Related
So I bought a digitizer replacement kit on ebay for my N1. (I dropped it and my screen shattered.) I saw the iFixit teardown on the N1 and figured it'd be easy enough to do myself. The kit comes with tools to open it, but no adhesive to mount the new digitizer.(like the iPhone kits)
Basically I was just wondering what I should use to stick the new digitizer back in. Any advice from someone who's already done it would be great too.
Edit: Got the digitizer installed fine, phone booted, I giggled like a schoolgirl aaaand.. Couldn't unlock my phone. It wont respond to touch. Took it apart again to make sure it was connected properly... So now my only assumption is the digitizer I bought was defective.
Any help would be appreciated..
try asking the ebay seller
Thanks, I'll try that. Any other ideas?
maybe ask an electronics repair shop near you
RellikZephyr
Well I got it installed but it wont respond to touch.. Defective part?
I guess you've made sure it's plugged in right? Would definitely double check that
Sent from my Nexus One using the XDA mobile application powered by Tapatalk
TFJ4 said:
I guess you've made sure it's plugged in right? Would definitely double check that
Sent from my Nexus One using the XDA mobile application powered by Tapatalk
Click to expand...
Click to collapse
Yep I did. I contacted the seller on eBay and waiting for a reply. Unless you guys can think of something else I did wrong in the installation I'm sticking with it being defective.
have other people replaced the digitizer successfully on the N1? or perhaps it is some software difference that the new digitizer needs to be "read" by the software, but the OS is looking for the "old" digitizer still...i'm talking out my arse BTW..
RogerPodacter said:
have other people replaced the digitizer successfully on the N1? or perhaps it is some software difference that the new digitizer needs to be "read" by the software, but the OS is looking for the "old" digitizer still...i'm talking out my arse BTW..
Click to expand...
Click to collapse
I've seen a few people posting here saying they've done it, and I know one guy took pictures of the process. I understand what you're saying and it sounds logical enough, but I can't imagine the parts would be any different to cause that sort of problem.. Assuming the part I bought is legit.
Either way the seller should let me return it if the second one they ship out doesn't work.
i replaced my screen and digitizer yesterday using ebay tutorials i found. pm me and ill share but i bet you used the same ones. its a very delicate process. sometimes you have to be tough with it but at the same time not break the little guy. the only problem i could think of would be your connection. the only thing i fudged on minr was not cleaning the lcd before placing it back in. now i have two large fingerprints in my top right under my screen when i dim it.
disdain735 said:
So I bought a digitizer replacement kit on ebay for my N1. (I dropped it and my screen shattered.) I saw the iFixit teardown on the N1 and figured it'd be easy enough to do myself. The kit comes with tools to open it, but no adhesive to mount the new digitizer.(like the iPhone kits)
Basically I was just wondering what I should use to stick the new digitizer back in. Any advice from someone who's already done it would be great too.
Edit: Got the digitizer installed fine, phone booted, I giggled like a schoolgirl aaaand.. Couldn't unlock my phone. It wont respond to touch. Took it apart again to make sure it was connected properly... So now my only assumption is the digitizer I bought was defective.
Click to expand...
Click to collapse
I cast... THREAD NECROMANCY!!!
I believe I have the correct adhesive (3M double-sided sticky tape of some small sort), but I'm wondering if anyone has a better idea on how to get the old sticky gunk off of the LCD aside from using rubbing alcohol? Thoughts? Kthxbai.
EDIT: Also, did you ever get your phone working again?
My screen is cracked to all hell. Is there a youtube video showing a strip down of the epic? Is there a guide on how to replace it? I have the lcd and ditizer,so I'm all set except for the actual replacement. LOL
Tia
would you mind sharing the source for the screen/digitizer for those that haven't broken their screens yet ?
Just curious.
I do not know how to tear it down yet though.
Thanks for sharing.
I got it from an interstate wireless on 7 mile for like 60$ lol
Anyone?
igotsthemagicinme said:
I got it from an interstate wireless on 7 mile for like 60$ lol
Anyone?
Click to expand...
Click to collapse
You sure you got the right screen? Epic uses SAMOLED, not LCD... also, the digitizer and the LEDs are part of the same construct (one of the reasons it's "super"), so you'd effectively be really just changing the display with integrated digitizer. The glass itself is glued to the plastic case. You'd need to find a way to pull it up, from what I can tell. (I have not ever taken one apart, but it is almost certain that it is a glued screen, which explains why some people are having peeling issues (my Evo had this.))
There is not much for the Epic but some info for the original Galaxy S
http://forum.xda-developers.com/showthread.php?t=745262
Dissemble of Galaxy S:
http://www.careace.net/2010/06/09/disassembly-of-the-samsung-galaxy-s/
and there are some tear-down pics of the Epic
Thats prob all info there is :/
APOLAUF said:
You sure you got the right screen? Epic uses SAMOLED, not LCD... also, the digitizer and the LEDs are part of the same construct (one of the reasons it's "super"), so you'd effectively be really just changing the display with integrated digitizer. The glass itself is glued to the plastic case. You'd need to find a way to pull it up, from what I can tell. (I have not ever taken one apart, but it is almost certain that it is a glued screen, which explains why some people are having peeling issues (my Evo had this.))
Click to expand...
Click to collapse
yea i was just saying "lcd" i got the right one i know
taking a look at the links below
ok well by the looks of it, its pretty much the same thing. i talked to a tech at a repair center, and he said he MIGHT be able to do it. if not, i think i probably have about 70% chance of getting it right. the video showed a break down right down to the digitizer, and it looks almost EXACTLY like that i have, so in theory, i should just have to go as far as gettting the back off, and putting the back BACK on the NEW digitizer/amoleisupmyassed, right?
also, just for clarification, i know i have the right one bcuz i can see the button whole thingies and its the same as what the epic has (menu, home, back, search)
thanks for the useful links& help guys
Ahh sprint hooked me up put the screen on for me...mmm...such a beautiful display...
igotsthemagicinme said:
Ahh sprint hooked me up put the screen on for me...mmm...such a beautiful display...
Click to expand...
Click to collapse
Did they charge anything?
lehaman310 said:
Did they charge anything?
Click to expand...
Click to collapse
Nooooope
Any update on manuals/instructions for this? My own is out of warranty and not even running on Sprint.
Chabsin said:
Any update on manuals/instructions for this? My own is out of warranty and not even running on Sprint.
Click to expand...
Click to collapse
How is it out of warranty when it hasn't even been out for a year? or did you mod it or something?
igotsthemagicinme said:
Ahh sprint hooked me up put the screen on for me...mmm...such a beautiful display...
Click to expand...
Click to collapse
just curious...so sprint installed the screen you purchased or they installed one of their own? I had to do this on an htc phone a while back and it was much easier than I imagined.
Sent from my SPH-D700 using Tapatalk
I purchased a bad esn phone off ebay. I run it on a different network. You think a Sprint store would do something for me?!
Demianwulf said:
I had to do this on an htc phone a while back and it was much easier than I imagined.
Click to expand...
Click to collapse
I've watched a video for another galaxy phone ... the reason I'm nervous about this one is because on the Epic the screen is on a separate part of the assembly because of the keyboard.
Also: The video shows how to take it apart .. but not how to put it together again. Do I need to glue it together again? What type of glue?
Chabsin said:
I've watched a video for another galaxy phone ... the reason I'm nervous about this one is because on the Epic the screen is on a separate part of the assembly because of the keyboard.
Also: The video shows how to take it apart .. but not how to put it together again. Do I need to glue it together again? What type of glue?
Click to expand...
Click to collapse
If your seriously considering using glue...crazy glue is the way to go >.> (pun intended)
I still don't understand, why are you out of warranty? samsung offers a 1 year warranty...
does one not have to deal with sprint?
Does changing the software so that it runs on a different network not void the warranty?
Sent from my SPH-D700 using XDA App
Chabsin said:
does one not have to deal with sprint?
Does changing the software so that it runs on a different network not void the warranty?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
No even though Sprint has it in their system as marked "bad esn" samsung will not have to do with this. Although I don't think Samsungs warranty covers accidents, such as dropping your phone and cracking the screen.
Hope you get it figured out!
Sincerely,
D3luSi0n4L
Chabsin said:
does one not have to deal with sprint?
Does changing the software so that it runs on a different network not void the warranty?
Click to expand...
Click to collapse
Well Samsung has their own warranty thing...but I would confirm by contacting Samsung..don't tell them you swapped networks or anything of course..otherwise I don't think they would bother to check...
You can always flash it back too..unless phone doesnt work completely?
I got the whole screen + keyboard for under $60 on ebay. It turned out to be as simple as unscrewing and unsnapping the cover, disconnecting three connectors, removing the electronics and putting them in to the new frame. If I'd have to do it again it wouldn't take more than 15 minutes.
Sent from my SPH-D700 using XDA App
Please see attachment, it is a screenshot similar to the problem I have.
A part of the screen is not touch-respondsive. It only happened recently, never had this problem before.
Possible to fix? I have trouble unlocking the 9 dots pattern everytime I turn on the phone because of this problem.
Please help, thanks.
Never mind, flashed a different kernal and its working now.
edit: Wait, no it's still there.
update: I wiped everything and installed factory 4.2.2 patch (occam-jdq39-factory-345dc199.tgz) but still cannot fix this problem. Please help!
update: Tried this method http://forum.xda-developers.com/showthread.php?t=2027476 still not working :crying:
update: This also not working for me http://forum.xda-developers.com/showthread.php?t=2163924... possible hardware issue?
verdict: I will live with this for now, after 1 day and still can't fix it then I will contact google hopefully for a replacement.
bump
I am having the exact same issue. That almost makes me think it could be a software issue but you said you already did a factory reset.
The weird thing is that it looks like the same part of the screen. Its a horizontal section in the very middle.
My best conclusions are that its the digitizer. It just started happening out of no where though. Very frustrating. Makes it impossible to hit the send button on the stock messaging app without minimizing the keyboard! I take excellent care of my Nexus 4. It has a case and it hasn't been dropped. It hardly has a scratch on it! Its a month old.
Sent from my Nexus 4 using xda app-developers app
Strongertyer I can feel your frustration.
Here's mine (the one in my op was found from google). Mine is a bit lower, it blocks the top half of the qwer line on the keyboard and the yes/no buttons on prompt windows.
I can still type qwer just fine by pressing the bottom half of the keys, but for the the prompts I have to tilt and rotate the screen every time so the buttons aren't under the "dead zone".
Strongtyer are you also thinking of sending the phone back to Google?
Sent from my Nexus 4 using xda app-developers app
Just talked to support and they seemed helpful. However, his first suggestion was to do a factory reset of course. He said if that didn't work then I could send my phone back for a replacement. Did a factory reset and still the same issue. Looks like I'll be calling again tomorrow.
I guess the plus side is that they send brand new phones and not just refurbished ones.
Any luck on your end?
Sent from my Nexus 4 using xda app-developers app
I gave up fixing it already as you can see in my 2nd post and I believe it is not possible to fix it other than having the whole screen replaced, so I asked directly for a replacement under warranty. Then after a brief moment google emailed me a set of instructions for packing the phone.
So on Sunday evening I booked the courier, printed the documents, picked everything back in the box, warped and taped it. And today the courier came and collected my phone.
Now I have to use my good old HTC Legend again. However it uses regular SIM card, so I had a bit of fun making myself an adapter to up size the Nexus 4's micro-sim!
I talked to Google today and they are sending me a replacement. They told me I can keep the phone till the new one arrives. I just have to return it within 21 days.
Just crossing my fingers that they don't say the damage is my fault. I don't know how o could have caused it. I haven't does it and I take really good care of it.
Sent from my Nexus 4 using xda app-developers app
Same problem
I do have a same touch screen problem.
Sliding vertically is not smooth and cannot clicking, but swiping horizontally is working.
im also having this problem but i dont live in the US. how can i go about fixing it?
redsuns said:
im also having this problem but i dont live in the US. how can i go about fixing it?
Click to expand...
Click to collapse
You should contact google anyway if you want a warranty replacement. Go to the link below, click contact google, answer a few check box questions and there should be a phone number.
https://support.google.com/googleplay/answer/2411741?hl=en&ref_topic=2803008
Because I believe that the only way to fix this is to have the screen replaced.
Have the same problem here. I have the phone for 1 month now.
I live in the Netherlands and the nexus 4 did not get official release here. Should I still contact Google?
Could it be this problem only happens with the newer phone's? I have the one with the little feet on the back. Version 605 I thought. What version do you guys have?
Also should I unroot and lock the boot loader when I send it in for repair ?even though the problem has nothing to do with it.
Sorry for the poor English...
herrieherrie said:
Have the same problem here. I have the phone for 1 month now.
I live in the Netherlands and the nexus 4 did not get official release here. Should I still contact Google?
Could it be this problem only happens with the newer phone's? I have the one with the little feet on the back. Version 605 I thought. What version do you guys have?
Also should I unroot and lock the boot loader when I send it in for repair ?even though the problem has nothing to do with it.
Sorry for the poor English...
Click to expand...
Click to collapse
Welcome to xda-developers. Your English is fine.
You should contact Google.
Interesting that you mention the newer version of the phone -- I'd be interested in knowing if this is in fact a result of a newer manufacturing process, different materials, or maybe the place of manufacture (Korea or China). The place of manufacture can be identified by the letter in the fourth position of the serial number found on the box.
can someone update us on this issue? I have the same problem and i am so sad! I saved up 8 months to get this phone!
2nd
herrieherrie said:
Have the same problem here. I have the phone for 1 month now.
I live in the Netherlands and the nexus 4 did not get official release here. Should I still contact Google?
Could it be this problem only happens with the newer phone's? I have the one with the little feet on the back. Version 605 I thought. What version do you guys have?
Also should I unroot and lock the boot loader when I send it in for repair ?even though the problem has nothing to do with it.
Sorry for the poor English...
Click to expand...
Click to collapse
yup just to chime in same problem here too .. its pretty widespread !
Same ISsue - Nexus 4
jeetash said:
yup just to chime in same problem here too .. its pretty widespread !
Click to expand...
Click to collapse
well, its certainly a hardware issue.
Digitizer, for what I know.
But no easy solution.
Would have happened due to the faulty charger.
But google is not helping!
I have the same exact issue. Playing PVZ2 is now extra difficult because of this issue.
Is there any other fix other than an RMA (currently not in the US)? :crying:
Verbl Kint said:
I have the same exact issue. Playing PVZ2 is now extra difficult because of this issue.
Is there any other fix other than an RMA (currently not in the US)? :crying:
Click to expand...
Click to collapse
Fixed with the update to KitKat!
Posted via Tapatalk
Verbl Kint said:
Fixed with the update to KitKat!
Posted via Tapatalk
Click to expand...
Click to collapse
I have this same screen issue. Mine is is first row from top which makes it very frustrating. I am on 4.4.2 and still have this issue.
Can you describe what you've tried in more detail?
I have the same problem but mine is like 2 inches from the bottom of the screen. I can use the softkeys in portrait but they are unusable in landscape. I have had the phone since Nov 12 so sadly my phone is now out of warranty. LG's approved repair centre want £95 for a new screen. I am thinking maybe buy a Nexus 5 and trade this in for £70. I could sell it for like £130 but I would feel bad selling a phone I know the screen is on its last legs.
Hi, I just bought a Note 3 off eBay, it was listed as the AT&T variant of the Note 3. I received the phone earlier today and the 1st thing I did was went straight to the settings to see if everything was up to par.
In settings under about device it says its running 4.4 and the model number is SM-N9006. I did a quick Google search and came up with mixed results, some said it was the Chinese version of the Note 3 and some said it was a Note 3 clone.
I did a benchmark test and it doesnt look like the hardware is what its suppose to be, it actually listed it in the rankings as below the S3.
Any feedback would be great, I do have a 14 day return on this. Thanks a lot everyone.
KuRuPtIoN said:
Hi, I just bought a Note 3 off eBay, it was listed as the AT&T variant of the Note 3. I received the phone earlier today and the 1st thing I did was went straight to the settings to see if everything was up to par.
In settings under about device it says its running 4.4 and the model number is SM-N9006. I did a quick Google search and came up with mixed results, some said it was the Chinese version of the Note 3 and some said it was a Note 3 clone.
I did a benchmark test and it doesnt look like the hardware is what its suppose to be, it actually listed it in the rankings as below the S3.
Any feedback would be great, I do have a 14 day return on this. Thanks a lot everyone.
Click to expand...
Click to collapse
have a look at the build number see if its 111111111 and if its white does it have a black spen
jaythenut said:
have a look at the build number see if its 111111111 and if its white does it have a black spen
Click to expand...
Click to collapse
Build number is JSS15J.N9006ZCUBMI5
It is white and it does have a Silver/Chrome S Pen with Samsung on the handle.
KuRuPtIoN said:
Build number is JSS15J.N9006ZCUBMI5
It is white and it does have a S Pen with Samsung on the handle.
Click to expand...
Click to collapse
sounds ok does air gesture work if so your good
i think lol
jaythenut said:
sounds ok does air gesture work if so your good
i think lol
Click to expand...
Click to collapse
How does air gesture work?
KuRuPtIoN said:
How does air gesture work?
Click to expand...
Click to collapse
hover the pen over the screen and press the spen button
and should work when pulled out
When I pull the pen out a lil menu on the bottom right pops up but when I wave it in front if the screen nothing happens.
Here's a screen shot of the air gesture menu, see it says "ware" instead of "wave"? Lol
KuRuPtIoN said:
When I pull the pen out a lil menu on the bottom right pops up but when I wave it in front if the screen nothing happens.
Here's a screen shot of the air gesture menu, see it says "ware" instead of "wave"? Lol
Click to expand...
Click to collapse
fake i think
Try this app
http://forum.xda-developers.com/showthread.php?t=2642187
Ware not wave
Don't worry about spelling mistakes there are a few through the menus. Has anyone ever noticed the equalizer spelt equaliser in the music menu? There are a few you just have to look. But if your getting antutu scores on par or lower than an S3 then you have the mediate mtk processor and it is a fake for sure.
KuRuPtIoN said:
Hi, I just bought a Note 3 off eBay, it was listed as the AT&T variant of the Note 3. I received the phone earlier today and the 1st thing I did was went straight to the settings to see if everything was up to par.
In settings under about device it says its running 4.4 and the model number is SM-N9006. I did a quick Google search and came up with mixed results, some said it was the Chinese version of the Note 3 and some said it was a Note 3 clone.
I did a benchmark test and it doesnt look like the hardware is what its suppose to be, it actually listed it in the rankings as below the S3.
Any feedback would be great, I do have a 14 day return on this. Thanks a lot everyone.
Click to expand...
Click to collapse
Just download Samsung info from Play store and see results without wasting time.
probably something like this : http://www.fastcardtech.com/HDC-Galaxy-Note-3-N9006.html
I already contacted the seller and he's issuing a refund. I figure I might as well get the AT&T version I wanted since they are both about the same price. I'm gonna check out Swappa and try and get my phone from there. Thanks to everyone who replied and helped! ::victory:
KuRuPtIoN said:
I already contacted the seller and he's issuing a refund. I figure I might as well get the AT&T version I wanted since they are both about the same price. I'm gonna check out Swappa and try and get my phone from there. Thanks to everyone who replied and helped! ::victory:
Click to expand...
Click to collapse
Glad to hear you've got it solved.
webjunky said:
fake i think
Click to expand...
Click to collapse
You think?
It's fake.
The Air Gesture menu is full. It's NEVER all white.
"Ware your hand"? China being morons again and not knowing how to utilized the worlds most used language....
rockyfarted said:
Don't worry about spelling mistakes there are a few through the menus. Has anyone ever noticed the equalizer spelt equaliser in the music menu? There are a few you just have to look. But if your getting antutu scores on par or lower than an S3 then you have the mediate mtk processor and it is a fake for sure.
Click to expand...
Click to collapse
Equaliser is correct. Same as defence, centre, colour etc. just depends where you come from.
Ware however is wrong.
I have a AT&T Samsung S4 (i337) in which the screen has stopped working after being dropped. I have taken it apart and have tried ordering a replacement online. But I have gone through two screens I have ordered online and both as well have not worked right, in this case the touch digitizer. I am wondering if anyone here knows a good place to get replacement screens that are likely to work?
Maybe it's not the screens that aren't working. Maybe you're connecting them wrong or damaged a part when replacing the screens. I think you should let a professional do it. Or at least somebody who has done it before
GDReaper said:
Maybe it's not the screens that aren't working. Maybe you're connecting them wrong or damaged a part when replacing the screens. I think you should let a professional do it. Or at least somebody who has done it before
Click to expand...
Click to collapse
I doubt that, I have fixed multiple phones, and other electronics devices, before and I know it is connected right.