Hello. To avoid bothering everyone with another brick story, long story short:
My L5 is bricked, and it appears in the device manager as some qualcomm device. No emergency mode, nothing. cant power on the device, but as soon as I plug it in the computer, it shows as the forementioned device.
Can anyone provide with a QPST bin file? Any suggestions will be gladly accepted.
ncitrus the
shameless self bump
Related
i tried to update via LGMobile Support Tool but it stuck at 4% and i pull out the usb ... and my phone didn't opened anymore since then(black screen)... i think is bricked...i tried to connect in emergency mode without battery and volum key but nothing ... the pc sees " LGE android platform USB serial port (com5)" in device manager, but when i try to update with KDZ_FW_UPD it says that the phone isn't connected...
any ideas would be helpfull... thx
last option will be jtag in an authorized service...
L.E. I've tried with B2CAppSetup and pc recognize my device as p705 with software v20b but i can't do anything ...
I have the same EXACT problem! The 4% thing happened to me too. But in my case I own a LG Optimus L5 (very similar).
So far, no solution. I did, however, found some light in a post in cyanogenmod forums. I can't post the link, but search for "Hard Brick - To Hell And Back - Guide To Recovery".
Using that software we should be able to rewrite the firmware. Please, take a look, we can pull this off if we help each other.
The problem is that the firmware of the LG Optimus L5/L7 does not contains the same filenames requested by the software, so I'm stuck there.
Last resource: using the "riff box jtag", but it's expensive (for me) and I have to buy it abroad, since I'm from Argentina.
Did you managed something else?
dont worry try again install stock firmware on LG support tool, dont worry if it stops on 4% i had this too, maybe after 10 min it will load 5% and then no stops anymore.
sorry for bad english
The problem is that LG Support tool won't recognize my phone anymore it won't even turn on.
So I bought this secondhand G2 and it said on the cover it's D802T (Australia Model) while inside it was D802 (International). For sake of generosity I tried to flash it with D802T .kdz file and got it bricked, when I opened the back cover it was D801 model (Freaky right?).
So basically I'm stuck with:
1. LG BootLoop with constant waving Blue and Green LED
2. Download Mode - Turns on but doesn't get detected by Computer (using Windows 10 and trust me Windows 7/8 didn't detect it either)
3. Vol Down + Power takes me to Factory Reset cuz no recovery installed
4 LG BootLoop detected as (LGE AndroidNet) driver on device manager
I've tried the following methods for it's recovery:
1. Tried another .kdz but failed since download mode doesn't detect
2. Tried .tot method in LGE AndroidNet mode (COM41) using "BIN_LGD802AT-00-V10b-SEA-XX-SEP-04-2013-32G+0.tot" stock but it gives some Failed to Read model error
3. Tried LG Support Tool (B2CAppSetup) to download online stock but it asks for Serial No. and I don't have the IMEI because the back casing seems to be replaced by some other phone
The repair center puts up the lame excuse that the charging port is faulty thats why Download Mode is not being detected but that cannot be mode lame cuz that port was the reason it got into Download Mode Duh.
I'm a student and in my place buying phone is basically as expensive as buying a car and even though it's secondhand, it got bricked not 24 hours after I bought it and the shopkeeper won't take it back cuz he says it's my fault I wanted to be generous and try original roms, so I'm sitting in shivers and trembles here.
Any help would be greatly appreciated.
Note: If this threat has been discussed already please send me the link to it cuz I couldn't find any. And please try not to feed me anger by asking if I re-installed drivers or did I try another computer or did I try adb or fastboot method cuz if you're experienced enough, you'd already know those considerations would've been taken and been failed to help so far. Thank you and please help.
Hi all, let me start by saying i apologise if this is the wrong section!!
I am running (sort of...) an lg g4 h815, rooted, but at the moment im stuck, so hoping to find info here
The phone at the moment is hard bricked and doesnt respond at all with/without battery, plugged into pc. No light, no download, and no recovery mode - litterally a brick..... i have opened up phone thinking that if i can get it to power up at all, i might be able to recover data or possibly even flash new files over to recover.
Pc dosent see it, not listed as adb device
What im asking really is, is there any way to just power up the internals so as its recognised my pc?? Even if that means connecting components on logicboard?
Any advice tutorial would be greatly appreciated as in its current state have not alot to loose
Xda has always come up trumps in the past
Thank you all on advance!
I Use Flashfire App And Install N9005XXUGBOB6 Wrong Firmware After Install Firmware My Device Hard brick No Downloade Mode And No Recovery Mode No Power Up My Device Connect Pc Show HS USB QDLOADER 9008 Plz Help How To Recover My Device
GALAXY 12345 said:
I Use Flashfire App And Install N9005XXUGBOB6 Wrong Firmware After Install Firmware My Device Hard brick No Downloade Mode And No Recovery Mode No Power Up My Device Connect Pc Show HS USB QDLOADER 9008 Plz Help How To Recover My Device
Click to expand...
Click to collapse
The N9005 is an Exynos SOC chip. The VZW Note3 (SM-N900V) uses a completely different SOC - a Qualcomm 8974.
What you did got a similar result as to what you might expect if you flashed the firmware from a digital camera - or a vacuum cleaner - on to your phone. 100% certainty of disaster.
Take it in to a Verizon store and see if they can do anything. Don't explain anything at all about what you did; just say "I don't know what happened - it won't boot up, but something still happens when I connect it to a PC". Try to be very nice. Maybe even so nice that you (carefully) offer a bribe if you manage to talk to a tech.
Do this even if you are not a Verizon customer. The worst they can do is tell you "No, GTFO".
Desperate times call for desperate measures, and you are in a desperate situation.
PS: please report back as to what the outcome is.
.
Recover My Device with Jtag????
i bricked my redmi note7.
AND i have DEEP/ENGINEER FLASH CABLE. Bought it from store.
BUT in pc, it is not recoigen as 9008 while connected... of course i pressed only THE deep flash cable button
now, if i am missing anything, plz provide... (drivers?)
I HAVE ALSO A IMPORTANT QUESTION
--- suppose, my device got inturrouption, while FLASHING. so, that means - my device is dead? or I CAN BRING IT BACK TO LIFE WHENEVER (multiple) I WANTED BY @Deep FLASH [email protected]
somebody PLZ REPLAY fast & IF YOU KNOW ABOUT THESE STUFF!