Ok, long story short this isn't even my nook it belongs to my girlfriend who wanted CM7 on it. I installed CM7 to an sd card and now for her own reasons she wanted to upgrade to the latest official nook release..
Turns out somewhere along the way I installed CWM on the nook and not just the sd card. So for whatever reason she couldn't upgrade from 1.3 to 1.4. I found a way to upgrade to 1.4 through CWM and thought all was peachy until I found that I put the zip on the nook and booted into CWM. At that point for whatever reason when I tried to search for the zip it said "Sd card not mounted" so naturally I found out how to "mount" the sd card and that didn't work.
A forum post on another forum suggested formatting the /boot section and being the genius I am figured "sure what the heck" and now after rebooting nothing turns on.
It doesn't boot into the nook partition, when I insert the sd card it didn't boot into CM7, I even tried this http://www.androidtablets.net/forum...msd-v3-0-1-0-higher-ext3-ext4-compatible.html and it doesn't turn on now.
Is there any thing I can do at this point? I did let it charge over night and the n on the charger went from orange to green.. so I am hoping it isn't entirely bricked, just don't know what to try now..
*EDIT*
No idea why but it just booted into CWM almost randomly.. disregard this I guess..
I was in CWR and formating system, data and made a mistake and formatted boot. I rebooted and now the NC will not power up. I put in my usd card with eyballer's img on it hoping that life would breath again... not yet. What can I do?
Hoser88 said:
I was in CWR and formating system, data and made a mistake and formatted boot. I rebooted and now the NC will not power up. I put in my usd card with eyballer's img on it hoping that life would breath again... not yet. What can I do?
Click to expand...
Click to collapse
Go through this thread closely... I will bet your nook color is not a brick.
You're Right!
Well, it's back and breathing again. Now back to the original problem I posted here - http://forum.xda-developers.com/showpost.php?p=24118096&postcount=5
I'm now reading about how to use ADB to adjust a boot flag that may be set to always cause the NC to boot to Recovery? Wish me luck.
Hmmm, another CwMR flashed into eMMC issue?
Hate that.
I want to know how to remove CwMR too.
Hello everyone,
Im new to this forum but have lurked for a few years. I consider myself reasonably familiar with android and have installed custom roms on various devices in the past.
Yesterday I installed the latest CM10 Color Nook Rom to an micro SD and on to my wife's Nook Color. Install went great, Wifi up and working and I went to install Gapps via recovery. When it came back on the keyboard kept dying and I realized I had installed too new of Gapps. My bad. I shut off the nook and removed the micro SD with the intentions of wiping it out and starting fresh.
I put the nook off to the side and about 15 mins later went to install my fresh install of JB when I found the nook completely dead and unresponsive. The battery was at about 90% when i turned it off.
This was only supposed to be a install to the sd, I dont know why it's affecting the nook when theres no sd card in it.
So far I have tried:
pulling out the sd card
hard reset
creating a nook color restore micro sd and booting from that
charging
The nook remains completely dead and 100% unresponsive and I have no idea where to go from here! I keep reading its hard to brick these but im starting to think thats what happened!
I was thinking of taking off the cover and doing a battery pull. Any ideas?
If you truly have nothing happening, it certainly sounds like a hardware problem. Pulling battery to reset is worth a try. It's worked for me on several Android devices (never tried it with a Nook, though). Somewhere recently in the forum I read how to do a safe battery pull on a Noo, but don't recollect where. Search for it. If that fails, I'd say your Nook is kaput.
scthomps said:
Hello everyone,
Im new to this forum but have lurked for a few years. I consider myself reasonably familiar with android and have installed custom roms on various devices in the past.
Yesterday I installed the latest CM10 Color Nook Rom to an micro SD and on to my wife's Nook Color. Install went great, Wifi up and working and I went to install Gapps via recovery. When it came back on the keyboard kept dying and I realized I had installed too new of Gapps. My bad. I shut off the nook and removed the micro SD with the intentions of wiping it out and starting fresh.
I put the nook off to the side and about 15 mins later went to install my fresh install of JB when I found the nook completely dead and unresponsive. The battery was at about 90% when i turned it off.
This was only supposed to be a install to the sd, I dont know why it's affecting the nook when theres no sd card in it.
So far I have tried:
pulling out the sd card
hard reset
creating a nook color restore micro sd and booting from that
charging
The nook remains completely dead and 100% unresponsive and I have no idea where to go from here! I keep reading its hard to brick these but im starting to think thats what happened!
I was thinking of taking off the cover and doing a battery pull. Any ideas?
Click to expand...
Click to collapse
No, don't pull the cover. What happened is your boot files got corrupted on internal memory. It will not power on unless those files are there or a valid bootable SD is in the slot.
You need to get my bootable CWM SD from my tips thread linked in my signature. That should boot. Then you need to reinstall whatever ROM you had on internal memory. If it was stock you can get the CWM flashable version also from my tips thread.
Sent from my HD+ running CM10 on SD with XDA Premium
Thanks!
leapinlar said:
No, don't pull the cover. What happened is your boot files got corrupted on internal memory. It will not power on unless those files are there or a valid bootable SD is in the slot.
You need to get my bootable CWM SD from my tips thread linked in my signature. That should boot. Then you need to reinstall whatever ROM you had on internal memory. If it was stock you can get the CWM flashable version also from my tips thread.
Sent from my HD+ running CM10 on SD with XDA Premium
Click to expand...
Click to collapse
Im going to try your linked CWM and create the SD from your tips first. The last I saw the battery it said roughly 80% and assuming it wasn't stuck in some loop it should be still good.
If the battery IS actually dead will the nook charge with no OS installed? My charger cord came apart months ago and I have been charging (slowyly; lol) off a generic cord plugged into the computer. Will this make a difference or should I wait to try this when I have a proper charger cord?
Thanks for everyone's help! You guys are lifesavers!
scthomps said:
Im going to try your linked CWM and create the SD from your tips first. The last I saw the battery it said roughly 80% and assuming it wasn't stuck in some loop it should be still good.
If the battery IS actually dead will the nook charge with no OS installed? My charger cord came apart months ago and I have been charging (slowyly; lol) off a generic cord plugged into the computer. Will this make a difference or should I wait to try this when I have a proper charger cord?
Thanks for everyone's help! You guys are lifesavers!
Click to expand...
Click to collapse
It should charge slowly with that cable. Even if not booted to anything.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
leapinlar said:
It should charge slowly with that cable. Even if not booted to anything.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
Click to expand...
Click to collapse
I followed your instructions and the "battery too low to power on" message came up, which is the first sign of life I have seen out of the nook in a few days. Thanks!
leapinlar said:
No, don't pull the cover. What happened is your boot files got corrupted on internal memory. It will not power on unless those files are there or a valid bootable SD is in the slot.
You need to get my bootable CWM SD from my tips thread linked in my signature. That should boot. Then you need to reinstall whatever ROM you had on internal memory. If it was stock you can get the CWM flashable version also from my tips thread.
Sent from my HD+ running CM10 on SD with XDA Premium
Click to expand...
Click to collapse
My CM10 went completely dead last week. I put lepinlar's v6.0.1.2 Bootable CWM Recovery on and SD card and now have some sign of life.
I get to the cyanoboot universal bootloader screen, but it just sits with a Loading.... note. I've let it sit for about 10 minutes and nothing else happens. I also tried the N key and it does load the boot menu...but no option gets me past that initial screen...
should it just boot directly into CMW? any other suggestions would be appreciated!
ginhead said:
My CM10 went completely dead last week. I put lepinlar's v6.0.1.2 Bootable CWM Recovery on and SD card and now have some sign of life.
I get to the cyanoboot universal bootloader screen, but it just sits with a Loading.... note. I've let it sit for about 10 minutes and nothing else happens. I also tried the N key and it does load the boot menu...but no option gets me past that initial screen...
should it just boot directly into CMW? any other suggestions would be appreciated!
Click to expand...
Click to collapse
Not really sure what you mean. You say you put my bootable CWM on SD. You mean you burned the image to an SD? And it boots to the cyanoboot screen but gets stuck on loading...?
Does the cyanoboot screen have a small s0 in the upper left corner? If does that means it is trying to boot from the SD. It should boot directly into CWM by itself.
Try reburning it or use my 5.5.0.4 version. Once it gets to CWM, install a new ROM with it. The original reason it went dead was corrupted files on your internal boot partition. Reflashing the ROM should fix it.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
Not really sure what you mean. You say you put my bootable CWM on SD. You mean you burned the image to an SD? And it boots to the cyanoboot screen but gets stuck on loading...?
Does the cyanoboot screen have a small s0 in the upper left corner? If does that means it is trying to boot from the SD. It should boot directly into CWM by itself.
Try reburning it or use my 5.5.0.4 version. Once it gets to CWM, install a new ROM with it. The original reason it went dead was corrupted files on your internal boot partition. Reflashing the ROM should fix it.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
thanks for the reply.
I've used Win32diskimager to burn both v6.0.1.2 and 5.5.04 to an SD card. I do see the S0 in the upper left corner, but the screen never moves past the initial Loading...screen.
I can get it to load clockworkmod using a '1gb_clockwork-3.0.1.0' recovery image (also tried 1gb_clockwork-3.2.0.1-eyeballer w/the same result). However, I get a message that states:
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/loginterrrupt
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
I then attempted to flash your Nook Color EMMC Partition Repair zips....The NookColor-emmc-repair-partitions-1-4-5-6-7-8.zip will complete the 'repartitioning /boot /system /data /cache and media' step.
it sticks on the Repartitioning internal memory - be patient this may take a while'...i've let it sit for about 30+ minutes...how long should this take? My nook is currently sitting in this phase now...I guess I'll let it sit for a while and see if anything else happens.
thanks for the help with this...from what I've read, I'm hopeful there is a solution...
ginhead said:
thanks for the reply.
I've used Win32diskimager to burn both v6.0.1.2 and 5.5.04 to an SD card. I do see the S0 in the upper left corner, but the screen never moves past the initial Loading...screen.
I can get it to load clockworkmod using a '1gb_clockwork-3.0.1.0' recovery image (also tried 1gb_clockwork-3.2.0.1-eyeballer w/the same result). However, I get a message that states:
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/loginterrrupt
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
I then attempted to flash your Nook Color EMMC Partition Repair zips....The NookColor-emmc-repair-partitions-1-4-5-6-7-8.zip will complete the 'repartitioning /boot /system /data /cache and media' step.
it sticks on the Repartitioning internal memory - be patient this may take a while'...i've let it sit for about 30+ minutes...how long should this take? My nook is currently sitting in this phase now...I guess I'll let it sit for a while and see if anything else happens.
thanks for the help with this...from what I've read, I'm hopeful there is a solution...
Click to expand...
Click to collapse
Which recovery are you using to flash the repair zips? It needs to be at least 3.2.0.1. Don't use that 3.0.1.0. Don't worry about those E: messages, it just means cache is not formatted.
It is sounding like the first step of the repartitioning is not taking. That is fixing partition one. I'll be right back with another zip to see if you can flash that.
Try the attached and see what happens. You can also try the bootable TWRP to flash rather than CWM. I have that linked in that partition fix thread.
Removed attachment.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
Which recovery are you using to flash the repair zips? It needs to be at least 3.2.0.1. Don't use that 3.0.1.0. Don't worry about those E: messages, it just means cache is not formatted.
It is sounding like the first step of the repartitioning is not taking. That is fixing partition one. I'll be right back with another zip to see if you can flash that.
Try the attached and see what happens. You can also try the bootable TWRP to flash rather than CWM. I have that linked in that partition fix thread.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
thanks a lot!
I did try with the 3.2.0.1 recovery and the flash you posted above. It is still sticking at the 'repartitioning internal memory' step...I also tried your TWRP bootable, but that still sticks at the loading screen.
I can't find my external sd writer, so I've been writing/burning using in internal writer in two different laptops and a camera in mass storage mode. I ordered a SD writer from amazon...should get it on Wednesday. I wonder if my issues are just with writing/burning the SD card..
I'll report back when I get the new writer and guess I might as well try another card too.
ginhead said:
thanks a lot!
I did try with the 3.2.0.1 recovery and the flash you posted above. It is still sticking at the 'repartitioning internal memory' step...I also tried your TWRP bootable, but that still sticks at the loading screen.
I can't find my external sd writer, so I've been writing/burning using in internal writer in two different laptops and a camera in mass storage mode. I ordered a SD writer from amazon...should get it on Wednesday. I wonder if my issues are just with writing/burning the SD card..
I'll report back when I get the new writer and guess I might as well try another card too.
Click to expand...
Click to collapse
It is possible it is the card. It might be good enough to start the boot, but not good enough to read and write the files that are needed. Definitely try a different card.
EDIT: Now that I think about it, I am almost positive that is what is wrong. Try a SanDisk class 4.
Sent from my Nook HD+ running CM10 on Hybrid SD
scthomps, you could get a NC replacement charging cable from ebay, just do a search, it works good for me.
I'm actually running into this problem right now with two different nook color tablets.
One I've had CM10 installed to the EMMC for well over a month without any problems. The other Nook Color I followed the same procedure to install to the EMMC off a bootable SD card.
Regardless of how little or much power the Nook has, it will not even power on unless I have a bootable SD card installed.
Once I get to the menu, I can boot from the internal EMMC without any problems. Not sure what I did to correct the /boot partition on two different Nooks. Least of all one that's been working.
Going to try boot into recovery to see if I can fix whatever corruption got introduced.
phoenix1972 said:
I'm actually running into this problem right now with two different nook color tablets.
One I've had CM10 installed to the EMMC for well over a month without any problems. The other Nook Color I followed the same procedure to install to the EMMC off a bootable SD card.
Regardless of how little or much power the Nook has, it will not even power on unless I have a bootable SD card installed.
Once I get to the menu, I can boot from the internal EMMC without any problems. Not sure what I did to correct the /boot partition on two different Nooks. Least of all one that's been working.
Going to try boot into recovery to see if I can fix whatever corruption got introduced.
Click to expand...
Click to collapse
You need a complete set of boot files on the internal boot partition or it won't even try to turn on by itself without a bootable SD. You don't. It needs MLO, u-boot.bin, uImage and uRamdisk there. You obviously have the MLO or u-boot.bin missing or corrupted because uImage and uRamdisk must be there to boot from the SD menu.
This is all fixable by just flashing your ROM again. Those files all get put back on fresh.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
Which recovery are you using to flash the repair zips? It needs to be at least 3.2.0.1. Don't use that 3.0.1.0. Don't worry about those E: messages, it just means cache is not formatted.
It is sounding like the first step of the repartitioning is not taking. That is fixing partition one. I'll be right back with another zip to see if you can flash that.
Try the attached and see what happens. You can also try the bootable TWRP to flash rather than CWM. I have that linked in that partition fix thread.
Removed attachment.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
Hi leapinlar I think I have the same problem as this guy except its on a Nook HD +, becuase I get that same error message when I boot into a bootable cwm. Can you help me out please?
I have a Nook Color that I've used for some time with CyanogenMod 10.2 with no problems. Last night I was looking at the fixes for Netflix since CM currently has a problem with it, and followed the instructions on XDS for the xposed installer (loading Liquid64's NetflixHackPersist.zip). Things appeared to go fine, and it booted into CM again and I ran the app as instructed. Everything seemed fine up to that point.
But on rebooting, the Nook will not go past the Cyanboot screen. Whether I let it boot by itself, or go to the boot menu and select any of the emmc or SD card options, it just sits there saying it's 'loading xxx' whatever option I've selected and never gets past it. I cannot find a way to force it to boot to the SD card to try anything that way.
I've tried 2 SD cards, reformatted and reburned an 8gb clockwork 3.0.2.8 image to make them bootable...so I don't think it's a card problem.
I'd appreciate some help if anyone knows a way around this. I've had experience with rooting and loading from the SD card, but if it always gets to Cyanoboot and I can't get it to even boot the SD card, I'm stuck. (The 8-reboots trick doesn't seem to work..I've likely reworked too much to still do that.)
Thanks,
JT
jttraverse said:
I have a Nook Color that I've used for some time with CyanogenMod 10.2 with no problems. Last night I was looking at the fixes for Netflix since CM currently has a problem with it, and followed the instructions on XDS for the xposed installer (loading Liquid64's NetflixHackPersist.zip). Things appeared to go fine, and it booted into CM again and I ran the app as instructed. Everything seemed fine up to that point.
But on rebooting, the Nook will not go past the Cyanboot screen. Whether I let it boot by itself, or go to the boot menu and select any of the emmc or SD card options, it just sits there saying it's 'loading xxx' whatever option I've selected and never gets past it. I cannot find a way to force it to boot to the SD card to try anything that way.
I've tried 2 SD cards, reformatted and reburned an 8gb clockwork 3.0.2.8 image to make them bootable...so I don't think it's a card problem.
I'd appreciate some help if anyone knows a way around this. I've had experience with rooting and loading from the SD card, but if it always gets to Cyanoboot and I can't get it to even boot the SD card, I'm stuck. (The 8-reboots trick doesn't seem to work..I've likely reworked too much to still do that.)
Thanks,
JT
Click to expand...
Click to collapse
Try using CWM 6.0.4.7.
hwong96 said:
Try using CWM 6.0.4.7.
Click to expand...
Click to collapse
Hallelujah! I followed your link and (though what I saw suggested trying CWM 5.5.04 for CM 10.2) it WORKED!! It booted to the SD card from Cyanboot, and I had a CM 10.2.1 zip that I was able to install and I'm back in business.
Out of curiosity, is Cyanoboot something unremovable, meaning I can never simply boot straight to an SD card as in the past? It did let me get to the recovery on this SD card, so I guess Cyanoboot was actually working and my problem was something else...but if I simply did a factory reset and wiped everything, would that have removed Cyanoboot as well?
If anyone has suggestions, I'm trying to decide if I'll keep this thing or sell it, so I'm curious what the most fully functional ROM (CM or ?) is considered to be these days, if I didn't put it back to stock?
I've loved this Nook, and only got into the earlier predicament because I thought, if I sold it, a buyer might want to use Netflix...so I was hoping to have it working with a ROM that would please the average Joe user who might hit up Youtube, Netflix, etc.
Thanks for the help!
JT
jttraverse said:
Hallelujah! I followed your link and (though what I saw suggested trying CWM 5.5.04 for CM 10.2) it WORKED!! It booted to the SD card from Cyanboot, and I had a CM 10.2.1 zip that I was able to install and I'm back in business.
Out of curiosity, is Cyanoboot something unremovable, meaning I can never simply boot straight to an SD card as in the past? It did let me get to the recovery on this SD card, so I guess Cyanoboot was actually working and my problem was something else...but if I simply did a factory reset and wiped everything, would that have removed Cyanoboot as well?
If anyone has suggestions, I'm trying to decide if I'll keep this thing or sell it, so I'm curious what the most fully functional ROM (CM or ?) is considered to be these days, if I didn't put it back to stock?
I've loved this Nook, and only got into the earlier predicament because I thought, if I sold it, a buyer might want to use Netflix...so I was hoping to have it working with a ROM that would please the average Joe user who might hit up Youtube, Netflix, etc.
Thanks for the help!
JT
Click to expand...
Click to collapse
If you installed CWM 6.0.4.7 to emmc and want to return to stock go to Leapinlar's tips item A12 on how to return to stock recovery. Or item A15 to flash BN stock recovery using CWM.
http://forum.xda-developers.com/showthread.php?p=25354258#post25354258
Hello!
So, I had CM10 on my Nook Color and was resetting it back to stock and accidentally formatted /boot while trying to format /system in Clockwork Recovery.
My NC won't boot at all. I've tried putting Clockwork Recovery as well as TWRP on an SD Card with the stock nook images but can't even get the nook to boot to SD.
I highly doubt the battery is dead because it was above 80% when this first happened about an hour ago.
I've found some links on what to try but all the download links are old and dead.
What else can I do?
Any/all help is appreciated!
My main goal is to get back to stock 1.4.3
bphillips09 said:
Hello!
So, I had CM10 on my Nook Color and was resetting it back to stock and accidentally formatted /boot while trying to format /system in Clockwork Recovery.
My NC won't boot at all. I've tried putting Clockwork Recovery as well as TWRP on an SD Card with the stock nook images but can't even get the nook to boot to SD.
I highly doubt the battery is dead because it was above 80% when this first happened about an hour ago.
I've found some links on what to try but all the download links are old and dead.
What else can I do?
Any/all help is appreciated!
My main goal is to get back to stock 1.4.3
Click to expand...
Click to collapse
The only way you are going to get it to work is to get it to boot to a bootable SD. It is sometimes difficult to get the SD burned just right to make it boot. See my NC Tips thread linked in my signature and read item A9. Once you get it to boot, follow A15 to get stock back.
Sent from my BN NookHD+ using XDA Premium HD app