Forgot and i dont know where this goes and i cant do nothing im not bricked just cant boot i have bootloops
I did the same thing - so you can use adb to reboot into recovery mode.
So make sure your Xoom is connected to your PC and your in the adb dir and while that honeycomb screen if looping type :
adb reboot recovery
It will boot you back into recovery mode and you can do the wipe.
Did the same. You can power down holding the up vol then when the red moto logo shows press the up vol again and you should get the option of Android Recovery so you can wipe. I did this and all worked fine.
Sent from my Xoom using XDA Premium App
hi guys
i know youll never disappoint me
i have zte blade
as it seems i was in gen1. i rooted the device installed all things and then i tried to flash the Cyanoggen 7.1.0 stable mode.. via CMW recovery by holding vol down (-) and power buttons. i enterd CWM rec.
the rom installed successfuly and then i wipe all data cache and dalvik.
i tried to loading up but nothing from this point there is no option to enter recovery again by vol down + power as before. no option to enter bootloader by holding vol up (+) power buttons. ( i tried even with home button too - doesnt work)
i cant find the combination for fastboot mode (bootloader) and the machine doesnt recognize the device anymore (drivers were installed)
so i cant use command line commands because no adb or fastboot is recognized by computer.
How can I stop the re-loop of the green screen with android pic when device is up... all modes like : vol up + power
and vol down + power
and vol up + home + power
and vol down + home + power... nothing works...
i have no any OS right now because i click format when i were into the CWM recovery the device is dead.. it is looping and looping... etc...
who can help me please??? how can I fix my phone and install the CM7 stable rom??? pleaseeeeeee
You're in the wrong forum here, it should be in 'blade general'
Take the battery out to stop it boot looping. When you put the battery back in you should be able to get back into clockworkmod by holding vol- & power on. Then you can restore your working backup or install a gen1 compatible rom (like ginger stir fry).
Then you can follow the Gen1 to Gen2 TPT upgrade guide here: http://forum.xda-developers.com/showthread.php?t=1258855 & install CyanogenMod 7.
You could also copy the gen1 to gen2 tpt upgrade files using mount usb storage in clockworkmod, or by taking the sdcard out of your phone & using a microsd card reader.
If you flashed the twrp recovery image from http://xiaomitips.com/guide/how-to-flash-twrp-and-root-redmi-3s/ and cant boot into the recovery using vol down + power ( which is basically fastboot ) or the volume + up ( which is just booting into rom )
To boot into your TWRP Recovery or any other recovery that you've installed
1) Power off your phone ( Don't have any cable connected to it )
2) Volume up + Volume down + power button and hold
3) When you see the Mi Logo appear , Let go of ONLY the power button
4) If you've successfully flashed the twrp image on the recovery, you should be entering twrp mode now.
5) Disable dm-verify from advanced settings.
You're done :good::good::good:
The only reason i made this post was for all the android phones i've used, volume down+power button meant going into recovery mode, and not fastboot mode. this was the first phone with different key mechanics and I thought you guys should know as well
TL;DR? Volume up + volume down + power = Recovery
Volume down + power = Fastboot mode always
Volume up + power / Power button = Normal boot
Great information ??
Sent from my Redmi 3S using Tapatalk
Your method works not every time. From time to time its different.
Here is what for me works.
WITH OPEN BOOTLOADER
I flashed TWRP with Fastboot
fastboot flash recovery recovery.img
>>>directly after flashing<<<
1.) Push Vol+ and Vol- and Power at the same time
2.) If you see the MI-Logo release ONLY the Powerbutton and wait
3.) With a little bit luck you are now entering TWRP
4.) If not, do not release Vol+ and Vol-, the Devicescreen went totally black
5.) Do not release Vol+ and Vol- and push now the Power Button
6.) If you see the MI-Logo release ONLY the Powerbutton and wait
7.) Then TWRP starts (for me)
8.) A few times i landed into the chinese menue, then push the recovery button, with a little bit luck you arrive TWRP
9.) If nothing helps, and the device starts normally, imho the process changes twrp back into the original recovery -- then flash twrp again and start from Point 1.)
NOTE!! If you enter TWRP the first time go to Advanced Settings and tap on --Disable DM-Verify-- .
After i disabled DM-Verify and flashed the Xiaomi.eu Rom the above worked for me without every time flashing twrp.
I worked 6 hours at this workaround
irshad2809 said:
Great information
Sent from my Redmi 3S using Tapatalk
Click to expand...
Click to collapse
Glad buddy
Thanks, OP.
Just would like to confirm that disabling DM-Verify option does not make the phone go into Recovery/Bootloader mode via Advanced Power Options menu while the phone is ON.
dixit.sankalp said:
Thanks, OP.
Just would like to confirm that disabling DM-Verify option does not make the phone go into Recovery/Bootloader mode via Advanced Power Options menu while the phone is ON.
Click to expand...
Click to collapse
Just flash this
https://forum.xda-developers.com/xiaomi-redmi-3s/how-to/rebooting-fix-redmi-3s-3s-prime-t3543435
in the latest version of twrp there is no option of disable dm verify
sohailalam said:
in the latest version of twrp there is no option of disable dm verify
Click to expand...
Click to collapse
Its not there. Somebody pls suggest what do we do?
ironfreak said:
Its not there. Somebody pls suggest what do we do?
Click to expand...
Click to collapse
Hello bro you can flash lazy-flasher-noverity-opt it does the same work if you want link then it's here
lazyflasher-no-verity-opt-encrypt.zip | by Darkstar085 for Redmi 3s/Prime
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Hello everyone.
Every time after installing custom ROM i couldn't go to recovery mode using vol up and power key. Any solution plz. Thanks in advance.
You have got to press all three keys to get into recovery: Vol. up + Vol. down + Power
For going recovery pls press all three buttons vol+ vol- and power button
Or you can use advance reboot option in most of the ROM for going to recovery.
For it long press power button
Then select reboot it will give option for recovery soft reboot etc
If there is no advanced reboot option you can download it from Google play & apk name is ' reboot menu widget '
You have to install through ADM tools.
Any ideas on how to access the recovery without the volume up/+ physical button? I need to enter the recovery to flash a new ROM (stock) but the volume up button is gone, when I get to the laying-android-thingy I can't to anything.
If ur fone is in working condition then install some advance reboot app frm play store
Try adb reboot recovery from pc, or just reboot recovery from terminal app