Bricked S4- solved - Galaxy S 4 Q&A, Help & Troubleshooting

Bricked S4 - Solved
hi there im on wanam lite last rom and faux last kernel (u) and today i run antutu bench and because i wasnt happy with the score i tried again and the fone went off . coulndt start it ,battery out started again and now i get on screen FIRMAWARE UPGRADE ENCOUNTERED A ISSUE....... I canenter on download mode but im unable to flash anything, i cant either enter CW recovery mode, . Never happened with other kernel .somebody knows how to help . I have a unlocked 9505 from netherlands. thanks in advance

Not quite the right spot to post bud
Have mods move to appropriate forum.
Sent from my GT-I9505 using Tapatalk 2

theclear said:
Bricked S4
hi there im on wanam lite last rom and faux last kernel (u) and today i run antutu bench and because i wasnt happy with the score i tried again and the fone went off . coulndt start it ,battery out started again and now i get on screen FIRMAWARE UPGRADE ENCOUNTERED A ISSUE....... I canenter on download mode but im unable to flash anything, i cant either enter CW recovery mode, . Never happened with other kernel .somebody knows how to help . I have a unlocked 9505 from netherlands. thanks in advance
Click to expand...
Click to collapse
have you tried with ODiN to flash stock rom ?
jij kan hier ( http://forum.xda-developers.com/showthread.php?t=2265477 ) verder denk ik

theclear said:
Bricked S4
hi there im on wanam lite last rom and faux last kernel (u) and today i run antutu bench and because i wasnt happy with the score i tried again and the fone went off . coulndt start it ,battery out started again and now i get on screen FIRMAWARE UPGRADE ENCOUNTERED A ISSUE....... I canenter on download mode but im unable to flash anything, i cant either enter CW recovery mode, . Never happened with other kernel .somebody knows how to help . I have a unlocked 9505 from netherlands. thanks in advance
Click to expand...
Click to collapse
You can enter download mode but you cant flash anything through ODIN?? Whats the error?

vakaviti said:
You can enter download mode but you cant flash anything through ODIN?? Whats the error?
Click to expand...
Click to collapse
it fails everything. <ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!<ID:0/006> Added!!
And i tried with the the stock rom for my device downloaded on sam mobile. this is getting me crazy.

Maybe something with your odin installation is wrong,do you have kies installed and all your s4 drivers installed?
Sent from my GT-I9505 using xda premium

Seems like your nand corrupted for some reason.
Sent from my GT-I9505 using xda premium

Omg antutu may cause the bricked s4? I encounter that too, im using antutu 3 consecutive times, my phone overheat and died, but im lucky after taking out battery its still alive. Lessons learned.

theclear said:
it fails everything. <ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!<ID:0/006> Added!!
And i tried with the the stock rom for my device downloaded on sam mobile. this is getting me crazy.
Click to expand...
Click to collapse
Before using odin , make sure kies is not running on the background.
If it's running then you can't use odin. At least never worked for me.
Sent from my GT-N8010 using xda premium

What version of odin you have? If it fails flashing for 3.^ version use 1.85.
Sent from my GT-I9505 using xda premium

I'w seen people solve the "Complete(Write) operation failed." error by simply rebooting and changing USB port, M$ Windows works in mysterious ways

---------- Post added at 08:32 PM ---------- Previous post was at 08:27 PM ----------
[/COLOR]
theclear said:
it fails everything. <ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!<ID:0/006> Added!!
And i tried with the the stock rom for my device downloaded on sam mobile. this is getting me crazy.
Click to expand...
Click to collapse
:good: hier moet je even kijken : ( http://forum.xda-developers.com/showthread.php?t=2265477 )

solved
mavixda said:
---------- Post added at 08:32 PM ---------- Previous post was at 08:27 PM --
[/COLOR]
:good: hier moet je even kijken : ( http://forum.xda-developers.com/showthread.php?t=2265477 )
Click to expand...
Click to collapse
Thanx to everyone. I solved this by changing usb port and flashing the full stock rom for my country.THANKS EVERYONE

theclear said:
Thanx to everyone. I solved this by changing usb port and flashing the full stock rom for my country.THANKS EVERYONE
Click to expand...
Click to collapse
glad you got everything working again :highfive: And thanks for posting a update so other users can follow your steps if need be

S4 potential brick
ratcom said:
glad you got everything working again :highfive: And thanks for posting a update so other users can follow your steps if need be
Click to expand...
Click to collapse
Hi people i really need insight on this... i have a rooted S4 and i tried flashing CWM recovery using Odin 3.09.
Now the device wont boot, and gets stuck on the 'Samsung galaxy S4' screen. recovery mode is also not accessible!! what do i doo
thanks in advance...

Related

No recovery mode? Please help me!

Soo I did do a custom rom (repencis). Won't startup for me... stay on Galaxy y thing screen. No animation.
So I went into recovery but the recovery doesnt work for me too.... ?
Help me please!
IcemanGFX said:
Soo I did do a custom rom (repencis). Won't startup for me... stay on Galaxy y thing screen. No animation.
So I went into recovery but the recovery doesnt work for me too.... ?
Help me please!
Click to expand...
Click to collapse
Flash stock rom -->http://forum.xda-developers.com/showthread.php?t=1465800
choose u r country n download packages & follow instructions..
Thats the problem, the names are wrong... and it always says : failed
IcemanGFX said:
Thats the problem, the names are wrong... and it always says : failed
Click to expand...
Click to collapse
i didnt understood u?
Ohnoo it stays saying it failed!!! now theres no screen anymore. Only in downliadmode is be able atm
IcemanGFX said:
Ohnoo it stays saying it failed!!! now theres no screen anymore. Only in downliadmode is be able atm
Click to expand...
Click to collapse
i cant get your information clearly
if you have download mode that is recovery,
you can flash from odin in that mode
deathnotice01 said:
i cant get your information clearly
if you have download mode that is recovery,
you can flash from odin in that mode
Click to expand...
Click to collapse
Well, it's not the problem I can go into that download mode. But volume up + home + power won't work.
I did try to flash it to stock, but I get a failure.
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
IcemanGFX said:
Well, it's not the problem I can go into that download mode. But volume up + home + power won't work.
I did try to flash it to stock, but I get a failure.
Click to expand...
Click to collapse
well,
download another firmware and another version of odin,
if it still fails try reinstalling samsung usb drivers,
deathnotice01 said:
well,
download another firmware and another version of odin,
if it still fails try reinstalling samsung usb drivers,
Click to expand...
Click to collapse
Link me please?
IcemanGFX said:
Link me please?
Click to expand...
Click to collapse
it's in the development section,
as for odin try 1.85 google it
Done ! The bootloader was deleted by the phone or something.. Its fixed

Need PIT file for S4 i9505 - Brick on table

Hi,
I can put phone in download mode.
When I try to flash modem.bin i got fail on Odin.
I can not boot into recovery mode. I cannot make phone to run..Phone only continue to vibrate.
Thank you.
aaugus said:
Hi,
I can put phone in download mode.
When I try to flash modem.bin i got fail on Odin.
I can not boot into recovery mode. I cannot make phone to run..Phone only continue to vibrate.
Thank you.
Click to expand...
Click to collapse
We're on the same boat mate...
Already searched all over the web for the file but it seems no one has it yet.
It's easily made with heimdall i heard?
Some xda member who's willing to make an i9505 pit file?
---------- Post added at 06:13 PM ---------- Previous post was at 06:01 PM ----------
Can you boot into download mode?
Same broplem here..
PIT file needed.
here you go http://forum.xda-developers.com/showpost.php?p=41267669&postcount=96
samersh72 said:
here you go http://forum.xda-developers.com/showpost.php?p=41267669&postcount=96
Click to expand...
Click to collapse
Thanks for PIT.
But on phone i get this message :
Product name: GT-I9505
Current binary; Custom
System status: Custom
CBS-OEM_CONFIG_LSB: 0x30
STRAT (224, 1440)
SECURE CHECK FAIL : PIT
Any solution ?
Thanks.
aaugus said:
Thanks for PIT.
But on phone i get this message :
Product name: GT-I9505
Current binary; Custom
System status: Custom
CBS-OEM_CONFIG_LSB: 0x30
STRAT (224, 1440)
SECURE CHECK FAIL : PIT
Any solution ?
Thanks.
Click to expand...
Click to collapse
did you flash stock with pit?
samersh72 said:
did you flash stock with pit?
Click to expand...
Click to collapse
Yes.
No luck. I am sending my device to service centre today.
aaugus said:
Yes.
No luck. I am sending my device to service centre today.
Click to expand...
Click to collapse
did u tick re-partiton?
I did.
B.r.
tornado92 said:
did u tick re-partiton?
Click to expand...
Click to collapse
Any updates on this?
Got stuck too here
Is there anyone else who can help with this?
adambombz said:
Is there anyone else who can help with this?
Click to expand...
Click to collapse
Jtag
Been trying all day to fix mine, i get a No pit error if i dont flash with a pit, and if i do i get a complete(write) error message.
Called service centre, and its $45AU to get them to reflash to stock, so i'll let them struggle with it haha.
Same problem with my s4 lte-A need signed pit otherwise it
HTML:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
shows this

Root S4 with I337UCUEMK2

Is there a way to root my cell with above firmware installed. Have not seen a way with this version or I missed it. Thanks Guys.
ROOTED mk2 but recovery through goomanager failed.
tailgunner9 said:
Is there a way to root my cell with above firmware installed. Have not seen a way with this version or I missed it. Thanks Guys.
Click to expand...
Click to collapse
Upgraded to 4.3. Its showed the MK2 band version. Then successfully rooted.
Later ran GOOMANAGER recovery app which crashed the whole thing to error message saying.
system software unauthorised by AT&T found. Ran the Kies later.
The status shows as "firmware upgrade encountered an issue, Please select recovery mode in Kies and try again.
Tried in Kies emergency recovery again and it fails and says. contact samsung customer service.
Tried Odin with Stock MDL but fails as below.
Odin message says :
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
pLS.hELP. The knox fuse says : knox warranty void 0x1
Appreciate all help.
tailgunner9 said:
Is there a way to root my cell with above firmware installed. Have not seen a way with this version or I missed it. Thanks Guys.
Click to expand...
Click to collapse
Just use Saferoot: http://www.droidviews.com/root-verizon-galaxy-s4-sch-i545-on-android-4-3-vruemk2/
sweetpoi098 said:
Upgraded to 4.3. Its showed the MK2 band version. Then successfully rooted.
Later ran GOOMANAGER recovery app which crashed the whole thing to error message saying.
system software unauthorised by AT&T found. Ran the Kies later.
The status shows as "firmware upgrade encountered an issue, Please select recovery mode in Kies and try again.
Tried in Kies emergency recovery again and it fails and says. contact samsung customer service.
Tried Odin with Stock MDL but fails as below.
Odin message says :
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
pLS.hELP. The knox fuse says : knox warranty void 0x1
Appreciate all help.
Click to expand...
Click to collapse
You can't have custom recovery on our phone past MDL. Using goomanager set your knox flag, and you can't change that back as of yet. You also can't ODIN back to any previous version. You need to read more before trying anything else because all this information is around here. You have to follow the MJ6-MJ9 instructions to recover that has been linked many times in help threads and others.
I am sure I am not the only one that had this issue but I am on this firmware but could not get motochopper to work. finally ran SafeRoot in Admin mode and it worked. So stoked now. Cant wait to flash Gummy ROM!
Greybush31 said:
I am sure I am not the only one that had this issue but I am on this firmware but could not get motochopper to work. finally ran SafeRoot in Admin mode and it worked. So stoked now. Cant wait to flash Gummy ROM!
Click to expand...
Click to collapse
Motochopper has been confirmed not working on any firmware past MDL. You can't run Gummy. The loki exploit to let us run custom kernels was patched. Do more reading before you brick again, and check out the General section for a nice list of what you can do on MK2/with Safestrap.
Thanks. That's what I have been doing. I am just tired of touchwiz. I like the raw android better, like my Nexus 10.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Greybush31 said:
Thanks. That's what I have been doing. I am just tired of touchwiz. I like the raw android better, like my Nexus 10.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
If you want something that looks more like AOSP (raw android) then you can flash version 3.6 of Foxhound ROM from the international S4. I'm running it on stock and it's very nice. I chose the essential option in the AROMA installer but the full install might work also.

Need help with odin and firmware

So they other night i tried rooting my gs7 edge. Found a tutorial online and flashed a file via odin. And upon rebooting ended up freezing on the AT&T boot logo. which seemed to a common problem after reading the comments. The only way was to do a factory reset which i did and got the phone working again. But now the phone is extremely sluggish it lags doing the simplest tasks. Now i want to start over and flash the stock firmware via odin but not sure what files to flash ive tried flashing couple different ones and odin has always failed. can some one point me to the right files i am a complete newb with samsung phones.
You could flash the u firmware
Your phones lagging because you have the engine kernel flashed.
brusslesprouts said:
So they other night i tried rooting my gs7 edge. Found a tutorial online and flashed a file via odin. And upon rebooting ended up freezing on the AT&T boot logo. which seemed to a common problem after reading the comments. The only way was to do a factory reset which i did and got the phone working again. But now the phone is extremely sluggish it lags doing the simplest tasks. Now i want to start over and flash the stock firmware via odin but not sure what files to flash ive tried flashing couple different ones and odin has always failed. can some one point me to the right files i am a complete newb with samsung phones.
Click to expand...
Click to collapse
Start over and avoid root ENG BOOT kernel ID garbage. I recommend just going to the U software until a real root method can be found.
im just trying to flash back to the newest update via odin and am stuck at
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
ShrekOpher said:
Start over and avoid root ENG BOOT kernel ID garbage. I recommend just going to the U software until a real root method can be found.
Click to expand...
Click to collapse
seems to be stuck flashing on odin
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
odin also seems to freeze when loading the ap. ill let it sit for a few minutes and resumes. also got it to fail after restarting the phone and taking the sim card out into another phone.
Did you try rebooting you phone back into download mode
Sent from my SM-G935U using Tapatalk
brusslesprouts said:
seems to be stuck flashing on odin
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
Click to expand...
Click to collapse
Make sure you are using all 4 files (BL, AP, CSC, CS)
Also if you can boot into recovery first factory reset from there it will make the Odin flash cleaner.
If you keep getting an error you might need a different version of Odin. Use the one from U firmware thread it should work.
If it is stuck at setting up connections you may need to reinstall the drivers for your phone.
ShrekOpher said:
Start over and avoid root ENG BOOT kernel ID garbage. I recommend just going to the U software until a real root method can be found.
Click to expand...
Click to collapse
ShrekOpher said:
Make sure you are using all 4 files (BL, AP, CSC, CS)
Also if you can boot into recovery first factory reset from there it will make the Odin flash cleaner.
If you keep getting an error you might need a different version of Odin. Use the one from U firmware thread it should work.
If it is stuck at setting up connections you may need to reinstall the drivers for your phone.
Click to expand...
Click to collapse
i took the the sim card out and am now getting a error
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> FAIL! SHA256 is invalid
<OSM> All threads completed. (succeed 0 / failed 1)
ill try doing a factory reset again and trying again. not sure what sha256 is i flashed the files from here http://forum.xda-developers.com/att...a-10-03-16-t3477246/post69309275#post69309275
dogredwing1 said:
Did you try rebooting you phone back into download mode
Sent from my SM-G935U using Tapatalk
Click to expand...
Click to collapse
yes phone is in download mode.
brusslesprouts said:
i took the the sim card out and am now getting a error
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> FAIL! SHA256 is invalid
<OSM> All threads completed. (succeed 0 / failed 1)
ill try doing a factory reset again and trying again.
Click to expand...
Click to collapse
The above error I got from one Odin. I used the other Odin and it went through fine. Go to the U firmware thread in this forum and download the other Odin.
Yea need the patched Odin.. also located in the root guide in general forum
Sent from my SM-G935U using Tapatalk
---------- Post added at 08:41 PM ---------- Previous post was at 08:39 PM ----------
Root-Maniac said:
Yea need the patched Odin.. also located in the root guide in general forum
Sent from my SM-G935U using Tapatalk
Click to expand...
Click to collapse
Here's a direct download link for you http://d-h.st/gsDA
Sent from my SM-G935U using Tapatalk
Root-Maniac said:
Yea need the patched Odin.. also located in the root guide in general forum
Sent from my SM-G935U using Tapatalk
---------- Post added at 08:41 PM ---------- Previous post was at 08:39 PM ----------
Here's a direct download link for you http://d-h.st/gsDA
Sent from my SM-G935U using Tapatalk
Click to expand...
Click to collapse
this is the version i have had 3.12. It hangs on loading the ap goes into "not responding" then if i wait it will load and can load all the other files. I will try this version in the link and post results
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> emmc_appsboot.mbn
<ID:0/004> lksecapp.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I don't know about that 1. Hopefully someone else can help..
Sent from my SM-G935U using Tapatalk
Root-Maniac said:
I don't know about that 1. Hopefully someone else can help..
Sent from my SM-G935U using Tapatalk
Click to expand...
Click to collapse
not sure what els to do i have insurance on the phone but when the phone boots it says custom. so im afraid to exchange it. i got all my files from here http://forum.xda-developers.com/att...a-10-03-16-t3477246/post69309275#post69309275 except for the odin which was posted above. The phone is stuck in a boot loop as of now.
ShrekOpher said:
The above error I got from one Odin. I used the other Odin and it went through fine. Go to the U firmware thread in this forum and download the other Odin.
Click to expand...
Click to collapse
do you have a link for the U firmware. I went here http://forum.xda-developers.com/att-s7-edge/how-to/samsung-sm-935u-firmware-install-guide-t3411451 and the link is dead.
brusslesprouts said:
do you have a link for the U firmware. I went here http://forum.xda-developers.com/att-s7-edge/how-to/samsung-sm-935u-firmware-install-guide-t3411451 and the link is dead.
Click to expand...
Click to collapse
I will provide links to both the Odin and the Firmware.
Odin.
https://mega.nz/#!D4ojEZjC!t77eBmm2Y7IEb-TNbYGqXV8HvCVVNWPDMUe3glxE37k
Firmware Downloaded from Sammobile.
https://mega.nz/#!r8QARZLS!RWjgsYIvAc2KqN0Yiw_TnYPCpmVbYMwpRJw8HlVSUDo
ShrekOpher said:
I will provide links to both the Odin and the Firmware.
Odin.
https://mega.nz/#!D4ojEZjC!t77eBmm2Y7IEb-TNbYGqXV8HvCVVNWPDMUe3glxE37k
Firmware (Still uploading might be an hour or so)Downloaded from Sammobile.
Click to expand...
Click to collapse
i appreciate it thank you
ShrekOpher said:
I will provide links to both the Odin and the Firmware.
Odin.
https://mega.nz/#!D4ojEZjC!t77eBmm2Y7IEb-TNbYGqXV8HvCVVNWPDMUe3glxE37k
Firmware Downloaded from Sammobile.
https://mega.nz/#!r8QARZLS!RWjgsYIvAc2KqN0Yiw_TnYPCpmVbYMwpRJw8HlVSUDo
Click to expand...
Click to collapse
thank you download worked. Going to flash now will report back

Help special case to flash stock rom in s7 edge 935a

Hello every one, i am here to ask help for a special case, if is there someone with the knowlege in XDA to help mein this, i got a friend who has his s7 edge from at&t one day not working anymore it got stuck in boot loop, he never try to root or nothing he is a normal simple phone user. so now i am trying to help him but i dont know which firmware the phone had, i cant put developer options , the usb debugging nothing etc, i try to start in recovery mode but it get stuck in blue letters that say recover booting and never boot into recovery, the only thing the phone do now is get into download mode, and the pc recognize it and odin too, i have read every single thread i think to flash every single stock rom available and none has work i try diferent pc´s, cables, usb port, odin version etc. the most common error i got all times by odin was this one
ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i am noob in this things i barely know a little readding all the threads i have put so much effort on this without success ,
can someone guide me please i will apreciate it
Darkboss10 said:
Hello every one, i am here to ask help for a special case, if is there someone with the knowlege in XDA to help mein this, i got a friend who has his s7 edge from at&t one day not working anymore it got stuck in boot loop, he never try to root or nothing he is a normal simple phone user. so now i am trying to help him but i dont know which firmware the phone had, i cant put developer options , the usb debugging nothing etc, i try to start in recovery mode but it get stuck in blue letters that say recover booting and never boot into recovery, the only thing the phone do now is get into download mode, and the pc recognize it and odin too, i have read every single thread i think to flash every single stock rom available and none has work i try diferent pc´s, cables, usb port, odin version etc. the most common error i got all times by odin was this one
ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i am noob in this things i barely know a little readding all the threads i have put so much effort on this without success ,
can someone guide me please i will apreciate it
Click to expand...
Click to collapse
Remove PIT file and try again.
From Edge of Galaxy Seven
Darkboss10 said:
Hello every one, i am here to ask help for a special case, if is there someone with the knowlege in XDA to help mein this, i got a friend who has his s7 edge from at&t one day not working anymore it got stuck in boot loop, he never try to root or nothing he is a normal simple phone user. so now i am trying to help him but i dont know which firmware the phone had, i cant put developer options , the usb debugging nothing etc, i try to start in recovery mode but it get stuck in blue letters that say recover booting and never boot into recovery, the only thing the phone do now is get into download mode, and the pc recognize it and odin too, i have read every single thread i think to flash every single stock rom available and none has work i try diferent pc´s, cables, usb port, odin version etc. the most common error i got all times by odin was this one
ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i am noob in this things i barely know a little readding all the threads i have put so much effort on this without success ,
can someone guide me please i will apreciate it
Click to expand...
Click to collapse
Not knowing WHAT you are flashing, makes it a little harder to determine what is going wrong.
Go HERE and flash this in Download Mode. This is the latest Stock 935A ROM, This will wipe Everything on the device, and it'll be like it came brand new
norbarb said:
Remove PIT file and try again.
From Edge of Galaxy Seven
Click to expand...
Click to collapse
which is the pit file, sorry for dumb question
Darkboss10 said:
which is the pit file, sorry for dumb question
Click to expand...
Click to collapse
If I remember correctly you need to uncheck PIT in odin and this should help. BTW. What are you trying to flash?
From Edge of Galaxy Seven
I have try the stock rom version 935a...pf2 . And any other stock rom i have found for the 935a seeing which will work .
Darkboss10 said:
I have try the stock rom version 935a...pf2 . And any other stock rom i have found for the 935a seeing which will work .
Click to expand...
Click to collapse
If you are currently on a ROM that has v4 boot loader's, part of your problem may be that you are trying to flash a rom with v2, v3 bootloaders
Sent from my SM-G935T using XDA-Developers Legacy app
so i do better go with the v4 bootloader and i will check if the pit file is uncheck, what should i put on the re-partition case of odin active or inactive?
by the way thanks for your help
kangi26 said:
If you are currently on a ROM that has v4 boot loader's, part of your problem may be that you are trying to flash a rom with v2, v3 bootloaders
Sent from my SM-G935T using XDA-Developers Legacy app
Click to expand...
Click to collapse
hey i did exactly as you told me , and for first time i guess i have an advance, i still get an error but at least a new error , check it out maybe you know what it is
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> lksecapp.mbn
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
any idea what can be?
i try to flash the G935a...PI2 rom bot without the CSC which i guess is the pit file right?
When you try to get the device into Recovery, it will appear like it isn't doing it or looks like an "No Command" error and it can take a couple of min to actually get into Recovery.
I would boot into Recovery again, let it sit for a few min. My bet is that it will eventually get into Recovery. Once it does, do a Factory reset, and then reboot into Download Mode, open Odin connect the device to your PC and install all 4 of the items from the Stock ROM thread, don't mess with any of the settings in Odin, just populate the slots with the BL, AP, CP and CSC
kangi26 said:
When you try to get the device into Recovery, it will appear like it isn't doing it or looks like an "No Command" error and it can take a couple of min to actually get into Recovery.
I would boot into Recovery again, let it sit for a few min. My bet is that it will eventually get into Recovery. Once it does, do a Factory reset, and then reboot into Download Mode, open Odin connect the device to your PC and install all 4 of the items from the Stock ROM thread, don't mess with any of the settings in Odin, just populate the slots with the BL, AP, CP and CSC
Click to expand...
Click to collapse
This is what i get . But it doesnt enter recovery at the end. It just shut off ....
Darkboss10 said:
This is what i get . But it doesnt enter recovery at the end. It just shut off ....
Click to expand...
Click to collapse
Looks like the device is just rebooting
Sent from my SM-G935T using XDA-Developers Legacy app
kangi26 said:
Looks like the device is just rebooting
Sent from my SM-G935T using XDA-Developers Legacy app
Click to expand...
Click to collapse
if you watch the top corner blue letters it says recovery booting....
Darkboss10 said:
if you watch the top corner blue letters it says recovery booting....
Click to expand...
Click to collapse
I'm at a loss man, I'm sorry. I haven't seen that before, I dont get the "Samsung" part when I enter Recovery
Darkboss10 said:
if you watch the top corner blue letters it says recovery booting....
Click to expand...
Click to collapse
Can you post screen from download mode?
From Edge of Galaxy Seven
norbarb said:
Can you post screen from download mode?
From Edge of Galaxy Seven
Click to expand...
Click to collapse
There you go . By the way i should mention the phone only turns on download mode when plugged.
Darkboss10 said:
There you go . By the way i should mention the phone only turns on download mode when plugged.
Click to expand...
Click to collapse
OK you got bootloader v2. Try to flash some older version of MM in download mode using odin
Like from here: http://forum.xda-developers.com/showthread.php?p=67601581
From Edge of Galaxy Seven
You need to start by using the latest Odin, 3.12.3 for installing the original ROM. If you try to unlock, you need to go get the PrinceComsy version. PrinceComsy won't work for in-bricking a device, and if you have any of the stock versions of the ROM, you need the 3.12.3 version.
norbarb said:
OK you got bootloader v2. Try to flash some older version of MM in download mode using odin
Like from here: http://forum.xda-developers.com/showthread.php?p=67601581
From Edge of Galaxy Seven
Click to expand...
Click to collapse
I try that . Now i got this error but only on the phone screen and odin is stuck at initialization .. any idea what could be
i download the venom stock rom and the odin file he suggest but that odin is v 3.11.2 , so that was the one that trows me the odin protocol error, i try the same rom but with the v 3.12.3 odin , and it start working but it says fail at the on the recovery image, do that has to do something with my problem that the phone can boot into recovery mode?
here are the logs
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> FAIL! (Erase)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1

Categories

Resources