went to clockworkmod recovery, i went install zip and choose my custom kernel. then when i reboot my phone, it cant start up and keeps showing the lg sign on the screen until my battery wents flat out. tried it a several times but still could not start up. Plz Help!!!
Hello,
First what is your phone model and what kernel do you flashed?!
Sent from my LG-P700 using Tapatalk 2
bogdan109 said:
Hello,
First what is your phone model and what kernel do you flashed?!
Sent from my LG-P700 using Tapatalk 2
Click to expand...
Click to collapse
lg p700 and overclock kernel. wanted to make my phone faster.
blackcheckers9 said:
lg p700 and overclock kernel. wanted to make my phone faster.
Click to expand...
Click to collapse
link for kernel: http://forum.xda-developers.com/showthread.php?t=2254513
I think you need to flash the stock kernel, or format everything from Advanced on CWM to later flash a kdz
Enviado desde mi LG-E610 usando Tapatalk 4
Enter recovery and Reflash the rom you where using with the original kernel. If you cant charge the battery you can try this but will loose data on sdcard i think...
1 battery off
2 press vol down
3 connect to pc with volum down and realease after some seconds
4 flash kdz and start over.
It loop because u flahs a mod kernel on stock rom
Enviado desde mi LG-P705 usando Tapatalk 2
Prometeo88 said:
Enter recovery and Reflash the rom you where using with the original kernel. If you cant charge the battery you can try this but will loose data on sdcard i think...
1 battery off
2 press vol down
3 connect to pc with volum down and realease after some seconds
4 flash kdz and start over.
It loop because u flahs a mod kernel on stock rom
Enviado desde mi LG-P705 usando Tapatalk 2
Click to expand...
Click to collapse
how to find original kernel??
flash v20e or the rom that you are using!
blackcheckers9 said:
went to clockworkmod recovery, i went install zip and choose my custom kernel. then when i reboot my phone, it cant start up and keeps showing the lg sign on the screen until my battery wents flat out. tried it a several times but still could not start up. Plz Help!!!
Click to expand...
Click to collapse
if u install ROM V10K_00.kdz ROOTED after that u should do this:
• Wipe data / factory Reset, Wipe Cache, ADVANCED > Wipe Dalvik Cache
• Install zip from SD Card > First install: Stock_v10k_Rooted.zip > Yes, Next the WIFI Fix, and then Keyboard.
• Wipe data / factory Reset, Wipe Cache, ADVANCED > Wipe Dalvik Cache
Related
i installed [ROM] FroyoBread by doixanah, the installation was succesful but when i tried to reboot my phone it stuck at android logo.please help!
CM7 bootscreen? Does it animate?
try full wipe and clear cache
sayamanta said:
i installed [ROM] FroyoBread by doixanah, the installation was succesful but when i tried to reboot my phone it stuck at android logo.please help!
Click to expand...
Click to collapse
Sent from my X8 using XDA App
what i do whenever i install a rom:
1. download the rom from the FroyoBread tread
2. copy the .zip file to sd card/xrecovery/backup
3. Reboot into xrecovery
4. make a backup of my current rom
5. once backup has finished do a full wipe, then wipe cache, then wipe dalvik cache and finally battery stats
6. install custom .zip go to where i put the froyobread .zip file and install it
7. repeat stage 5
8. reboot phone
9. leave it for a little while, the first boot always takes a while, then after so long you should go through the boot animation and so on so forth.
hope this might help
Beans
Maybe you have 006 baseband...if yes try to flash the 015 and it will boot...if you do have the 015 and it still doesn't boot I can't help you...
Sent from my X8 using XDA App
malungkot said:
try full wipe and clear cache
Sent from my X8 using XDA App
Click to expand...
Click to collapse
ya as malungkot said, this may help, full wipe and clear cache, i was stuck too, once.
I've tried twice, first time it went blank on boot up and I could only here tge boot sound. The second time it got stuck at the Samsung Galaxy Y logo.... I want this ROM ao bad. My phone has all tge requirements: rooted, has stock kernel etc.... And I follwed EVERY step correctly... What is the problem?
Sent from my GT-S5360 using Tapatalk 2
Mo0s said:
I've tried twice, first time it went blank on boot up and I could only here tge boot sound. The second time it got stuck at the Samsung Galaxy Y logo.... I want this ROM ao bad. My phone has all tge requirements: rooted, has stock kernel etc.... And I follwed EVERY step correctly... What is the problem?
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
Flash Stock ROM via ODIN (Let me know if you dont know what it is)
Put the ROM zip and Clockworkmod in the root of your SD card
Boot into Recovery(Three button combo)
Select apply update
Select the cwm file
Wipe data/factory reset
Wipe cache
Go to advanced
Wipe Dalvik cache
then select install zip from sd card
choose zip from SD card
let it install
Reboot
Report back here
tjsgy said:
Flash Stock ROM via ODIN (Let me know if you dont know what it is)
Put the ROM zip and Clockworkmod in the root of your SD card
Boot into Recovery(Three button combo)
Select apply update
Select the cwm file
Wipe data/factory reset
Wipe cache
Go to advanced
Wipe Dalvik cache
then select install zip from sd card
choose zip from SD card
let it install
Reboot
Report back here
Click to expand...
Click to collapse
Done.... Still stuck the Gakaxy Y logo
Sent from my GT-S5360 using Tapatalk 2
Before wiping data in CWM
Go to mounts and storage>check if "unmount system" is there. If its "mount system" select it and press the centre key which wil turn it to "unmount system".
Also wipe data and cache in stock recovery before going to CWM recovery.
Sent from my GT-S5360 using xda app-developers app
devilrulz4ever said:
Before wiping data in CWM
Go to mounts and storage>check if "unmount system" is there. If its "mount system" select it and press the centre key which wil turn it to "unmount system".
Also wipe data and cache in stock recovery before going to CWM recovery.
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Ok, can you please post an alternative link for the rom. I'm having problems downloading from the Mediafire link
Sent from my GT-S5360 using Tapatalk 2
http://www.mediafire.com/?m3cbyliuiek3cu3
Here was link Dude ...!!
Dont Waste Ur Time In Saying Thanks
Just Press It..!!
Cool.yash17 said:
http://www.mediafire.com/?m3cbyliuiek3cu3
Here was link Dude ...!!
Dont Waste Ur Time In Saying Thanks
Just Press It..!!
Click to expand...
Click to collapse
Does this one work?
Sent from my GT-S5360 using Tapatalk 2
I can flash jellyblast but im one the gt-5360T
can someone please explain how i can keep the autorotation from stock rom when i flash jellyblast
WEAREBORG2913 said:
can someone please explain how i can keep the autorotation from stock rom when i flash jellyblast
Click to expand...
Click to collapse
Auto rotation is already present in Jellyblast rom u can toggle it from status bar easily
funnypharmacist said:
Flash Stock ROM via ODIN (Let me know if you dont know what it is)
Put the ROM zip and Clockworkmod in the root of your SD card
Boot into Recovery(Three button combo)
Select apply update
Select the cwm file
Wipe data/factory reset
Wipe cache
Go to advanced
Wipe Dalvik cache
then select install zip from sd card
choose zip from SD card
let it install
Reboot
Report back here
Click to expand...
Click to collapse
I have the same problem and I followed the instructions on page 1 of the Jellyblast ROM exactly, also this one. After that I tried different ways with different CWM, choose an older version of the rom, reinstall Kuro Kernel after flashing Rom, delete second partition (ext2)... But I always get the bootloop.
Edit:
Solved: I made a stupid mistake. I chose on the download page the Update 5, because i thought it's the full ROM with update 5. Because of the green colour of the ROM download link, i didn't recognize that it's a link.
Ok so lately I have noticed that my Phone is taking way to long to boot. When a normal l7 would normal boot the phone, it should got the the LG logo for about 10 sec and then after that it should go to(in this case the Carbon fiber boot animation) for about 30 sec +
But the problem is with my phone the LG logo takes 2min + till it moves to the Carbon fiber boot animation then about 1 min for the boot of the carbon OS (P.S just a side note, it did it with slim bean and CM and still no luck)
I have also used CWM to clear/F reset everything, but it has not made a difference.
Could anyone help me out here?
Is there a bootloader or kernel i need to flash to fix this? or is it because my CWM may be outdated(Shouldent matter) and again I may of missed somthing in CWM so still point out the basics <--These are just ideas
On another side note the phone is a
-p705
-32GB Micro SD card in it
- cwm 6.0.2.8
-Kernel: 3.4.4--Cr3pT-OC [email protected] #1 Sat Feb 8 04:34:03 EET 2014
-(If any more info is needed, just ask)
Link to carbon ROM: http://forum.xda-developers.com/showthread.php?t=2638321
See if it boots quicker without your microsd card, if it does, then there's your problem. There's a lot of fake/faulty cards being sold on the net.
Otherwise, the LG logo shouldn't be there for 2 min, reflash stock via KDZ.
Sent from my LG-p705 using Tapatalk
BUMP!
Im coming back from the dead, as I have decided to try using my P705 again, and I have tried removing the SD card and still no luck, any help?
can someone give me a link on how I go back to stock so I can start again?
DarkN3ss61 said:
BUMP!
Im coming back from the dead, as I have decided to try using my P705 again, and I have tried removing the SD card and still no luck, any help?
can someone give me a link on how I go back to stock so I can start again?
Click to expand...
Click to collapse
You need kdz updater to go back to stock, also when you get cwm again
flash cwm 6.0.4.9
Sent from my LG-P705
I have just done that and there has been no change in the LG logo time(bootloader) but once it gets to the room logo it's much faster. But still slow on the first half
DarkN3ss61 said:
I have just done that and there has been no change in the LG logo time(bootloader) but once it gets to the room logo it's much faster. But still slow on the first half
Click to expand...
Click to collapse
i have a p705, i have a problem. I cant use any rom thets over 4.1.2
Sent from my LG-P705
Nesh89 said:
i have a p705, i have a problem. I cant use any rom thets over 4.1.2
Sent from my LG-P705
Click to expand...
Click to collapse
how??
Do you have CWM6.0.4.9????
I can't now provide you a link, but type on youtube "LG L7 (root,bootloader,CWM"
Then in description is a link.
Download it and flash it with KDZ.
That is rom for P700 with root, unlocked bootloader and CWM.
Then flash CWM6.0.4.9 for P705
Than download idk cyanhacker or cm11 by imer choose. . bit take care that ypu use rom for P705
Then in updater-script change from P705 to P700,because that (((p700 kdz rom)))
Flash rom, and that's it.
Here is an instructions to flash
Wipe data/factory reset
Wipe cache
Mount system
Format system
Wipe dalvik-cacje
Flash rom
Wipe cache
Wipe dalvik cache
Flash GAPPS
Wipe cache
Wipe dalvik cavhe
Reboot.
Paget96 said:
how??
Do you have CWM6.0.4.9????
I can't now provide you a link, but type on youtube "LG L7 (root,bootloader,CWM"
Then in description is a link.
Download it and flash it with KDZ.
That is rom for P700 with root, unlocked bootloader and CWM.
Then flash CWM6.0.4.9 for P705
Than download idk cyanhacker or cm11 by imer choose. . bit take care that ypu use rom for P705
Then in updater-script change from P705 to P700,because that (((p700 kdz rom)))
Flash rom, and that's it.
Here is an instructions to flash
Wipe data/factory reset
Wipe cache
Mount system
Format system
Wipe dalvik-cacje
Flash rom
Wipe cache
Wipe dalvik cache
Flash GAPPS
Wipe cache
Wipe dalvik cavhe
Reboot.
Click to expand...
Click to collapse
i have cwm 6.0.4.9 i made a few ports and mods my self so i kind of know what im doing,
its a problem with the phone.
Sent from my LG-P705
Nesh89 said:
i have cwm 6.0.4.9 i made a few ports and mods my self so i kind of know what im doing,
its a problem with the phone.
Sent from my LG-P705
Click to expand...
Click to collapse
Ok, but believe me
Try this
Paget96 said:
Ok, but believe me
Try this
Click to expand...
Click to collapse
ok when i find the time il do it
Sent from my LG-P705
i have installed custom recovery and cm10 after 1 month i wiped cache partition but error in recovery cant mount cache partition ......................... etc
i tried to wipe all data and factory reset but error in recovery , i have tried kdz flash tool after it finish flashing phone restart but nothing logo of cm 10 appear and bootloop please help
hisham_karm said:
i have installed custom recovery and cm10 after 1 month i wiped cache partition but error in recovery cant mount cache partition ......................... etc
i tried to wipe all data and factory reset but error in recovery , i have tried kdz flash tool after it finish flashing phone restart but nothing logo of cm 10 appear and bootloop please help
Click to expand...
Click to collapse
Please be more specific, what kdz did you flash? What frameware file did you flash via kdz?
what was the message on your pc when you flashed, do you use windows or Linux based pc? Were you in download mode when you flashed kdz?
Sent from my LG-P705 using XDA Free mobile app
help my phone stuck in bootloop
Nesh89 said:
Please be more specific, what kdz did you flash? What frameware file did you flash via kdz?
what was the message on your pc when you flashed, do you use windows or Linux based pc? Were you in download mode when you flashed kdz?
Sent from my LG-P705 using XDA Free mobile app
Click to expand...
Click to collapse
i flashed V20A_00.kdz i forget the msg that appear its look like counter ....param.. somthing like that after it finish reboot and bootloop (old rom cm10) not accept flash i have sent phone to technical try with box but nothing i use linux based pc and flash rom from vm windows 8.1 32 bit please help me
hisham_karm said:
i flashed V20A_00.kdz i forget the msg that appear its look like counter ....param.. somthing like that after it finish reboot and bootloop (old rom cm10) not accept flash i have sent phone to technical try with box but nothing i use linux based pc and flash rom from vm windows 8.1 32 bit please help me
Click to expand...
Click to collapse
I remember that on my L3,while playing a little with it,i had had some problems,and after flashing my Firmware thru KDZ i had a never ending bootloop.The solution i found was to do a factory reset by pressing volume up and down while phone was booting.After that the bootloop ended and the official firmware booted.
Inviato dal mio LG-E400 con Tapatalk 2
giaki3003 said:
I remember that on my L3,while playing a little with it,i had had some problems,and after flashing my Firmware thru KDZ i had a never ending bootloop.The solution i found was to do a factory reset by pressing volume up and down while phone was booting.After that the bootloop ended and the official firmware booted.
Inviato dal mio LG-E400 con Tapatalk 2
Click to expand...
Click to collapse
yeah i had the same problem and did a factory reset to.
worked just fine
Sent from my LG-P700 using XDA Free mobile app
giaki3003 said:
I remember that on my L3,while playing a little with it,i had had some problems,and after flashing my Firmware thru KDZ i had a never ending bootloop.The solution i found was to do a factory reset by pressing volume up and down while phone was booting.After that the bootloop ended and the official firmware booted.
Inviato dal mio LG-E400 con Tapatalk 2
Click to expand...
Click to collapse
it reboot cm10 logo appear but never start up and recovery cwm give me errors :crying:
hisham_karm said:
it reboot cm10 logo appear but never start up and recovery cwm give me errors :crying:
Click to expand...
Click to collapse
Here is a windows video tutorial on how to properly use kdz, i use a windows pc so im not sure how to fix any errors.
http://m.youtube.com/watch?v=8DcEfvEsbD8
But if you get an error on windows you need to re install the original lg drivers for e610 then go to command prompt and system and to modem then disable lg mobile modem.
Reboot your pc and then run windows enabler, and start kdz.
Again idk how to do this on linux but try to folow the video tutorial and see if it works.
Sent from my LG-P700 using XDA Free mobile app
follow this exactly and step by step!
http://forum.xda-developers.com/showthread.php?t=2405357
Hi!
Does anybody meet flash problem with LG L5 E610 phone?
I have one of this type. A few days ago every app started crashing.
I tried to remove some app but it appears again after reboot.
If I make a new file in the internal memory, it disapears after reboot.
I tried to re-flash the stock rom with KZD updater. It says everything is ok, but when the phone reboots I got the system same as before the flashing.
So nothing changes after I flash the stock rom, I got back my old system.
It looks like flash problem, but I've never met flash problem before this phone.
I have exactly the same problem like in this topic: http://forum.xda-developers.com/optimus-l3-l5-l7/help/lg-l5-e610-strange-issue-t3177536
Any idea to solve this problem?
Thanks.
Try make factory reset and after that you flash the Stock ROM in KDZ Updater.
Enviado do meu LG-E610
Antonio Almeida Filho said:
Try make factory reset and after that you flash the Stock ROM in KDZ Updater.
Enviado do meu LG-E610
Click to expand...
Click to collapse
I tried it, but I got back my old system.
The factory reset starts, but after a few(2-3 seconds) the reboots and I got back my old system.
you tried with stock recovery or cwm recovery?
Enviado do meu LG-E610
I got the same phone from my brother yesterday. Same things happening to me. If I change anything, after restart phone have same settings like before. Cant make soft or hard reset.... and I have problem with pc connection...
Antonio Almeida Filho said:
you tried with stock recovery or cwm recovery?
Enviado do meu LG-E610
Click to expand...
Click to collapse
Stock recovery. I used kdz updater to flash the original firmware to the phone.
danyy27 said:
Stock recovery. I used kdz updater to flash the original firmware to the phone.
Click to expand...
Click to collapse
Install CWM or TWRP. Look for a custom ROM and flash it.
You can try my ROM or try to official CM10.
Official CM10
My ROM