I get build prop problem, who else got it ?
Click to expand...
Click to collapse
yep the same problem
hi there i got a second hand s4 i9500CHN(chinease version but is original) and came with aurora s6 rom and i wandt to install another rom. The problem is that i get always a error "Error Executing Updater" in twrp. ive tried install cwm and phils but i get error status 7. idk why but the aurora rom is the only one that installs in recovery
I cant even flash any rom in odin cuz i get and error "fail" in odin. ive instaled the drivers and odin detects phone so i dont know whats the problem here. i get status "secure download : enabled" in donwload mode. plz help
i added a pic from download mode, maybe something might be wrong
Hi,
Good to see you create a separate thread.
With Chinese model, you can only install Chinese stock firmware. You can't install any firmware other than Chinese one unless you use a PIT file.
As the addition, the latest Chinese firmware is I9500ZCUJOH2.
Sent from my ASUS_Z00AD
frederic5000 said:
hi there i got a second hand s4 i9500CHN(chinease version but is original) and came with aurora s6 rom and i wandt to install another rom. The problem is that i get always a error "Error Executing Updater" in twrp. ive tried install cwm and phils but i get error status 7. idk why but the aurora rom is the only one that installs in recovery
I cant even flash any rom in odin cuz i get and error "fail" in odin. ive instaled the drivers and odin detects phone so i dont know whats the problem here. i get status "secure download : enabled" in donwload mode. plz help
i added a pic from download mode, maybe something might be wrong
Click to expand...
Click to collapse
Only use TWRP. The rest is outdated. I don't know which other rom you tried to install but make sure your download is correct. Sounds to me like a bad download.
I downloaded the files twice and keeps the same
krasCGQ said:
Hi,
Good to see you create a separate thread.
With Chinese model, you can only install Chinese stock firmware. You can't install any firmware other than Chinese one unless you use a PIT file.
As the addition, the latest Chinese firmware is I9500ZCUJOH2.
Sent from my ASUS_Z00AD
Click to expand...
Click to collapse
I have tried that too. I dont know how but i did make to change the device nme from i9500chn to a normal i9500 but still nothin
Lennyz1988 said:
Only use TWRP. The rest is outdated. I don't know which other rom you tried to install but make sure your download is correct. Sounds to me like a bad download.
Click to expand...
Click to collapse
Some ROMs like MIUI and Flyme still use (need) CWM and PhilZ Touch (always fail when being installed via TWRP).
Sent from my ASUS_Z00AD
---------- Post added at 21:01 ---------- Previous post was at 20:56 ----------
@frederic5000
Thing I forgot, untick Zip signature verification may help in several cases. But if still fails, I would contact the seller instead of flashing anywhere or stay with rooted stock Chinese firmware.
Sent from my ASUS_Z00AD
krasCGQ said:
Some ROMs like MIUI and Flyme still use (need) CWM and PhilZ Touch (always fail when being installed via TWRP).
Sent from my ASUS_Z00AD
---------- Post added at 21:01 ---------- Previous post was at 20:56 ----------
@frederic5000
Thing I forgot, untick Zip signature verification may help in several cases. But if still fails, I would contact the seller instead of flashing anywhere or stay with rooted stock Chinese firmware.
Sent from my ASUS_Z00AD
Click to expand...
Click to collapse
whats the lasest version of philz?
UPDATE
after hours and hours of trying i did install the rom on odin. But i still cant install rom o twrp/philz....at least some of them. The strange thing is that im only able to install tw based roms but if i try to install miui or cm or fly me os it just wont work.
frederic5000 said:
after hours and hours of trying i did install the rom on odin. But i still cant install rom o twrp/philz....at least some of them. The strange thing is that im only able to install tw based roms but if i try to install miui or cm or fly me os it just wont work.
Click to expand...
Click to collapse
Then, I would stay on stock-based ROMs and root it. That's enough on situation like this.
Sent from my ASUS_Z00AD
krasCGQ said:
Then, I would stay on stock-based ROMs and root it. That's enough on situation like this.
Sent from my ASUS_Z00AD
Click to expand...
Click to collapse
yes thats what i did. i flashed stock lollipop, rooted a removed some useless apps and i´m happy with it.
thx for all ur help
Can any one help me try to get cm11 on my verizon note 3. I have TWRP and Unlocked Bootloader with root running CM13 but I still want to run cm11 and when I tried to flash the rom, it gave me a updater 7 error. If you know a way to fix this please tell me.
lootrooter said:
Can any one help me try to get cm11 on my verizon note 3. I have TWRP and Unlocked Bootloader with root running CM13 but I still want to run cm11 and when I tried to flash the rom, it gave me a updater 7 error. If you know a way to fix this please tell me.
Click to expand...
Click to collapse
Error 7 is typically a mismatch condition between the fingerprint of the recovery in use and the model of the phone the ROM is intended for - the ROM author puts an "assert" statement in the installer script to prevent dummies from flashing a ROM from the wrong device to a phone.
Assuming you didn't make a mistake downloading the wrong cm rom for the SM-N900V Note 3 this could be a "hlte" vs "hltevzw" issue depending on which TWRP version you have installed.
You can work around this by unpacking the ROM .zip file, deleting the offending "assert" line in the installer script, and red zipping the ROM.
bftb0 said:
Error 7 is typically a mismatch condition between the fingerprint of the recovery in use and the model of the phone the ROM is intended for - the ROM author puts an "assert" statement in the installer script to prevent dummies from flashing a ROM from the wrong device to a phone.
Assuming you didn't make a mistake downloading the wrong cm rom for the SM-N900V Note 3 this could be a "hlte" vs "hltevzw" issue depending on which TWRP version you have installed.
You can work around this by unpacking the ROM .zip file, deleting the offending "assert" line in the installer script, and red zipping the ROM.
Click to expand...
Click to collapse
It was just a "hlte" vs "hltevzw" error, thanks
Did you get CM11 working?
Sent from my SM-N900V using Tapatalk
Old 4.4 rom on new vzw bootloader
bishop0114 said:
Did you get CM11 working?
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
I did and c-rom. Which i love. But with both of them lte data goes in and out. I've tried a bunch of things but can't figure it out. It's weird editing apns causes them to be deleted. Any ideas anyone?
how to install
themrgoats said:
I did and c-rom. Which i love. But with both of them lte data goes in and out. I've tried a bunch of things but can't figure it out. It's weird editing apns causes them to be deleted. Any ideas anyone?
Click to expand...
Click to collapse
can tell me how did u installed it? i am getting ERROR : 7 in TWRP , cm-11-20160612-NIGHTLY-hltevzw.zip (223.82 MB)
Rooted 0B6 then Unlocked Bootloader.
dat ka said:
can tell me how did u installed it? i am getting ERROR : 7 in TWRP , cm-11-20160612-NIGHTLY-hltevzw.zip (223.82 MB)
Rooted 0B6 then Unlocked Bootloader.
Click to expand...
Click to collapse
TWRP error 7 typically means you're trying to install the zip onto the wrong device.
Sent from my SM-N900V using Tapatalk
Yes if you are using the hltevzw twrp then just flash the hlte generic twrp and u can flash roms that don't require the hltevzw twrp to see the right rom is version is being flashed.
One more question , i am running JasmineRom its 5.0.x CM 11 is 4.x.x Will it work? if i install it?
dat ka said:
One more question , i am running JasmineRom its 5.0.x CM 11 is 4.x.x Will it work? if i install it?
Click to expand...
Click to collapse
I don't think so but was wondering since we have an unlocked bootloader, can we downgrade to a developer 4.4.2 rom and then install the cm11?
Sent from my SM-N900V using Tapatalk