Related
Hello All,
I want install the BaseBand EPU93_U_00.59.01 on my Defy for star to unlock it, I have the EPU93_U_00.59.00 dhgt, If I am not wrong, just need put the baseband zip file on SdCard and reboot in recovery mode and install from SdCard ?
But I can only installing update.zip file from my sdcard and chose an other file ? like the picture, and I test to rename the BaseBand file to update file but not work ?
View attachment 1378400
where is my error pls ?
Best Regards,
Pedroleroi.
u need to root and use baseband switcher app
Sent from my MB526 using xda premium
Please ask all questions in Q&A. Thread moved there.
tks to all, there is the picture of my recovery mode :
View attachment 1379991
and I forget to give the information, but sure my phone is rooted,
@ nogoodusername
can you give me more information or link pls ?
Best Regards,
Pedroleroi.
if you want to flash a zip you have to reboot into custom recovery. you are in stock recovery.
if you didn't install cwm, you have to do that first. a start would be to read the beginners guide. (sticky in general section). good luck.
@ measel
can you give me more information pls ?
Best Regards,
Pedroleroi.
Read this for educational purposes (it explains about flashing, rooting and so on...):
ALLINONEBEGINERSGUIDE: http://forum.xda-developers.com/showthread.php?t=1216982
WIKI: http://forum.xda-developers.com/wiki/Motorola_Defy
especially here: http://forum.xda-developers.com/wik...rt_the_2ndinitdefy_bootloader.2Frecovery_menu
There you will most probably figure out how to install zips and stuff.
Baseband switching is an advanced task I'd say.
Things you probalby have to do first:
root > install 2ndinit > flash your zip and hope it's compatible
Good luck.
use defy baseband switcher
randolph2 said:
use defy baseband switcher
Click to expand...
Click to collapse
Does that work on stock roms as well? I don't think so.
Not everyone has CM or any other custom rom installed...
Hi guys! I have similar problem on my Defy+ (bl7), on every custom ROM I can make calls or use data for couple of hours, and then it suddenly stops. Only reboot helps, but not always. I tried switching basebands with bb switcher, not helping, also checked APN settings, tried flashing again and again and nothing helps.
Only thing i haven't tried is changing baseband version, from EPU93_U_00.60.00 (on custom ROM) to EPU93_U_00.60.03 (which i have on stock). But i have no idea how to do it! Any guesses?
Btw I'm from Croatia, mobile company VIP
Tnx
Hi!, I would like to ask for your help guys I'm planning to flash my SAMSUNG N900L Galaxy Note 3 could anyone help me what to flash? and what not to? Thanks :angel:
macoyism said:
Hi!, I would like to ask for your help guys I'm planning to flash my SAMSUNG N900L Galaxy Note 3 could anyone help me what to flash? and what not to? Thanks :angel:
Click to expand...
Click to collapse
1. You can download the latest firmware for your device: HERE. Follow the pics attached (The download is slow like a turtle but be patient).
2. These firmware package is one package. Download, unzip it and flash it then using odin tool to brush into the radio PDA. Lil GUIDE: HERE.
hi sir here's my phone details i'm a noob
is the firmware here?
Model Number: SM-N900L
Android Version: 4.4.2
Baseband version: N900LKLUFNK1
Kernel Version: 3.4.0-3171410 [email protected] #1
Build Number: KOT49H.N900LKLUFNK1
SE for Android Status: Enforcing SEPF_SM-N900L_4.4.2_0033
macoyism said:
hi sir here's my phone details i'm a noob
is the firmware here?
Model Number: SM-N900L
Android Version: 4.4.2
Baseband version: N900LKLUFNK1
Kernel Version: 3.4.0-3171410 [email protected] #1
Build Number: KOT49H.N900LKLUFNK1
SE for Android Status: Enforcing SEPF_SM-N900L_4.4.2_0033
Click to expand...
Click to collapse
Seems all ok. Why you don't update your phone via OTA?
I'm going to try flashing it using Arya Mod v1.7 what kernel should I use ?
n900p
I have the same basebank k1..... did this stock work perfect...
Un-bricked Galaxy Note 3 (SM-N900L) on KitKat 4.4.2 - N900LKLUFNK1:
* Download link: http://youtu.be/FGoqxX3BwA0
* Flash by ODIN 3.07 or up
* Based on Official Firmware N900LKLUFNK1
* Android version KitKat 4.4.2
* Rooted by SuperSU 2.45
* KNOX Removed
* Fixed all Korean:
- Removed Korean characters on Dial Pad
- Add (+) sign for International call on (0) Dial Pad
- Removed all Korean apps
- Fixed Network Mode (2G/3G/LTE/Auto)
- 90 languages + ASOP for EUROPE
* Facebook::https://www.facebook.com/pages/Galaxy-Note-3-LTE/749184655174799
macoyism said:
hi sir here's my phone details i'm a noob
is the firmware here?
Model Number: SM-N900L
Android Version: 4.4.2
Baseband version: N900LKLUFNK1
Kernel Version: 3.4.0-3171410 [email protected] #1
Build Number: KOT49H.N900LKLUFNK1
SE for Android Status: Enforcing SEPF_SM-N900L_4.4.2_0033
Click to expand...
Click to collapse
User wants $ 25 for the password to the archive...
Don't join XDA if you wanted to get Paid... Trust me.. you will get nothing
Regards
macoyism said:
Hi!, I would like to ask for your help guys I'm planning to flash my SAMSUNG N900L Galaxy Note 3 could anyone help me what to flash? and what not to? Thanks :angel:
Click to expand...
Click to collapse
Same problem with me.I have the same korean varient with LG u+ logo. I am using it in Pakistan. Read almost every thread regarding korean variants but there is'nt any method specific for SM-N900L.
So are you wanting to flash a custom recovery e.g. twrp and then install a custom rom?
Sorry if I misunderstood your question.
Chris
Hokage-Sama said:
Same problem with me.I have the same korean varient with LG u+ logo. I am using it in Pakistan. Read almost every thread regarding korean variants but there is'nt any method specific for SM-N900L.
Click to expand...
Click to collapse
Hello, new here and was trying to do the same thing on my SM-N900L unit, i want to install a custom ROM so i can remove all of those korean apps and fix the API for my network.
cmro said:
So are you wanting to flash a custom recovery e.g. twrp and then install a custom rom?
Sorry if I misunderstood your question.
Chris
Click to expand...
Click to collapse
Hello Chris,
same here, if anyone can post some procedure on how we can install custom firware and rom on our SM-N900L unit that is under Lollipop.
thanks a lot
ab.normal said:
Hello, new here and was trying to do the same thing on my SM-N900L unit, i want to install a custom ROM so i can remove all of those korean apps and fix the API for my network.
Hello Chris,
same here, if anyone can post some procedure on how we can install custom firware and rom on our SM-N900L unit that is under Lollipop.
thanks a lot
Click to expand...
Click to collapse
Do you have a custom recovery and is your mobile rooted?
Hokage-Sama said:
Do you have a custom recovery and is your mobile rooted?
Click to expand...
Click to collapse
Hello Hokage-Sama,
i think the custom recovery installed is TWRP
did some further searching online and i was able to restore the firmware from lollipop down to kitkat, from there i was able to download a md5 file which i ran from Odin and i was able to root the phone however, its based on kitkat and im still searching if there are any for lollipop and the only one i see if the 1 poser who asks for a $25 payment to update a N900L to N9005.
... was hoping if i can use Aryamod custom rom but i think my phone should be on a rooted lollipop under N9005 model only.
hope this made sense
thank you
Root is not required to install a custom rom.
If your phone can run 9005 ROMs, you could try editing the updater script to include your phone.
audit13 said:
Root is not required to install a custom rom.
If your phone can run 9005 ROMs, you could try editing the updater script to include your phone.
Click to expand...
Click to collapse
hi, thanks for the reply
apologies i dont know what you meant to edit hte updater script.
Sorry i have a N900L and based on reading some other threads only
DarkLord Note 5 RC2.1 or Phronesis v5.1 will work on my unit.
before installing the rom i should have a custom recovery right? but to get a custom recovery my bootloader needs to be unlocked first.
i am currently stuck on unlocking my bootloader, i downloaded samsung usb drivers, go to recovery mode, then insert the usb on the phone, i hear a sound when you connect a device on the pc and saying that the device is ready to use but i am unable to see the contents of my phone.
am i doing it correctly?
thank you once again
Are you sure the phone's bootloader is locked? If the bootloader is not locked, do not use any unlocking apps because this will proably brick the phone.
Just install TWRP from Odin. I don't recommend Philz Touch or CWM as I don't they have been updated for a while.
http://forum.xda-developers.com/gal...ecovery-twrp-materialized-dark-light-t3153614
audit13 said:
Are you sure the phone's bootloader is locked? If the bootloader is not locked, do not use any unlocking apps because this will proably brick the phone.
Just install TWRP from Odin. I don't recommend Philz Touch or CWM as I don't they have been updated for a while.
http://forum.xda-developers.com/gal...ecovery-twrp-materialized-dark-light-t3153614
Click to expand...
Click to collapse
i tried the twrp custom recovery based on the link you sent above thru Odin, it messed up my custom recovery, when i tried to go there it said something like unable to load recovery and goes to download mode and the phone wont startup normally.
is that a sign that my bootloader is locked since i cant install the custom recovery?
used my standard backup recovery to bring back the phone.
i wonder how other SM-N900L users installed their roms.
any other help would be greatly appreciated
thanks a lot
When you flashed twrp, did Odin say the installation was successful?
Download the tar version of twrp for your device from here: twrp.me .
In Odin, do not check anything except f.reset time. Flash twrp and, when you see the word "reset" in the status window, remove the USB cable from the phone, remove the battery, wait 5 seconds, replace battery, now use button combination to boot into recovery.
thanks for the help, was finally able to install twrp custom recovery. the latest version wont work on SM-N900L, i used TWRP-2.8.6.0-N900S version and it worked! im now running on Darklord N5 custom rom for Note3 and loving it!!!
Dear frndz few month back i have installed the ozcan rom on my GS4,
last month i have installed official lollipop but it was not good and stable so i have downgrade it to kitkat 4.4.2 and again install ozcan rom but now when installation complete then
NO NETWORK AND UNKNOW BASEBAND
problem face.
kindly help me how can i fix this issue,
1) i have flash this rom 4, 5 times
2) change the recovery software
3) try ozcan previous version
but every time fail to fix the issue.
https://m.youtube.com/watch?v=LgPEIeXDPNA
Try this, it worked for me.
http://forum.xda-developers.com/showthread.php?t=3036258
Here have a look.
Sent from my GT-I9500 using XDA Free mobile app
hi everyone I lost on my way recevery s4 i9505 ... I can flash a rom but not do not wipes.donc to finish the precise install.je the motherboard 2 weeks but I can not return because no garantie.exuser me for translation (I'm french lol ... ) thank you for your help
The phone's model # is gt-i9505? Which ROM are you trying to install?
audit13 said:
The phone's model # is gt-i9505? Which ROM are you trying to install?
Click to expand...
Click to collapse
Hi yes my phone's model is gt-i9505 and I try to install several official ROM which lolippop 5.0.1 I try multiple files that method 4 + files pit , trying to find the latest firmware on SamFirm.A whenever the install went well but not finalize the operation with a wipe because no recovery mode .
Hello,
I have a N9005 that I'm tryin to install a custom ROM (I have another one already with Norma v29 working perfectly). In this one I flashed the original 5.0 firware and then tried to root, isntall custom recover, custom rom, etc., as I normally do. With this phone I can root and install custom recovery but every custom ROM i tried I always have a bootloop on Galaxy Note 3 screen (tried Norma, Phonesis, etc.).
I can reflash to an original ROM but don't understand why it doesn't work with a custom ROM.
Can any one help me? I even tried to change bootloader on a specfific tutorial for Norma v29.
Thank you in advance!
Boot to download mode and check the model first .
Is this a used phone ??
Hello. Yes is a used phone. The model is a SM-9005. The roms I'm using are for this model. I tried again a Lolipop 5.0 stock rom, then root, then recovery (until here everything works). Then applied Norma V29 and i'm stuck again at the Galaxy Note 3 screen, the blue led starts to blink and then the phone restarts. Really can't understand. Even tried the same memory card from my Note. Well the only difference is that one is 16GB and this one is 32GB. Any stock rom work perfectly but didn't want to use them.
Can it be that the internal memory size is causing the issue? is the only difference....can someone help?
Well my original phone is a 32GB. Don't know why the hell I was thinking 16GB... so most weired. If someone could help will be great. It's working with the stock 5.0 and rooted with CM-AUTO.
before flashing custom firmware you should enter the recovey and make complete format for both cache and data partitions.
after the firmware install it might take the system up to 10 minutes to boot.
Thank you for the answer. i'm doing all the steps (I changed roms on Note 3 for some time now). This one startups on the Galaxy Note 3 Screen, the led starts to blink (like 4-5 times) and restarts himself. So is not waiting time. made factory resets, all the wipes, even a script I found for fixing EFS. When I flash a Android 4.4 or 5.0 stock from SamMobile just works.
hi note 3 users
I'm new here i trying to install twrp in my n9005 odin give me pass the flashing but when my phone restart i press power + volume up + home button my phone go to stock recovery im try also with philz but same result can somebody help me
** when i download twrp give me 2 choice... American OR Europe what the correct version for my n9005 im leaving in Saudi Arabia
and i use the original cable usb 3 or i can use the normal Samsung usb cable
THANKS
adel alsayed said:
hi note 3 users
I'm new here i trying to install twrp in my n9005 odin give me pass the flashing but when my phone restart i press power + volume up + home button my phone go to stock recovery im try also with philz but same result can somebody help me
** when i download twrp give me 2 choice... American OR Europe what the correct version for my n9005 im leaving in Saudi Arabia
and i use the original cable usb 3 or i can use the normal Samsung usb cable
THANKS
Click to expand...
Click to collapse
hala adel, recheck the twrp version you downloaded is for 9005? check the md5 of your download..
9005 is the international version so its europe, US phones are different..
hope it helps, I can't think of anything else.. read in twrp for note 3 thread also
Dan0v said:
hala adel, recheck the twrp version you downloaded is for 9005? check the md5 of your download..
9005 is the international version so its europe, US phones are different..
hope it helps, I can't think of anything else.. read in twrp for note 3 thread also
Click to expand...
Click to collapse
twrp is ok but i cant install nt ux 9.7 rom by twrp give me faild ... pleas hellllllp
adel alsayed said:
twrp is ok but i cant install nt ux 9.7 rom by twrp give me faild ... pleas hellllllp
Click to expand...
Click to collapse
Suggests you are using the wrong TWRP version .
Read the roms instructions/ search thread .
use TWRP version 2.8.7.0.
Most custom roms do not support v 3.x.x.x
golalmo said:
use TWRP version 2.8.7.0.
Most custom roms do not support v 3.x.x.x
Click to expand...
Click to collapse
i use it already but given faild my phone is n90005 32 gb I don't know what can I do for install ux 9.7 rom
Does any other rom install ??
JJEgan said:
Does any other rom install ??
Click to expand...
Click to collapse
Yes i can install ... Phronesis Rom as a normal install only facing faild and zip corrupt in UX9.7 ROM
adel alsayed said:
Yes i can install ... Phronesis Rom as a normal install only facing faild and zip corrupt in UX9.7 ROM
Click to expand...
Click to collapse
then check the md5 of magma nx9.7..!
read the how to install in tge magma rom.. sometimes something small will interrupt the flashing
fabio.teles said:
Hello,
I have a N9005...
Click to expand...
Click to collapse
I thought I'd clean up the phone.
I installed via ODIN official fw = Lollipop.
Then root + TWRP 3.1.1.
Next installing custom rom RR 7.1.
ERROR
I resolved as follows:
Installing "CP_N9005XXUGBPB1_MODEM.tar" + "BL_N9005XXUGBPB2_BOOTLOADER.tar"
Now RR installation is successful!
But "not SIM" (can not enter PIN)
Solution:
Override file "libsec-ril.so". Here is: Root / System / lib / libsec-ril.so
Done - it works!
Files here: https://ulozto.cz/!M6PZA7EKQHNe/xda-zip
It helped me. Will it help you too?
*******
Thanks @"Anon_Help_You" !!!
(https://forum.xda-developers.com/galaxy-note-3/help/solution-lineage-os-sim-t3640689)