Related
I'm running B&N 1.2 rooted with ManualNooter 4.4.28 and I saw a couple posts where people said they dropped some apks into their system/app folders to install apps that wouldn't install from the market. When I plugged my Nook into the computer, I don't have access to the system folder in order to copy the apk over. I tried just putting it on the sd card and using the Astro file manager and the ES file explorer to copy and paste into that folder, but it won't let me. What do I need to do in order to do that?
You need to remount the /system as read/write, it's read-only by default.
You'll probably need a terminal emulator, or preferably get adb setup. A little googling of the "mount" command and/or adb should get you there.
ylixir said:
You need to remount the /system as read/write, it's read-only by default.
You'll probably need a terminal emulator, or preferably get adb setup. A little googling of the "mount" command and/or adb should get you there.
Click to expand...
Click to collapse
Thanx for the info. I installed adb and got it working with my Nook now. Remounting the /system was easy after i searched for the command to use.
FWIW Root Explorer works great. Best four bucks I've spent so far for Market progs.
skeeterpro said:
FWIW Root Explorer works great. Best four bucks I've spent so far for Market progs.
Click to expand...
Click to collapse
I agree, best $4 I spent too. I got the Amazon App Store installed using it, also Angry Birds, Angry Birds Seasons, and Angry Birds Rio.
Hey i'm having trouble with something similar. A real challenge though, as I have 1) no non-adhoc wireless network 2) no genuine nook cable so ADB is not an option. I need to get access to the file system so I can apply the Ad-hoc fix, but I can't find any way to do so without a file manager, and I can't find a way to install an apk without ADB or market. (i'm running 1.2 rooted) Any genius ideas would be much appreciated!
Warder52 said:
I'm running B&N 1.2 rooted with ManualNooter 4.4.28 and I saw a couple posts where people said they dropped some apks into their system/app folders to install apps that wouldn't install from the market. When I plugged my Nook into the computer, I don't have access to the system folder in order to copy the apk over. I tried just putting it on the sd card and using the Astro file manager and the ES file explorer to copy and paste into that folder, but it won't let me. What do I need to do in order to do that?
Click to expand...
Click to collapse
Search "SU File Manager & Terminal" on Android Market. It's the best app working till now. It has "Mount System/Data RW" option, makes it easier to mount the partitions as RW without executing any commands and copy the APKs from SD card to any System or Data partitions.
It has quick option to mount the partitions as RO.
skgtheblij said:
Hey i'm having trouble with something similar. A real challenge though, as I have 1) no non-adhoc wireless network 2) no genuine nook cable so ADB is not an option. I need to get access to the file system so I can apply the Ad-hoc fix, but I can't find any way to do so without a file manager, and I can't find a way to install an apk without ADB or market. (i'm running 1.2 rooted) Any genius ideas would be much appreciated!
Click to expand...
Click to collapse
Do you have any microUSB cable that you can connect to a computer with? You don't need the genuine cable... if you don't have market, and can't install any apks via terminal/connectbot or ADB, then i'm not sure what you can do...
edit: maybe you could dual boot CWM and go through that to install files?
Thanks for the reply. I've tried a micro USB cable but it didn't seem to recognize the NC, and in 1.2 there was no notification that USB was connected. Perhaps I have something wrong with my USB port? Also, I don't really know how I would install files through CWM; I have it on SD, which is how I've been making changes. Could you point me in the right direction on that?
Thanks!
Those using Root Explorer, I'm running CM7 from an SD card using verygreen's method, but don't have any SD reader other than the NC, so I can't install gapps/market. I have sideloaded Root Explorer, but can't find anywhere to drop the gapps...zip where it will install on a recovery boot. I don't even have a way to format my one-and-only SD card to attempt a root of the stock OS and get more functionality out of CWM.
I don't mean to thread-hijack, but it seems quite related, and I can't post in the dev forum yet.
Taosaur said:
Those using Root Explorer, I'm running CM7 from an SD card using verygreen's method, but don't have any SD reader other than the NC, so I can't install gapps/market. I have sideloaded Root Explorer, but can't find anywhere to drop the gapps...zip where it will install on a recovery boot. I don't even have a way to format my one-and-only SD card to attempt a root of the stock OS and get more functionality out of CWM.
I don't mean to thread-hijack, but it seems quite related, and I can't post in the dev forum yet.
Click to expand...
Click to collapse
The gapps.zip is what U need?
RASTAVIPER said:
The gapps.zip is what U need?
Click to expand...
Click to collapse
The specific package is gapps-gb-20110307-signed.zip, for CM7 7.0.2. I have the file, and normally you would use a PC to drop it in the SD card's boot partition, but like I said, the only means I have of getting at the SD is over USB to the Nook, and I can't access the boot partition that way. I'm wondering if I can reach the boot partition via Root Explorer, or is it totally off limits while CM7 is running off the SD?
Taosaur said:
The specific package is gapps-gb-20110307-signed.zip, for CM7 7.0.2. I have the file, and normally you would use a PC to drop it in the SD card's boot partition, but like I said, the only means I have of getting at the SD is over USB to the Nook, and I can't access the boot partition that way. I'm wondering if I can reach the boot partition via Root Explorer, or is it totally off limits while CM7 is running off the SD?
Click to expand...
Click to collapse
I think with changing read/write U can do this with Root Explorer.
skgtheblij said:
Thanks for the reply. I've tried a micro USB cable but it didn't seem to recognize the NC, and in 1.2 there was no notification that USB was connected. Perhaps I have something wrong with my USB port? Also, I don't really know how I would install files through CWM; I have it on SD, which is how I've been making changes. Could you point me in the right direction on that?
Thanks!
Click to expand...
Click to collapse
yeah, i haven't played any with CWM / sdcard boots, so i'm no help. sorry...
as for the micro USB cable and such - i'm using a generic one, which is working. is it not even reading as a storage device? have you tried removing and reinstalling the drivers? do you have nook color tools installed so that you can toggle 'debugging'?
RASTAVIPER said:
I think with changing read/write U can do this with Root Explorer.
Click to expand...
Click to collapse
I'll try to clarify:
1) Running CM7.0.2 from SD, will the SD card's boot partition be visible in Root Explorer?
2) If so, in what specific directory do I need to place the zip file for the system to recognize and install it on a recovery boot?
Perhaps I'll start a more specific thread on the matter. If I end up having to get a card reader, so be it, but I've overspent my gadget allowance for at least a week or two, so I'm trying to get as far as possible with what I have. I do have the Amazon app store set up, and even minus the Google market, CM7 is preferable to stock.
In case anyone is interested, I found a simple solution: CMW. Verygreen's SD-install allows you to flash CMW to the Nook's eMMC without affecting the stock OS, and from CMW you can mount the SD card with USB plugged in and Windows will see the boot partition. I initially wanted to get CMW on the NC without rooting, anyway, so things worked out perfectly
Taosaur said:
In case anyone is interested, I found a simple solution: CMW. Verygreen's SD-install allows you to flash CMW to the Nook's eMMC without affecting the stock OS, and from CMW you can mount the SD card with USB plugged in and Windows will see the boot partition. I initially wanted to get CMW on the NC without rooting, anyway, so things worked out perfectly
Click to expand...
Click to collapse
That's a terrible idea. Installing CMW to the NC internal memory wipes the nooks built-in recovery. Getting CMW on an sd card is very simple, more functional, and can even be installed alongside verygreen's setup.
Better yet every person who doesn't do this is one less person showing up on the forums going "omg, i messed up and now my nook won't boot, it just keeps going to CMW."
ylixir said:
That's a terrible idea. Installing CMW to the NC internal memory wipes the nooks built-in recovery. Getting CMW on an sd card is very simple, more functional, and can even be installed alongside verygreen's setup.
Better yet every person who doesn't do this is one less person showing up on the forums going "omg, i messed up and now my nook won't boot, it just keeps going to CMW."
Click to expand...
Click to collapse
Any elaboration on why it's a terrible idea to replace the NC's built-in recovery with something more full-featured? It's advised or assumed in pretty much any dev thread for writing any ROM to eMMC, except most of them say "root first," which appears unnecessary. I did think I'd wiped the stock OS at first, but basically decided to deal with it later and finished installing gapps, after which the stock OS suddenly reappeared. It was perplexing, but after some more fiddling, I puzzled out the boot behavior and it is consistent:
1) power on with SD card inserted, and I get CM7.0.2.
2) hold home key and power on with SD card inserted, and ROM Manager will check for new ROMs/zips.
3) power on with SD card ejected (not necessarily removed) and I get stock 1.2.
4) hold home key and power on with SD card ejected, and I get CWM
I'm new to all of this, so I welcome feedback, but "It's bad, mmkay?" doesn't go far. Will having CWM in place of "factory mode" cause instability? Would a CWM install on the SD allow me to mount the SD boot part to USB? Why do we all keep wanting to write it "CMW?"
@taosaur
It's actually kind of a pet peeve of mine, along with the root first mentality you mentioned.
It won't cause instability, but it locks you out of doing a factory reset, and can lock you into recovery mode.
If things go wrong, you can't reset your device, can't get out of a bootcount induced bootloop, can't (in theory) take it in for warranty, etc.
Honestly it's the easiest thing in the world to switch between the two, or just fix the problems from cwm--if you know what you are doing. BUT!
I really can't count how many threads I've seen with people who've installed clockworkmod and have run into issues and have absolutely no idea what to do. They are just screwed and pissed off (rightly so) because they read somewhere that they needed CWM. Which they didn't. And now none of the howtos for fixing it work because they just have CWM, not the stock recovery mode...
And really there is no reason whatsoever to do this to begin with. I mean in order to get CWM on your nook, you have to have a spare sd card, and you have to know how to burn an image. So why not just make an sd with CWM and save the headache, keep the builtin functionality, not worry about getting locked into recovery mode, and still have all the benefits of CWM?
Maybe i should do a writeup howto on how to add CWM to the size-agnostic cards....
Would CWM's "factory reset" option only wipe the data in the stock OS, then, and not restore the old recovery? I see where you're coming from--obviously there's value in keeping idiotproof recovery on the table, and why risk your warranty if you're running from external media anyway? But again, the original problem that CWM solved for me was getting the gapps package into the SD card's boot partition. I had 1 card and 0 card readers at my disposal. Would CWM have been able to mount the SD card's boot partition if it were installed to the card itself?
I would definitely be interested to learn how to integrate CWM into one of verygreen's "size-agnostic" cards, especially if it would still be able to mount the CM7 boot partition over USB. As is, Flash CWM installs on eMMC by default, and the Boot to Recovery commands within CM7 don't work from SD--they just reboot.
Hi,
Having a with a Nook where it will not complete boot of CM7 which is installed on an SD card. Instead it boots into the Nook Color software.
I hold down the power button till I see the green Cyanogenmod logo with the Loading text, which I think means it is booting from the SD card (I can get it to boot into CM recover), then the screen goes blank and something goes wrong and the boot process continous with the 'n' screen and eventually loads the Nook boot animation and ends with the Nook software loaded. The nook software seems to be running fine except I can't get the SD card to boot all the way.
I've tried 2 known good SD cards, which boot without problems on my second nook, so I know it is not the SD card. I suspect something got corrupted with the boot process files, so I have been trying to find a way to overwrite the existing files with a virgin copy.
1) Can't get ADB running, I suspect the ADB route is only possible if I have the nook booting in a rooted CM7 in the first place (if some one could confirm that would help)
2) I have tried the x8 boot fail reset as well as the erase and deregister option in the nook software with no change in the above behaviour.
3) My last hope is to do an update back to stock using the recovery mode of the SD card. I can copy an updater file to the small partition of the SD card that is visible on Windows. I found a 1.2 stock updater, but it is ~200MB which is too big to fit on the SD card. If someone could point me to a smaller updater or a sd image with CWM and >200MB space that would be very helpful. TY!
What exactly are you trying to do? If you are just trying to set up dual-boot of CM off of your SD card, you don't need to do anything to the stock B&N internal install. I've had good luck using the procedure in the [ROM][CM7] [v1.3] Size-agnostic SD Card image and CM7 installer for SD Cards thread.
Are you sure the initial CM install on your SD card went well? It's known to be very particular (see top of that thread) about what SD cards work. The first few times I tried, I didn't realize there were error when CM was initially extracted which led to similar failures. From what you've described, the SD setup is failing. Normally, you don't need to worry too much about what's on the internal emmc setup of the Nook Color.
bobstro said:
What exactly are you trying to do? If you are just trying to set up dual-boot of CM off of your SD card, you don't need to do anything to the stock B&N internal install. I've had good luck using the procedure in the [ROM][CM7] [v1.3] Size-agnostic SD Card image and CM7 installer for SD Cards thread.
Are you sure the initial CM install on your SD card went well? It's known to be very particular (see top of that thread) about what SD cards work. The first few times I tried, I didn't realize there were error when CM was initially extracted which led to similar failures. From what you've described, the SD setup is failing. Normally, you don't need to worry too much about what's on the internal emmc setup of the Nook Color.
Click to expand...
Click to collapse
Hi bobsto, some background. I've been using CM7 on a microSD for several weeks now. I dual boot between Nook SW and CM7 that way. I've been using the link you posted above to create the SD cards and so far I have not had to touch the eMMC files at all.
Then a friend messed around with the Nook I gave them with CM7 on an SD card. I don't what the friend did, but when I got the Nook back it would not boot into CM7. I pulled my SD card from my working Nook and it wouldn't work either. So I'm guessing someone screwed with the Nook internal files. So I am trying the factory restore of the Nook SW to see if that will fix the problem and allow me to load CM7 from the SD card again. Interestingly Nookie will boot from SD and CM7 won't. Still trying stuff to see what will fix the problem. Suggestions are welcome.
sfsilicon said:
Hi bobsto, some background. I've been using CM7 on a microSD for several weeks now. I dual boot between Nook SW and CM7 that way. I've been using the link you posted above to create the SD cards and so far I have not had to touch the eMMC files at all.
Then a friend messed around with the Nook I gave them with CM7 on an SD card. I don't what the friend did, but when I got the Nook back it would not boot into CM7. I pulled my SD card from my working Nook and it wouldn't work either. So I'm guessing someone screwed with the Nook internal files. So I am trying the factory restore of the Nook SW to see if that will fix the problem and allow me to load CM7 from the SD card again. Interestingly Nookie will boot from SD and CM7 won't. Still trying stuff to see what will fix the problem. Suggestions are welcome.
Click to expand...
Click to collapse
Gosh, I wish someone could figure this out.
I restored original stock after a full CM7 root and it went fine but I can NOT get a dual boot sd card to work.
It seems to install but when I reboot it shows CM7 screen briefly then always boots to Nook OS.
Tried many many different cards and image writers and CM7's and even a card from my other Nook which I know works.
It will not boot into the CM7 from the SDcard.
Any help?
grohval said:
Gosh, I wish someone could figure this out.
I restored original stock after a full CM7 root and it went fine but I can NOT get a dual boot sd card to work.
It seems to install but when I reboot it shows CM7 screen briefly then always boots to Nook OS.
Tried many many different cards and image writers and CM7's and even a card from my other Nook which I know works.
It will not boot into the CM7 from the SDcard.
Any help?
Click to expand...
Click to collapse
Try this for CM7 - http://forum.xda-developers.com/showthread.php?t=1022786
Nookie also works - http://forum.xda-developers.com/showthread.php?t=922324
Not sure what is going on, but it worked for me.
sfsilicon said:
Try this for CM7 - http://forum.xda-developers.com/showthread.php?t=1022786
Nookie also works - http://forum.xda-developers.com/showthread.php?t=922324
Not sure what is going on, but it worked for me.
Click to expand...
Click to collapse
Thanks, the first worked like a charm!
I made a 32gb CM7 sdcard.
Still wish I could have got the size-agnostic card to work, it bugs me when I can't figure stuff out.
grohval said:
Still wish I could have got the size-agnostic card to work, it bugs me when I can't figure stuff out.
Click to expand...
Click to collapse
I'm in the same boat, but after 1 day of research and trial and error I'm happy it works. Maybe someone smarter will see this and know the answer and solve my problem curiousity.
I have a Nook Color. Somehow (and I really can't recall how), I can no longer get to the B&N side of my Nook. Even with the micro-SD out, I still go directly into CYANOGEN. To make matters worse, every single app I try to get from the market will not download. Once I 'Accept & download', the app starts to download then I get an Error overlay screen: "name-of-software" could not be downloaded due to an error.
So I have a V--E--R--Y generic tablet that can't do much. Please help.
Thanx in advance...................................
How did you go about installing CM7? Did you install it to the internal storage?
Please help!!! Noobie messed up NC (big time)
That's part of the problem. I did not consciously install to internal memory, I wanted it to boot from the SD card.
That's what I did...
That's what I did once. I unwittingly installed it onto the internal memory. It also happened to be really buggy. I restored it to stock using Clockworkmod Recovery. Did you use the installer for the SD card?
On a 16GB microSD, I used Win32DiskImager to write 1gb_clockwork-3.2.0.1-eyeballer to a newly-formatted SD card.
I put the ZIP file for: gapps-gb-20110828-signedgapps-gb-20110828-signed, and gapps-gb-20110828-newtalk-signed.
I tried the home-power key combo. It asks me if I'm sure that I want to restore to the factory. I say "Yes" but when the Nook starts up, I'm still in cyanogen mod.
Should I (re-)format the MicroSD, write 1gb_clockwork-3.2.0.1-eyeballer (or another version) then move recovery-clockwork-3.2.0.1-encore?
Aside from not being able to get back to B&N-supplied software, I can't do anything with the NC as an Android tablet.
OP, do you intend to install CM7 into the internal memory?
All I'm trying to accomplish is to get back to the factory NC settings. Once I can get there, I'll decide.
How to hard reset and Factory Default Nook Color - http://goo.gl/pSFui
Power down your NC. Wait approximately 10 seconds or so-- just give it a bit of a break between shut down and factory reset.
Press and hold power button and your "N" home button almost simultaneously-- press Power first and then the N.
Hold these until your screen flashes the "Touch the future of reading" message; hold for a second or two afterward, then release. You will then get a prompt asking if you want to reset your nook to factory. Press the home button to continue. It will ask you to confirm. Press the home key again. Your nook will deregister, reset, and when it reboots, you will see "Kate" in her tutorial video, as if you'd never registered it in the first place.
(Obviously your account info will still be valid-- simply register with your email/pw combo instead of creating a new account.)
Hope this helps- if so please click thanks
Sent from my MB860 using XDA App
I did this (more than once - grrrrrrrrrrrrr!). I never see the "touch the future....." message. Instead, I get a cyanogen mod 7 screen with the message "Booting into Recovery". Then I get a sickly yellow-greenish screen that asks (twice) if I want to teset. I confirm both times then it "wipes" the data. It then boots into a cyanogen mod 7 screen (and the skateboarding 'droid) and I go through the registration process.
Now, when I select a Google app, the downloading (Google Maps) seems to be taking forever, but at least I'm not getting the error I got before.
Also, I do not see the progress of the download that I'm used to seeing on my phone. All I see is "movement" under the "Downloading..." message. How long do I leave it before I abort the download?
Your micro sd card is removed right?
Sent from my MB860 using XDA App
mike11050 said:
On a 16GB microSD, I used Win32DiskImager to write 1gb_clockwork-3.2.0.1-eyeballer to a newly-formatted SD card.
I put the ZIP file for: gapps-gb-20110828-signedgapps-gb-20110828-signed, and gapps-gb-20110828-newtalk-signed.
I tried the home-power key combo. It asks me if I'm sure that I want to restore to the factory. I say "Yes" but when the Nook starts up, I'm still in cyanogen mod.
Should I (re-)format the MicroSD, write 1gb_clockwork-3.2.0.1-eyeballer (or another version) then move recovery-clockwork-3.2.0.1-encore?
Aside from not being able to get back to B&N-supplied software, I can't do anything with the NC as an Android tablet.
Click to expand...
Click to collapse
Eyeballer is a clockwork recovery bootable SD image which is used to install stuff (e.g. CM7) to internal memory.
http://forum.xda-developers.com/showthread.php?t=1030227
VeryGreen (size agnostic thread) is the SD image which creates a full OS on the SD card itself leaving the internal memory alone.
http://forum.xda-developers.com/showthread.php?t=1000957
You have used the Eyeballer method and have therefore done an internal install. You must also have installed a CM7 zip not just the gapps zip as they are just google apps and not an actual ROM.
You have 2 ways forward.
The simplest is if you want to end up with internal CM7 and are not interested in running the B & N ROM. Start again by creating the Eyeballer SD card using win32diskImager. Make sure you use a real USB SD adapter and not a card slot on a laptop. Put onto the card the CM7 ROM zip. I recommend the one from the KANG MiRaGe thread in the development forum. It is the most up to date and stable version available at the moment. Also put on one gapps zip (20110828). Now put the card in Nook, Power up and when in recovery then use the menus to format system, data and cache. Do NOT format boot. Then flash the CM7 ROM zip, then the gapps zip. Power down and prepare a clean SD card either by reformatting the eyeballer card with something like the HP USB card utility or a partition manager in the PC like miniTools. You could also use a different SD card if you want to keep the eyeballer one for future use. Put the card back in, power up and you should now be in a stable CM7 environment where you can set up wifi, register with the Google market and download apps.
The second way if you really want to return to stock on the internal and run CM7 of the SD card then use the eyeballer method but instead of flashing CM7 and gapps you now use a return to stock zip. Make sure you still format the partitions as before.
http://forum.xda-developers.com/showthread.php?t=914690
Once you have it back to stock and upgraded to whatever stock you want then follow the VeryGreen method from the link above. Once the SD card has put CM7 on itself, do not worry that there is only a 114MB space if you ever put the card back in the PC. That is normal; it is just the boot partition that the PC sees. The rest of the card can be seen if you USB connect the Nook to the PC.
Yes it is. Also, even though I'm not getting an error, no apps are loading.
You absolutely rock!!!!!!!!!!!!!!
I'm back at the NC "baseline". I tried to go back to a 1.2 (which is what it came with) using "update-nc-stock-1.2-signed". Once I re-booted, it kept returning to the NOOK COLOR screen. Then I used a 1.0.1 from your last post. It came back fine with 2 exceptions. 1) I now have a message that I need to install a SD card. When I do, my (Windows Explorer) "Computer" screen only recognizes the SD card and not the Nook. These are piddly little issues, but if I can get them fixed, great! (Right now, I cannot upgrade the NC or move any books or load any apps.
Thanks again!!!!!!!!!!!!!!!
mike11050 said:
That's part of the problem. I did not consciously install to internal memory, I wanted it to boot from the SD card.
Click to expand...
Click to collapse
I had this same problem. Since I am a new member, and can't post links, I'm going to try to help.
Install Clockwork Recovery to an SD card. Yes, the same way you did when installing clockwork to the SD the first time.
There are some threads on other fourms (google is your friend) that have links to Update files that allow you to update while keeping clockwork recovery, and some that will remove clockwork recovery. If you can remove the SD card and boot into the Stock Nook OS, then don't worry about installing 1.0.0 or 1.0.1 like some of the forms say. Just place the .ZIP file of the hacked update (usually 1.3 or 1.4 I think) into the root folder of the SD card, then Install it on your NC just like installing CM7 onto the internal memory. Your nook should start working again. It restored mine to full functionality. I can now pay 3 Dollars for angry birds, but at least its not as terribly slow and laggy as it was with CM7.
mike11050 said:
You absolutely rock!!!!!!!!!!!!!!
When I do, my (Windows Explorer) "Computer" screen only recognizes the SD card and not the Nook. These are piddly little issues, but if I can get them fixed, great! (Right now, I cannot upgrade the NC or move any books or load any apps.
Thanks again!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
I had the same issue last weekend, somehow my internal memory had become unrecognizable to anything, and the local Barnes and Noble store had a SD card that repartitioned the internal memory, and I was back in business. And as an added bonus I now have the 4 GB app/BN partition and the 1 GB mostly useless partition.
mike11050 said:
On a 16GB microSD, I used Win32DiskImager to write 1gb_clockwork-3.2.0.1-eyeballer to a newly-formatted SD card. ...
Click to expand...
Click to collapse
The instructions I see when googling around where I see that image mentioned are instructions for installing onto the Nook Color internal memory.
In the simplest case, making an n2a card is much less complicated than that ~ all you need is on the PC, write the size agnostic image, then drop in the CM7 build you want to use, then put the card in the Nook and it creates itself. There are upsides and downsides to different n2a methods, but that one seems to be the easiest ~ I've done it successfully several times, and I'm certainly nothing like an expert when it comes to these Android systems.
A recovery card image will make a bootable recovery card ... and while that might not have been what you needed to get what you want, its what you need to get the nook back to stock.
You might want to go to
http://forum.xda-developers.com/showpost.php?p=22809801&postcount=148
... to get a version of the 1.4.1 upgrade that your recovery card can install. You'll probably have to wipe all sorts of partitions, which means you'll have to sign in with the B&N store again and you'll get to download you B&N apps again, but that's pretty straightforward.
This OP in this thread:
http://forum.xda-developers.com/showpost.php?p=10623716&postcount=1
... says that it will be necessary to format ("wipe") the /data and /system partitions, but it doesn't seem like you'll lose anything you want to keep. After all, you've either overwritten or completely tangled up your stock B&N info.
That post above has 1.4.1. There should be a signed 1.4.2 lying around somewhere, but if not, once its back to stock, you can update to 1.4.2 the normal way, download the B&N update file, drop it in the root of the Nook, make sure its at least 30% charged, and let it go to sleep, which will run the update file.
I've worked ever so hard trying to configure and get the aesthetics of my cm7 rom up and running and apps in my testing might have triangulated and caused this error, I don't know.
Whenever I try to install a rom, boot into recovery, do a backup-- basically my clockwork is broken. Not broken, it still tries. It just pops this up on the screen:
Populating /dev using udev: done
Initializing random number generator....done
modprobe: chdir (2.6.32.9): No such file or directory
Starting network...
Detected Standard B&N nook layout, emmc first
It appears the SD card is already properly formatted
Skipping format
Mounting /dev/mmcblk1p1 as /boot
Looking for the install images....
Initial Install files not found
Please download it from nook.linuxhacker.ru
and put on first partition of this SD card
the name should start with updatei-cm and end with .zip
Click to expand...
Click to collapse
I'm using a recently nightly build of CM7.
I really love how I have it set-up, but if I don't have anyway to ever back it up my results are effortless.
How can I fix this situation without removal of the system. anyone, please?
First of all, have you done a nandroid backup in CWM? If so you can definitely recover.
Second it looks like your boot file is corrupted, always sending you to recover rather than a normal boot. What boot setup are you using?
echoedge said:
I've worked ever so hard trying to configure and get the aesthetics of my cm7 rom up and running and apps in my testing might have triangulated and caused this error, I don't know.
Whenever I try to install a rom, boot into recovery, do a backup-- basically my clockwork is broken. Not broken, it still tries. It just pops this up on the screen:
I'm using a recently nightly build of CM7.
I really love how I have it set-up, but if I don't have anyway to ever back it up my results are effortless.
How can I fix this situation without removal of the system. anyone, please?
Click to expand...
Click to collapse
You have installed your ROM to SD. There is no CWM recovery on SD installs. You cannot do a nandroid backup with the SD recovery.
See my post here for an explanation of the difference between emmc installs and SD installs:
http://forum.xda-developers.com/showthread.php?p=25354258
However, there is a way to back it up. Keep reading further down in my post.
thank you.
but how do i get access to uAltRam and uAltImg.
Multi SD Mount APP isn't working.
R/W permission difficulties in root explorer..
Using the 4202012 nightly build..
please help,
this shouldn't be too hard, don't let it drive me crazy
echoedge said:
thank you.
but how do i get access to uAltRam and uAltImg.
Multi SD Mount APP isn't working.
R/W permission difficulties in root explorer..
Using the 4202012 nightly build..
please help,
this shouldn't be too hard, don't let it drive me crazy
Click to expand...
Click to collapse
Take the card out and put in your PC. It will see the boot partition and you can copy the files there.
leapinlar said:
Take the card out and put in your PC. It will see the boot partition and you can copy the files there.
Click to expand...
Click to collapse
Hmm.. somehow I got it doing that. I of course tried that before and only the two partitions were loading. This time I was messing with it and clicking the multi sd mount widget and somehow the boot drive came up and I transferred the files on there.
So now I can do a nandroid backup as usual? Or sense it's an (Alt) instead of a recovery thing must it be different?
I'll try some things in the mean time..
Okay, so I have to boot into recovery and choose alternative and do it manually.
Can't do it with Rom Manager/Rom Tool Kit. Tried and it did the same error as in the OP.
Off to try now.
This is really strange though.
I've been messing with Nooks for a while and always used rom manager and the recovery console just fine.. but i've always ever done dual sd boots.This is my first time really doing a single one.
I'm in the boot menu (encore u-boot menu by j4mm3r), 1.2 port + extras.
It's been at
'Booting. One Moment'..." for at least a minute. Assuming it's frozen itself..
edit: Yeah, the Alt files didn't work.. I reset and pressed the N button, went to alternate and SD card. Nothing.
Reset it and it works as usual, but still no ability to backup..
echoedge said:
Okay, so I have to boot into recovery and choose alternative and do it manually.
Can't do it with Rom Manager/Rom Tool Kit. Tried and it did the same error as in the OP.
Off to try now.
This is really strange though.
I've been messing with Nooks for a while and always used rom manager and the recovery console just fine.. but i've always ever done dual sd boots.This is my first time really doing a single one.
I'm in the boot menu (encore u-boot menu by j4mm3r), 1.2 port + extras.
It's been at
'Booting. One Moment'..." for at least a minute. Assuming it's frozen itself..
Click to expand...
Click to collapse
Do not use ROM Manager with the verygreen SD installation. It does not work. Use the boot menu to boot into the alternate. Hold the n key while booting. Choose sd, alt.
Edit: you said two partitions showed up. Did you physically take the card out and insert into a card reader in your PC? It should see just one drive. Make sure those two files are there or it will hang when you choose it in the boot menu. I suspect you put the files on emmc boot since you used that strange program to do it.
Sent from my Nook Color running ICS and Tapatalk
No,
it's something with the multi mount sd app widget.
I hook mini usb to usb.
then hit the widget.
and JUST the boot partition comes up.
It says something about disk F: is not formatted correctly as well.
Just plugging it in without the multi mount app the outward sd card partition and the nook color come up, just those two.
And can't believe I didn't think to take the mini SD out and use an adapter. I'll try it again with that.
You're right I did mess something up with my EMMC.
Before I had it on a stock nook.
Now it goes to the cyanomod thing.
I took the miniSD card out, plugged it in for power and it turned on.
Went to that, had a bunch of force closed issues nothing worked, dry and empty, etc.
Any suggestions?
I'm gonna check out the miniSD card partitions now and try to get something going with that.
echoedge said:
You're right I did mess something up with my EMMC.
Before I had it on a stock nook.
Now it goes to the cyanomod thing.
I took the miniSD card out, plugged it in for power and it turned on.
Went to that, had a bunch of force closed issues nothing worked, dry and empty, etc.
Any suggestions?
I'm gonna check out the miniSD card partitions now and try to get something going with that.
Click to expand...
Click to collapse
There are many threads here that will tell you how to restore stock to emmc. Search for them.
But to get the SD working, do what I said. And I would suggest getting rid of that mount program so you don't mess it up again.
Edit: The problem with those mount programs is, if you mount the wrong partition, windows can only read fat partitions and will ask you to format. System and data are ext4 which windows cannot read.
Sent from my Nook Color running ICS and Tapatalk
Thanks a bunch.
In ubuntu once the sd card is inserted all 4 partititions automatically came up so I was able to copy and paste the Alt images.
Am backing up right now
And yeah getting the emmc back to stop np.
One thing i'm confused about.. you're saying one cannot update rom's if booting from an SD card?
also, i assume all in eed to do to make a back-up on my hard drive or usb (so its not just inclusive to the minisd), i can just root browser into mnt/sdcard/clockworkmod/backup and and create a zip of the 2012.5.5.etc.etc.etc. made folder and trnasfer it onto external device? If needed all I would need to do is a transfer back?
echoedge said:
One thing i'm confused about.. you're saying one cannot update rom's if booting from an SD card?
Click to expand...
Click to collapse
Yes you can update the ROM. Just not with CWM. You place the update-...zip in the boot partition of the SD and then using the boot menu (hold n during boot) select SD and recovery. The script in the boot partition will install the ROM for you. You need to read the first post in the agnostic image thread. It tells you all this.
On the second question, you can do it that way, but the files are already compressed there so just copy the folder to your PC to archive them.
is it okay to just boot into alternative (power + vol up/down) instead of going through the manual booting with the 'N' on start-up?
echoedge said:
is it okay to just boot into alternative (power + vol up/down) instead of going through the manual booting with the 'N' on start-up?
Click to expand...
Click to collapse
Yes. I didn't know you could do it that way. See, you taught me something. LOL. As long as you are getting into the 3.0.2.8 CWM recovery it's OK.
Sent from my NookColor using Tapatalk
Hi, so I've tried everything I can think of to restore my Nook to the stock 1.4.1 but nothing has worked and I've given up before I break anything else...
This all started when I was trying to install the CM7.2/CM9 dual boot from SD card - I burned the image to the SD card and booted but the device just hanged at a black screen (for a lot longer than it should have) after the CM "loading" startup screen.. I tried removing the SD card after holding the power button to turn it off but it then refused to boot to the EMMC stock OS... Somehow (I've only ever used SD card CM ROM's) an old CWM install (v.3.0.2 or something) was installed on the internal memory that booted when I tried to launch a factory reset (Power + N + vol+).
I then followed an older guide to restore to stock by formatting the /system and /data and installing a .zip from sd card (the nookcolor_1_4_1_signed.zip) but it failed with a (bad) error....
Now I don't know what to do. The device now hangs at "Read Forever" and the internal CWM is gone, as well as everything else I'm assuming... It will boot into CWM if it's installed on an SD card, but without that it will just reboot into Read Forever when I try to turn it off...
An aside, but now that I've checked with external CWM again, it appears there is now a "/system1, /system2, /data1, and /data2" file on the EMMC...
TL;DR: How do I restore Nook Color to stock 1.4.1 from CWM installed on an external SD card without flagging a "(bad)" error with the install?
Thank you for any help and I hope I haven't bricked this device... Hopefully this is just a case of ignorance on my part
EDIT: I've tried re-downloading the 1.4.1 and even a 1.2 signed ROM with out success. I haven't rooted the device, but I do not know how the internal CWM got there, as well as the fact that the external SD dual boot didn't work.. I'm using a new SanDisk Ultra 16GB SDHC Class 10 card if it makes a difference..
Could not having rooted the Nook be the only cause?
I had successfully dual booted the CM7.2 and CM9 for months until my old 16GB card broke... This was the new card I bought last week and it's been nothing but problems, exacerbated by myself, probably :/
I
cekren said:
Hi, so I've tried everything I can think of to restore my Nook to the stock 1.4.1 but nothing has worked and I've given up before I break anything else...
This all started when I was trying to install the CM7.2/CM9 dual boot from SD card - I burned the image to the SD card and booted but the device just hanged at a black screen (for a lot longer than it should have) after the CM "loading" startup screen.. I tried removing the SD card after holding the power button to turn it off but it then refused to boot to the EMMC stock OS... Somehow (I've only ever used SD card CM ROM's) an old CWM install (v.3.0.2 or something) was installed on the internal memory that booted when I tried to launch a factory reset (Power + N + vol+).
I then followed an older guide to restore to stock by formatting the /system and /data and installing a .zip from sd card (the nookcolor_1_4_1_signed.zip) but it failed with a (bad) error....
Now I don't know what to do. The device now hangs at "Read Forever" and the internal CWM is gone, as well as everything else I'm assuming... It will boot into CWM if it's installed on an SD card, but without that it will just reboot into Read Forever when I try to turn it off...
An aside, but now that I've checked with external CWM again, it appears there is now a "/system1, /system2, /data1, and /data2" file on the EMMC...
TL;DR: How do I restore Nook Color to stock 1.4.1 from CWM installed on an external SD card without flagging a "(bad)" error with the install?
Thank you for any help and I hope I haven't bricked this device... Hopefully this is just a case of ignorance on my part
EDIT: I've tried re-downloading the 1.4.1 and even a 1.2 signed ROM with out success. I haven't rooted the device, but I do not know how the internal CWM got there, as well as the fact that the external SD dual boot didn't work.. I'm using a new SanDisk Ultra 16GB SDHC Class 10 card if it makes a difference..
Could not having rooted the Nook be the only cause?
I had successfully dual booted the CM7.2 and CM9 for months until my old 16GB card broke... This was the new card I bought last week and it's been nothing but problems, exacerbated by myself, probably :/
Click to expand...
Click to collapse
Easy solution. Go to my tips thread linked in my signature and make a bootable CWM card per item A10. Then flash my format 567 zip. Then go to item A15 and download my 1.4.3 stock ROM and flash that. Boot up, register and you are golden.
If you want to put a ROM on SD go to my updated SD instruction thread also in my signature.
Sent from my Nook HD+ Running CM10 on SD
leapinlar said:
I
Easy solution. Go to my tips thread linked in my signature and make a bootable CWM card per item A10. Then flash my format 567 zip. Then go to item A15 and download my 1.4.3 stock ROM and flash that. Boot up, register and you are golden.
If you want to put a ROM on SD go to my updated SD instruction thread also in my signature.
Sent from my Nook HD+ Running CM10 on SD
Click to expand...
Click to collapse
Thanks! I'll try that right when I get home..
EDIT - Awesome - It works! The dual boot card also works!
EDIT 2 - so... booting from the SD card still doesn't work... It just hangs at the Cyanogen7 boot video looping over and over (left to go to the store, got back and it was still looping)... holding power button down just resets the device while the SD card is in, doesn't actually shut down for more than 4 seconds or so....
Should I post this as a new thread? I'll try searching for anybody else having this problem in the mean time...
cekren said:
Thanks! I'll try that right when I get home..
EDIT - Awesome - It works! The dual boot card also works!
EDIT 2 - so... booting from the SD card still doesn't work... It just hangs at the Cyanogen7 boot video looping over and over (left to go to the store, got back and it was still looping)... holding power button down just resets the device while the SD card is in, doesn't actually shut down for more than 4 seconds or so....
Should I post this as a new thread? I'll try searching for anybody else having this problem in the mean time...
Click to expand...
Click to collapse
Are you using Racks' dual boot SD? If so, how recent is it? You might want to go to his special CWM and clear dalvik cache and try rebooting again.
Sent from my Nook HD+ Running CM10 on SD
leapinlar said:
Are you using Racks' dual boot SD? If so, how recent is it? You might want to go to his special CWM and clear dalvik cache and try rebooting again.
Sent from my Nook HD+ Running CM10 on SD
Click to expand...
Click to collapse
Yeah, I used the Dual Boot image I downloaded a couple days ago from Techerrata (I used the one at the top of the list that had the most downloads, connection I'm on is blocking Techerrata so I can't get the exact name ATM) with burned with Win32DiskImager, popped in the card and turned on but it just hangs. I'll try clearing the dalvik cache with his CWM image and see if it fixes anything..
EDIT - Ok, I tried clearing the cache, but it gives me the following error:
E:unkown volume path [/data]
I checked the Mounts and Storage Menu, and it looks like I still have "/system1, /system2, /data1, and /data2" directories, did the 567 format.zip not take care of whatever file structure or partition these were kept on in the EMMC?
cekren said:
Yeah, I used the Dual Boot image I downloaded a couple days ago from Techerrata (I used the one at the top of the list that had the most downloads, connection I'm on is blocking Techerrata so I can't get the exact name ATM) with burned with Win32DiskImager, popped in the card and turned on but it just hangs. I'll try clearing the dalvik cache with his CWM image and see if it fixes anything..
EDIT - Ok, I tried clearing the cache, but it gives me the following error:
E:unkown volume path [/data]
I checked the Mounts and Storage Menu, and it looks like I still have "/system1, /system2, /data1, and /data2" directories, did the 567 format.zip not take care of whatever file structure or partition these were kept on in the EMMC?
Click to expand...
Click to collapse
The format 567 zip was for clearing the partitions on internal memory (emmc). Those partitions you are looking at are on the SD card (system1, etc).
You might just try clearing cache with his cwm rather than dalvik cache. You also might get a better response posting your dual boot question on the dual boot thread. I don't know a lot about the dual boot.
leapinlar said:
The format 567 zip was for clearing the partitions on internal memory (emmc). Those partitions you are looking at are on the SD card (system1, etc).
You might just try clearing cache with his cwm rather than dalvik cache. You also might get a better response posting your dual boot question on the dual boot thread. I don't know a lot about the dual boot.
Click to expand...
Click to collapse
Sounds good, I'll try that. Thanks again for all the help, though!
One thing to note... the initial boot does take a while and sits on a black screen while the cache image and formatted. Racks has put that into the dual boots with loop mounting so each bootable system will have its own cache space and avoid overwriting cache data from nother ROM.
DizzyDen said:
One thing to note... the initial boot does take a while and sits on a black screen while the cache image and formatted. Racks has put that into the dual boots with loop mounting so each bootable system will have its own cache space and avoid overwriting cache data from nother ROM.
Click to expand...
Click to collapse
Good to know, but should it really take more than 90 minutes to initially boot? I let it boot up to CM7 on a freshly burned Class 10 card and left for the store, when I got back it was still at the boot video, watched it for another 5 minutes and it still didn't do anything... I don't really know what the problem is, could it be the card?
I have seen it take up to10 minutes, but 90 is definately excessive... I would suspect the card being the issue... class 10 cards are not good for running any operating system from. While they have exceptional sustained read/write speeds... they (generally) have poor random small read/write speeds, and this is the types of files used by an operating system.
DizzyDen said:
I have seen it take up to10 minutes, but 90 is definately excessive... I would suspect the card being the issue... class 10 cards are not good for running any operating system from. While they have exceptional sustained read/write speeds... they (generally) have poor random small read/write speeds, and this is the types of files used by an operating system.
Click to expand...
Click to collapse
Oh.. ok, well good to know! I'll pick up a different card today and see if that will work.
I got the Mirage 7.2 to work, by writing the "generic_sd.img" to the card, the coping the .zip download to the boot partition (renaming it to "update-cm7-mirage.zip" so the generic loader would see it)...
I inserted the card, booted, and Tux showed up and it ran through partitioning the card, expanding the mirage zip, and shutting down. However, when I turned it back on, it showed the Cyanogen mod bootloader, and I selected "SD Normal" but Tux showed up again and it went through trying to partition again (which it said was not needed, so it skipped) and finding an update- / .zip file (which it deleted when it expanded it before), same with the SD recovery boot option... Should I just try a new card?
EDIT - So, I was sick of messing with SD card booting, and realized I really don't care if I have the stock OS on it anymore since my warranty is about to run out anyway, I just rooted it an installed Mirage 7.2 and it works! Thanks for the help with the SD Card problems, though!