Team Win Recovery Project
Team Win Recovery Project 2.4, or twrp 2.4 for short, is a custom recovery built with ease of use and customization in mind. It’s a fully touch driven user interface – no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Team Win strives to provide a quality product.
However, it is your decision to install our software on your device.
Team Win takes no responsibility for any damage that may occur from installing or using twrp.
Android App Install Method [Preferred]:
Download the GooManager app from either location:
*Market Link
*Direct Download
Instructions:
Install the app and open it.
Tap menu then hit Install OpenRecoveryScript.
Tap Yes.
Verify that the filename displays your device's code name and hit Yes.
The file will download and your device will install the recovery automatically.
Zips To Flash Via Recovery[Thanks to Sakuta]
GT-P5100 TWRP 2.4.4.0
GT-P511X TWRP 2.4.4.0
Flash Via Odin PC/Mobile
Download - Odin Flashable Tar:
*The .tar file from here (5100 ONLY)
*The .tar file from here (5110 ONLY)
Download the appropriate file and flash in Odin.
The P5113 Can Use The file Of P5110
Click to expand...
Click to collapse
Hit Thanks If You Downloaded It
Screenshots & Credits
Credits
Zeuscluts [Me]
Shakuta [For flashable Zip file in CWM]
TWRP team for the Great Recovery
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Re: [RECOVERY] TWRP 2.4.4.0 touch recovery
zeuscluts said:
Team Win Recovery Project
Team Win Recovery Project 2.4, or twrp 2.4 for short, is a custom recovery built with ease of use and customization in mind. It’s a fully touch driven user interface – no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Team Win strives to provide a quality product.
However, it is your decision to install our software on your device.
Team Win takes no responsibility for any damage that may occur from installing or using twrp.
Android App Install Method [Preferred]:
Download the GooManager app from either location:
*Market Link
*Direct Download
Instructions:
Install the app and open it.
Tap menu then hit Install OpenRecoveryScript.
Tap Yes.
Verify that the filename displays your device's code name and hit Yes.
The file will download and your device will install the recovery automatically.
Flash Via Odin PC/Mobile
Download - Odin Flashable Tar:
*The .tar file from here (5100 ONLY)
*The .tar file from here (5110 ONLY)
Download the appropriate file and flash in Odin.
Hit Thanks If You Liked It
Click to expand...
Click to collapse
Any plans to add 5113?
Edit: I think this is a link to 5113 tar file but would need it confirmed.
https://docs.google.com/file/d/0B02Uc9IrgGXQcElzN0puZDlvRzA/preview
Geez Brain what do you want to do tonight? Same thing we do every night Pinky making the freshest ROM!
Re: [RECOVERY] TWRP 2.4.4.0 touch recovery
Use 5110 on 5113!
Sent from my SGH-T999 using xda premium
Re: [RECOVERY] TWRP 2.4.4.0 touch recovery
Ramone360 said:
Use 5110 on 5113!
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Another dumb question this it just add recovery or will this root? Thanks.
Geez Brain what do you want to do tonight? Same thing we do every night Pinky making the freshest ROM!
Re: [RECOVERY] TWRP 2.4.4.0 touch recovery
Saint Michael23 said:
Another dumb question this it just add recovery or will this root? Thanks.
Geez Brain what do you want to do tonight? Same thing we do every night Pinky making the freshest ROM!
Click to expand...
Click to collapse
this will only add new open recovery.
just like CWM Recovery.
this has a better UI.
Re: [RECOVERY] TWRP 2.4.4.0 touch recovery
zeuscluts said:
this will only add new open recovery.
just like CWM Recovery.
this has a better UI.
Click to expand...
Click to collapse
Thanks I love your UI over cw. I use it on my note 2. I jist got tje tab and want to root but haven't yet.
Geez Brain what do you want to do tonight? Same thing we do every night Pinky making the freshest ROM!
Re: [RECOVERY] TWRP 2.4.4.0 touch recovery
thanks.
Bump!
I've been using TWRP since day one on my EVO 4G LTE, the interface is much better than CWM, also CWM doesn't seem to have a system wipe option. I like to know my system is squeaky clean when I flash.
Moderator: This thread should be in the dev section, not general
---------- Post added at 08:13 AM ---------- Previous post was at 08:10 AM ----------
FYI I flashed this to my P5113 and it works just fine, so you can add the model to the list. I guess i'm a guinea pig.
The IR blaster is the only difference between it and the P5110.
Is possible , to have, a detailed guide, to use TWRP?
Thanks.
zmuda said:
Is possible , to have, a detailed guide, to use TWRP?
Thanks.
Click to expand...
Click to collapse
I think its the same as rhe normal recovery.
It has only the advance touch based.
And better UI
Not sure but if any p5113 user can test 5110 version recovery on 5113.
It would be great help.
I could but I don't own a device.
Warning.
The backup of CWM cannot be restored on TWRP.
So if you are using TWRP Recovery.
Have backup In TWRP
Sorry, but the TWRP file, install only with Odin ?
Don't existe twrp.zip file ?
Thank you.
zeuscluts said:
Not sure but if any p5113 user can test 5110 version recovery on 5113.
It would be great help.
I could but I don't own a device.
Click to expand...
Click to collapse
Yes.
Also:
zips to flash via recovery:
GT-P5100 TWRP 2.4.4.0
GT-P5110 TWRP 2.4.4.0
shakatu said:
Yes.
Also:
zips to flash via recovery:
GT-P5100 TWRP 2.4.4.0
GT-P5110 TWRP 2.4.4.0
Click to expand...
Click to collapse
Thanks mate.
shakatu said:
Yes.
Also:
zips to flash via recovery:
GT-P5100 TWRP 2.4.4.0
GT-P5110 TWRP 2.4.4.0
Click to expand...
Click to collapse
Ok thanks by me.
Saint Michael23 said:
Any plans to add 5113?
Edit: I think this is a link to 5113 tar file but would need it confirmed.
https://docs.google.com/file/d/0B02Uc9IrgGXQcElzN0puZDlvRzA/preview
Geez Brain what do you want to do tonight? Same thing we do every night Pinky making the freshest ROM!
Click to expand...
Click to collapse
Hey buddy check the OP added The P5113 TWRP Support
zeuscluts said:
Hey buddy check the OP added The P5113 TWRP Support
Click to expand...
Click to collapse
The link seems to be broken.. any mirrors for the v2.4.4.0 zip version for 5113?
sj
Sent from my GT-P5113 on PACman - 4/7 using [email protected] Pro 2.4.13
sjsharksfan420 said:
The link seems to be broken.. any mirrors for the v2.4.4.0 zip version for 5113?
sj
Sent from my GT-P5113 on PACman - 4/7 using [email protected] Pro 2.4.13
Click to expand...
Click to collapse
Hey buddy the links working fine.
The p5113 users uses the files of P5110.
Related
temporary discussion thread for slimkat unofficial build
lets keep the official thread clean, check the official thread first for more info on SlimKat
this is not a continuous development thread, again temporary discussion thread for my unofficial builds
i will try to release builds until we have official weekly builds for i9100, then i will close this thread if official weeklies comes
please no discussion of unofficial builds in the official thread, post here instead and if someone ask, point it in this thread
and as usual disclaimer
i am not responsible on your phone blah blah blah...
INSTALLATION
you need to be on 6.0.4.4 and above cwm recovery..
here:
http://mirror21.downloadandroidrom.com/file/GalaxyS2/recovery/CWM-KitKatCompatible-i9100.zip
credits to @zedomax
flash this
then reboot recovery
full wipe!!!
then flash slimkat and gapps
okkkkk that is better... thanks kroz...
Flash aborted
I tried with cwm 6.0.4.5 and i got flash aborted...
uploading to devhost now, seems android file host is not working well at the moment
i even uploaded the beta 1.1 twice yesterday, and this beta 1.4 twice this morning
subscribed
I hope You will reupload not broken update tomorrow
What is the different between 4.4 and this4.4.1?
Sent from my GT-I9100 using XDA Premium 4 mobile app
Sun90 said:
subscribed
Click to expand...
Click to collapse
hehe, thanks,
im being flooded with pm lol, that's why
I have Android 4.1.2 XXLSS with CWM Base version 6.0.3.2.
Can I install 6.0.4.4 with "Install Zip" directly on top of it?
Will I still be able to use my phone before going to SlimKat?
Thanks
bemolx said:
I hope You will reupload not broken update tomorrow
Click to expand...
Click to collapse
im uploading it now on devhost, already midnight here and my internet connection is too slow,
hope it finishes before i go to sleep, haha
alimug said:
What is the different between 4.4 and this4.4.1?
Sent from my GT-I9100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
see changelog of slim in the download link
see here for the changelog of aosp from 4.4 to 4.4.1, (if you had time to read this long changes, haha)
https://funkyandroid.com/aosp-KRT16M-KOT49E.html
Jdor said:
I have Android 4.1.2 XXLSS with CWM Base version 6.0.3.2.
Can I install 6.0.4.4 with "Install Zip" directly on top of it?
Will I still be able to use my phone before going to SlimKat?
Thanks
Click to expand...
Click to collapse
that^ i am not sure, since i never been in sammy rom for a long time so i have no idea for compatibility or special tricks for updating
make a nandroid backup first...
but i think you can use that but DONT boot into system, after flashing that zip, reboot into recovery and proceed to full wipe and rom flash
Thanks kroz for this thread for unofficial slim.
Will flash your rom and will report later. I have checked the 4.4.1 zip with a zip viewer and All is OK. No message that wrong download, can open the archive.
You mean this zip from last night is OK, or a other issue is included and you recommend for a new download?
Nice that's a xpose module gives for theme changing.
Great.....
I9100 Tapatalk 4, Rom1 Pound Rom 4.4 Kitkat
089man said:
Thanks kroz for this thread for unofficial slim.
Will flash your rom and will report later. I have checked the 4.4.1 zip with a zip viewer and All is OK. No message that wrong download, can open the archive.
You mean this zip from last night is OK, or a other issue is included and you recommend for a new download?
Nice that's a xpose module gives for theme changing.
Great.....
I9100 Tapatalk 4, Rom1 Pound Rom 4.4 Kitkat
Click to expand...
Click to collapse
just redownload from devhost, it seems i had a bad upload
I download and let you know
its up on my devhost, im off to bed, hopefully its ok now
http://d-h.st/users/kroz
ive been using that build until now, pretty stable and fast for me,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*i just themed my phone a little bit that's why its pure black in screenshot
Everything is ok. I just run SlimKat 4.4.1 Thanks for fast upload.
janki111 said:
Everything is ok. I just run SlimKat 4.4.1 Thanks for fast upload.
Click to expand...
Click to collapse
you flashed my last upload already from devhost?
kroz said:
you flashed my last upload already from devhost?
Click to expand...
Click to collapse
Yes
janki111 said:
Yes
Click to expand...
Click to collapse
you have a very fast internet, how i wish i had the same,
anyway thanks for confirmation that it works
Sent from my GT-I9100 using Tapatalk
KitKat For Noobs
Latest Version: v1.1
Latest JB bootloader REQUIRED! (10.6.1.27.1 or 10.6.1.27.5)
Disclaimer:
Code:
*Your warranty is void
*I am not responsible for broken/stolen/bricked/whatever devices
Features:
Code:
*Auto flash recovery
*Auto download CM11 or OmniROM (You pick!) & send to sd
*It fetches the LATEST nightly!
*Auto download Gapps & send to sd
*Auto reboot you into recovery
*Detailed instructions
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Running this tool on the stock ROM?
You will need to install adbd Insecure: http://forum.xda-developers.com/showthread.php?t=1687590
It's a batch script but a few utilities are required, which are packed in the zip attached to the post.
Report back :good:
Tested on cm10.2
Great work!!!!!!!!!
Works on TG?
mattia9631 said:
Works on TG?
Click to expand...
Click to collapse
No, for T only, sorry.
Sent from my TF300T on CM 11 (4.4.2) using Tapatalk 4
I'm not sure which bootloader I have right now and how do I check? I'm on CM 10.2 right now with TWRP 2.5.0.0
Edit: Went ahead and used this. Worked great.
I was curious about the kkrecovery.img: I had twrp 2.6.3.0 already installed on my tf300t, which did not work to install cm 11. I noticed after flashing kkrecovery.img that the twrp version is still 2.6.3.0. But it worked to do the install of cm11. What was changed?
Thanks.
jentink said:
I was curious about the kkrecovery.img: I had twrp 2.6.3.0 already installed on my tf300t, which did not work to install cm 11. I noticed after flashing kkrecovery.img that the twrp version is still 2.6.3.0. But it worked to do the install of cm11. What was changed?
Thanks.
Click to expand...
Click to collapse
An assert was added in the updater script, which allowed for the partition change in KitKat. You are right in saying that it is the same version of TWRP though.
jentink said:
I was curious about the kkrecovery.img: I had twrp 2.6.3.0 already installed on my tf300t, which did not work to install cm 11. I noticed after flashing kkrecovery.img that the twrp version is still 2.6.3.0. But it worked to do the install of cm11. What was changed?
Thanks.
Click to expand...
Click to collapse
It has set_metadata_recursive command support which is used in kitkat roms because of the changes google made.
Updated to 1.1.
Great
ebildude123 said:
Updated to 1.1.
Click to expand...
Click to collapse
This is greats
Thank you:good::good::good::good::good::good::good:
Fantastic
This is really great for people not willing to put up with the whole ADB stuff, worked like a charm for me.
One thing: I found the whole thing is only working if you run the "Run Me To Start.bat" from a command prompt that already has administrator privileges. Just right clicking on the bat in an explorer and selecting "run as administrator" did not work for me, somehow it can't run adb, even though the files are present in the same folder.
Thanks again for your work!
Thanks, time to play with my tablet
Sent from my Nexus 4 using xda app-developers app
Does any part of this require a touch input from the tablet??
i just recovered my tablet from a brick so im back to stock 4.2
im now trying to root and flash 4.4 rom but i have no touch as my screen is broken
i can only controll the tablet through the keyboard dock and hardare keys...
so if i try this method will i eventually get stuck somewhere in the flashing procedure where it requires a touch input on the tablet??
thanks!!
schkeet said:
Does any part of this require a touch input from the tablet??
i just recovered my tablet from a brick so im back to stock 4.2
im now trying to root and flash 4.4 rom but i have no touch as my screen is broken
i can only controll the tablet through the keyboard dock and hardare keys...
so if i try this method will i eventually get stuck somewhere in the flashing procedure where it requires a touch input on the tablet??
thanks!!
Click to expand...
Click to collapse
Unfortunately, yes, you need to be able to flash zips in recovery as that isn't automate-able. Unless twrp works with the keyboard dock,
Sent from my TF300T on CM11 (4.4.2) using Tapatalk 4
Ballls k thanks
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
schkeet said:
Ballls k thanks
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
You can use CWM instead of TWRP as the recovery. CWM uses the volume keys to install ROMs. Use the CWM from the first post in CM11.
Problem Here
Hi sorry for my english and I never install a cyanogenmod because always fail the install :crying:
I have a problem to install CM 11 on my TF300T I dont know what happen, I ready installed the JB 4.2.1 and install the TWRP and Rooted but when I tried to install the cyanogenmod always fail the installation I dont know why I try many time and I have the same message Fail what happen I need your helps guys please.
omarperoni said:
Hi sorry for my english and I never install a cyanogenmod because always fail the install :crying:
I have a problem to install CM 11 on my TF300T I dont know what happen, I ready installed the JB 4.2.1 and install the TWRP and Rooted but when I tried to install the cyanogenmod always fail the installation I dont know why I try many time and I have the same message Fail what happen I need your helps guys please.
Click to expand...
Click to collapse
Try using the tool from this thread :good:
ebildude123 said:
Try using the tool from this thread :good:
Click to expand...
Click to collapse
I try but i dont know what happen not work for me I follow the instruction step by step but when i try to install i see again the Fail message
omarperoni said:
I try but i dont know what happen not work for me I follow the instruction step by step but when i try to install i see again the Fail message
Click to expand...
Click to collapse
Are you on the 10.6.1.8 Jelly Bean Bootloader...it wont work on that.
Recoveries Up-To-Date
Samsung Galaxy Tab 2 7.0 & Samsung Galaxy Tab 2 10.1
Code:
[B][COLOR="Red"]I am not responsible for bricked devices, dead SD cards.
Use those Files on your own risk!
Don´t share my work without my permissions - you can link to this Thread[/COLOR][/B]
Why this Thread added here?
Because i hate to see bricked devices
I have seen a few guys flashing Recoverys on their Galaxy Tab 2 wich were not compiled for the Tab - some of them broke their EFS Partition because of their fault!
I compiled all recoverys from Source myself (if i don´t mentioned it different) for the Samsung Galaxy Tab 2 Family.
I hope you like my work! Don´t forget the Thanks-Button
Make sure you are using the right Files for your Device! If you have question - feel free to ask!
!!! I AM NOT SUPPORTING ATT / TMOBILE GALAXY TAB 2 !!!
!!! DON´T USE THIS FILES ON THOSE DEVICES - THIS MEIGHT BRICK YOUR DEVICE !!!
1. General information, credits etc. (this post)
2. Main Recovery Thread P31XX
3. Main Recovery Thread P51XX
4. Downloads P3100 | P3110/P3113 (TWRP, PhilZ Touch, CWM, Advanced CWM)
5. Downloads P5100 | P5110/P5113 (TWRP, PhilZ Touch, CWM, Advanced CWM)
Thanks
@Phil3759 for his PhilZ Touch and Advanced CWM
@Dees_Troy and all the TWRP-Team for this great recovery
@ketut.kumajaya for his "android_kernel_samsung_espresso10" source
@CodyF86 for CM11 tree and his forked "android_kernel_samsung_espresso10" source; but i needed to switch to CM10.2
@gr8nole for helping me make internal SD visibile in TWRP, fix Touch-Orientation etc.
@ CyanogenMod-Team (thanks @codeworkx for supporting our device) for CM10.2 source
@ All testers - Special thanks @tetakpatak !!!
@ Everyone i forgot
[#DONATETOME]
XDA:DevDB Information
[RECOVERIES] Samsung Galaxy Tab 2 Family, Tool/Utility for the Samsung Galaxy Tab 2
Contributors
Android-Andi
Version Information
Status: Testing
Created 2015-04-06
Last Updated 2017-04-30
DOWNLOADS
Please don´t mirror my files without my permissions!
Recovery Downloads for all supported devices can be found here
Click to expand...
Click to collapse
DOWNLOADS
Please don´t mirror my files without my permissions!
Recovery Downloads for all supported devices can be found here
Click to expand...
Click to collapse
Thanks for this AA! Everything in one spot. If we're dual booting and want to use Aroma Filemanager and want to use in both recoveries, then we flash in both primary and secondary, correct?
Sent from my GT-P5110 using XDA Premium 4 mobile app
@njstein read this tutorial by me: https://www.file1.info/kOZYsCO
Check Mirror Link (dev-host) for PhilZ Touch Updates. P31XX ready, P51XX in next ~ 20 Minutes
TWRP updated too. TWRP 2.7.0.1 available.
Changes
Implement "take a screenshot" feature (Commit in Review)
Like in android - press power+volume down, screenshots are saved
in /sdcard/Pictures/Screenshots (if /sdcard is mounted) or /tmp
Add support for actions triggered by key combination (Commit in Review)
Improve handling of settings storage and android secure (Merged)
Fix skipping of relative paths and lost+found in twrpDU (Merged)
Run TWFunc::Fixup_Time_On_Boot() before OpenRecoveryScript (Merged)
Check to ensure that selinux_handle is populated before using (Merged)
Fix incorrect alignment of Restore Defaults button in some themes (Merged)
Support pre-KitKat properties for update-binary (Merged)
Hey together! At the moment my mirror on dev-host more up to date, you should use those links for now until i update on file1.
This post should be sticky
I see too many people on G+ with an outdated recovery who cant update to 4.4
Recovery Switcher
Yesterday @tetakpatak linked me to "Recovery Switcher" for the Nexus 7, 2013.
I said to myself "hey i want that", i found it really interesting
So after messing with stuff i was done with my own recovery-switcher.
Recoveries and Features
Nice looking AROMA Installer
TWRP 2.7.0.1
ClockworkMod Swipe-Edition 6.0.4.7
PhilZ Touch 6.25.0
PhilZ Touch 6.25.0-Blackhawk
PhilZ Touch 6.25.0-Blackhawk-F2FS
EFS-Backup to internal Storage
Changelog inside the Tool
How to install?
Flash in your recovery like a rom, recovery or what ever can be flashed in a recovery.
Follow the Instructions.
Download
P3100
GT-P3100_Recovery_Switcher_1.0.0.zip - 35.55 MB
P3110 / P3113
GT-P3110_Recovery_Switcher_1.0.0.zip - 35.28 MB
P5100
GT-P5100_Recovery_Switcher_1.0.0.zip - 35.93 MB
P5110 / P5113
GT-P5110_Recovery_Switcher_1.0.0.zip - 35.66 MB
Credits
@Flashalot - using his "Recovery Switcher" for the Nexus 7, 2013 as base
@psndna88 - i took some icons from his Aroma ANYROM Kernel
@ slimroms - mount binary taken from AIO Aroma-Selctable Gapps for 4.3.1
@tetakpatak for linking me to this great tool and testing on P5110
@Android-Andi - All recoverys compiled from Source by me
@ketut.kumajaya for his Blackhawk-PhilZ Source
@amarullz - For Aroma Installer
@cbba - For The initial Idea
@Phil3759 - For Philz Recovery
@Dees_Troy - For Twrp Recovery
@ Everyone i forgot
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Android-Andi said:
Recovery Switcher
Click to expand...
Click to collapse
one stop shopping!! thank you sir!
www.file1.info is no longer available? Can't download anything from this thread.
jvandenbroek said:
link is no longer available? Can't download anything from this thread.
Click to expand...
Click to collapse
Super helpful thread. Thanks. Particularly liked the section pointing to the 511X recovery options thread. Successfully installed recent Omnirom on a 5113 with help found here. THANK YOU
Android-Andi said:
DOWNLOADS
Please don´t mirror my files without my permissions!
Click to expand...
Click to collapse
??????????????????????????????????
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Where' the downloads???
Recovery links lead to a dead-end....
Where's TWRP for P3113?
@Wingnut79 you can find it on my Androidfilehost, link in my Signature.
Gesendet von meinem GT-I8190 mit Tapatalk
Android-Andi said:
DOWNLOADS
Please don´t mirror my files without my permissions!
Click to expand...
Click to collapse
your downloads dont work anymore
Zachary droid said:
your downloads dont work anymore
Click to expand...
Click to collapse
Read my post above yours....
Gesendet von meinem GT-I8190 mit Tapatalk
AA is it possible to flip twrp from landscape to portrait?
Sent from my SCH-I605 using Tapatalk
QBall45 said:
AA is it possible to flip twrp from landscape to portrait?
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
No. Info about that on first page.
Gesendet von meinem GT-I8190 mit Tapatalk
Help require ! !
hello. can u please help me to update my clockwork mod ? .. i want upgrade my clockworkmod recovery from 6.0.2.7 to 6.0.4.5 or more latest . i dont know how to update clockworkmod.... would somebody plz help me in this regard? thanks in advance
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello, here is NCB 4.4.2 pre-rooted stock 1270-7280 direct from Emma
The NCB region was built for myself only so I know where it come from and if anything has been removed etc.
I am running this now on my locked bootloader XZ
Links are being uploaded
What is in it?
SuperSu 1.99
Full system root with SuperSu
XZDualRecovery 2.7.123 (V3 only)
SDCard fix (optional)
Some Screenshots..
Install instructions
If on 4.3 already..
1. Download one flashable zip to external SD (depends which one you choose)
2. Flash with a working recovery
3. Switch off
4. Flash Stripped .ftf
5. Reboot
6. Enjoy
Here are the links for you
Download Version 2
Flashable zip TORRENT or MIRROR MD5 462E76EF5012C316768DEEE883888C38
Or
Flashable zip with SDcard fix included TORRENT or MIRROR MD5 18A240EFCEAD98B2F6107A102610EC64
And
Stipped FTF TORRENT or MIRROR MD5 79B9D5AE74168AB01AE797ED72C59CB9
------------------------------------------------------------------------------------------------------------------------------
Download Version 3
Flashable zip TORRENT or MIRROR MD5 B14D8A17FD645A2C37CC25BB36BD216F
Or
Flashable zip with SDcard fix included TORRENT or MIRROR MD5 B6B948CA468B18709A6FF9A79739BD2C
And
Stipped FTF TORRENT or MIRROR MD5 79B9D5AE74168AB01AE797ED72C59CB9
Please NOTE... If you want to keep data you will need to UNCHECK DATA in WIPE section
NOTICE... This version 2 recovery does not work with sdcard1 version 3 recovery does
Changelog
Version 1.. Initial release had working recovery but didn't have full root so had to flash the SuperSu update zip
Version 2.. Added/fixed full root added extra release to include SDCard fix for members who want it
Version 3.. Updated recovery to 2.7.123
Credits..
Me for the rom direct from emma
@DooMLoRD for rooting 4.2
@Androxyde
@Chainfire For his amazing SuperSu app (used it personally since first release + pro this is not an attack from other superuser apps this is personal choice also having superuser Elite)
@[NUT] For his great guide HERE (Done a few now which wouldn't have been possible without him)
All the other Devs here & Sony of course
nice work, the link for Stipped FTF is not working, keep getting server error.
edit: im sure it didnt say mirrior ha got it now.
Sorry it probably didn't say mirror at the time I am still uploading
Enjoy
zippy01 said:
Sorry it probably didn't say mirror at the time I am still uploading
Enjoy
Click to expand...
Click to collapse
Do you know if this would work on the tmobile version?
Hmm sorry seems that recovery is working but root is not
Have added a temporary fix untill I sort out the flashable zip
aooga said:
Do you know if this would work on the tmobile version?
Click to expand...
Click to collapse
Don't see why not
Hello there!
I tried to flash this one after latest 4.3 10.4.1.B.0.101
After flashed rom through Philz recovery and flashed Stripped .ftf file i can't get into boot nor to recovery.
I see sony logo but after that backlights just stay on and nothing happens.
you messed up, flash stock 4.2.2, root and try again
vkass said:
you messed up, flash stock 4.2.2, root and try again
Click to expand...
Click to collapse
I must quote and thank you for this solution!
Have to go all the way again... I never get Sony again!
So we gotta be on 4.2.2 to flash this?
Enviado desde mi C6603 mediante Tapatalk
Thanks
Worked fine on my LB XZ with 4.3
zippy01 said:
Don't see why not
Click to expand...
Click to collapse
Thanks, but I looked into it more. Since the tmobile version has a locked bootloader, I don't think we can flash this.
aooga said:
Thanks, but I looked into it more. Since the tmobile version has a locked bootloader, I don't think we can flash this.
Click to expand...
Click to collapse
You can flash this on a Locked Bootloader did it also on my Hutchison Drei Austria LTE Version works fine.
You just need Root and a Custom Recovery thats pretty much all.
Just follow the instructions one the frist page
That's very fast work! Much thanks! Let me have a try!
Can I use this on rooted 4.2.2? Thanks.
xhuy said:
Can I use this on rooted 4.2.2? Thanks.
Click to expand...
Click to collapse
Yes U Can.
Copy Rom and SuperSU Fix ZIP To Ur Mobile
Go To Recovery
Wipe Cache and Dalvik Cache
Wipe Data Factory Reset ( If Needed )
Flash ROM
Flash SuperSU FIX ZIP
Switch Of Ur Mobile
Flash Stripped FTF via Flashtool
Reboot
I flash this rom, and i can't see stock Message of sony @@
Help me fix it, or send me stock message
p/s: sorry for my bad english!
I must wipe all, flash this rom again and everything okay
thank you for rom
Quick question, and kinda noobish, this is generic unbranded right? I mean i can use this no matter where on Earth i am?
just to be sure HAHA :laugh::laugh::laugh::laugh:
shaanyt said:
Quick question, and kinda noobish, this is generic unbranded right? I mean i can use this no matter where on Earth i am?
just to be sure HAHA :laugh::laugh::laugh::laugh:
Click to expand...
Click to collapse
Yes . U Can :victory:
fedevd said:
So we gotta be on 4.2.2 to flash this?
Enviado desde mi C6603 mediante Tapatalk
Click to expand...
Click to collapse
Nope can be on 4.1.2 aswell
Sent from my C6603 using Tapatalk
Hello guys, on this site there are different ROM with Lollipop for our N7000
http://roms.blog.163.com/blog/#m=0&...085067084080080095086086087075081085087065082
I'm testing the Carbon 5.1.1 Beta4.0 it seems to work well
http://www.mediafire.com/download/pnzpsn3cc6za266/CARBON-LP-5.1.1-Beta4.0-n7000.zip
If someone wants to try
Make a backup of your ROM
wipe data factory reset
wipe cache
wipe ART
format system
format cache
format data
flash rom: http://pan.baidu.com/s/18Z0C2
flash gapps: https://www.androidfilehost.com/?fid=24052804347794655
flash kernel bauner: https://www.androidfilehost.com/?fid=24052804347785738
I recommend to flashing kernel Bauner otherwise you end up with the stock recovery CM
There are 4 or 5 Chinese app but you can uninstall without problems
Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-N7000 using Tapatalk
Whoa, Carbon 5.1 has come to the Note!? By the way, it looks like the kernel was from bauner. Did you flash it yourself or was it in the rom originally?
AutumQueen92 said:
Whoa, Carbon 5.1 has come to the Note!? By the way, it looks like the kernel was from bauner. Did you flash it yourself or was it in the rom originally?
Click to expand...
Click to collapse
No the original ROM has a different kernel with recovery stock CM. I recommend using the kernel bauner because the recovery CM has few functions
Inviato dal mio H60-L02 utilizzando Tapatalk
Please, upload the rom to some other source because I don't want to register to this shady site... And NO you can't download it without registering.
In the first post added link MediaFire
Sent from my H60-L02 using Tapatalk
Dear all,
I can't get a GPS fix. Anyone else facing this issue?
Kind regards
BlissPop
panamera2011 said:
In the first post added link MediaFire
Sent from my H60-L02 using Tapatalk
Click to expand...
Click to collapse
You can add BlissPop for N7000?
Teo57 said:
You can add BlissPop for N7000?
Click to expand...
Click to collapse
BlissPop I can upload it to MediaFire, but I am currently using MIUI 7 that I really like. You want to test yourself?
Sent from my H60-L02 using Tapatalk
panamera2011 said:
BlissPop I can upload it to MediaFire, but I am currently using MIUI 7 that I really like. You want to test yourself?
Sent from my H60-L02 using Tapatalk
Click to expand...
Click to collapse
We have already tested BlissPop and is the most complete and fast forward version 3.95 will come soon ... I think these days. Now is the v3.75 with BlissPop We have already tested and is the most complete and fast forward version 3.95 will come soon. Now with kernel v3.75 are Bauner :good:
Hello ,
thank you for sharing , I desuite flash .
Teo57 said:
We have already tested BlissPop and is the most complete and fast forward version 3.95 will come soon ... I think these days. Now is the v3.75 with BlissPop We have already tested and is the most complete and fast forward version 3.95 will come soon. Now with kernel v3.75 are Bauner :good:
Click to expand...
Click to collapse
Could you please share mirror link something like Mediafire, androidfile host etc.
Thanks
mjrifath said:
Could you please share mirror link something like Mediafire, androidfile host etc.
Thanks
Click to expand...
Click to collapse
Ok, but it takes a bit to load that must load both versions v3.52 and v3.75.
https://mega.nz/#!DNVGBahb!G45y0_k7yQJZt9zGpC24UBAi_OP_0kNvXa4aTVkNYv8
First install v.3.52 and set the device then do update v3.75
Teo57 said:
Ok, but it takes a bit to load that must load both versions v3.52 and v3.75.
https://mega.nz/#!DNVGBahb!G45y0_k7yQJZt9zGpC24UBAi_OP_0kNvXa4aTVkNYv8
https://mega.nz/#!aE8xhRSR!SirEvmCTCB6eXcc-afFW2xkYMjfeCLfveGlw6nhtMn4
First install v.3.52 and set the device then do update v3.75
Click to expand...
Click to collapse
Hi mate,
Thanks for the link,
I am unable to flash v3.75 after wipe everything.
I tried with raw kernel, bauner kernel for lollipop rom.
Then i tried Remix Rom.
Fianlly I installed v3.52 booted the device and did the necessary setting. reboot to recovery and tried to flash 3.75, but it says status 7 error.
Please elobarate the step by step.
mjrifath said:
Hi mate,
Thanks for the link,
I am unable to flash v3.75 after wipe everything.
I tried with raw kernel, bauner kernel for lollipop rom.
Then i tried Remix Rom.
Fianlly I installed v3.52 booted the device and did the necessary setting. reboot to recovery and tried to flash 3.75, but it says status 7 error.
Please elobarate the step by step.
Click to expand...
Click to collapse
-installed v3.52 with gaaps and kernel posted this link panamera2011 and make settings
-restart in recovery without deleting anything and blinked again and v3.75 and kernel
If it's not good v.3.75 download it again and climb but it takes about 1 hour
https://mega.nz/#!LElDkYLZ!apOwhtTWsFx0KUweACx0QZ1tN2ly-gD4qiTpPIUE7JU
Sorry buddy was my mistake, try now with new climbed today and certainly go v3.75
Teo57 said:
-installed v3.52 with gaaps and kernel posted this link panamera2011 and make settings
-restart in recovery without deleting anything and blinked again and v3.75 and kernel
If it's not good v.3.75 download it again and climb but it takes about 1 hour
https://mega.nz/#!LElDkYLZ!apOwhtTWsFx0KUweACx0QZ1tN2ly-gD4qiTpPIUE7JU
Sorry buddy was my mistake, try now with new climbed today and certainly go v3.75
Click to expand...
Click to collapse
Thanks for the new link,
Downloading progress. Will flash and update here.
Thanks again.
mjrifath said:
Thanks for the new link,
Downloading progress. Will flash and update here.
Thanks again.
Click to expand...
Click to collapse
After installing the recommended minimum to make a backup and use as carefully what themes can give bootloop.
I changed some themes and I can climb them, ok?
https://mega.nz/#F!7I8TDBqD!aWIZ6F21w5SDS9vwf3LrZg
Teo57 said:
-installed v3.52 with gaaps and kernel posted this link panamera2011 and make settings
-restart in recovery without deleting anything and blinked again and v3.75 and kernel
If it's not good v.3.75 download it again and climb but it takes about 1 hour
https://mega.nz/#!LElDkYLZ!apOwhtTWsFx0KUweACx0QZ1tN2ly-gD4qiTpPIUE7JU
Sorry buddy was my mistake, try now with new climbed today and certainly go v3.75
Click to expand...
Click to collapse
I wiped everything flash the v.3.75 from new link above.
But stuck in Blisspop logo nothing happend. (Bootloop)
Is it necessary to flash 3.52 + Gapps and setting up prior to update or any other fixes.
mjrifath said:
I wiped everything flash the v.3.75 from new link above.
But stuck in Blisspop logo nothing happend. (Bootloop)
Is it necessary to flash 3.52 + Gapps and setting up prior to update or any other fixes.
Click to expand...
Click to collapse
Yes as I said before installing v3.52, not directly V3.75, because the first bootloop.
Over v3.52 without deleting anything install v3.75 and again kernel
Teo57 said:
Yes as I said before installing v3.52, not directly V3.75, because the first bootloop.
Over v3.52 without deleting anything install v3.75 and again kernel
Click to expand...
Click to collapse
So nice of you.
Many thanks for the reply.
I will try and update here in a while.
Just to ensure can be installed any apps/mods or xposed after flashing 3.75.
Which rom you are using currently...