[Q] CM Updater stopped working error - Nook Color Q&A, Help & Troubleshooting

I have a Nook Color running CM 10 on SD card. It has been working great until recently. Now it pops up with the message "Unfortunately CM updater has stopped working". Any ideas what is causing this and how do I fix it?

I keep getting the same message...I'm on the same platform.

equinecpa said:
I keep getting the same message...I'm on the same platform.
Click to expand...
Click to collapse
Well I think I got it figured out. You need to go to Settings, then About Tablet, then CM Updates, then Check for Updates. Change this to Manual. I did that and I have not had a pop up message since. Mine was set to check weekly.

Related

Installing new voicemail update

I keep trying to install the new voicemail application, but everytime I try to install it, it says Application not installed. Anyone else having this problem?
Nobody can help?
I'm having the same issue too
hmmm i didnt even know about this update until i read this thread.
i just went there and updated it no problem.
i would suggest making sure you are on 3g and not wifi. i am stock unrooted froyo'ed.
Updated w/o problem on Myn's 2.2 rom.
The update is pretty much voice to text service it seems. (Paid service after 1 month trial btw).
Mine just updated fine.
myn's warmtwopointtwo stock kernel
Still not working, and the icon in the notification bar won't go away. Worked fine on my girlfriends evo, both running fresh.
Not working here either.
fmedina2 said:
Still not working, and the icon in the notification bar won't go away. Worked fine on my girlfriends evo, both running fresh.
Click to expand...
Click to collapse
Maybe delete the download and re-download it. See if that helps.
animal7296 said:
Maybe delete the download and re-download it. See if that helps.
Click to expand...
Click to collapse
I am not sure where the app got downloaded to though.
No problem upgrading for me thanks for the notice.
Wipe the data in applications under settings
snandlal said:
Wipe the data in applications under settings
Click to expand...
Click to collapse
That got rid of the notification, but its still not installing. It either says A general failure has occurred, or application not installed.
updated fine on virus airborne 3.1
fmedina2 said:
That got rid of the notification, but its still not installing. It either says A general failure has occurred, or application not installed.
Click to expand...
Click to collapse
It got rid of the notification for like 10 minutes and it came back. This sucks might have to do a freaking nandroid restore just to get rid of this.
If your rooted, replace the SprintVVM.apk in / system/app with the one provided, change permissions to the same as all the other apps and reboot
Upgraded fine on stock 3.30 base deodexed version... I like how it said it was a mandatory update but didn't let me know there was one until I manually checked
Sent from my Super EVO!!
snandlal said:
If your rooted, replace the SprintVVM.apk in / system/app with the one provided, change permissions to the same as all the other apps and reboot
Click to expand...
Click to collapse
Tried. Still got 'application not installed' error.
Deleted the old voicemail app. Now I cant install the new or the old one. Getting the same error on both. Im royally screwed...
Btw, the "Mandatory" new update wont allow you to disable notifications like the previous versions, so if you want have some un-read voicemails sitting around, you're stuck looking at a notification icon forever.

[Q] Hbo Go and Max Go Error

Hi everybody Just installed Kang's rom after using stock for a really long time and loving it but my Hbo go and max go apps seem to be having a issue. They start up fine and I can login and select anything but when it tries to play I get a error stating "a rollback to the system clock has been detected. Please correct the date & time in order to continue playing the content." I have checked all settings and they are good time and date are correct I have tried reflashing but no go. Anyone have any ideas?
I have Phiremod 7.1 and am having the same issues with HBO Go, Anyone have any suggestions?
Has anyone found a solution to this error. I am getting the same thing on my gtablet running beastly/clemsyn combo
hazyspartan said:
Hi everybody Just installed Kang's rom after using stock for a really long time and loving it but my Hbo go and max go apps seem to be having a issue. They start up fine and I can login and select anything but when it tries to play I get a error stating "a rollback to the system clock has been detected. Please correct the date & time in order to continue playing the content." I have checked all settings and they are good time and date are correct I have tried reflashing but no go. Anyone have any ideas?
Click to expand...
Click to collapse
cyberphr33k said:
I have Phiremod 7.1 and am having the same issues with HBO Go, Anyone have any suggestions?
Click to expand...
Click to collapse
hammcastle said:
Has anyone found a solution to this error. I am getting the same thing on my gtablet running beastly/clemsyn combo
Click to expand...
Click to collapse
Try running my IMEI Generator... thread is in my signature.
This issue was one of the causes of us to come up with an IMEI "workaround" in the first place.
I am running HBO Go and Max Go on the latest Mirage release with no problems. I watched Game of Thrones two nights ago, in fact. I have not used an IMEI generator. I am running clocksync, but I'd be surprised if that's the issue.
I was having this issue om my touchpad running cm9...i corrected by simply going into the date/time settings and unchecking box next to "automatic date&time" and then rechecking it and app worked without error

[Q] CM10 fails after update

Hi,
First time posting here. I've been searching around but I can't seem to find anyone with this issue. Which means I'm likely making a rookie mistake.
I've been running CM7 for a while now w/o issue. Decided to look into the state of ICS and found out JB is where it's at. So I decided to give it a whirl based on some successful posts about it, even at an early stage. I used a 8GB SD and on my latest attempt, I loaded cm-10-20121204-NIGHTLY-encore and gapps-jb-20121011-signed onto EMMC. Afterwards, it booted up fine, got connected to the wifi and looked great. Somewhere along the way, something happens that causes Android to popup a dialog saying it's updating. After that's done, soon after I get a popup that "Unfortunately, Gmail has stopped working." When I open a browser, it immediately closes. If I try the Play store, it pops up, "Network error - retry". So it's like a part of the android comm "stack" gets busted on that update. Weird thing is that if I run the Google search app, it returns results from the web, so some connectivity is still there. But when I click a link, the browser pops up for an instant then closes again. I tried clearing caches, doing resets, reflashing gapps, etc. Nothing seems to work. Is there a log I can activate to maybe get more details?
I've probably tried out 5 installs now, using various recently nightly's up until 1204 w/similar results. I just can't figure out what triggers the update. I even tried w/o installing gapps. In that case, I sent myself a link to the Amazon android app, using the email setup. It installed and I could get apps downloaded and running w/o issue. But eventually after a reboot, android updated and I was right back at the gmail failed mesg, even though I hadn't installed gapps. On another try, I had installed and when I reformatted the SD card, it updated after the reboot and same result.
So, I guess I just don't have a clue at this point as to why this update runs, nor do I know what it changes to break the device. After going rounds w/it for about a week or so, I gave up and reloaded my old 7 image. I'm willing to try again if anyone has a clue what I can do.
Thanks
elmo7 said:
Hi,
First time posting here. I've been searching around but I can't seem to find anyone with this issue. Which means I'm likely making a rookie mistake.
I've been running CM7 for a while now w/o issue. Decided to look into the state of ICS and found out JB is where it's at. So I decided to give it a whirl based on some successful posts about it, even at an early stage. I used a 8GB SD and on my latest attempt, I loaded cm-10-20121204-NIGHTLY-encore and gapps-jb-20121011-signed onto EMMC. Afterwards, it booted up fine, got connected to the wifi and looked great. Somewhere along the way, something happens that causes Android to popup a dialog saying it's updating. After that's done, soon after I get a popup that "Unfortunately, Gmail has stopped working." When I open a browser, it immediately closes. If I try the Play store, it pops up, "Network error - retry". So it's like a part of the android comm "stack" gets busted on that update. Weird thing is that if I run the Google search app, it returns results from the web, so some connectivity is still there. But when I click a link, the browser pops up for an instant then closes again. I tried clearing caches, doing resets, reflashing gapps, etc. Nothing seems to work. Is there a log I can activate to maybe get more details?
I've probably tried out 5 installs now, using various recently nightly's up until 1204 w/similar results. I just can't figure out what triggers the update. I even tried w/o installing gapps. In that case, I sent myself a link to the Amazon android app, using the email setup. It installed and I could get apps downloaded and running w/o issue. But eventually after a reboot, android updated and I was right back at the gmail failed mesg, even though I hadn't installed gapps. On another try, I had installed and when I reformatted the SD card, it updated after the reboot and same result.
So, I guess I just don't have a clue at this point as to why this update runs, nor do I know what it changes to break the device. After going rounds w/it for about a week or so, I gave up and reloaded my old 7 image. I'm willing to try again if anyone has a clue what I can do.
Thanks
Click to expand...
Click to collapse
Did you do a factory reset with recovery before you booted into CM10? It sounds like you have some old apps like Gmail staying on there. Coming from CM7 you really need to wipe first.
Sent from my Nook HD+ using Tapatalk
leapinlar said:
Did you do a factory reset with recovery before you booted into CM10? It sounds like you have some old apps like Gmail staying on there. Coming from CM7 you really need to wipe first.
Sent from my Nook HD+ using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply.
CM7 was installed to SD only. CM10 was installed direct to the EMMC.
elmo7 said:
Thanks for the reply.
CM7 was installed to SD only. CM10 was installed direct to the EMMC.
Click to expand...
Click to collapse
What was installed on emmc before? Did you wipe that? You might want to use my format 567 zip on my tips thread linked in my signature.
Sent from my Nook HD+ using Tapatalk
leapinlar said:
What was installed on emmc before? Did you wipe that? You might want to use my format 567 zip on my tips thread linked in my signature.
Sent from my Nook HD+ using Tapatalk
Click to expand...
Click to collapse
B&N stock, whatever ver that was about a year or so ago. I'll check out the 567.
Thanks

[Q] Unfortunately, the process com.android.phone has stopped

Sorry if this is in the wrong place but I've looked everywhere for an answer and i cannot find one,
I have a rooted Nexus 4 with Franco Kernel and Xylon ROM on giffgaff
Whenever i receive a call i cannot answer it because this message shows up and i have to click 'OK' which hangs up, also at the end of outbound calls it shows this message.
This message only occurs when i call/ get called.
I have tried clearing the data from 'Phone' with no avail, also updated my ROM and Kernel. I have reset my Mobile Networks/Access Point Names to default but still this problem occurs. I will be grateful if anyone help and fixes this, Thanks
Hi, I had this problem too and searching around I found a solution that fixed this problem twice for me:
Go to settings -> applications -> all and go to Phone. Clear data & clear cache. Do the same thing with Phone/Messaging Storage apk. You will loose your contacts but it fixed it.
I have my phone contacts sync with my google account so in 10 secs my address book was back and no more "process" problem.
Apparently some kind of corrupted contact causes this, so every time the phone tries to access your contacts and match the phone number, the process crashes.
I hope this helps.
Best,
Ive cleared the Phone data but Phone/Messaging Storage is all blanked out so i cannot click on it? :/ Any ideas?
Jonno13452 said:
Ive cleared the Phone data but Phone/Messaging Storage is all blanked out so i cannot click on it? :/ Any ideas?
Click to expand...
Click to collapse
Were you able to clear your address book? In the end it seems that is what fixes it. Try to delete all your contacts and reboot. Than you can tell if it helps. As far as I know, the next option is to factory reset. That's what I did the first time I got the error, but later it came back because of some bad contact. And if you do that test it by calling yourself from another phone before adding contacts.
mamar said:
Were you able to clear your address book? In the end it seems that is what fixes it. Try to delete all your contacts and reboot. Than you can tell if it helps. As far as I know, the next option is to factory reset. That's what I did the first time I got the error, but later it came back because of some bad contact. And if you do that test it by calling yourself from another phone before adding contacts.
Click to expand...
Click to collapse
I have cleared all my contacts manually and rebooted the phone but still it comes up with the message, Im thinking that i need to clear the data from Phone/Message Storage but i probably clicked force stop on it before and i need to 'Start' it again.
I would just factory reset and flash the rom again.
Honestly i havent got a clue what happened but i did a factory reset and my custom Kernel and ROM were still there and i tried calling myself and it fixed it, somehow :/ Thanks guys
Jonno13452 said:
Sorry if this is in the wrong place but I've looked everywhere for an answer and i cannot find one,
I have a rooted Nexus 4 with Franco Kernel and Xylon ROM on giffgaff
Whenever i receive a call i cannot answer it because this message shows up and i have to click 'OK' which hangs up, also at the end of outbound calls it shows this message.
This message only occurs when i call/ get called.
I have tried clearing the data from 'Phone' with no avail, also updated my ROM and Kernel. I have reset my Mobile Networks/Access Point Names to default but still this problem occurs. I will be grateful if anyone help and fixes this, Thanks
Click to expand...
Click to collapse
Redownload and reflash the ROM including Gapps, if it still doesn't work then try a different ROM. Make sure you re-download the ROM though, since you may be getting this error due to corruption that occurred when it was downloaded.
Edit:
Oh you fixed it. Never mind.
There's a chance my error started because I flashed the. 33 radio after the ROM and gapps. The correct way is first the radio, than RoM, than gapps. I don't know if that's your case, but be aware of that.
have this occasionally on cm10.1 flashing different nightlies.
mamar said:
Hi, I had this problem too and searching around I found a solution that fixed this problem twice for me:
Go to settings -> applications -> all and go to Phone. Clear data & clear cache. Do the same thing with Phone/Messaging Storage apk. You will loose your contacts but it fixed it.
Click to expand...
Click to collapse
I have the same problem which is "unfortunately the process com.android.phone has stopped". I hardly can reach settings -> applications -> all and go to Phone because of the error popping up but when I press it, it display another error behind the first one says: "unfortunately the process com.android.settings has stopped"
Any suggestions ??
Eklado said:
I have the same problem which is "unfortunately the process com.android.phone has stopped". I hardly can reach settings -> applications -> all and go to Phone because of the error popping up but when I press it, it display another error behind the first one says: "unfortunately the process com.android.settings has stopped"
Any suggestions ??
Click to expand...
Click to collapse
This problem is mainly caused by corrupt or incompatible APN predefined settings. Try clearing all of them and just using the one you need.
To speed up the process, navigate closing the error as many times as required to the apn list, and once in the list, toggle airplane mode ON, that will stop the force close to show up, now delete all the entries, and toggle off airplane mode.
jak3z said:
This problem is mainly caused by corrupt or incompatible APN predefined settings. Try clearing all of them and just using the one you need.
To speed up the process, navigate closing the error as many times as required to the apn list, and once in the list, toggle airplane mode ON, that will stop the force close to show up, now delete all the entries, and toggle off airplane mode.
Click to expand...
Click to collapse
First thank you for the fast response.
I have just updating my rom (from cm 10 to cm 10.1) and when the system starts after the end of booting the error appears.
I have activated the airplane mode and no changes the error is continuing and when I go to settings --> the press on more in networks it says: "unfortunately the process com.android.settings has stopped".
Eklado said:
First thank you for the fast response.
I have just updating my rom (from cm 10 to cm 10.1) and when the system starts after the end of booting the error appears.
I have activated the airplane mode and no changes the error is continuing and when I go to settings --> the press on more in networks it says: "unfortunately the process com.android.settings has stopped".
Click to expand...
Click to collapse
Then it's one app that you got installed. Try removing any non essential apps.
jak3z said:
Then it's one app that you got installed. Try removing any non essential apps.
Click to expand...
Click to collapse
Thank you sir for your help
but I solved it installing another kernel

[Q] CM11 Unfortunately Trebuchet has stopped

Hi,
I have lately updated to CM11 (28/7) coming from CM7 with a clean install.
Everything looked great, but as I tried to set the "search bar" or something I got that repeating msg
"Unfortunately Trebuchet has stopped"
I keep getting it with every "OK".
Restarting doesn't solve this.
I'm trying to boot to recovery but as I get to the selection screen, touch doesn't work, and I keep getting back to Android. ok first time user with this - got in with bottons
wiped dalvik n catch -> no good
wiped all -> good
ok so its a bug report:
turning ON "search panel" gives the above error
I can't report in development thread because i'm new.
Any help is appreciated
Dror
I faced this issue as-well, quick way to solve it was to open settings from notification panel.
go to Applications->Trebuchet->Clear Data
should fix it, and you would loose only the Trebuchet configs instead of whole system.
Hope you have settings in your notification bar, if not, maybe you can try and install a different Launcher from PC browser and use it to reset Trebuchet
Hope it helps someone else who faces this issue.
dror84 said:
Hi,
I have lately updated to CM11 (28/7) coming from CM7 with a clean install.
Everything looked great, but as I tried to set the "search bar" or something I got that repeating msg
"Unfortunately Trebuchet has stopped"
I keep getting it with every "OK".
Restarting doesn't solve this.
I'm trying to boot to recovery but as I get to the selection screen, touch doesn't work, and I keep getting back to Android. ok first time user with this - got in with bottons
wiped dalvik n catch -> no good
wiped all -> good
ok so its a bug report:
turning ON "search panel" gives the above error
I can't report in development thread because i'm new.
Any help is appreciated
Dror
Click to expand...
Click to collapse
well I already cleared system data, which did help, but its good to know :good::good:
oh wow, just faced this problem in the first day fo use, nice to see others also had it
@karan4 : But that is temporary solution, trebuchet setting will get restored when you try to apply/enable search panel again the same error , Also gesture typing is not working for some devices(mine is android one(Sprout4)), these are the bugs I found in cm11.

Categories

Resources