Hi all...
I'm using P3110 - JB v4.2.2(stock GB) - PhilTouchRecovery.v5.08.5 - Rooted
with couple questions:
1. If I set brightness adjustment to "auto", display just too DIM. How to fix it?
2. When I enter Recovery mode (Phil's), even only for make CWM Backup; binary counter will be added. Yes, it can be easily fixed by Triangle Away, but is that normal?
Thank you.
Related
Can someone point me in the direction to get my tab unrooted.
Ive tried to unroot but it says wait 5 secs then tells me its not unrooted
I also turned it off and tried it again same thing.
I did have my tab rooted on a diff rom now im back on stock with it still rooted idk if that could mean somethiing well just let me know
Please and Thanks
If you have a smarta$$ remark save it for someone else....
Have you confirmed it is actually still rooted? Using root checker in the market or otherwise?
fermunky said:
Have you confirmed it is actually still rooted? Using root checker in the market or otherwise?
Click to expand...
Click to collapse
Yes it is, I still have su in my files and in my apps list, i also used root checker.
Why do you post this in 2 subforums?
Did you managed to get it unrooted?
if you can't get it unrooted through apps, one sure way is to flash a non-rooted stock rom... of course the big question is... why are you trying to unroot?
Hi AZDR1V3R,
I had the same problem, which is now solved.
Try the following sequence (worked for me; I have an Iconia with HC3.1 Stock ROM A500_4.017.07_EMEA_CUS7):
0) Switch off your device completely and switch it on again (fresh restart)
1) Rotate your tab in the protrait display orientation
2) Switch on the fix switch for the orientation
3) Root your device using Iconia Root (wait until the 5s delay has been finished and the success message has been displayed)
4) Unroot your device using Iconia Root; now the message of a successful unroot appears after the 5s delay.
The essential difference to my previous unsuccessful attemps to unroot is the usage of the orientation lock switch.
Regards
Luis
LUIS_ASS said:
Hi AZDR1V3R,
I had the same problem, which is now solved.
Try the following sequence (worked for me; I have an Iconia with HC3.1 Stock ROM A500_4.017.07_EMEA_CUS7):
0) Switch off your device completely and switch it on again (fresh restart)
1) Rotate your tab in the protrait display orientation
2) Switch on the fix switch for the orientation
3) Root your device using Iconia Root (wait until the 5s delay has been finished and the success message has been displayed)
4) Unroot your device using Iconia Root; now the message of a successful unroot appears after the 5s delay.
The essential difference to my previous unsuccessful attemps to unroot is the usage of the orientation lock switch.
Regards
Luis
Click to expand...
Click to collapse
Unfortunately these steps don't work for me. Anyone else with a sublime solution?
You have to activate Application --> Decomment --> USB debugging
If all else fails, when you get your next Honeycomb update it will do away with root for you, with no way to get it back, at least for now. Patience.
Hello all,
My Iconia A500's auto screen rotation just suddenly went dead on me. Flipping the lock toggle near the volume buttons on and off doesn't do anything.
I've tried resetting the device via the reset button, factory reset it via the settings menu as well as the recovery menu (oh yeah, it's rooted, currently using thor's CW recovery v.1.5). I've also tried installing another ROM, deleting the cache partition and dalvik cache, fix permission, all to no avail.
I don't think its faulty gyro since I can still play NFS just fine. Its just refusing to auto rotate the screen.
Any of you guys ever experience this? Or maybe have any ideas I can try out ?
Thanks in advance!
hello, are you using thor ROM?
lm2011 said:
hello, are you using thor ROM?
Click to expand...
Click to collapse
I did, just to see if it can fix the issue (the auto rotation went dead while i used a rooted stock rom). why?
Oh, I'm aware that Thor's newest ROM doesnt support the hardware autorotation toggle. I've tried the software toggle without any effect.
Hi,
Latest official firmare XXUBNB2.
* Samsung removes binary count on download screen
* Alarm App was nice
* Allshare play removed
* Better Ram management
* better WIFI and Network
- becomes very slow after 2 days usage (need to restart)
- sharp battery charge reduce
??? Boot loader need to check.
Dont update if you want to use custom firmwares (4.4.2)
* First you can notice 3 times flickering on installed CWM recovery
* After installation you can notice a heavy lag when you open settings or open some Apps.
* Selecting options in settings may lead to freeze your phone (often)
* Install software (also via ADB) is painful.
want to use custom firmware again
* you need to go back to old official firmware or leaked firmware (re - partition recommended)
m.arun_kumar said:
Hi,
Latest official firmare XXUBNB2.
* Samsung removes binary count on download screen
* Alarm App was nice
* Allshare play removed
* Better Ram management
* better WIFI and Network
- becomes very slow after 2 days usage (need to restart)
- sharp battery charge reduce
??? Boot loader need to check.
Dont update if you want to use custom firmwares (4.4.2)
* First you can notice 3 times flickering on installed CWM recovery
* After installation you can notice a heavy lag when you open settings or open some Apps.
* Selecting options in settings may lead to freeze your phone (often)
* Install software (also via ADB) is painful.
want to use custom firmware again
* you need to go back to old official firmware or leaked firmware (re - partition recommended)
Click to expand...
Click to collapse
Have you updated it OTA?? I guess samsung have stopped the rolling of this update in India in very few days after release.
Even XXUBMK3 has no binary count.
Sent from my GT-I9082 using Tapatalk
Hello. I have Galaxy S4 i9505. I was with my original software kitkat 4.4.2 before 10 days i receive update from 16MB and after install him my phone start crashing and bugging... After that i change my firmware with other stocks and 2 not stock but same bugs. My brightness is bugged . I can`t use auto adjust because i have only 2-3 points that`s are ok, all others are very dark or extra bright . Here is attached pictures of my phone brightness.
VLaDi-G said:
Hello. I have Galaxy S4 i9505. I was with my original software kitkat 4.4.2 before 10 days i receive update from 16MB and after install him my phone start crashing and bugging... After that i change my firmware with other stocks and 2 not stock but same bugs. My brightness is bugged . I can`t use auto adjust because i have only 2-3 points that`s are ok, all others are very dark or extra bright . Here is attached pictures of my phone brightness.
Click to expand...
Click to collapse
Try with this method:
Go to recovery by holding volume up+home button+power and after this select wipe data and cache... MAYBE THIS METHOD WILL HELP YOU...
If anything not work go to a SAMSUNG service and say your problem...
Backup the stuff you want to keep and try a factory reset.
I already try both several times. When I go on recovery mode it's same extra bright....
VLaDi-G said:
I already try both several times. When I go on recovery mode it's same extra bright....
Click to expand...
Click to collapse
So this look like HW problem. Use your warranty
verny94 said:
So this look like HW problem. Use your warranty
Click to expand...
Click to collapse
I don't have warranty... Already expired...
I don't think that's from hw because when i press start button at firs screen is normal and when boot android system video go crazy...
Hello guys, after I installed DarkLord V1 then V2-2.1, I got rotation issue. When I turn on camera, camera screen button are auto rotated on right landscape mode. and when I take pics pics in gallery are rotated. When I turn on rotation, and I go to gallery, gallery is rotated on right side like landscape mode but phone is in normal position. If I rotated phone, rotation go on wrong side. also same issue with other apps. I have N900T. next, when I install CM12.1 for N900T nightly official - Rotation WORKS lol! all good then. When I flash 5.0 officail stock via Odin, again same issue with rotation. BAck to CM12.1 all good. Now I tried Phronesis Rom v2.0 N5 port, and same issue with rotation. I will pay for rotation fix. If you need some more info from me, logs etc let me know. Ty in advance.
markokrstic said:
Hello guys, after I installed DarkLord V1 then V2-2.1, I got rotation issue. When I turn on camera, camera screen button are auto rotated on right landscape mode. and when I take pics pics in gallery are rotated. When I turn on rotation, and I go to gallery, gallery is rotated on right side like landscape mode but phone is in normal position. If I rotated phone, rotation go on wrong side. also same issue with other apps. I have N900T. next, when I install CM12.1 for N900T nightly official - Rotation WORKS lol! all good then. When I flash 5.0 officail stock via Odin, again same issue with rotation. BAck to CM12.1 all good. Now I tried Phronesis Rom v2.0 N5 port, and same issue with rotation. I will pay for rotation fix. If you need some more info from me, logs etc let me know. Ty in advance.
Click to expand...
Click to collapse
1. Backup all your internal data.
2. Flash via ODIN, TWRP being in one custom rom.
3. Boot in TWRP - Wipe - Advanced wipe - Select all (less USB-OTG and External Card) - Wipe.
4. Reboot in Download Mode (It will ask you that you don't have operative system if are you sure - CLICK yes, and if you need SUPERSU, click no).
5. Download the latest firmware for your device to your pc: HERE.
6. Flash it via ODIN like in the pic attached.
7. Let the process finish till you see PASS in green.
Joku1981 said:
1. Backup all your internal data.
2. Flash via ODIN, TWRP being in one custom rom.
3. Boot in TWRP - Wipe - Advanced wipe - Select all (less USB-OTG and External Card) - Wipe.
4. Reboot in Download Mode (It will ask you that you don't have operative system if are you sure - CLICK yes, and if you need SUPERSU, click no).
5. Download the latest firmware for your device to your pc: HERE.
6. Flash it via ODIN like in the pic attached.
7. Let the process finish till you see PASS in green.
Click to expand...
Click to collapse
Already done that and even tried with deleting internal data. Im sure that this have some issue with sensors or libgnustl_shared.so which I replaced with permissions rw-r-r
BTW when I installed accelerometer app now, its show wrong info. I guess accelerometer sensor or some accelerometer filr is wrong for rotation. Idk how all good is on CM12.1 Nightly Official, and on stock or any other custom rom doesnt work.
markokrstic said:
BTW when I installed accelerometer app now, its show wrong info. I guess accelerometer sensor or some accelerometer filr is wrong for rotation. Idk how all good is on CM12.1 Nightly Official, and on stock or any other custom rom doesnt work.
Click to expand...
Click to collapse
Try this APP.
Joku1981 said:
Try this APP.
Click to expand...
Click to collapse
thank you on your time and help but nothing
I too had problems with rotation. This file did it for me. You can try it, you have nothing to lose.
https://mega.nz/#!NlJXHS7J!1lpel6C5GvdjFUNx2tsRzHjSElbTOtogrxKJ4bDZmsg
I see you don't have the n9005, so maybe don't try it.
Dejan Sathanas said:
I too had problems with rotation. This file did it for me. You can try it, you have nothing to lose.
https://mega.nz/#!NlJXHS7J!1lpel6C5GvdjFUNx2tsRzHjSElbTOtogrxKJ4bDZmsg
I see you don't have the n9005, so maybe don't try it.
Click to expand...
Click to collapse
that file f...e up my rotation. Rotation was ok, and only rotation in camera was forced landscape, I replaced this file with rw-r-r and after restart I never fixed rotation again Rotation only work good with CM12.1 5.1.1
nobody?
anyone?