Database Users

[TF300TG][Guide] Flashing back the original stock ROM

Hi everyone,
I'm owning A TF300TG model and I recently tried to flash one of the ROMS referrenced on those forums and by doing so I found out that my tablet had lost the 3G features so I had to flash back the Asus stock ROM to get it back.
Since I saw many of you got trouble reinstalling the stock ROM, I decided to write a quick guide on how to do it so everyone could get their tablet fully working again
Note: For the record, when I did the following operations, I already had unlocked the bootloader and installed the CWM recovery.
Disclaimer:
By following this guide, you will have to issue commands that risk to damage (aka. brick) your tablet or at least void your warranty. I won't be responsible for any damage made to your device. You've been warned.
Click to expand...
Click to collapse
Download the stock ROM zip file on Asus website (current version is [WW | TW]_epaduser9_4_4_28_1UpdateLauncher.zip) for the TF300TG tablet. Be sure to download the firmware matching your SKU.
Unzip the downloaded file, you will get another archive called , unzip this one too
You should end up with several file, with one of them called blob
For the next step, you will need to install the Android SDK to get the fastboot utility. If you do not know how to use fastboot, you should take a look at this guide.
Once you have installed fastboot, boot your tablet into fastboot mode (Plugin your tablet on your computer's USB, Hold down Power+VolDown, dont press VolUp when prompted, select the USB icon and press VolUp)
Open a command line terminal and navigate to the folder containing the blob file.
Then type the following command:
fastboot -i 0x0B05 flash system blob
Click to expand...
Click to collapse
For some reason, the transfer seems to fail from time to time, if so, just try again by going back to previous step.
Once the transfer is done and you get that sweet "SUCCESS" printed on your screen, just type the following command to reboot your tablet:
fastboot -i 0x0B05 reboot
Click to expand...
Click to collapse
And there you have ! You are now back to stock ROM with fully working 3G

Thanks a lot for this, I found these instructions on Wolf's thread but wasnt sure it would work with our devices, Thanks for taking the first big step.
Questions.
1. Does this wipe your data?
2. Does CWM still work after?

AFAIK, this will wipe your data, remove CWM and uninstall root. Your device's bootloader will still stay unlocked though.
You will have to flash CWM back using this guide: http://forum.xda-developers.com/showthread.php?t=1668173

Hi, followed the steps but it didnt work for me
Fastboot copies the file but after when it tries to flash it gives an error
sending 'system' (796653 KB)...
OKAY [137.443s]
writing 'system'...
FAILED (remote: ()
finished. total time: 138.477s
The Tab shows
Failed to process command flash:system error(0x170003)
The progress bar is showing under the USB logo with 1% blue, after hold power down I'm back into Onyx Rom
Any Thoughts?

I had the same problem and I just issued the same command a second time and it worked just fine
Try to format your /system (under the mounts and storage option) from CWM and wipe data and cache.

2nd time a charm!
Worked fine the second time i ran the command,
Im back to stock again :good:
I will wait for a 3G friendly Rom before flashing again
Thanks for your help
---------- Post added at 05:59 PM ---------- Previous post was at 05:42 PM ----------
Auliyaa said:
AFAIK, this will wipe your data, remove CWM and uninstall root. Your device's bootloader will still stay unlocked though.
You will have to flash CWM back using this guide: http://forum.xda-developers.com/showthread.php?t=1668173
Click to expand...
Click to collapse
Yip Sends you back to total stock
Stock Recovery
Stock Rom
only thing that sticks is Unlocked Bootloader

Thanks a million. This worked for me as well after 2 tries. Saved my $400!

Thanks heaps for this
I ended up in trouble when I flashed the TF300T firmware by mistake. It kept freezing and rebooting on me after that little stuff up.
Anyhow before I did that I made a backup with CWM, and after I restored it my 3G was gone but everything else worked fine.
Manual updates were failed though and they still do. At least I have my 3G back :victory:
So this method would probably work for upgrading to .40 as well, but it means a complete datawipe!
I'm sure there are many of us in the same boat now. I guess we will just have to wait and hope that some kind person makes a recovery image for the TF300TG?

Auliyaa said:
Hi everyone,
I'm owning A TF300TG model and I recently tried to flash one of the ROMS referrenced on those forums and by doing so I found out that my tablet had lost the 3G features so I had to flash back the Asus stock ROM to get it back.
Since I saw many of you got trouble reinstalling the stock ROM, I decided to write a quick guide on how to do it so everyone could get their tablet fully working again
Note: For the record, when I did the following operations, I already had unlocked the bootloader and installed the CWM recovery.
Download the stock ROM zip file on Asus website (current version is [WW | TW]_epaduser9_4_4_28_1UpdateLauncher.zip) for the TF300TG tablet. Be sure to download the firmware matching your SKU.
Unzip the downloaded file, you will get another archive called , unzip this one too
You should end up with several file, with one of them called blob
For the next step, you will need to install the Android SDK to get the fastboot utility. If you do not know how to use fastboot, you should take a look at this guide.
Once you have installed fastboot, boot your tablet into fastboot mode (Plugin your tablet on your computer's USB, Hold down Power+VolDown, dont press VolUp when prompted, select the USB icon and press VolUp)
Open a command line terminal and navigate to the folder containing the blob file.
Then type the following command:
For some reason, the transfer seems to fail from time to time, if so, just try again by going back to previous step.
Once the transfer is done and you get that sweet "SUCCESS" printed on your screen, just type the following command to reboot your tablet:
And there you have ! You are now back to stock ROM with fully working 3G
Click to expand...
Click to collapse
I got a question, i had problems with the touch since the last update, so i want to go back to the original, so my question is to perform this do i have to have the bootloader unlocked?

Auliyaa said:
Hi everyone,
[*] Once you have installed fastboot, boot your tablet into fastboot mode (Plugin your tablet on your computer's USB, Hold down Power+VolDown, dont press VolUp when prompted, select the USB icon and press VolUp)
Click to expand...
Click to collapse
Hi, any idea why i dont have this 'USB icon' ?? i have 'wipe data' and an android icon that performs a cold boot.

Any idea why this will seemingly flash fine, but go to bootloop when I fastboot -i 0x0b05 reboot the tab?

Don't work for me
Auliyaa said:
Hi everyone,
I'm owning A TF300TG model and I recently tried to flash one of the ROMS referrenced on those forums and by doing so I found out that my tablet had lost the 3G features so I had to flash back the Asus stock ROM to get it back.
Since I saw many of you got trouble reinstalling the stock ROM, I decided to write a quick guide on how to do it so everyone could get their tablet fully working again
Note: For the record, when I did the following operations, I already had unlocked the bootloader and installed the CWM recovery.
Download the stock ROM zip file on Asus website (current version is [WW | TW]_epaduser9_4_4_28_1UpdateLauncher.zip) for the TF300TG tablet. Be sure to download the firmware matching your SKU.
Unzip the downloaded file, you will get another archive called , unzip this one too
You should end up with several file, with one of them called blob
For the next step, you will need to install the Android SDK to get the fastboot utility. If you do not know how to use fastboot, you should take a look at this guide.
Once you have installed fastboot, boot your tablet into fastboot mode (Plugin your tablet on your computer's USB, Hold down Power+VolDown, dont press VolUp when prompted, select the USB icon and press VolUp)
Open a command line terminal and navigate to the folder containing the blob file.
Then type the following command:
For some reason, the transfer seems to fail from time to time, if so, just try again by going back to previous step.
Once the transfer is done and you get that sweet "SUCCESS" printed on your screen, just type the following command to reboot your tablet:
And there you have ! You are now back to stock ROM with fully working 3G
Click to expand...
Click to collapse
Hi, followed the steps but it didnt work for me too
Fastboot copies the file but after when it tries to flash it gives an error
sending 'system' (796581 KB)...
OKAY [129.964s]
writing 'system'...
FAILED (remote: (InvalidState))
finished. total time: 182.134s
The Tab shows
signature mismatch
Can you help me?

hy
i'm having a problem with my tf300t...when i turn it on it shows the asus logo and in the upper left it show device is unlocked...but i can't enter the menu showing rck and the other 3 icons...i really don't know what to do...
then there is another thing...tried to install driver...i get to the part where the tablet is visible, but with the vol up and reset with a pin...it then shuts down and if i try to power it up it dissapears from the device manager...also...if i don't turn it up, the driver can't be installed...i tried every method...please help...
can i retun it to the repair service this way or i will loose my waranty?
sorry if the spelling isn't correct...i don't speak english fluently
waiting a response...thanks in advance

Auliyaa said:
Hi everyone,
I'm owning A TF300TG model and I recently tried to flash one of the ROMS referrenced on those forums and by doing so I found out that my tablet had lost the 3G features so I had to flash back the Asus stock ROM to get it back.
Since I saw many of you got trouble reinstalling the stock ROM, I decided to write a quick guide on how to do it so everyone could get their tablet fully working again
Note: For the record, when I did the following operations, I already had unlocked the bootloader and installed the CWM recovery.
Download the stock ROM zip file on Asus website (current version is [WW | TW]_epaduser9_4_4_28_1UpdateLauncher.zip) for the TF300TG tablet. Be sure to download the firmware matching your SKU.
Unzip the downloaded file, you will get another archive called , unzip this one too
You should end up with several file, with one of them called blob
For the next step, you will need to install the Android SDK to get the fastboot utility. If you do not know how to use fastboot, you should take a look at this guide.
Once you have installed fastboot, boot your tablet into fastboot mode (Plugin your tablet on your computer's USB, Hold down Power+VolDown, dont press VolUp when prompted, select the USB icon and press VolUp)
Open a command line terminal and navigate to the folder containing the blob file.
Then type the following command:
fastboot -i 0x0B05 flash system blob
For some reason, the transfer seems to fail from time to time, if so, just try again by going back to previous step.
Once the transfer is done and you get that sweet "SUCCESS" printed on your screen, just type the following command to reboot your tablet:
And there you have ! You are now back to stock ROM with fully working 3G
Click to expand...
Click to collapse
Using
fastboot -i 0x0B05 flash system blob
Click to expand...
Click to collapse
is a tad wrong. It works, but only by accident.
You should be using
fastboot -i 0x0B05 flash staging blob
Click to expand...
Click to collapse
The technical reason for why your command works, is because the nvidia bootloader writes files to the staging area before writing it to the partition you specify.
What essentially happens is:
Blob is written to staging
Blob is copied to system (meaning non-booting system)
On reboot, blob is "extracted" from staging and properly flashed.
Step 3 is what makes it work in the end, but you are causing an extra unneeded write to the flash (step 2 is not really needed) (In this case it works, but it potentially increases the risk of bricking)

thx didn´t know that. So all the howto´s are wrong

benoitvdh said:
Hi, followed the steps but it didnt work for me too
Fastboot copies the file but after when it tries to flash it gives an error
sending 'system' (796581 KB)...
OKAY [129.964s]
writing 'system'...
FAILED (remote: (InvalidState))
finished. total time: 182.134s
The Tab shows
signature mismatch
Can you help me?
Click to expand...
Click to collapse
Your probably running Jellybean, if so this HOWTO does'nt work.

Question: What exactly is supposed to happen? First I tried it and got the fail and did it a second time and it seemingly worked. In my command prompt it ended with
"writing 'system' ... OKAY"
and wasn't doing anything after that in the command prompt and on the tablet there was a full status bar so it looked like whatever it was doing it was finished? So I held the power button and I think it was a boot loop ... it just was the ASUS screen with the spinning circle. So I just did it again, failed the first time did it again and now I am where I left off. I guess I will wait a while and see if it says "SUCCESS" on my tablet? And if not I will put in the reboot command? (I probably should have tried that last time instead of holding the power button I forgot about the last couple lines of the guide )
EDIT: Or is it cuz I am flashing the wrong SKU? I didn't know what one my tablet is supposed to be ... its a cyanogenmod build so I don't think I cant find what the SKU is supposed to be. I went with US SKU because I live in the United States but I don't know if that's what it is
EDIT2: After waiting a while with no "SUCCESS" Windows said that adb.exe crashed or something. So I put in the reboot command but now it seems to be stuck on the ASUS loading screen again.

Blackdrag said:
Question: What exactly is supposed to happen? First I tried it and got the fail and did it a second time and it seemingly worked. In my command prompt it ended with
"writing 'system' ... OKAY"
and wasn't doing anything after that in the command prompt and on the tablet there was a full status bar so it looked like whatever it was doing it was finished? So I held the power button and I think it was a boot loop ... it just was the ASUS screen with the spinning circle. So I just did it again, failed the first time did it again and now I am where I left off. I guess I will wait a while and see if it says "SUCCESS" on my tablet? And if not I will put in the reboot command? (I probably should have tried that last time instead of holding the power button I forgot about the last couple lines of the guide )
EDIT: Or is it cuz I am flashing the wrong SKU? I didn't know what one my tablet is supposed to be ... its a cyanogenmod build so I don't think I cant find what the SKU is supposed to be. I went with US SKU because I live in the United States but I don't know if that's what it is
EDIT2: After waiting a while with no "SUCCESS" Windows said that adb.exe crashed or something. So I put in the reboot command but now it seems to be stuck on the ASUS loading screen again.
Click to expand...
Click to collapse
I have a WW TF300T and had no problem flashing a US version.. so its no SKU problem how long did you wait on the ASUS screen with the spinning circle? It took up to 5 mins for me! just wait a lil bit longer next time.. And there comes no "SUCCESS" on the tablet! only a blue bar that should be full after SUCCESS comes up in your Fastboot-COMMANDLINE.. the reboot with the fastboot reboot command from the first page..just give your tab a bit more time.. its like a babe. handle it with care :silly:

Success!
Hazaa! I can confirm that I managed to flash back to stock by flashing the blob to the staging partition. Like so many other, the first flash failed but the second time worked. I now have working 3G again!

0nyx7 said:
I have a WW TF300T and had no problem flashing a US version.. so its no SKU problem how long did you wait on the ASUS screen with the spinning circle? It took up to 5 mins for me! just wait a lil bit longer next time.. And there comes no "SUCCESS" on the tablet! only a blue bar that should be full after SUCCESS comes up in your Fastboot-COMMANDLINE.. the reboot with the fastboot reboot command from the first page..just give your tab a bit more time.. its like a babe. handle it with care :silly:
Click to expand...
Click to collapse
Thanks for the reply 0nyx7!
I had waited a while, maybe 10-20 minutes? But I don't remember entirely. I tried flashing the stock firmware a few times but eventually I just gave up. I didn't like the possibility that my tablet was bricked so I just aborted mission and decided to go back to cm10 where it was safe. I just looked up a post on how to flash Clockworkmod Recovery with fasboot and then flashed a cm10 nightly I already had on my internal storage. So all is good... Mostly.

Android 4.3 image errors

Hey guys, I'm currently trying to flash back to the new 4.3 factory image that I downloaded from Google, however, it all goes fine, I flashed the bootloader, flashed the radio and it all says it has been updated properly, then when I try and flash the system.img files and boot.img files they just say no such file or directory exists and stops, meaning the phone is unusable at the moment until I flash something.
Anyone know why this is happening?
BTW I'm using a mac.
Issue fixed, see below!
************************************************************************************************
Ok guys, the problem was solved in an odd way!
I got annoyed with the flashing errors, and flashed the old kernel and radio I was using with my Illusion rom which thankfully got me back to that even though I had lost all of my data (backed up though).
For anyone having this problem and wants to unroot to go back to 4.3 or is trying to flash the legit 4.3 rom from Google and then maybe unroot or just use the 4.3 rom direct from Google...
DOWNLOAD THE LEAKED 4.3 ROM AND FLASH USING STANDARD CWM METHOD.
DOWNLOAD THE .84/.83 KERNEL AND FLASH THIS AS WELL.
After this I got the legitimate OTA update which was only 3.4mb and it even fixed root so I am now back to complete stock, locked bootloader and no root!
Hope this helps
Click to expand...
Click to collapse

Easiest way of flashing the system image is to just use the flash-all script included in the TGZ - just extract it out and run it when the phone is connected in fastboot mode. Personally, I do the following:
1. Extract the entire TGZ (including the update.zip)
2. Move all the IMG files into one folder
3. Rename them to easy names, e.g. bootloader, radio, system, userdata, boot, recovery, etc.
4. Flash them all in turn, rebooting the bootloader each time
5. Once all done, erase/format the cache (fastboot erase cache and fastboot format cache)
6. Boot into recovery and clear cache again and then do a factory reset (this makes sure the unit see all the internal memory)
7. Reboot the phone
Should all work now

siravarice said:
Hey guys, I'm currently trying to flash back to the new 4.3 factory image that I downloaded from Google, however, it all goes fine, I flashed the bootloader, flashed the radio and it all says it has been updated properly, then when I try and flash the system.img files and boot.img files they just say no such file or directory exists and stops, meaning the phone is unusable at the moment until I flash something.
Anyone know why this is happening?
BTW I'm using a mac.
Click to expand...
Click to collapse
Maybe you have corrupted files? Retry the download from google and unpack all with 7zip.
I did that yesterday and all works fine.
4.3 (JWR66V)
https://dl.google.com/dl/android/aosp/occam-jwr66v-factory-08d2b697.tgz
7zip
http://www.7-zip.de/
[HOW-TO] How to flash a factory image / return to stock / unlock / root #
http://forum.xda-developers.com/showthread.php?t=2010312

EddyOS said:
Easiest way of flashing the system image is to just use the flash-all script included in the TGZ - just extract it out and run it when the phone is connected in fastboot mode
Click to expand...
Click to collapse
How would I do that on a mac? I tried typing:
./fastboot flash flash-all.bat
but do I need to use the .sh version?

info.brandenburg said:
Maybe you have corrupted files? Retry the download from google and unpack all with 7zip.
I did that yesterday and all works fine.
Click to expand...
Click to collapse
Did that, same thing happened. I tried flashing the entire .zip and then I tried separately and it still didn't work.

Ok so I know it is just the system.img file that doesn't work, as all the other files have just flashed fine! Going to re-download and see if that helps.

siravarice said:
How would I do that on a mac? I tried typing:
./fastboot flash flash-all.bat
but do I need to use the .sh version?
Click to expand...
Click to collapse
You just run the script, you don't flash it. It's a batch file which then does all the fastboot commands. You also use flash-all.sh as you don't have Windows

EddyOS said:
You just run the script, you don't flash it. It's a batch file which then does all the fastboot commands. You also use flash-all.sh as you don't have Windows
Click to expand...
Click to collapse
Still doesn't work.
I used: bash flash-al.sh
And it just said fastboot not found in certain lines for the command and did nothing. I thought it fixed itself when I swapped USB ports but when it got to the system.img it just gave me the same error again. It flashes everything else ok but not this file, it's the third time I have downloaded it and now I have no way to get it back to being useable as when I press start it just gives me a black screen
HELP PLEASE!

I would but I use Windows and it's all fine. Might be worth downloading the factory image again, checking the md5 and trying to flash the system image again

EddyOS said:
I would but I use Windows and it's all fine. Might be worth downloading the factory image again, checking the md5 and trying to flash the system image again
Click to expand...
Click to collapse
Im trying to install some Samsung Android Drivers on my old laptop but the thing is so slow it's basically impossible to work from now
I've redownloaded the files, I don't know how to check the MD5Sum though. Still nothing doing. I get this error:
checking product... OKAY
checking version-bootloader... OKAY
checking version-baseband... OKAY
sending 'boot' (6166 KB)... OKAY
writing 'boot'... OKAY
sending 'recovery' (6664 KB)... OKAY
writing 'recovery'... OKAY
sending 'system' (531281 KB)... ERROR: usb_write failed with status e00002be
FAILED (data transfer failure (No such file or directory))
edue3e4:4.2unrootnexus4 Simon$
It really doesn't want to write the system.img file, or maybe it doesn't want to write to system?

What happens if you extract the system.img file and flash it via fastboot manually?
fastboot flash system system.img
I always use this guide if I forget:
efrant said:
D. Type in the commands into the command prompt
1) Make sure your computer recognizes your device by typing: fastboot devices
2) Unlock your bootloader (if you have not already done so): fastboot oem unlock
3) You will see a prompt on your device. This will wipe your entire device (including the /sdcard folder). Accept. Note: you use the volume keys to change the option and the power button to accept. You cannot use the touch screen.
4) Reboot by typing: fastboot reboot-bootloader
5) Flash the bootloader: fastboot flash bootloader bootloader-mako-makoz10o.img (or whatever the name of the bootloader image that you downloaded).
6) Reboot: fastboot reboot-bootloader
7) Flash the radio: fastboot flash radio radio-mako-m9615a-cefwmazm-2.0.1700.48.img (or whatever the name is of the radio image that you downloaded).
8) Reboot: fastboot reboot-bootloader
9) Flash the system partition: fastboot flash system system.img
10) Flash the data partition: fastboot flash userdata userdata.img Note: this command will wipe your device (including /sdcard), EVEN if your bootloader is already unlocked. See note 2 below.
11) Flash the kernel/ramdisk: fastboot flash boot boot.img
12) Flash the recovery partition: fastboot flash recovery recovery.img
13) Erase the cache partition: either a) fastboot erase cache OR b) fastboot format cache <<== the second option seems to work better for most people. Thanks joostburg.
14) Reboot: fastboot reboot
15) Done! The first boot will likely take quite a bit longer than you are used to, as Android builds the Dalvik cache.
Now you have a fully stock image on your device. The only thing that is different from out-of-the-box condition is that your bootloader is unlocked. See the notes section at the end of this post for information on re-locking the bootloader.
Note that some users indicate that they can't get past the X on boot. If this happens to you, reboot into the bootloader and select recovery. Then, when you see the Android with the red exclamation mark, hold power and press volume up to take you to the menu. Wipe cache. If that still doesn't work, boot back into recovery and do a factory reset.
If you have a 16GB device, and it now shows up as 8GB, reboot into recovery (hold power and press volume up when you are at the screen with the android and the red exclamation mark), and wipe cache. If that still doesn't work, boot back into recovery and do a factory reset. Or do this
Click to expand...
Click to collapse

EddyOS said:
What happens if you extract the system.img file and flash it via fastboot manually?
fastboot flash system system.img
I always use this guide if I forget:
Click to expand...
Click to collapse
That's exactly what I have been doing, I prefer doing it manually as I don't like using Toolkits and finding a good one for mac is hard enough.
It just says that it cannot send it because the file or directory does not exist, yet if I unplug the phone it does go back into my old rom I was using before that, even though I flashed a new radio and recovery.img, boot.img, user data.img, everything except system.img as it doesn't work

Something clearly wrong with the partition but no idea what...

I know right, I've gone back to the ROM I had previously and downloaded the leaked 4.3 rom and flashed it through flashify. If it works I will simply lock the bootloader again and it should be good to go!

i did the same way through nexus tool kit 2.0 n p.s i guess the file was corrupted that y it failed in the mid. ill try it again

Hmmy 4444 said:
i did the same way through nexus tool kit 2.0 n p.s i guess the file was corrupted that y it failed in the mid. ill try it again
Click to expand...
Click to collapse
Let me know if you get anywhere with it!

it worked.. jst copy the image n dont rename it n go to google nexus 4 toolkit folder n there u would see a folder named *put googlr factory image here* paste it there n before starting ur bootloader must be unlocked.. so thats that.. after that that open the nexus 4 toolkit n then click on number 9 whch says download extract + flash google factore stock rom n then after that type 2 whch says flash google factory image... n thats it. it will automatically flash it.... gv me thanks too
Sent from my Nexus 4 using xda app-developers app

Hi there, same issue with me on a mac
Plus can you tell me how you went back to the previous rom, my phone is unusable right now and i do have a nandroid backup so.

Have either of your tried to flash the 4.2.2 factory image? Would be interested to see if it works
Sent from my Nexus 4 using xda premium

EddyOS said:
Have either of your tried to flash the 4.2.2 factory image? Would be interested to see if it works
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
I dont mind, can you direct me towards a post where they show how to, i m not sure of all this and dont want to mess around with wrong files.
UPDATE: I tried and that works just fine. Rebooted to 4.2.1

Updating to 4.3 Image with fastboot failed.

Hi guys
I was trying to update to 4.3 using fastboot and after finishing i got stuck with the google on the screen. So i went on to try it again, this time installing each .img in the zip manually. While i was sending the System.img the usb connection broke and i tried again to no avail. So i was like lets do this again. So i went i started all over again with erasing boot, now the terminal is stuck on that and not going forward. Im out of options. Really need help, im helpless here. Please.
Thank You

Cantacid said:
Hi guys
I was trying to update to 4.3 using fastboot and after finishing i got stuck with the google on the screen. So i went on to try it again, this time installing each .img in the zip manually. While i was sending the System.img the usb connection broke and i tried again to no avail. So i was like lets do this again. So i went i started all over again with erasing boot, now the terminal is stuck on that and not going forward. Im out of options. Really need help, im helpless here. Please.
Thank You
Click to expand...
Click to collapse
Is that a Mac? There is another thread with a guy having issues flashing system.img using a Mac. Not sure if he was able to fix it or not. He was able to flash all the other images just not system.img.
For reference from Efrant's thread on flashing image files if your phone hangs during first boot try this:
Note that some users indicate that they can't get past the X on boot. If this happens to you, reboot into the bootloader and select recovery. Then, when you see the Android with the red exclamation mark, hold power and press volume up to take you to the menu. Wipe cache. If that still doesn't work, boot back into recovery and do a factory reset.
http://forum.xda-developers.com/showthread.php?t=2010312
I had the boot issue when I first flashed the images and just formatting the cache fixed it for me. I later had to do a factory reset as the phone was reporting the wrong storage size, 8 GB instead of 16 GB and the reset fixed it.
Here is the other guys Mac thread, not sure it will help you or not.
http://forum.xda-developers.com/showthread.php?t=2377647

kzoodroid said:
Is that a Mac? There is another thread with a guy having issues flashing system.img using a Mac. Not sure if he was able to fix it or not. He was able to flash all the other images just not system.img.
For reference from Efrant's thread on flashing image files if your phone hangs during first boot try this:
Note that some users indicate that they can't get past the X on boot. If this happens to you, reboot into the bootloader and select recovery. Then, when you see the Android with the red exclamation mark, hold power and press volume up to take you to the menu. Wipe cache. If that still doesn't work, boot back into recovery and do a factory reset.
http://forum.xda-developers.com/showthread.php?t=2010312
I had the boot issue when I first flashed the images and just formatting the cache fixed it for me. I later had to do a factory reset as the phone was reporting the wrong storage size, 8 GB instead of 16 GB and the reset fixed it.
Here is the other guys Mac thread, not sure it will help you or not.
http://forum.xda-developers.com/showthread.php?t=2377647
Click to expand...
Click to collapse
And the thing about cleaning caches is locking and unlocking bootloader does the same. Tried, i cant install recovery and system .img for some reason.
Thank you for the quick reply, seems the like the guy is having the same issue. Will post it there as well.
The issue is to fastboot the system.img

Cantacid said:
And the thing about cleaning caches is locking and unlocking bootloader does the same. Tried, i cant install recovery and system .img for some reason.
Thank you for the quick reply, seems the like the guy is having the same issue. Will post it there as well.
The issue is to fastboot the system.img
Click to expand...
Click to collapse
I see you are in the other thread too but I will post this here also.
According to this thread when using a Mac you don't flash the system or kernel (boot) images.
http://forum.xda-developers.com/showthread.php?t=2377691

kzoodroid said:
I see you are in the other thread too but I will post this here also.
According to this thread when using a Mac you don't flash the system or kernel (boot) images.
http://forum.xda-developers.com/showthread.php?t=2377691
Click to expand...
Click to collapse
Yeah you do. I just did this on my Mac for my Nexus 4 and Nexus 7 last night with absolutely no issues.
The procedure I used is as follows...
1.1) Download the factory image and ensure all .img files are extracted to the "platform-tools" folder
1.2) Boot phone into fastboot mode by powering it down then holding volume down/power at the same time until the fastboot screen appears
2) Plug the phone into the computer via USB cable
3) Open terminal and type: fastboot devices (if it recognizes your phone's serial number you are ready to move forward)
4) Reboot by typing: fastboot reboot-bootloader (I do this just to test the connection but it's not 100% necessary)
5) Flash the bootloader: fastboot flash bootloader /Users/kevin/Desktop/Android/sdk/platform-tools/bootloader.img
6) Reboot: fastboot reboot-bootloader
7) Flash the radio: fastboot flash radio /Users/kevin/Desktop/Android/sdk/platform-tools/radio.img
8) Reboot: fastboot reboot-bootloader
9) Flash the system partition: fastboot flash system /Users/kevin/Desktop/Android/sdk/platform-tools/system.img
10) Flash the data partition: fastboot flash userdata /Users/kevin/Desktop/Android/sdk/platform-tools/system.img (Note: this command will wipe your device)
11) Flash the kernel/ramdisk: fastboot flash boot /Users/kevin/Desktop/Android/sdk/platform-tools/boot.img
12) Flash the recovery partition: fastboot flash recovery /Users/kevin/Desktop/Android/sdk/platform-tools/recovery.img
13) Erase the cache partition: either a) fastboot erase cache OR b) fastboot format cache <<== (the second option seems to work better for most people and it's what I used)
14) Reboot: fastboot reboot
After completing step 14 your phone should reboot to the initial setup screen. If you follow those steps vigorously you won't have any issues. If it doesn't work you did something wrong and should start over. If it doesn't work on a second try then I'd re-download the system image from HERE again just to be sure the .img files you are ultimately trying to use aren't corrupt somehow.

sn0warmy said:
Yeah you do. I just did this on my Mac for my Nexus 4 and Nexus 7 last night with absolutely no issues.
The procedure I used is as follows...
1.1) Download the factory image and ensure all .img files are extracted to the "platform-tools" folder
1.2) Boot phone into fastboot mode by powering it down then holding volume down/power at the same time until the fastboot screen appears
2) Plug the phone into the computer via USB cable
3) Open terminal and type: fastboot devices (if it recognizes your phone's serial number you are ready to move forward)
4) Reboot by typing: fastboot reboot-bootloader (I do this just to test the connection but it's not 100% necessary)
5) Flash the bootloader: fastboot flash bootloader /Users/kevin/Desktop/Android/sdk/platform-tools/bootloader.img
6) Reboot: fastboot reboot-bootloader
7) Flash the radio: fastboot flash radio /Users/kevin/Desktop/Android/sdk/platform-tools/radio.img
8) Reboot: fastboot reboot-bootloader
9) Flash the system partition: fastboot flash system /Users/kevin/Desktop/Android/sdk/platform-tools/system.img
10) Flash the data partition: fastboot flash userdata /Users/kevin/Desktop/Android/sdk/platform-tools/system.img (Note: this command will wipe your device)
11) Flash the kernel/ramdisk: fastboot flash boot /Users/kevin/Desktop/Android/sdk/platform-tools/boot.img
12) Flash the recovery partition: fastboot flash recovery /Users/kevin/Desktop/Android/sdk/platform-tools/recovery.img
13) Erase the cache partition: either a) fastboot erase cache OR b) fastboot format cache <<== (the second option seems to work better for most people and it's what I used)
14) Reboot: fastboot reboot
After completing step 14 your phone should reboot to the initial setup screen. If you follow those steps vigorously you won't have any issues. If it doesn't work you did something wrong and should start over. If it doesn't work on a second try then I'd re-download the system image from HERE again just to be sure the .img files you are ultimately trying to use aren't corrupt somehow.
Click to expand...
Click to collapse
In the other walk through flash system image and boot image is replaced by "./fastboot update image-occam-jwr66v.zip". This could help those who are having problems flashing the system image file. I've also seen this method used for windows in that all you flash is the bootloader image then the update image and your done.

-w is to clear the userdata, but the problem is its not pushing the system.img on the phone! Tried without -w and yet the same issue! I have restored my previous rom and madea nandroid for 4.2.2 stock! Might go back to that and try updating ota! Can somebody confirm if i have to lock bootloader and lose root to get an update!
I have no clue why the same steps work for 4.2.2 but not 4.3 image files!
Sent from my Nexus 4 using Tapatalk 4 Beta

One thing I don't think anyone has mentioned (which may actually be the core solution to this problem for everyone) is that you need to update your SDK Platform from 17 to 18 and you need to install "Android Support Repository" in order for 4.3 to properly flash. To do this open terminal and paste the path to the "android" executable file found under sdk/tools. My path was:
/Users/kevin/Desktop/Android/sdk/tools/android
After pasting the appropriate path into terminal hit enter. This will open the SDK Manager. Once SDK Manager is open it will ask to update outdated drivers. One of the drivers being updated is SDK Platform. Before hitting the update button scroll down to the 'Extras' folder and check the box next to "Android Support Repository". Now hit the update button.
After doing this, reboot the computer (may or may not be necessary) and try flashing again by following the steps I provided in post #5. Let me know if that solved it.

Well, i may try that! But as if now, went to bootcamp, installed drivers and sideloaded 4.3. I may still try updating sdk, just in case i may neeed to do this again!
Where is this sdk/tools?
Sent from my Nexus 4 using Tapatalk 4 Beta

Cantacid said:
Well, i may try that! But as if now, went to bootcamp, installed drivers and sideloaded 4.3. I may still try updating sdk, just in case i may neeed to do this again!
Where is this sdk/tools?
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
sdk/tools is located wherever you extracted the .zip file to. In my case I just put it all in a parent folder on the desktop called "Android".

Boot loop / blank screen

so I could use some major help! I received my new nexus yesterday and I believe i've already soft-bricked it somehow but I can't seem to recover it. I've read that you should change the APNs from the cingular ones to the new att settings. I did this, and then I rebooted phone, but somehow it got stuck in a boot loop. so i was like S%^T, and all. so like a moron I started messing around in fastboot and I unlocked the bootloader through cmd line. I found this article http://forum.xda-developers.com/showthread.php?t=2010312 which I figured was my best chance for a recovery. I also tried the Nexus Root Toolkit v1.7.1 and told it i was softbricked / bootloop scenario. I've tried loading the twrp, cwrm, stock recoveries, but evertime I try to boot to the screen is on, but blank. i dont get the android with the !..
NOTHING is working!
I think my major problem at this point is i NEED usb debugging enabled, but I cant get into android gui itself to enable this option.
Believe me ANY help is greatly appreciated and I'll but you a pizza and have it delivered to your home...:laugh:

This should be easy, just put your device on bootloader and use this tool, make sure you have the ADB and Fastboot files with it all.
https://developers.google.com/android/nexus/images#occamjwr66y
Sent from my Nexus 4 using Tapatalk 4

Done this also. I used the 4.2.2 files for Mako. Then followed the link instructions that I posted from that link.
1) Make sure your computer recognizes your device by typing: fastboot devices
2) Unlock your bootloader (if you have not already done so): fastboot oem unlock
3) You will see a prompt on your device. This will wipe your entire device (including the /sdcard folder). Accept. Note: you use the volume keys to change the option and the power button to accept. You cannot use the touch screen.
4) Reboot by typing: fastboot reboot-bootloader
5) Flash the bootloader: fastboot flash bootloader bootloader-mako-makoz10o.img (or whatever the name of the bootloader image that you downloaded).
6) Reboot: fastboot reboot-bootloader
7) Flash the radio: fastboot flash radio radio-mako-m9615a-cefwmazm-2.0.1700.48.img (or whatever the name is of the radio image that you downloaded).
8) Reboot: fastboot reboot-bootloader
9) Flash the system partition: fastboot flash system system.img
10) Flash the data partition: fastboot flash userdata userdata.img Note: this command will wipe your device (including /sdcard), EVEN if your bootloader is already unlocked. See note 2 below.
11) Flash the kernel/ramdisk: fastboot flash boot boot.img
12) Flash the recovery partition: fastboot flash recovery recovery.img
13) Erase the cache partition: either a) fastboot erase cache OR b) fastboot format cache <<== the second option seems to work better for most people. Thanks joostburg.
14) Reboot: fastboot reboot
15) Done! The first boot will likely take quite a bit longer than you are used to, as Android builds the Dalvik cache.
At step 8 it doesn't reboot saying it failed and I have to hardboot back into bootloader from every step forward where required. Eventually I can flash all the img files and reboot phone. I'll then see and android logo with a blue rotating sphere and status bar, then reboots. it does this several times then screen goes blank.

evo_guy said:
Done this also. I used the 4.2.2 files for Mako. Then followed the link instructions that I posted from that link.
1) Make sure your computer recognizes your device by typing: fastboot devices
2) Unlock your bootloader (if you have not already done so): fastboot oem unlock
3) You will see a prompt on your device. This will wipe your entire device (including the /sdcard folder). Accept. Note: you use the volume keys to change the option and the power button to accept. You cannot use the touch screen.
4) Reboot by typing: fastboot reboot-bootloader
5) Flash the bootloader: fastboot flash bootloader bootloader-mako-makoz10o.img (or whatever the name of the bootloader image that you downloaded).
6) Reboot: fastboot reboot-bootloader
7) Flash the radio: fastboot flash radio radio-mako-m9615a-cefwmazm-2.0.1700.48.img (or whatever the name is of the radio image that you downloaded).
8) Reboot: fastboot reboot-bootloader
9) Flash the system partition: fastboot flash system system.img
10) Flash the data partition: fastboot flash userdata userdata.img Note: this command will wipe your device (including /sdcard), EVEN if your bootloader is already unlocked. See note 2 below.
11) Flash the kernel/ramdisk: fastboot flash boot boot.img
12) Flash the recovery partition: fastboot flash recovery recovery.img
13) Erase the cache partition: either a) fastboot erase cache OR b) fastboot format cache <<== the second option seems to work better for most people. Thanks joostburg.
14) Reboot: fastboot reboot
15) Done! The first boot will likely take quite a bit longer than you are used to, as Android builds the Dalvik cache.
At step 8 it doesn't reboot saying it failed and I have to hardboot back into bootloader from every step forward where required. Eventually I can flash all the img files and reboot phone. I'll then see and android logo with a blue rotating sphere and status bar, then reboots. it does this several times then screen goes blank.
Click to expand...
Click to collapse
Well I was able to run the "flash-all" batch file with success, no errors or bootloader reboot issues. Phone rebooted again and now I'm suppose to be waiting for Dalvik Cache to rebuild. This is about 10 mins ago though, any ideas how long it takes to do this??

evo_guy said:
Well I was able to run the "flash-all" batch file with success, no errors or bootloader reboot issues. Phone rebooted again and now I'm suppose to be waiting for Dalvik Cache to rebuild. This is about 10 mins ago though, any ideas how long it takes to do this??
Click to expand...
Click to collapse
Should take around 10-15 min. If its taking more than 20 minutes i would suggest going into the bootloader, then into the stock recovery and doing a factory reset from there.

Chromium_ said:
Should take around 10-15 min. If its taking more than 20 minutes i would suggest going into the bootloader, then into the stock recovery and doing a factory reset from there.
Click to expand...
Click to collapse
well screen was blank the entire time. I did see the Google logo but NO nexus logo. i rebooted to bootloader and selected recovery and still was blank......FML

evo_guy said:
well screen was blank the entire time. I did see the Google logo but NO nexus logo. i rebooted to bootloader and selected recovery and still was blank......FML
Click to expand...
Click to collapse
Try flashing the stock images again. http://forum.xda-developers.com/showthread.php?t=2010312

Chromium_ said:
Try flashing the stock images again. http://forum.xda-developers.com/showthread.php?t=2010312
Click to expand...
Click to collapse
no different. just sits at a blank screen, i see the google with the unlocked symbol at bottom which then changes to a blank screen and sits there....
do i have to have USB Debugging enabled to accomplish any of these changes??

evo_guy said:
no different. just sits at a blank screen, i see the google with the unlocked symbol at bottom which then changes to a blank screen and sits there....
do i have to have USB Debugging enabled to accomplish any of these changes??
Click to expand...
Click to collapse
USB Debugging is just really a ADB switch for the OS.
Sent from my Nexus 4 using Tapatalk 4

Help Wiping (or Unlocking) With a Broken Screen

The screen on my Stock unrooted & locked Nexus 6P is completely non-functional (shattered, not displaying anything, likely not responding to touch) and I'd like to wipe it before disposing of it.
I'm able to blindly navigate to the bootloader but I'm having trouble unlocking for the purposes of
Code:
fastboot erase system -w
.
Process
Boot into bootloader then issue the unlock command:
Code:
fastboot flashing unlock
Because I can't see the screen, I'm assuming pressing up or down will select 'Yes' and power will confirm it.
Either way (up+pwr or down+pwr or just pwr) the phone restarts and I let it sit for a while.
I reboot into the bootloader but the unlocked variable returns no.
I figured the closest analog would be to reflash via
Code:
fastboot -w update "image.zip"
, which will wipe userdata and cache - is that sufficient?

Don't worry....just download and install Nexus toolkit or do it manually by downloading Adb fastboot minimal <10mb size.
First, install driver for flashing firmware.
Reboot to bootloader,
Connect to pc,it will make sound if connected.
Now,put system.img to adb minial folder.
Right click and open cmd in adb minimal folder.
Type adb fastboot flash system system.img
Then,in the middle disconnect from pc.since,it will corrupt your system file.Do this for 2-3 times,that is flashing system.img and disconnecting in the middle to insure that system file have corrupted.
Then,at last flash system.img till end to complete.
Voila...you will have a factory reset phone.
I did this trick before selling my galaxy s5 broken display phone.
When buyer put display in front of me,it was factory reset.

Phylum said:
The screen on my Stock unrooted & locked Nexus 6P is completely non-functional (shattered, not displaying anything, likely not responding to touch) and I'd like to wipe it before disposing of it.
I'm able to blindly navigate to the bootloader but I'm having trouble unlocking for the purposes of
Code:
fastboot erase system -w
.
Process
Boot into bootloader then issue the unlock command:
Code:
fastboot flashing unlock
Because I can't see the screen, I'm assuming pressing up or down will select 'Yes' and power will confirm it.
Either way (up+pwr or down+pwr or just pwr) the phone restarts and I let it sit for a while.
I reboot into the bootloader but the unlocked variable returns no.
I figured the closest analog would be to reflash via
Code:
fastboot -w update "image.zip"
, which will wipe userdata and cache - is that sufficient?
Click to expand...
Click to collapse
Run a drill bit through the upper 1/4 of the screen and through the motherboard then dispose.

hawkswind1 said:
Run a drill bit through the upper 1/4 of the screen and through the motherboard then dispose.
Click to expand...
Click to collapse
Lol sounds good to me!
zameer hassan said:
Don't worry....just download and install Nexus toolkit or do it manually by downloading Adb fastboot minimal <10mb size.
First, install driver for flashing firmware.
Reboot to bootloader,
Connect to pc,it will make sound if connected.
Now,put system.img to adb minial folder.
Right click and open cmd in adb minimal folder.
Type adb fastboot flash system system.img
Then,in the middle disconnect from pc.since,it will corrupt your system file.Do this for 2-3 times,that is flashing system.img and disconnecting in the middle to insure that system file have corrupted.
Then,at last flash system.img till end to complete.
Voila...you will have a factory reset phone.
I did this trick before selling my galaxy s5 broken display phone.
When buyer put display in front of me,it was factory reset.
Click to expand...
Click to collapse
Excellent excellent excellent advice - much appreciated.

You need to have USB debugging enabled btw to unlock your phone and issue those fastboot commands.