I have the galaxy falcon 1.0 rom for a500 and got an OTA update if I install will it mess up my root or can I still doOTA updates while rooted?
subnoize soulja said:
I have the galaxy falcon 1.0 rom for a500 and got an OTA update if I install will it mess up my root or can I still doOTA updates while rooted?
Click to expand...
Click to collapse
Short answer, no. You can download the update, but it will fail upon installation.
Would someone help me? I just installed CM10 Jelly bean for Iconia A500 and flashed the corresponding GApss right after. Now I'm stuck on Acer logo and can't go to recovery. Help.
Did you upgrade to the unlocked ICS bootloader first?
Try nvflash, go to the acer a500 development fourm, then search for the rollback from ics thread, read the instructions... you might be able to do it, i'm not too sure, do you have your sbk ? Or your cpuid ?
Sent from my A501 using xda app-developers app
Can u boot into recovery?
Do u have your backup in CWM?
Restore backup and try again after confirming you have the right bootloader.
Also which gapps did you flash? July 26th or any older one?
Sent from my Galaxy Nexus using xda app-developers app
xmond said:
Would someone help me? I just installed CM10 Jelly bean for Iconia A500 and flashed the corresponding GApss right after. Now I'm stuck on Acer logo and can't go to recovery. Help.
Click to expand...
Click to collapse
1. Try asking in the correct JB discussion thread in General. Waydownsouth monitor's that thread so you're more likely to get help relating to his ROM, there.
2. You almost certainly haven't installed the unlocked ICS bootloader. This is a mandatory requirement for CM10. Instructions for this can be found in the dev section.
I am not a noob when it comes to rooting and flashing a custom ROM on Android devices but I am having a hard time returning back to stock on my a500 with a hc boot loader. The reason I want to return back to stock is so I can sell the tablet
If anyone has a step by step guide or a link on how to do his, it would be greatly appreciated
Sent from my Nexus 7 using Tapatalk 2
MysticDeth said:
I am not a noob when it comes to rooting and flashing a custom ROM on Android devices but I am having a hard time returning back to stock on my a500 with a hc boot loader. The reason I want to return back to stock is so I can sell the tablet
If anyone has a step by step guide or a link on how to do his, it would be greatly appreciated
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
this really should be in Q and A but if you're on the honeycomb bootloader just flash the 3.01 buggy.zip and you'll get an OTA updating you to ICS and ics bootloader...make sure to do all the wipes before
http://translate.google.it/translat...o-o-quasi-su-iconia-a500-501-a-48093/&act=url
gears177 said:
this really should be in Q and A but if you're on the honeycomb bootloader just flash the 3.01 buggy.zip and you'll get an OTA updating you to ICS and ics bootloader...make sure to do all the wipes before
Click to expand...
Click to collapse
I just installed the Acer Recovery app and I am on a 3.0.1 hc boot loader...Where would I go to download the buggy.zip file or could I flash a 3.2.1 stock ROM and update via OTA?
Sent from my Nexus 7 using Tapatalk 2
MysticDeth said:
I just installed the Acer Recovery app and I am on a 3.0.1 hc boot loader...Where would I go to download the buggy.zip file or could I flash a 3.2.1 stock ROM and update via OTA?
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
http://translate.googleusercontent....ALkJrhg2JGIJztWbwIzQUc0TDck9QISQvQ#post583435
#44 .... :good:
Hi Guys
Really appreciate some help, Just bought a Galaxy Tab 2 7 inch GT-P3110 today, Im looking to install Jelly Bean and apply root but was wondering the best way to go about it.
Out of the box im on 4.0.3
kernel version 3.08-379370
Build number IML74K.P3110XXALD4
Should I just upgrade with software update over Wi-Fi (JB Update).......and then root device, Or should I flash a downloaded JB rom and root.
Thanks in advance.
pls follow link
gersrt said:
Hi Guys
Really appreciate some help, Just bought a Galaxy Tab 2 7 inch GT-P3110 today, Im looking to install Jelly Bean and apply root but was wondering the best way to go about it.
Out of the box im on 4.0.3
kernel version 3.08-379370
Build number IML74K.P3110XXALD4
Should I just upgrade with software update over Wi-Fi (JB Update).......and then root device, Or should I flash a downloaded JB rom and root.
Thanks in advance.
Click to expand...
Click to collapse
i rooted successfully from
http://www.theandroidsoul.com/one-c...axy-tab-2-7-0-on-leaked-android-4-1-firmware/
gurjit98 said:
i rooted successfully from
http://www.theandroidsoul.com/one-c...axy-tab-2-7-0-on-leaked-android-4-1-firmware/
Click to expand...
Click to collapse
Yes but he has not the 4.1 yet. Read the whole message.
I would make a proper reflash with Odin in 4.1.1 ( the official, from samfirmware for example) and then a flash with wathever rom suits you. If you want to stay vanilla, this rom is nice : http://forum.xda-developers.com/showthread.php?t=2020223
P.S: Oh sorry I see you have P3110. Then i have no advice on the rom to use, do whatever pleases you or you can even root it without flashing a rom.
ASUS Transformer Pad TF300TG Firmware: V10.6.2.3 Only for WW SKU (Android 4.2)
http://dlcdnet.asus.com/pub/ASUS/EeePAD/TF300TG/WW_epad-10_6_2_3-UpdateLauncher.zip
ASUS Transformer Pad TF300TG Firmware: V10.6.2.3 Only for TW SKU (Android 4.2)
http://dlcdnet.asus.com/pub/ASUS/EeePAD/TF300TG/TW_epad-10_6_2_3-UpdateLauncher.zip
ASUS Transformer Pad Kernel Code for Android 4.2 JB OS (V10.6.2.3)
http://dlcdnet.asus.com/pub/ASUS/EeePAD/TF300TG/TF300TG_kernel_10_6_2_3.zip
And the TL?
Jetiman said:
And the TL?
Click to expand...
Click to collapse
Yes TL and 3G
but I can not flash the tg on the tl?
those are 2 different modems
Gesendet mit meinem Galaxy NoteII
Jetiman said:
but I can not flash the tg on the tl?
those are 2 different modems
Gesendet mit meinem Galaxy NoteII
Click to expand...
Click to collapse
You can and its working, updated an got an LTE Connection. Everything is working.
Regards
Robert
at 4.1, the modem driver in the rom TG were not included
German user reported that it went with him
4.2
Android 4.2.1 for TF300TL will be available in the second week of May
BL
Thnx! Any changelogs?
Sent from my Nexus 4 using xda premium
Hello,
I don't know if you are talking about that but Asus France has announced that Android 4.2 will roll out in the next days for the Asus TF300TG.
If someone installs it I would be grateful if he can say if everything is OK after the update.
Go 4.2 tg rom on the tl. Lte modem driver inklusive in tg rom
Gesendet mit meinem Galaxy NoteII
Installed it OTA restored root with OTA root keeper
Everithing works smooth and fine except the calendar widget I can't synchronise with the 4.2 launcher.
I installed the "calendar agenda widget" (nicer and working)
Sent from my ASUS Transformer Pad TF300TG using xda app-developers app
Updated my unlocked TF300TG with second method from this thread and everything went fine. Successfully installed TWRP recovery afterwards (taken from the same thread), and flashed SuperSU update ZIP from here.
PS Stock 10.4.3.7 (WW sku) firmware and TWRP recovery was installed before update.
PPS Be careful! TWRP recovery version mentioned above was intended for TF300T. It seems to work fine on my TF300TG, but flashing it may be not such a good idea.
kykc said:
Updated my unlocked TF300TG with second method from this thread and everything went fine. Successfully installed TWRP recovery afterwards (taken from the same thread), and flashed SuperSU update ZIP from here.
Click to expand...
Click to collapse
I did the same, except I used method 1.
I didn't flash a TWRP recovery yet though. Are you saying that the patched 2.4.4.0 for the TF300T also works on the TF300TG?
I noticed that on the official TWRP page (http://techerrata.com/browse/twrp2/tf300t) there are special 4.2 versions of TWRP 2.4.4.0 and 2.5.0.0, but not for the TF300TG.
MrMagic said:
I did the same, except I used method 1.
I didn't flash a TWRP recovery yet though. Are you saying that the patched 2.4.4.0 for the TF300T also works on the TF300TG?
I noticed that on the official TWRP page (http://techerrata.com/browse/twrp2/tf300t) there are special 4.2 versions of TWRP 2.4.4.0 and 2.5.0.0, but not for the TF300TG.
Click to expand...
Click to collapse
I've noticed absence of 4.2 versions for TG (which is natural, as TG 4.2 firmware was released very recently) and decided to flash TF300T version on my own risk.
Yes, it seems that patched TWRP 2.4.4.0 works fine on my TG. But I've only installed SuperSU update with it, and wasn't tried to backup/restore with it.
Be careful, though. Flashing recovery intended for another model isn't such a good idea, I've been lucky enough not to brick my device, but who knows what may have happened?
kykc said:
I've noticed absence of 4.2 versions for TG (which is natural, as TG 4.2 firmware was released very recently) and decided to flash TF300T version on my own risk.
Yes, it seems that patched TWRP 2.4.4.0 works fine on my TG. But I've only installed SuperSU update with it, and wasn't tried to backup/restore with it.
Be careful, though. Flashing recovery intended for another model isn't such a good idea, I've been lucky enough not to brick my device, but who knows what may have happened?
Click to expand...
Click to collapse
The 4.2 version of TWRP 2.5.0.0 also works just fine here...just flashed it successfully on my device :good:
Twrp 2500 is indeed working good.
----------------------
But after doing the wipe system etc. and then flashing the blob to system with fastboot. I didn' t have any recovery, with vol down power didn't see the old usb icon, good moment to panic for for a while.
Took me a few to realize that the tf300tg boots directly into fastboot and no icon is needed anymore to switch to fastboot. Flashed twrp, flashed the supersu.zip to get root. And all works as it should.
1st thought was not that fast, but after a few hours it is very resposive and even running better then cromi 3.4.6.
Would love to test a cromi 4.2 version with TG-kernel for sure.
Sent from my ASUS Transformer Pad TF300TG using Tapatalk HD
kykc said:
Updated my unlocked TF300TG with second method from this thread and everything went fine. Successfully installed TWRP recovery afterwards (taken from the same thread), and flashed SuperSU update ZIP from here.
Click to expand...
Click to collapse
Hi all,
Please help me with some advice. I looked at above methods to update. But my situation is a bit different.
I have a TF300TG with android 4.1, unlocked BL and Clockwork mod recovery installed (instead of TWRP). I guess that I could use method 3 from the link above, but instead use my Clockwork mod recovery to flash the new firmware correct?
Do I understand correctly that I will lose the Clockwork mod recovery? Will i also loose the unlocked bootloader?
JohandeWit said:
Hi all,
Please help me with some advice. I looked at above methods to update. But my situation is a bit different.
I have a TF300TG with android 4.1, unlocked BL and Clockwork mod recovery installed (instead of TWRP). I guess that I could use method 3 from the link above, but instead use my Clockwork mod recovery to flash the new firmware correct?
Do I understand correctly that I will lose the Clockwork mod recovery? Will i also loose the unlocked bootloader?
Click to expand...
Click to collapse
I just used Fastboot method and all works fine!
Has there been any info regarding the HDMI output issues....is there /will there be a fix?
Sent from my ASUS Transformer Pad TF300TG using Tapatalk HD