Database Users

[Q] [Help] Can't get any Os on my Leo :(

I followed this guide:
w w w.jayceooi.com/2011/01/07/how-to-install-nand-android-on-htc-hd2-with-clockworkmod-recovery-video
and now i dont have any OS on my htc, it just sais
booting android from nand
and it keeps getting stuck at Go Go GO!!
help me!

hallamartin said:
I followed this guide:
w w w.jayceooi.com/2011/01/07/how-to-install-nand-android-on-htc-hd2-with-clockworkmod-recovery-video
and now i dont have any OS on my htc, it just sais
booting android from nand
and it keeps getting stuck at Go Go GO!!
help me!
Click to expand...
Click to collapse
I would get another ROM and reflash it, whether it's a ZIP ROM (CWM) or a NAND ROM via DFT.

it would be awsome if you could send me a link to a good rom? android or windows? realy need this to work

hallamartin said:
it would be awsome if you could send me a link to a good rom? android or windows? realy need this to work
Click to expand...
Click to collapse
Well there's lots of good roms out there... they are all very easy to flash back and forth from. I hate to say which one is "better" than another as that is purely subjective and everyone has a differing opinion. However, it seems a lot of people really like Sergios, MDJ's and CMYXLGO's ROMs. As a start you may want to check out one of those... Here is a link to the main Android NAND forum.

I have
•HSPL3 ~ SPL-2.08.HSPL
•Radio that support 576 RAM
•DFT MAGLDR Bootloader
•ClockworkMod Recovery
Installed.
Can you send a link to a rom that supports clockwork? i dont realy care witch one just one that works. am e newbie in this just got the phone yesterday, and now i kinda afraid i cant fix it :/ :/

hallamartin said:
I have
•HSPL3 ~ SPL-2.08.HSPL
•Radio that support 576 RAM
•DFT MAGLDR Bootloader
•ClockworkMod Recovery
Installed.
Can you send a link to a rom that supports clockwork? i dont realy care witch one just one that works. am e newbie in this just got the phone yesterday, and now i kinda afraid i cant fix it :/ :/
Click to expand...
Click to collapse
If it turns on and will boot to the bootloader, it's fixable So don't worry that much! Try out Sergio's ROM. It supports CWM. If you do use that one be sure to back up your SD card as you have to repartition it.
The steps to install it are:
Code:
HD2 COREDROID Desire HD V1
1. Extract downloaded zip to a folder of your choice
2. Copy contents of copy_to_sd_root (initrd.gz and zImage) to the root of your sd card
3. Boot into magldr and select USB Flasher option while phone is connected to PC
4. Run DAF.exe included in the zip and follow onscreen instructions.
5. After complete devise will reboot in magldr chose "Boot AD SD" option
6. Device will boot into Clockwork Recovery
7. Select advanced
8. Select Partition SD card (remember too backup all valuable data you have on SD Card)
9. Selet (minimum 512M)(maximum 1024M) Chose what fits best for you Recomended size 1024M
10.Select Swap 0M
11.Wait for the process too finish (do not restart device stay in ClockWork recovery)
12.Connect the Device into USB
13.select mounts and storage
14.select mount USB storage
15.Copy contents of copy_to_sd_root (initrd.gz, zImage) to the root of your sd card
16.Copy CoreDroid_HD_HD2_v*.zip to the root of your sd card
17.Press back key after finish
18.Press back key once more
19.Select install zip from sdcard
20.Select choose zip from sdcard
21.Select CoreDroid_HD_HD2_v* file and then confirm
22.Wait for it too finish
23.After flash options pop up again Press back Key
24.select reboot system now
25.Let it boot wait about +-10Min Enjoy

I haven't really examined the guide you followed that much, but make sure you have installed a recent version of Magldr (i.e. the one you can download in the official Magldr thread in the WinMo subforum, version 1.11 to be precise). The first version(s) have been notorious for the Gogogo! bug persistently affecting some users.
Just a fyi, ignore this if you already have this v1.11

I got the aMagldr V1.11
The rom you sendt me doesnt work, it stopps here:
Run DAF.exe included in the zip and follow onscreen instructions.
i allredy installed a Daf.exe can that be the problem?

hallamartin said:
i allredy installed a Daf.exe can that be the problem?
Click to expand...
Click to collapse
No, because it's not really an installer, but a flasher. I'm not really an expert on the CWM issues, but it seems to me like formatting your SD card(do a full format, not the quick one) might help you, since it's quite probably your SD card being the *****.
It may not help you, but if you've got a few minutes I'd say give it a shot. Don't forget to backup important SD (NAND isn't affected) first of course!
Oh, and there's also this small chance that your CWM download is corrupt. Not sure if that would give the gogogo error though.

Sorry for being a complete newb, but how do i do the hard format?
but do i need the DAF.exe to install the rom?

You'd have to format in Windows (which I assume is the OS you're running), which now that I think of it may be a bit of a problem. I don't think you can mount your SD card with Magldr, which means that you'd have to use an external card reader. If you don't have that, you'd have to reflash WinMo to format, but since that's quite some more work for something that I can't even guarantee to be a solution you might wanna hold on to other suggestions.
DAF.exe is the tool which flashes CWM to your phone. Some other tools and/or ROMS use the same name for their flasher though.

after this one :
8. Select Partition SD card (remember too backup all valuable data you have on SD Card)
9. Selet (minimum 512M)(maximum 1024M) Chose what fits best for you Recomended size 1024M
10.Select Swap 0M
i can't do **** i cant open the device in windows. is there no way i can just system recover the whole device? or do i have to rom it?..
realy need this to be working, prefer android but windows is okey

StephanV said:
You'd have to format in Windows (which I assume is the OS you're running), which now that I think of it may be a bit of a problem. I don't think you can mount your SD card with Magldr, which means that you'd have to use an external card reader. If you don't have that, you'd have to reflash WinMo to format, but since that's quite some more work for something that I can't even guarantee to be a solution you might wanna hold on to other suggestions.
Click to expand...
Click to collapse
dosn't seem like there is allot of things i can do? i just hope i didnt brick it...
i cant send it to repair like this?

hallamartin said:
dosn't seem like there is allot of things i can do? i just hope i didnt brick it...
i cant send it to repair like this?
Click to expand...
Click to collapse
It sure is no brick, as long as you can boot into bootloader (turn on phone while keeping volume down pressed) there's no problem at all. No need to return it either.
If you feel really desperate try the WinMo thing, you've got nothing to lose except for about 30 minutes of your time.

winmo thing? is there any guide?
if i download a format program i can format the sd card..

1. Flash WinMo, this should be no problem in bootloader
2. I think it's possible to format your SD card within WinMo. I've never used WinMo actually so I can't give instructions on that.
If you can't find it or if it isn't possible, mount your SD card so you can see it in Windows. Backup data if necessary. Then right click on it (in Windows), and choose format, then disable quick format which should be selected by default. After the format you should have a clean SD card.
4. Flash Magldr again, following instructions in the official Magldr thread. Download a new copy off xda, to eliminate the possibity of just having had a corrupt download.
6. Flash CWM, following instructions in the official CWM thread.
7. Flash ROM.
Edit: I used WinMo where I meant the mobile OS, and Windows where I meant the pc OS.

I did format the SD card, nothing new just that CWM disapeard.
Now its loading with aMagldr v1.11
And i Have Spl-2.08. Hspl 8g Xe
Can anyone send me a link to a good Win 6.5 rom and anykind of guide?

I Can't install any NAND on my HTC HD2

hi together,
i have many problems with my HD2, i have try to install a nand over MAGLDR v1.13 + DAF but when i try to install it with ROMUpdateUtility.exe it loads and i can click update, but then nothing happens only 0% nothing more.
I try it then with another tutorial that told me to install a radio first, but the same problem it loads 4% and told me that i have a wrong version or handy or somtehing.
Can someone Help me or told me hhow i can install it on another way?

you run daf.exe not the file you are running

heima77 said:
hi together,
i have many problems with my HD2, i have try to install a nand over MAGLDR v1.13 + DAF but when i try to install it with ROMUpdateUtility.exe it loads and i can click update, but then nothing happens only 0% nothing more.
I try it then with another tutorial that told me to install a radio first, but the same problem it loads 4% and told me that i have a wrong version or handy or somtehing.
Can someone Help me or told me hhow i can install it on another way?
Click to expand...
Click to collapse
You Need to start Over ..
I Would Task29 - then follow the directions here ..
Has everything you need ..
http://forum.xda-developers.com/showthread.php?t=981811

heima77 said:
nothing happens only 0% nothing more.
Click to expand...
Click to collapse
Wrong / missing hspl. Check in bootloader.
Hspl4, 2.08.hspl

thank you i have update the hspl to 2.08 and installed MAGLDR and i have installed an old Android, i want a newer one but my problem ist, the most NAND versions have only and unpacked version of android and i dont understand how i can install them with the DAF.exe because there is no system.img or something or what do i wrong?
i want to install one of this 2 versions:
http://forum.xda-developers.com/showthread.php?t=908528
http://forum.xda-developers.com/showthread.php?t=918899
or can you told me another good android 2.3 nand that i can easy install?
important for me is that there is no freeze and a good battery life and that i can install apps.
another question how can i use the micro sd card?
thanks a lot

Once in magldr u need to choose usb flasher and then connect ur fone with ur computer and click daf.exe it should do it on its own
Sent from my HTC HD2 Gingerbread using XDA App

thx, what im not understand, where must i put the folder: META-INF boot and system?
when the DAF.exe runes it says it cant load the readme.txt and when im click next there comes more erros i think it cant find the .img type file?

I think you are totally confused with files.better do some tutorial reading and start all afresh
Sent from my HTC HD2 Gingerbread using XDA App

im reading the tutorials but im not really understand why it dont work, now i have try the MDJs cya... but the same problem with the daf.exe here the error message:
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
Error Description: EnterBootloader missing
Info: .\RSPL\BootLoader.cpp (176)
what must i dooo?

The problem is that the roms u r flashing needs recovery mod..after flashing magloder u need to flash recoverymod 400mb file system via usb flasher and then format ur sd card according to to description in the rafpignas thread..once done wiyh all that copy paste the whole zip folder on sd card dont extract anything and then follow the steps on rafpignas thread to install via recovery
Sent from my HTC HD2 Gingerbread using XDA App

thank you now i found the right clockwork flash its very easy thank you very much.
post can be closed

Glad u found it ur welcome
Sent from my HTC HD2 Gingerbread using XDA App

arzin said:
The problem is that the roms u r flashing needs recovery mod..after flashing magloder u need to flash recoverymod 400mb file system via usb flasher and then format ur sd card according to to description in the rafpignas thread..once done wiyh all that copy paste the whole zip folder on sd card dont extract anything and then follow the steps on rafpignas thread to install via recovery
Sent from my HTC HD2 Gingerbread using XDA App
Click to expand...
Click to collapse
im at this point now but im stuck on how to get the zip onto my sd card
i tried magldr mass storage but it wont copy over completely
someone please help

jonsson4000 said:
im at this point now but im stuck on how to get the zip onto my sd card
i tried magldr mass storage but it wont copy over completely
someone please help
Click to expand...
Click to collapse
I've heard that Magdlr has some problems corrupting larger file transfers. Personally, I've never experienced it with v1.13. You can try using a microSD adapter and transfer it directly from your computer to the SDcard, from then on, transfer files in Android before you decide to flash.

h.nocturna said:
I've heard that Magdlr has some problems corrupting larger file transfers. Personally, I've never experienced it with v1.13. You can try using a microSD adapter and transfer it directly from your computer to the SDcard, from then on, transfer files in Android before you decide to flash.
Click to expand...
Click to collapse
thats what i usually do but since i started from square one and formatted my sd card i have nothing

jonsson4000 said:
thats what i usually do but since i started from square one and formatted my sd card i have nothing
Click to expand...
Click to collapse
Flash CWM, then use the USB Mass Storage function from the partitions menu as another method.

h.nocturna said:
Flash CWM, then use the USB Mass Storage function from the partitions menu as another method.
Click to expand...
Click to collapse
figured out how to do it through clockwork thanks for your help

missing hspl

[Q] Problems flashing WP7 (Any ROM)

Whenever I try flashing a Windows Phone 7 rom to my HD2, i always get an error when it is about 3/4 of the way through flashing 4 partition. This is the error
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: flash write failed.
Info: .\RSPL\RSPL.cpp (710)
I tried it with both MAGLDR v1.12 and 1.13 and switched SD cards multiple times. I tried switching computers as well as cords. I even tried flashing and older version of LEO70 that I am positive worked months ago. Any ideas? Thanks!

Hi
WHat have you done so far and what have you come from?
I assume youve, hdpsl, radio, magldr then attempt to flash the rom?
What size cards have you tried?

Well I've flashed multiple MAGLDRs, i have a 2gb Micro SD card that works and a 16gb card that I believe is corrupted, but i'm getting the same result from both cards so I don't know if the issue is the MicroSD card.
I'm pretty sure i have the correct HSPL and radio because I flashed the original LEO70 rom way back in January and haven't really modified anything since then. I did load Android on the NAND, but I should think flashing the same exact LEO70 rom with the same laptop should work? So I don't think the HSPL or radio are the issues either.
Thanks for the quick response!

did you reformat your card before flashing wp7?

I'm trying that now... I just flashed a WMO 6.5 ROM and it works perfectly. My computer recognized the 200mb partition on both the cards but is having a hard time formatting the 16gb card (which is most likely corrupted). Is a 2gb SD card enough for WP7?

knollster said:
I'm trying that now... I just flashed a WMO 6.5 ROM and it works perfectly. My computer recognized the 200mb partition on both the cards but is having a hard time formatting the 16gb card (which is most likely corrupted). Is a 2gb SD card enough for WP7?
Click to expand...
Click to collapse
Yh it is barely, i had an old class 4 one, but it was pretty slow.
It would tell you its the card though, although i suspect it is the partition that is the problem.

It worked!
Formatting the SD card worked! I went on the SD card website and downloaded a designated SDFormatter to fix the 16gb card, and thats what i'm using in it now. Thanks for the help!

knollster said:
Formatting the SD card worked! I went on the SD card website and downloaded a designated SDFormatter to fix the 16gb card, and thats what i'm using in it now. Thanks for the help!
Click to expand...
Click to collapse
No probs

help please
knollster said:
Whenever I try flashing a Windows Phone 7 rom to my HD2, i always get an error when it is about 3/4 of the way through flashing 4 partition. This is the error
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: flash write failed.
Info: .\RSPL\RSPL.cpp (710)
I tried it with both MAGLDR v1.12 and 1.13 and switched SD cards multiple times. I tried switching computers as well as cords. I even tried flashing and older version of LEO70 that I am positive worked months ago. Any ideas? Thanks!
Click to expand...
Click to collapse
hello, I have the the same problem. I have a original rom from htc, Hard SPL 2.08, Magldr 1.13, and already experimented with two different SD cards, format always the sd card before trying to flash the phone.
but the result is always the same
someone can help?

FilSex said:
hello, I have the the same problem. I have a original rom from htc, Hard SPL 2.08, Magldr 1.13, and already experimented with two different SD cards, format always the sd card before trying to flash the phone.
but the result is always the same
someone can help?
Click to expand...
Click to collapse
Hello, is your system win vista? Make sure that you are in Admin mode.

knollster said:
Whenever I try flashing a Windows Phone 7 rom to my HD2, i always get an error when it is about 3/4 of the way through flashing 4 partition. This is the error
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: flash write failed.
Info: .\RSPL\RSPL.cpp (710)
I tried it with both MAGLDR v1.12 and 1.13 and switched SD cards multiple times. I tried switching computers as well as cords. I even tried flashing and older version of LEO70 that I am positive worked months ago. Any ideas? Thanks!
Click to expand...
Click to collapse
Received my micro sd card through post today, so tried flashing a wp7.5 rom.
I get the same issue, and when the rom actually boots up it says sd card missing.
Now it's definately not the micro sd cards fault as before flashing the rom I formatted it, and it's absolutely new, class 4 4gb.
I've got the right version of radio and hspl..
What've I done wrong? I've tried flashing both HD2O© v2.00b5 WP7 TANGO 8773 and HD2 Pdaimatejam Rom Wp7.5 Tango 7.10.8773.98 v7.9
Can someone tell me what i'm doing wrong? Because I've had a fully functioning android 2.3.7 cm 7.2 rom on the device and that ran faultlessly.
Regards,
Edit: I did 10. Services, 4. UseLast24NAND
* 10. Services, 5. ClearSD MDR
and it's now working!

pethd2 said:
Hello, is your system win vista? Make sure that you are in Admin mode.
Click to expand...
Click to collapse
thanks for the fast reply. no my system is win 7, and I run as admin.

FilSex said:
thanks for the fast reply. no my system is win 7, and I run as admin.
Click to expand...
Click to collapse
Hi mate try doing this on MAGLDR, go to Services, then click option 4. UseLast24NAND press yes
Then click on option 10 again, Services then option 5. ClearSD MDR.
After doing both those steps go onto usbflasher and flash the rom you wish.
Worked a charm for me.
Regards,

Tenpin said:
Hi mate try doing this on MAGLDR, go to Services, then click option 4. UseLast24NAND press yes
Then click on option 10 again, Services then option 5. ClearSD MDR.
After doing both those steps go onto usbflasher and flash the rom you wish.
Worked a charm for me.
Regards,
Click to expand...
Click to collapse
and also check/reinstall WMDC if have any problems with usb drivers and recognizing HD2

Tenpin said:
Hi mate try doing this on MAGLDR, go to Services, then click option 4. UseLast24NAND press yes
Then click on option 10 again, Services then option 5. ClearSD MDR.
After doing both those steps go onto usbflasher and flash the rom you wish.
Worked a charm for me.
Regards,
Click to expand...
Click to collapse
now works
thanks

FilSex said:
now works
thanks
Click to expand...
Click to collapse
lol thought so, I think op's of rom threads should make it a little more clearer on the instructions part, as we've both realised it's so easy to miss the part out and **** up the entire installation.
Sent from my NexusHD2 using xda premium

Tenpin said:
lol thought so, I think op's of rom threads should make it a little more clearer on the instructions part, as we've both realised it's so easy to miss the part out and **** up the entire installation.
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
well done (although those instructions are in the threads hehe))

FilSex said:
now works
thanks
Click to expand...
Click to collapse
thks Work for me also

Thanks!!!
Tenpin said:
Hi mate try doing this on MAGLDR, go to Services, then click option 4. UseLast24NAND press yes
Then click on option 10 again, Services then option 5. ClearSD MDR.
After doing both those steps go onto usbflasher and flash the rom you wish.
Worked a charm for me.
Regards,
Click to expand...
Click to collapse
Thank you so much!!! I was going CRAZY!!!

Still not flashing
I tried everything above and it still refused to flash. I even started again from the beginning and it still didn't work. I formated the SD with SD formater, then I installed HSPL, I installed the Radio rom, wiped (task29), installed MAGLDR, went to 10. services, clicked option 4. UseLast24NAND press yes then clicked on option 10 again, Services then option 5. ClearSD MDR and finally, I flashed the Win 7.8 Rom.
Still got the message in the original post.
Please help!

Whole CoreDroid1.7 is crashing on HD2

Hello there,
first of all excuse me if some of my phrases are wrong....
I use CoreDroid 1.7 NAND on my HTC HD2
I installed it normally and i worked 1 month with it everything okay till today.
I downloaded some apps etc...
after a day i opened a game and it didnt start (black scrreen) i wait for more than 5 minutes but nothing happen so i put out the Battery of my phone.
After i switched it on The First screen of CoreDroid appears. It asked what my provider is etc.. the normal questions and than it sets up the phone again.
After this i saw all my App are missing.
If i check with the Filemanager the Apps are still in Folders.
my contacts are gone. i had to connect with Internet on my HTC account to gett'em back.
And very important : there is a Message on my Phone :
=> Storage is almost full make sure that your phone has more than 512KB free space <=
THis is happening the 2nd time now. Last time i deleted anyway all to upgrade to 1.7 But this time i dont want to loose all my settings.
I hope i could describe my Problem well....
Also some informations for a better solution:
- Everytime i rebott it the first screen appears.
- On Settings my SD card appears.
- Message: Storage almost full.
I dont think the SD card is OutofOrder cuz it is shown there Free space etc ...
i use an 8GB SD card.
Thank you, i appreciate any help and if someone can ask others please do it i ust need my phone asap .
Thank you guys.

Oh Cmon Guys, please help me has someone connections to Sergio . ???
//PUSH //

I don't know itf it will help, as I'm no user of this particular distribution. Here's some generic solutions:
- Coredroid seems a big build, so it would be advisable if you create an ext partition in your SD. You can do that from the recovery app or rom manager. Usually a 1GB partition is more than enough. Be aware that this procedure will erase your SD card, so backup!
- Try to make a clean flash of your phone. Task29 to flip the bits to 0, proper repartition, etc... Before, that meant to download 3 or 4 separate apps but nowadays you can do that from a single tool. Search for HD2 Toolkit in the NAND Forums.
- While doing the clean repartition, make sure to follow the needed requirements of your particular distro. Coredroid (as most sense builds) doesn't seem to follow the standard 150 partition, and it may not fit there.
Hope it helps.

Hey thanks for ur help, i already have installed my CoreDroid on an ext partition. and Flashed with Task29 after 1 week the problems discribed came.

ShockHTC said:
Hey thanks for ur help, i already have installed my CoreDroid on an ext partition. and Flashed with Task29 after 1 week the problems discribed came.
Click to expand...
Click to collapse
Ok bro... My turn.... have you checked out our thread or read the posts at all? There are plenty of solutions to the problem...
1. Read the threads....
2. Ask in a PM someone like Aortega, Tigermoto, Ljjehl, or maybe Ray Heath, or DaDoctor, or even Sergio!
Please remember for every problem there´s a solution....

Hey thanks first of all that u take time.
After copying the CWM folder to my PC i format the SDcard (8GB => 6,4 GB shown cuz 1GB ist EXT)
I performed Task29 and now my phone wont boot but it stucks on the White Screen with green HTC letters
my PC doesnts show me my SDCard
i dont know the enxt step

Okay, i installed The magLRD but now a new problem occurs on AD-Recovery i cant go in...
=> No boot sources ( error)

Errors while trying to flash new ROM on my HD2 - [SOLVED!]

Hello everyone,
i have a problem setting up wp7/nativesd android dual booting on my HD2.
I've read all the guides and troubleshots but I don't seem to bypass my errors im getting.
So let me explain things, I own HD2 with 2.08 hspl and 2.15 radio.
My procedure:
A.)
1. Task29
2. install MAGLDR 1.13
3. (optional) repartition MAGLDR to system 300mb/45mb cache
B.)
1. (optional) services/uselast24nand and clearSD mbr
2. (optional) AD Recovery - working!
3. USB Flasher mode
4. Start DWI.exe (tried some: .., Pdaimatejam Rom Wp7.8 OS 7.10.8835.35 v8.5, DFT Ultrafruit, H2O2)
Result: Procedure B/4 always fails with an error while flashing partition 4:
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: flash write failed.
Info: .\RSPL\RSPL.cpp (710)
I get that error whatever I do. I repeat the steps from my Procedure A/1 and onwards with different (option) points written above with no success.
Can anyone please help me? I am desperate, seriously, already changed my HD2's motherboard and upper board for nothing - same problem persists.
Thank you for trying and reading!
PS.:
I've tried the above procedure with 3 SD cards, Samsung 16gb class 6, Transcend 32gb class 4, Kingston 8gb class 10. No luck

did you forget use last24nand in magldr? this not optional... this is important... be sure you confirm this step with green buttom
also check did you have activesync (XP) or WMDC (Win7/8, Vista) installed
also did you try flash WP without repartition of NAND? maybe this is problem

I did try it several times. As I said, those (optionals) are just the points where I tried to change whole procedure so I would make it work but I didn't. I DID try that 24mb nand 90% of the time. Currently I reflashed stock wm6.5 back and starting from begining. Will report to you.

It does work now! I think I did a mistake after I installed HSPL i always did task29 thank you for your help guys!
Task29 before instaling wp7 is not smart hehe