what's the differences between cm7 for defy and defyplus?
Can defyplus used the defy-cm7?
that not the same battery and the kernel is adapted for that
Defy builds uses froyo kernel whereas defy + builds uses gingerbread kernel. to install defy versions on defy +, you need to install bl6 group and flash, however battery may not charge tohundred percent. The defy + builds can be used by defy red lens and regular defy +. Green lens defy will have problems with camera if we flash defy + bulls, green bread mod may work on few roms.
I'm having defy red lens and using cm72 defy + builds with Walter 4.5.3-109 kernel which gives best battery life.
Sent from my MB526 using XDA App
premaca said:
Defy builds uses froyo kernel whereas defy + builds uses gingerbread kernel. to install defy versions on defy +, you need to install bl6 group and flash, however battery may not charge tohundred percent. The defy + builds can be used by defy red lens and regular defy +. Green lens defy will have problems with camera if we flash defy + bulls, green bread mod may work on few roms.
I'm having defy red lens and using cm72 defy + builds with Walter 4.5.3-109 kernel which gives best battery life.
Sent from my MB526 using XDA App
Click to expand...
Click to collapse
which sbf you used?
I flashed the DEFYPLUS_U3_4.5.1-134_DFP-132 O2.en.DE with CM7 and cannt boot up with the Walter 4.5.3-109 kernel (and any other kernel ).
I can only used the 4.5.1-134_DFP-132 kernel .
sorry for my poor english!
If you have *redlens* defy you can flash Quarx CM72 builds with walter kernel. The 4.5.3-109 kernel gives good battery life which you can use with 0316 builds. FOr ealier releases this kernel will give bootloop (this issue Quarx fixed from 0316 onwards) so you flash 4.5.2.109-dht_22 kernel.
The build can get from http://quarx2k.ru/cm7-nightly-defy+/ you can install CM9 kernel for it boot. Later you can change the kernel for better battery life.
The walter kernels are attached down - which you can flash via CWM.
premaca said:
If you have *redlens* defy you can flash Quarx CM72 builds with walter kernel. The 4.5.3-109 kernel gives good battery life which you can use with 0316 builds. FOr ealier releases this kernel will give bootloop (this issue Quarx fixed from 0316 onwards) so you flash 4.5.2.109-dht_22 kernel.
The build can get from http://quarx2k.ru/cm7-nightly-defy+/ you can install CM9 kernel for it boot. Later you can change the kernel for better battery life.
The walter kernels are attached down - which you can flash via CWM.
Click to expand...
Click to collapse
Thanks！
I flashed the chinese bl=6 2.2sbf
then I can use the 4.5.3-109-11 kernel with cm7.
By the way which build is better between Quarx and Epsylon3 's.
Iam using Quarx 's 0314 now,it's great work.
And I was told that Epsylon will release the cm7 RC1 this week end.
which one would you preferred???
jekyllove said:
Thanks！
I flashed the chinese bl=6 2.2sbf
then I can use the 4.5.3-109-11 kernel with cm7.
By the way which build is better between Quarx and Epsylon3 's.
Iam using Quarx 's 0314 now,it's great work.
And I was told that Epsylon will release the cm7 RC1 this week end.
which one would you preferred???
Click to expand...
Click to collapse
Well, quarx epsylon and maniac have different private builds.all of them have same base with little differences. You can use any of them, they will finalize and merge to stable when it's released.I use quarx cm72 defy + builds.
Sent from my MB526 using XDA App
premaca said:
Well, quarx epsylon and maniac have different private builds.all of them have same base with little differences. You can use any of them, they will finalize and merge to stable when it's released.I use quarx cm72 defy + builds.
Sent from my MB526 using XDA App
Click to expand...
Click to collapse
THANKS!!!!!!!!!
stuck on boot logo
premaca said:
If you have *redlens* defy you can flash Quarx CM72 builds with walter kernel. The 4.5.3-109 kernel gives good battery life which you can use with 0316 builds. FOr ealier releases this kernel will give bootloop (this issue Quarx fixed from 0316 onwards) so you flash 4.5.2.109-dht_22 kernel.
you can install CM9 kernel for it boot. Later you can change the kernel for better battery life.
The walter kernels are attached down - which you can flash via CWM.
Click to expand...
Click to collapse
Hya, I know I am a n00b, but we all have to start . I must be doing something stoopid, as I am stuck at Motorola boot logo.
I have a defy red lenses (confirmed both visual and with log analyzer).
I have installed CM9 kernel, and I can boot latest defy+ quarx rom (30-30)no problem, but once I install 4.5.3 kernel, I am stuck at the big red M.
Also, when I boot CM9 signed kernel, returns 2.6.32.9...isn't this Froyo? Shouldn't be Gingerbread? I must be doing something obviously wrong, but I cannot find anything in the forums....
Which one is it cm9 build or cm72 build? I guess cm9 binaries not updated, anyway Try installing dht22 kernel, cm9 is GB kennel only don't get confused by looking at 2.6...
Sent from my MB526 using XDA App
premaca said:
Which one is it cm9 build or cm72 build? I guess cm9 binaries not updated, anyway Try installing dht22 kernel, cm9 is GB kennel only don't get confused by looking at 2.6...
Sent from my MB526 using XDA App
Click to expand...
Click to collapse
Sorry, gave for granted I was talking about CM9.
I attach screenshot of the about page with Rom, Android & Kernel detail...maybe I am searching for something that is not there (already there?), and I am already as high I can go? Thx for the help!
for an error i flash the GB kernel (only for red lens users) but my phone was a Defy+...what kernel should i install now for flash the last cm10 from Quarkx?
please help me :|
where i can find original kernel of defy+
Gloaming said:
where i can find original kernel of defy+
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=29170886
you mean that the kernel is ok?
Gloaming said:
you mean that the kernel is ok?
Click to expand...
Click to collapse
Yes, use the Defy+ CM10 build
LeonardoJegigzem said:
Yes, use the Defy+ CM10 build
Click to expand...
Click to collapse
ok, but after that, my battery can't charging over 82%...how can i solve this problem?
thank you for your help
how can i install ramdisk to my defy?
currently i am running on 4.1.2 build by quarx with v4 build
mohan vinay said:
how can i install ramdisk to my defy?
currently i am running on 4.1.2 build by quarx with v4 build
Click to expand...
Click to collapse
its not needed in the v4 update
.zip
mohan vinay said:
how can i install ramdisk to my defy?
currently i am running on 4.1.2 build by quarx with v4 build
Click to expand...
Click to collapse
U need to find .zip file with it and install via recovery, but you don't need it after v4 update.
Which kernel should I flash ?
nathan96 said:
Which kernel should I flash ?
Click to expand...
Click to collapse
10.2 is JSS
Franco has a JSS kernel that works great.
bilago said:
10.2 is JSS
Franco has a JSS kernel that works great.
Click to expand...
Click to collapse
Thank you !
I've seen few new kernels for CM but
Is there any fully stable modded kernel that allows :
undervolting
and
underclocking
and is available for for CM10.2 and CM11.
hellscore for both cm´s.
ak also is great however the dev removed all < 4.4 downloads, so you can only use it in cm11
It was never removed (Hells-core repository):
http://d-h.st/users/hellsgod/?fld_id=13048#files
http://android.h0st.to/?dir=nexus4/kernel/hells-Core
Thanks for effort but I expected more:
http://forum.xda-developers.com/nexus-4/development/kernel-aufas-kernel-v10-kernel-3-4-76-t2576201
http://forum.xda-developers.com/nexus-4/development/franco-cm11-kernel-t2606180
http://forum.xda-developers.com/nexus-4/development/kernel-pandan-kernel-semaphore-based-t2597377
and latest ziddleys seems to be stable!
http://forum.xda-developers.com/nexus-4/development/unofficial-cm-compatible-franco-faux-t2487246
mathorv said:
It was never removed (Hells-core repository):
http://d-h.st/users/hellsgod/?fld_id=13048#files
http://android.h0st.to/?dir=nexus4/kernel/hells-Core
Thanks for effort but I expected more:
http://forum.xda-developers.com/nexus-4/development/kernel-aufas-kernel-v10-kernel-3-4-76-t2576201
http://forum.xda-developers.com/nexus-4/development/franco-cm11-kernel-t2606180
http://forum.xda-developers.com/nexus-4/development/kernel-pandan-kernel-semaphore-based-t2597377
and latest ziddleys seems to be stable!
http://forum.xda-developers.com/nexus-4/development/unofficial-cm-compatible-franco-faux-t2487246
Click to expand...
Click to collapse
never said hells removed his
AK Did
opssemnik said:
never said hells removed his
AK Did
Click to expand...
Click to collapse
You meant Aufa's Kernel?
nope, i really mean ak
http://forum.xda-developers.com/nexus-4/orig-development/kernel-ak-t2473454