If I swipe right on a contact, make a call, but exit out of the call window and hit the dialer on screen, it doesn't show the current phone call. It just shows the default dialer. The only way for me to end a phone call is to use the drop down menu.
Basically, it is really annoying and I am wondering if it is just some small user error that I am committing.
I have been running LP since 30 min of getting the phone (couldn't stand TW interface) and almost a week with my phone here and no problems with LP at all. Try reinstalling the app or doing a master reset.
Mark271 said:
If I swipe right on a contact, make a call, but exit out of the call window and hit the dialer on screen, it doesn't show the current phone call. It just shows the default dialer. The only way for me to end a phone call is to use the drop down menu.
Basically, it is really annoying and I am wondering if it is just some small user error that I am committing.
Click to expand...
Click to collapse
I noticed that earlier today when I was reading a tracking number to someone over the phone. It's such a pain. I just tested it today, went back and forth between Launcher Pro and TouchWiz. I hope it's not something that will be too difficult for the Launcher Pro devs to fix, and not some weird TouchWiz thing that can'e be worked around.
I have noticed the same issues with not being able to easily get back to an in progress call. If you press and hold the home button you can then tap on the dialer and get back to your call no matter what launcher your using. ADW does the same thing by the way. This is why I have not been able to jump to either alternative launcher.
I thought this happened because the dialer shortcut was linked to whatever action the pull down status bar icon was assigned to, but even if I create a home screen shortcut to the dialer, it still works the way it should while in TouchWiz.
I started a thread on the Launcher Pro forums. I copied and pasted the above onto it.
Edit: None of the Activies under either of the Dialer menus seem to work. I thought I could find whatever that static icon does and create my own shortcut.
ahorriblemess said:
I just realized... this is obviously because the static/unremovable dialer icon in the TouchWiz dock is linked to the same action as using the pull down menu and tapping the dialer icon. Still, I wonder if there's a workaround for this.
I started a thread on the Launcher Pro forums. I copied and pasted the above onto it.
Edit: None of the Activies under either of the Dialer menus seem to work. I thought I could find whatever that static icon does and create my own shortcut.
Click to expand...
Click to collapse
The contacts for me does not work by default either. I had to replace their contacts shortcut by long pressing and changing shortcut with the application contacts stored in our phone. I am sure this has to be an easy fix.
Hey guys, I'm running a Sense build (Phiremod's Ace build) and having a problem with the HTC dialer's answer/reject call slider. (note that this is a problem with any of the Sense builds - not picking on Phiremod's.)
I pocket carry my HD2 and since the Sense answer/reject is an up and down slider, i always wind up answering or hanging up the phone when I pull it out of my pocket.
Does anyone have any ideas to change the incoming call behavior? I know I can remove the HTC lock screen, but the answer/reject slider is apparently part of the dialer (which I love otherwise). I used S2U2 on WinMo, and have been digging around for an Android alternative. Is there any way to get the stock Android answer/reject slider (left to right) on Sense without losing the HTC dialer?
Thanks,
Ryan
+1. Have the same problem
+1, the sense lockscreen makes no sense. Unlocking in pocket, answering can be done just by looking at it from wrong angle...HTC must come up with something quick. Can't even call that a lockscreen
Sent from my HTC HD2 using XDA App
+1
happened a lot of time to me... I'm happy to know that I'm not alone...
Im not sure why HTC made the slide up and down like that it really doesn't make any sense. On the WimMo sense it slides side to side.
Count me in Big relief to see others with the same "challange". In my case it often answers call without me knowing it when its in my pocket.
+1
This is the only reason I avoid Sense. Phone upside down with the screen facing my leg is the only position that works (ie makes it easy to check the screen by pulling it out of my pocket). Unfortunately, that also declines every call I try to answer.
+1 !!! anyone?!?!
solution found!
OK i hope you guys see this - i found a solution -
just install this .apk, it presents a screen with two simple buttons (answer\decline) instead of having to slide. works like a charm no more leg\but answering declining calls
I had this problem also. Just go to system/app and you'll see htclockscreen.apk and htclockscreen.odex. You can rename or delete them but I just moved them to a folder within system/app so they're not loaded. Once done, reboot and you'll get the stock lock screen.
hey tnx mr_dilly, i actually know that, but even after going back to the stock froyo lockscreen, when getting a call you still get the htc answer\decline slide screen which is, as mentioned, crap..
omricn said:
OK i hope you guys see this - i found a solution -
just install this .apk, it presents a screen with two simple buttons (answer\decline) instead of having to slide. works like a charm no more leg\but answering declining calls
Click to expand...
Click to collapse
You wanna printscreen that app?
Sent from my HTC Desire using XDA App
omricn said:
hey tnx mr_dilly, i actually know that, but even after going back to the stock froyo lockscreen, when getting a call you still get the htc answer\decline slide screen which is, as mentioned, crap..
Click to expand...
Click to collapse
Sorry, omricn. Overlooked that bit. I thought the slide to answer went away because I got the answer/reject buttons but apparently it changes once the phone is actually locked.
I use a android build without sense. Is there any app to unlock power button?
I often get a call while my phone is in my pocket and then accidently press my power button, so the call will be rejected.
Bib_x said:
I use a android build without sense. Is there any app to unlock power button?
I often get a call while my phone is in my pocket and then accidently press my power button, so the call will be rejected.
Click to expand...
Click to collapse
are you sure the power button is the issue? how does your incoming call screen look like? it could be the same issue that i had, the slider responded to the insides of my pocket, i dont believe the power button is being pressed unless you're wearing very very tight pants
I don´t have a sense build.
I get no slider, only the answering buttons on my screen. But hardware buttons are working too. When i put my phone from my pocket i often touch my hardware power button and then the incoming call is ended.
I use proximity screenoff, so screen is blank and i can´t touch any button on my display. If i press power button, the incoming call is rejected.
I want to have a slider on my display and hardware buttons should be locked complete. Only answering a call with something on my display, but not with hardware button.
understood.. i'll be sure to let you know if i find a solution
Hi All!
The biggest problem with Sense in my opinion is the slide for unlock/answer screen. The engineer that came up with that design should get a serious *****-slap. Replacing the lock screen is fairly simple though, e.g by WidgetLocker. Replacing the slide (up/down) to answer is not that simple because it's part of the dialer, not the lock screen.
So if you like HTC sense and the sense dialer, I think you have to stick with the slide up/down for answer. I'm sure that some clever dev eventually will iron out the problem, but currently I see no solution.
Agree with every word..
Hey guys, just wondering if it was possible to change the incoming call screen on my Epic 4g from the "drag the picture/icon in the middle up or down" one that's standard on the epic to the horizontal sliding unlock screen. I can't post pictures yet so I can't really show what I'm talking about, sorry.
My mom has the LG Optimus S, and her phone has the incoming call screen I'm talking about. Slide an icon from left to right, and you pick up. Slide an icon from right to left, and it ignores the call.
Thanks!
i'd like to know if this is possible also.
If you searched you would realize this has been discussed before. you want the aosp incoming call screen. Right now the imply way to get it is to install cm6
Sent From Da Hood.
so, it's impossible to change incoming call screen from third party software
so sad
I wonder why anyone would want the AOSP incoming call screen when the TW call screen has that handy "ignore with text" button on it.. Plus you get a lil picture of the person calling you.. Not to mention if you miss a call, you get the "slide to missed call" thing on your lock screen
it seems to me that the tw incoming call screen is objectively better in that it provides more functionality... so, if you don't mind me asking, why are you so eager to switch to the AOSP incoming call screen?
Here's a peculiar issue and I'm trying to resolve it.
Whenever a call is made using CM10/CM9 the dialer automatically minimizes in background because Service Provider sends a message saying what discount is available on this call. Probably to show the message, dialer minimizes itself.
I have to go back to the notification drawer, select current call and then go back to the call after hitting okay at the message. This is very annoying, specially when speaker phone is not enabled and I'm unable to drag down the notification drawer because proximity sensor detects my hand too close to the display.
Point is this doesn't happen in stock ROMs, any of them be it ICS/GB. I tried replacing the dialer from stock but its integrated in CM10 framework thus replacing files doesn't help. I tried some dialer apps, they do work by not getting minimized but then I don't really like using them, CM10 dialer or stock dialer looks much better than custom ones.
Probably this issue doesn't happen to much or rather any fellow member here, but would appreciate some input that can help me fix the problem.
When I make a call the nav bar is present, when I get a call while using the phone the call interface is smaller so I can still use the phone. But when I get a call while not using it the nav bar is gone (both while ringing and after answering) and the interface feels the need to take all 5.8" of space so I can't use the rest of the phone at the same time.
This is so annoying for me, anyone has the same problem? Some information : I'm using ExDialer but the actual call interface is stock. Nova launcher and I don't lock my phone.
Help