Hi! I have problem with my l3 e400. I accidentally format the mmcblk0 mmcblk0p1 instead. Now the phone will not turn on. No response. mmcblk0 is a device bootloader. Is it possible to restore it homemade? I hurt already two such smartphones.
Have you tried flashing to stock via KDZ?
Sent from my LG-E400 using Tapatalk 2
KDZ does not detect the device, because I can not turn on the download mode or emergency mode. Computer after connecting my smartphone detects a qualcomm hs-usb qdloader 9008. Qpst program can detect it but I do not know how to use it.
The situation is very bad, i know. Had been in my tablet. I sent the service.
Related
Hi,
My phone got bricked while installing and update. The phone i hard bricked it shows no signs of life and does not go to Download or recovery mode. Not by button combination or USB Jig.
When I connect the phone to the laptop it shows qualcomm hs-usb qdloader 9008. Is there any way to rescue the phone and debrick it?
Thanks :crying:
Come on people there should be a solution to this crap
Hi guys! Has anyone been able to connect Nova Plus (MLA-L03) with Qualcomm's QPST?
I have tried everything, including going to Project Menu and enabling Manufacture Mode but I have been unable to get HS-USB driver to show up in device manager. I think its either because incorrect drivers or the port is not enabled on the phone.. Anyone has any experience with with this?
I'm doing this to fix IMEI on my phone. Perhaps there is another way? This phone has been my "lab rat" so I can share what doest work
greetings, do you have the msm_8953_hua.mbn file for to make an firmware flashable via qfil, and i have the testpoint for to enable the edl mode 9008
I just bought LG V20 US996 few day ago, when I use LGUP to restore firmware, it show model of my device H918 (actually is US996) and then I make a big mistake when try to restore with H918 firmware and now my phone can not turn on, can't do anything, when I connect it to PC, in device manager show "qualcomm hs-usb qdloader 9008" COM10, what should can do now ? so bad for me.
tiachop22 said:
I just bought LG V20 US996 few day ago, when I use LGUP to restore firmware, it show model of my device H918 (actually is US996) and then I make a big mistake when try to restore with H918 firmware and now my phone can not turn on, can't do anything, when I connect it to PC, in device manager show "qualcomm hs-usb qdloader 9008" COM10, what should can do now ? so bad for me.
Click to expand...
Click to collapse
i have this same issue. unfortunately the questions and answers section of xda tend to be mostly tumbleweeds.
The only way to fix the 9008 error is to open up the phone and short two pins on the Qualcomm chip to force it into download mode. It is fixable if you don't mind opening your phone...
runningnak3d said:
The only way to fix the 9008 error is to open up the phone and short two pins on the Qualcomm chip to force it into download mode. It is fixable if you don't mind opening your phone...
Click to expand...
Click to collapse
Do you have two pín into download mode ?
Help me! My phone is 9008
When I made that post back in June, I didn't realize that was no longer possible on the SD820.
The only way to fix a 9008 brick on the V20 is either a very expensive piece of hardware, or ship it off to LG.
-- Brian
My Lg Leon can no longer turn on or get to download mode. I was using the LG Flash tools to flash a kdz file and then when it was completed it would not turn on. Doing some further research, I am seeing that the device may be Hard bricked but the device does pick up when I connect it by usb but what comes up is Qualcomm HS-USB QDLoader 9008. I need all the help I can get to get the device up and running without having to bring it back to the manufacturer because I could just purchase another phone.
Any takers??????
So my Nokia 6.1 (TA-1045) randomly bricked and now the phone does not boot up at all. No screen, no sounds, no charging noise.
When I plug it into my Windows PC, the PC does recognize that it is plugged in. However it shows up as "Qualcomm HS-USB QDLoader 9008".
The best resource I could find with a similar issue was this thread, but for the LG 70+ devices. Is there any way for me to fix my bricked phone? Or am i out of luck?
abc617 said:
So my Nokia 6.1 (TA-1045) randomly bricked and now the phone does not boot up at all. No screen, no sounds, no charging noise.
When I plug it into my Windows PC, the PC does recognize that it is plugged in. However it shows up as "Qualcomm HS-USB QDLoader 9008".
The best resource I could find with a similar issue was this thread, but for the LG 70+ devices. Is there any way for me to fix my bricked phone? Or am i out of luck?
Click to expand...
Click to collapse
So if it's showing as qc 9008 mode than it's a good sign.. it means it's going to edl mode.
What you need to do is find a qfil flashable firmware (just google) and flash it on your device through qfil flash software.