Alright I have a S4 I-337 MF3 that I rooted and tried to get my sim unlock code through some crazy way online. Where the issue started was I right clicked on system in the file explorer and changed the permissions to RW and took off the Execute. After that It really messed up and went into a boot loop with the Samsung/unlock screen. I tried to re flash the phone through kies and now it won't do that (Not even through emergency recovery), Stops and says on the last line in red: SW REV. CHECK FAIL : fused : 2 , Binary : 1. Will not boot into recovery. only download mode.
PLEASE HELP!
This is why you really need to read and research before attempting things
There is currently no way to return tk stock on mf3 if you mess up with something. No kies no odin...kies doesnt even have mf3 yet, and we dont have a firmware leak for odin yet...the new bootloader in mf3 blocks older versions of being flashed hence your error"check fail: fused : 2 , Binary : 1"
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
mg2195 said:
This is why you really need to read and research before attempting things
There is currently no way to return tk stock on mf3 if you mess up with something. No kies no odin...kies doesnt even have mf3 yet, and we dont have a firmware leak for odin yet...the new bootloader in mf3 blocks older versions of being flashed hence your error"check fail: fused : 2 , Binary : 1"
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
So im bricked until it comes out??
NOplaymaker said:
So im bricked until it comes out??
Click to expand...
Click to collapse
Unfortunatly yes :/ unless a dev can come up with something sooner...sorry I know it sucks...but this is the future of all ATT phones as they are no longer going to be selling phones that are not bootloader locked
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
mg2195 said:
Unfortunatly yes :/ unless a dev can come up with something sooner...sorry I know it sucks...but this is the future of all ATT phones as they are no longer going to be selling phones that are not bootloader locked
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
Sucks ass! I guess its off for a prepaid phone until I get my fix...
NOplaymaker said:
Sucks ass! I guess its off for a prepaid phone until I get my fix...
Click to expand...
Click to collapse
did you try this: http://forum.xda-developers.com/showthread.php?t=2360859 ????
norbarb said:
did you try this: http://forum.xda-developers.com/showthread.php?t=2360859 ????
Click to expand...
Click to collapse
Yes! That did get me past my Error triangle to the bootloader, but it just says Samsung and the unlock symbol and loops into the normal recovery. doesn't actually load up.
NOplaymaker said:
Yes! That did get me past my Error triangle to the bootloader, but it just says Samsung and the unlock symbol and loops into the normal recovery. doesn't actually load up.
Click to expand...
Click to collapse
Did you try to restore to factory settings in recovery (stock) ?
norbarb said:
Did you try to restore to factory settings in recovery (stock) ?
Click to expand...
Click to collapse
Yes I did. Nothing. and Cache.
Update:
Just letting you guys know that Samsung will repair the phone for free if it is in the 12 months since the purchase date. They also pay the shipping once you call and place a service order. Guess I'll use my get out of jail free card and restart when it gets back.
Related
I'm with Bell (Canada.) I was hesitant to root this device as it's a pretty significant investment, but I have rooted my original note with few issues, so I figured it should work as long as I follow every step carefully. Well unfortunately, upon first trying to root it, apps would start updating right at bootup, and SuperSU continuously crashed. So I decided I was just going to restore it to my original state and be done with it for now. Nope. Once I did this, the phone would just enter a boot cycle. (How does restoring my backup place me into a boot cycle?)
The only SM-N900W8 firmware downloads I can find are for south american regions... I have tried one of them and it failed to install. I am a bit panicked at the moment. Is there some crucial step I'm missing here?
Apra24 said:
I'm with Bell (Canada.) I was hesitant to root this device as it's a pretty significant investment, but I have rooted my original note with few issues, so I figured it should work as long as I follow every step carefully. Well unfortunately, upon first trying to root it, apps would start updating right at bootup, and SuperSU continuously crashed. So I decided I was just going to restore it to my original state and be done with it for now. Nope. Once I did this, the phone would just enter a boot cycle. (How does restoring my backup place me into a boot cycle?)
The only SM-N900W8 firmware downloads I can find are for south american regions... I have tried one of them and it failed to install. I am a bit panicked at the moment. Is there some crucial step I'm missing here?
Click to expand...
Click to collapse
have the same issue a man on xda helped me to get a nandroodmfrom is phone now my phone boot but no network cause i force flash the south america modem, and i have error msg. process system in not reponding and it boot. do u have an errormmsg too?
Yorgo1982 said:
have the same issue a man on xda helped me to get a nandroodmfrom is phone now my phone boot but no network cause i force flash the south america modem, and i have error msg. process system in not reponding and it boot. do u have an errormmsg too?
Click to expand...
Click to collapse
I got an error message trying to flash a SAM firmware. It would just say FAILED in red letters. I'm going to try the Mexico one next, and hopefully it will work. I'm hoping someone could upload a working backup from their phone.
Apra24 said:
I got an error message trying to flash a SAM firmware. It would just say FAILED in red letters. I'm going to try the Mexico one next, and hopefully it will work. I'm hoping someone could upload a working backup from their phone.
Click to expand...
Click to collapse
wait sammobile if u r with rogers bell telus fido vmc koodo, and if with other carrier contact them with ur phone model and serial num so they will upload it ..
Apra24 said:
I'm with Bell (Canada.) I was hesitant to root this device as it's a pretty significant investment, but I have rooted my original note with few issues, so I figured it should work as long as I follow every step carefully. Well unfortunately, upon first trying to root it, apps would start updating right at bootup, and SuperSU continuously crashed. So I decided I was just going to restore it to my original state and be done with it for now. Nope. Once I did this, the phone would just enter a boot cycle. (How does restoring my backup place me into a boot cycle?)
The only SM-N900W8 firmware downloads I can find are for south american regions... I have tried one of them and it failed to install. I am a bit panicked at the moment. Is there some crucial step I'm missing here?
Click to expand...
Click to collapse
Did you restore from CWM/TWRP?
Pikezer1337 said:
Did you restore from CWM/TWRP?
Click to expand...
Click to collapse
TRWP. I'm in the process of uploading a zip of my backup through hotfile, if anyone else who is having the same problem would want to try it out..
Apra24 said:
TRWP. I'm in the process of uploading a zip of my backup through hotfile, if anyone else who is having the same problem would want to try it out..
Click to expand...
Click to collapse
If you restored through TWRP there is a good chance that you are softbricked. There are restoring issues that mess with the system partition.
Update: I was able to flash the tar file from inside the zip of mexican firmware through odin (I was trying to install the zip through TWRM before... perhaps you need to install stock firmwares through odin? It's been a while.)
It's not rooted, and the icons are all different looking... but it's back in working condition
Apra24 said:
Update: I was able to flash the tar file from inside the zip of mexican firmware through odin (I was trying to install the zip through TWRM before... perhaps you need to install stock firmwares through odin? It's been a while.)
It's not rooted, and the icons are all different looking... but it's back in working condition
Click to expand...
Click to collapse
can u give the file name?
plz
Yorgo1982 said:
can u give the file name?
plz
Click to expand...
Click to collapse
I am using the TCE (Mexican) firmware from this link (It won't let me post links since I'm a newly registered account on these forums, but if you google "n900w8 firmware site:samsungis.com" it will be the first result)
I unzipped the file and flashed the tar file within using odin.
Apra24 said:
I am using the TCE (Mexican) firmware from this link (It won't let me post links since I'm a newly registered account on these forums, but if you google "n900w8 firmware site:samsungis.com" it will be the first result)
I unzipped the file and flashed the tar file within using odin.
Click to expand...
Click to collapse
Not working having same prob and same msg pop up. Means my phone is a factory damaged. And since i rooted it we will see what they will do at sammy lol
Yorgo1982 said:
Not working having same prob and same msg pop up. Means my phone is a factory damaged. And since i rooted it we will see what they will do at sammy lol
Click to expand...
Click to collapse
You know what.. Me being a dumbass tried again to root it after restoring it to the mexican firmware, and now I have the same problem. And now the restore isn't working this time. Why did it work once and not again? Who knows? I just keep trying to factory reset and reflash the firmware, but I'm getting nothing but bootloops.
Could this be a Knox created problem? The reason I say this is you were able to restore a "new" (unknown to Knox) firmware, but it failed on the second time (as it is now no longer newer). I wonder if you were able to find a firmware with a later number (ex ...H2 rather than ...H1) it would install?
Sent from my SAMSUNG-SGH-I317
Dumbo53 said:
Could this be a Knox created problem? The reason I say this is you were able to restore a "new" (unknown to Knox) firmware, but it failed on the second time (as it is now no longer newer). I wonder if you were able to find a firmware with a later number (ex ...H2 rather than ...H1) it would install?
Sent from my SAMSUNG-SGH-I317
Click to expand...
Click to collapse
I'm wondering if the official Bell/Rogers firmware will be available any time soon? Does it typically get released soon after the phone launch, or are they withholding it for some reason?
Apra24 said:
You know what.. Me being a dumbass tried again to root it after restoring it to the mexican firmware, and now I have the same problem. And now the restore isn't working this time. Why did it work once and not again? Who knows? I just keep trying to factory reset and reflash the firmware, but I'm getting nothing but bootloops.
Click to expand...
Click to collapse
I was abe to load the peru (SAM) version on my device with no problem, i am with WIND however but under networks i now have lte as an option as before i did not. i did not just download the kernal i download the stock firmware. do a factory rest after the odin process is done.
eklipse1 said:
I was abe to load the peru (SAM) version on my device with no problem, i am with WIND however but under networks i now have lte as an option as before i did not. i did not just download the kernal i download the stock firmware. do a factory rest after the odin process is done.
Click to expand...
Click to collapse
I was trying the Peru one for a while, but it kept hanging up during the bootup. The message was in a foreign language, but I'm assuming it was "initializing". It would initialize for about 3 minutes then an error message would pop up saying something is not responding.
Did you try recovery factory reset right after Odin does the root and installs the files?
Sent from my SM-N900W8 using XDA Premium 4 mobile app
eklipse1 said:
Did you try recovery factory reset right after Odin does the root and installs the files?
Sent from my SM-N900W8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Well I have been trying to. When I flash the firmware in odin, it reinstalls the stock recovery mod. Right after flashing firmware, it won't go into recovery mode on the first boot (first does some android robot install thing, then boots up). I attempted to install the TWRP recovery directly after the firmware, and then booting directly into recovery to factory reset, but I'm still getting a boot loop.
Apra24 said:
You know what.. Me being a dumbass tried again to root it after restoring it to the mexican firmware, and now I have the same problem. And now the restore isn't working this time. Why did it work once and not again? Who knows? I just keep trying to factory reset and reflash the firmware, but I'm getting nothing but bootloops.
Click to expand...
Click to collapse
I think due of the lock. We are not free as b4 to flash anyrom. 2day im shipping my phone to samsung rooted lol how gr8 is that lol
Yorgo1982 said:
I think due of the lock. We are not free as b4 to flash anyrom. 2day im shipping my phone to samsung rooted lol how gr8 is that lol
Click to expand...
Click to collapse
do they know it's rooted/void? Or did you somehow not trigger the knox/warranty void switch? I may just have to do the same thing...
I am getting the message in ODIN when I try to power my phone on:
Firmware upgrade encountered an issue. Please use Software Repair Assistant & try again.
It happened after I tried to "reroot" my phone after the OTA update from yesterday. I was using Root De La Vega. I must have done something wrong. After about 20 seconds of the recovery process it gave me an error: secure check fail : cache at the last line under the paragraph in the upper left hand corner. Now my phone just sits in ODIN with the above error message. Is there a way to recover?
ephreet said:
I am getting the message in ODIN when I try to power my phone on:
Firmware upgrade encountered an issue. Please use Software Repair Assistant & try again.
It happened after I tried to "reroot" my phone after the OTA update from yesterday. I was using Root De La Vega. I must have done something wrong. After about 20 seconds of the recovery process it gave me an error: secure check fail : cache at the last line under the paragraph in the upper left hand corner. Now my phone just sits in ODIN with the above error message. Is there a way to recover?
Click to expand...
Click to collapse
Why would you accept an OTA update if you are rooted?
Han Solo 1 said:
Why would you accept an OTA update if you are rooted?
Click to expand...
Click to collapse
I'm looking for solutions not someone to critique what I did.
Try to Odin back to stick and use the tar and pit file...you should be good
Sent from my SM-N900V using Tapatalk
ephreet said:
I'm looking for solutions not someone to critique what I did.
Click to expand...
Click to collapse
What the guy was saying is that the OTA breaks root...that's why you're getting the message you're getting. You'll have to go back to the previous build to root as stated above. Next time, do a small amount of research before accepting an OTA.
Sent from my SM-N900V using Tapatalk
ephreet said:
I am getting the message in ODIN when I try to power my phone on:
Firmware upgrade encountered an issue. Please use Software Repair Assistant & try again.
It happened after I tried to "reroot" my phone after the OTA update from yesterday. I was using Root De La Vega. I must have done something wrong. After about 20 seconds of the recovery process it gave me an error: secure check fail : cache at the last line under the paragraph in the upper left hand corner. Now my phone just sits in ODIN with the above error message. Is there a way to recover?
Click to expand...
Click to collapse
yep happened to me too. In odin, try flashing just the PIT file and see what happens
powerwagon said:
What the guy was saying is that the OTA breaks root...that's why you're getting the message you're getting. You'll have to go back to the previous build to root as stated above. Next time, do a small amount of research before accepting an OTA.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
OTA doesn't break root, you just have to use caution - go in SuperSU, select Survival Mode, deselect Enable Superuser. Then take the OTA update - when it's all finished, go back into SuperSU, select Enable Superuser, then uncheck Survival Mode and you're done. Root on latest OTA update.
I believe you need to have the pay/pro version of SuperSU for the Survival Mode option.
bigillz said:
OTA doesn't break root, you just have to use caution - go in SuperSU, select Survival Mode, deselect Enable Superuser. Then take the OTA update - when it's all finished, go back into SuperSU, select Enable Superuser, then uncheck Survival Mode and you're done. Root on latest OTA update.
I believe you need to have the pay/pro version of SuperSU for the Survival Mode option.
Click to expand...
Click to collapse
download supersu pro
say thanks
Correct if I am wrong....wouldn't it be easier just to revert to stock using Odin and then take the update on Kies or OTA then root again? I think this would save a lot of folks the trouble. You can root the OTA and safe strap still works....
Sent from my SM-N900V using Tapatalk
hatimc said:
download supersu pro
say thanks
Click to expand...
Click to collapse
There's nothing in there to extract.
Where is the stock image?
ephreet said:
Where is the stock image?
Click to expand...
Click to collapse
Here you go. You can find it HERE
The SEARCH function works wonders if you actually use it...
downhillvinnie said:
yep happened to me too. In odin, try flashing just the PIT file and see what happens
Click to expand...
Click to collapse
This worked for me. Thanks, Downhillvinnie. I appreciate you being being helpful without any snide comments.
bigillz said:
OTA doesn't break root, you just have to use caution - go in SuperSU, select Survival Mode, deselect Enable Superuser. Then take the OTA update - when it's all finished, go back into SuperSU, select Enable Superuser, then uncheck Survival Mode and you're done. Root on latest OTA update.
I believe you need to have the pay/pro version of SuperSU for the Survival Mode option.
Click to expand...
Click to collapse
Yeah I saw this after i softbricked. I'm relatively new to the Android scene. I did a lot of modding on Winmo and a good bit of jailbreaking, but it's been a while. Admittedly, this was a bit of a careless mistake, but it didn't warrant all of the douschebag remarks. I did do some searching before I asked....
ephreet said:
Yeah I saw this after i softbricked. I'm relatively new to the Android scene. I did a lot of modding on Winmo and a good bit of jailbreaking, but it's been a while. Admittedly, this was a bit of a careless mistake, but it didn't warrant all of the douschebag remarks. I did do some searching before I asked....
Click to expand...
Click to collapse
Okay, I must be missing something. Where did you find the PIT? I'm in the same boat...
http://forum.xda-developers.com/showthread.php?t=2483380
meetoooo
So, I'm a dummy as well. New to android scene after jailbreaking for years. took me a bit to find this thread. Problem is, I have an SM-N900A (AT&T). anybody have links to an AT&T PIT file/return to stock thread? (I am googling)
edit: found this but it appears to trip KNOX: http://forum.xda-developers.com/showthread.php?p=47344583
hunterdg said:
So, I'm a dummy as well. New to android scene after jailbreaking for years. took me a bit to find this thread. Problem is, I have an SM-N900A (AT&T). anybody have links to an AT&T PIT file/return to stock thread? (I am googling)
edit: found this but it appears to trip KNOX: http://forum.xda-developers.com/showthread.php?p=47344583[/QUOTE
OK so now i'm stuck in a reboot loop and can't get out. appears I can't flash the MI9 PDA successfully. so now i just need to download the MJ5 image and theoretically I should be good to go. googling again but suggestions welcome
Click to expand...
Click to collapse
try this one http://www.android.gs/root-att-sams...-with-root-de-la-vega-knox-flags-not-tripped/
Sent from my SM-N900V using XDA Premium 4 mobile app
cam1pbell said:
try this one http://www.android.gs/root-att-sams...-with-root-de-la-vega-knox-flags-not-tripped/
Sent from my SM-N900V using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That's how I got myself into this mess.. used that after my OTA update. I have tried it several times since but if fails almost immediately with the following error. Not sure exactly what it means but I assume it's telling me it can't update the BL because i already have a newer version (after OTA MJ5 update)
Code:
SW REV CHECK FAIL : [sbl1]Fused 2 > Binary 1
thanks for the suggestion
P.S. no luck at sammobile either
Hello, I am having problems with rooting my galaxy note 3 model SM-N900R4 on US cellular. I followed the instructions on true-android.blogspot.com
My problem comes when It gets stuck after the root and stays to the title screen "Samsung Galaxy Note 3". There will be the Seandroid error In the top left corner too. I restart the phone by going to download mode and selecting cancel to reboot the phone. Everything passed in Odin 3.07 and i went to root checker after the reboot and saw that I'm not rooted. Please help, I'm on android 4.3 Stock.
wisconsin1000 said:
Hello, I am having problems with rooting my galaxy note 3 model SM-N900R4 on US cellular. I followed the instructions on true-android.blogspot.com
My problem comes when It gets stuck after the root and stays to the title screen "Samsung Galaxy Note 3". There will be the Seandroid error In the top left corner too. I restart the phone by going to download mode and selecting cancel to reboot the phone. Everything passed in Odin 3.07 and i went to root checker after the reboot and saw that I'm not rooted. Please help, I'm on android 4.3 Stock.
Click to expand...
Click to collapse
You probably used the one for 4.4.
Download this one and flash through odin again.
Reply
hey_joe said:
You probably used the one for 4.4.
Thanks for the quick reply . Also won't this brick my phone since this file is meant for SM-N9005 and i have a SM-N900R4?
Click to expand...
Click to collapse
wisconsin1000 said:
hey_joe said:
You probably used the one for 4.4.
Thanks for the quick reply . Also won't this brick my phone since this file is meant for SM-N9005 and i have a SM-N900R4?
Click to expand...
Click to collapse
This article used SM-N9005 but for 4.4 to root so I'm guessing the one for 4.3 will be safe to use as well. I have SM-N900W8 and works on mine and also for a Tmobile N3.
Click to expand...
Click to collapse
Reply
but for 4.4 to root so I'm guessing the one for 4.3 will be safe to use as well. I have SM-N900W8 and works on mine and also for a Tmobile N3.[/QUOTE]
It actually restarted this time but root Checker still says I have no root access.
It actually restarted this time but still says I have no root access.
wisconsin1000 said:
It actually restarted this time but root Checker still says I have no root access.
It actually restarted this time but still says I have no root access.
Click to expand...
Click to collapse
Do you have custom recovery installed?
Reply
hey_joe said:
Do you have custom recovery installed?
Click to expand...
Click to collapse
I do not have custom recovery. Should I have installed this?
wisconsin1000 said:
I do not have custom recovery. Should I have installed this?
Click to expand...
Click to collapse
Not necessarily but if you had one installed, you can just flash supersu to gain root.
I'm eager to root my 4.3/mje note3 but my last phone was an s3 rooted through twrp. I (a noob) have forgotten how to use Odin and install custom roms through any other method. Would some patient soul please point me to the process?
It's probably a sticky here some where. Thanks!
Sent from my SM-N900V using XDA Premium 4 mobile app
Reply
Is there anyway to get this custom recovery without root?
Reply
I figured it out by installing the apk file in your supersu link you gave me.
So I had my galaxy s4 rooted and rom'd. I went to unroot it so I could sell it via this method http://www.androidrootz.com/2014/03/how-to-unrootunbrick-at-galaxy-s4-sgh.html
Everything passed in Odin, however I cannot get into recovery, it sticks at this screen that says "Software has been found on your device not supported by AT&T"
I can still go into download mode, but not recovery.
Any help? Please
luigic81 said:
So I had my galaxy s4 rooted and rom'd. I went to unroot it so I could sell it via this method http://www.androidrootz.com/2014/03/how-to-unrootunbrick-at-galaxy-s4-sgh.html
Everything passed in Odin, however I cannot get into recovery, it sticks at this screen that says "Software has been found on your device not supported by AT&T"
I can still go into download mode, but not recovery.
Any help? Please
Click to expand...
Click to collapse
If you're on mk2 firmware flash the all in one tar from here in Odin http://forum.xda-developers.com/showthread.php?p=49687770
Sent from my Nexus 5
Thanks! I was running Gravitron 1.5 which was 4.2.2 not sue which firmware it was, but I will try that now.
That worked Thank you so much!!
One more question, there Custom with the little unlock pic is still there on the splash screen. Anyway to remove that?
Try a factory reset
Sent from my SAMSUNG-SGH-I337 using Tapatalk
luigic81 said:
That worked Thank you so much!!
One more question, there Custom with the little unlock pic is still there on the splash screen. Anyway to remove that?
Click to expand...
Click to collapse
It should go away after a few reboots, it doesn't always update immediately.
I have a possible root solution for the T818V/T818A aka the Verizon and ATT version of the T819 if any one is interested in giving it a go?
.
I'll try it out... I have the Verizon variation
Sent from my Pixel XL using Tapatalk
le0.br4zuc4 said:
I'll try it out... I have the Verizon variation
Click to expand...
Click to collapse
Could you post your firmware build number?
le0.br4zuc4 said:
I'll try it out... I have the Verizon variation
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
Here we go. This is for T818VVRU1AQB1 firmware, but probably works on any revision 1 firmware.
Instructions
1. Enable OEM UNLOCK
In Settings>About>Software info tap the build number 7 times to enable developer options. Once you've enabled developer options, developer options will appear in settings just above the About device option. Open developer options, the 4th or 5th option should be “OEM Unlock”. Turn on.
2. Download the eng boot image.
This is a special boot image normally used by engineers, it allows selinux to be booted in permissive mode with relaxed root restrictions.
Do not replace this image with the stock image after rooting your device or you will possibly soft brick your device.
https://www.androidfilehost.com/?fid=529152257862710309
3. Install boot image:
Download Odin v3.11.1
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the SM-T818V_eng_boot.tar to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
Reboot
Check in Settings>About>Software, your device should be in Selinux permissive mode.
4. Install and run Kingroot:
Make sure you have an internet connection.
You may need to run Kingroot several times to gain successful root.
5. Install and run SuperSU me to remove Kingroot and convert to SuperSU (not required) :
https://play.google.com/store/apps/...ore&pcampaignid=APPU_1_uzPDVbGyFcGNyATHrqmoCA
6. Wifi fix:
modify the line below in /system/build.prop:
ro.securestorage.support=true to false
Good luck I hope it works for you. Let me know your outcome.
.
ashyx said:
Could you post your firmware build number?
Click to expand...
Click to collapse
AQA3
Sent from my SM-T818V using Tapatalk
le0.br4zuc4 said:
AQA3
Click to expand...
Click to collapse
You should be fine, let me know your results.
ashyx said:
You should be fine, let me know your results.
Click to expand...
Click to collapse
Will try it out soon
Sent from my SM-T818V using Tapatalk
There's been 10 downloads yet no one has come back with any reports?
ashyx said:
There's been 10 downloads yet no one has come back with any reports?
Click to expand...
Click to collapse
I have T818v on t818vvru1apj1
I could try but can't fine download link for the stock firmware for the restore purpose if anything goes wrong...
burattino said:
I have T818v on t818vvru1apj1
I could try but can't fine download link for the stock firmware for the restore purpose if anything goes wrong...
Click to expand...
Click to collapse
good idea.. I didn't think about that before...
Tablet won't boot up, just stays on the splash screen! I will try to find stock firmware to restore
le0.br4zuc4 said:
good idea.. I didn't think about that before...
Tablet won't boot up, just stays on the splash screen! I will try to find stock firmware to restore
Click to expand...
Click to collapse
The boot image flashed OK with odin? Which splash screen?
This could mean you need to wipe the data partition first for it boot.
I should be able to get the stock firmware for you sometime tomorrow.
ashyx said:
The boot image flashed OK with odin? Which splash screen?
This could mean you need to wipe the data partition first for it boot.
I should be able to get the stock firmware for you sometime tomorrow.
Click to expand...
Click to collapse
Flashed fine. It's the screen that says Android very big and had the tab model, right before it goes into the boot animation.
I'll wipe data partition and report back.
Please don't feel responsible for it, I'm about trying anything for rooting... I'm sure we'll get fixed
Sent from my Pixel XL using Tapatalk
le0.br4zuc4 said:
Flashed fine. It's the screen that says Android very big and had the tab model, right before it goes into the boot animation.
I'll wipe data partition and report back.
Please don't feel responsible for it, I'm about trying anything for rooting... I'm sure we'll get fixed
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
Sure, we'll get it fixed no worries.
Anyway it seems like you need the accompanying botloader if its getting stuck on the bootloader animation.
https://www.androidfilehost.com/?fid=457095661767146350
If it still doesn't boot I'll give you a link to the entire engineering firmware via PM. Then se how you get on with that and gaining root.
.
ashyx said:
Sure, we'll get it fixed no worries.
Anyway it seems like you need the accompanying botloader if its getting stuck on the bootloader animation.
https://www.androidfilehost.com/?fid=457095661767146350
If it still doesn't boot I'll give you a link to the entire engineering firmware via PM. Then se how you get on with that and gaining root.
.
Click to expand...
Click to collapse
Thanks for the help buddy This didn't help either
le0.br4zuc4 said:
Thanks for the help buddy This didn't help either
Click to expand...
Click to collapse
Did the firmware load OK?
ashyx said:
Did the firmware load OK?
Click to expand...
Click to collapse
No, didn't work either. I'm going to get an insurance replacement
Sent from my Pixel XL using Tapatalk
le0.br4zuc4 said:
No, didn't work either. I'm going to get an insurance replacement
Click to expand...
Click to collapse
Are you saying that the full firmware didn't flash either? At what point does it fail?
Anyway don't worry I'll upload the stock AQA3 firmware later.
EDIT: I think this is all you'll need to get booting again. Flash via AP in ODIN.
If not I'll give you the link to the entire firmware.
https://www.androidfilehost.com/?fid=745425885120718683
.
i have the AQA3 as well, which files should i use first to help with this?
rootisthebest said:
i have the AQA3 as well, which files should i use first to help with this?
Click to expand...
Click to collapse
To do what, Root?
youve posted multiple files, i just wanna make sure i flash the right one(s), and can relay my results