Hello i have a Omnia pro b7610 and i skip the calibration loop for start but my calibration is fail
I need a good number of calibration data or an other idea to fix my problem!
i can't get in Start
Related
Hi boyz!
I have a problem friends. My Trinity is broken by the surface of the touch, but it display the screen itself is not reached. The problem is that: I have performed a Hard reset and I'm stuck at the calibration of the screen as it is broken! Please if there is a way to pass the stage of calibration, please tell me because i'm lost! Thank you in advance
Try msp remote alignment
With this program you can preform or bypass the alignment from your pc
http://www.codefactory.es/en/downloads.asp?id=43
(the program is halfway the page)
Arjan
WaveMaster1406 said:
Hi boyz!
I have a problem friends. My Trinity is broken by the surface of the touch, but it display the screen itself is not reached. The problem is that: I have performed a Hard reset and I'm stuck at the calibration of the screen as it is broken! Please if there is a way to pass the stage of calibration, please tell me because i'm lost! Thank you in advance
Click to expand...
Click to collapse
hello wavemaster,i suggest to get your touch screen replaced asap & calibrate your screen when it's been replaced,because i'm sure it'll be impossible 4u still to calibrate it.and even if you passed the calibration,you will find it hard to use your device because the touch has lost its precision,it'll be same as useless.believe me coz i've been there.ΓΌ
Hi everyone,
i have a problem with the compass. Every time i start the programm "digital compass", the calibration screen that shows the "8" is only about half a secound visible, than the Programm shows "5812N", every time i start it.
Its possible to to force a calibration ?
Or another tool to read the data from the compass ?
Thank you...
Has nobody a hint for me ?
I only get this problem if i haven't used it for a while or something electrical is near. Other than that no suggestions from me
Guys,
I own an HTC Touch 3G.The Touch Screen suddenly stoped working.I tried Hard Reset,then it went into the Known loop of Align Screen.I somehow managed by skipping the Align Screen using the Remote Screen Alignment Tool.
But to make my Touch Screen to work, I need the Calibration Data File which by using Remote Screen Alignment Tool i can put the alignment for my Phone (Hopefully,Not Sure)
Any Tips & Suggestions are always welcome !!!
Plz help me to save my phone ...
Thanks,
Bala
t3232 help!
i have bought a htc clone t3232.i have problem with the touchscreen,works complete wrong!i have done soft/hard reset but i cannot resolve the problem.
i cannot enter to my phone because i cannot enter my password!
i have tried many times to calibrate the screen but every time the problem remains!please help i have the phone 2 days!
Guys,
Anybody can create the calibration file using Remote Screen Alignment Tool & provide me...
It will make my Touch screen to work...
Thanks,
Bala
ulvergr said:
i have bought a htc clone t3232.i have problem with the touchscreen,works complete wrong!i have done soft/hard reset but i cannot resolve the problem.
i cannot enter to my phone because i cannot enter my password!
i have tried many times to calibrate the screen but every time the problem remains!please help i have the phone 2 days!
Click to expand...
Click to collapse
I got problems with the touch screen also, when i press something on the screen it highlights above or below my selection, writing SMS was nightmare.So i went to htc service and they replace the "touch digitizer" and now my problems are history, everything works like charm.I think you should try that.
now i used ipaq 612c, and now i need calibration data for my ipaq. anyone can help me?
i'm sorry my english is so bad
u mean, callibrate your screen? just go to the screen menu...
muchan said:
u mean, callibrate your screen? just go to the screen menu...
Click to expand...
Click to collapse
that's not what I meant. align the screen on my PDA is not working properly. so now I just use the keypad on my iPAQ. screen align process always fails. therefore I use remote applications align screen. and what I need now is the correct calibration data from the iPAQ 612 that are still functioning normally. calibration data in the form of the composition of the coordinates that are stored in a *. dat fil
Hi,
i have HTC Jade 10 (t3232) with me from last three weeks i am having some touch screen (Calibration) issues, like it is not pointing out exactly when i try to calibrate
so i did hard reset, after that on first startup , it was going on and on looping on screen alignment screen, somehow i manage to skip or bypass that screen by using Remote Alignment Screen tool
i also tried and install new ROM by doing HardSPL and now screen alignment works fine on first boot
but after using my phone 5 to 10 minutes my cell phone calibration got out or changes its coordinates in registry, than i search for the calibration data of HTC JADE 100 and manually enter it in phone's registry
( Can anyone post the exact and correct values or data of Calibration for HTC JADE 100 (t3232), may be it will work. )
after inserting calibration values that i took from forum in the registry, it works fine on middle portion of phone except top and bottom portion, and this thing is going on and on
after that i research on XDA forums about this issue and came to know that i might have an issue with my screen digitizer, if i change my screen digitizer it might work again
but i am not sure whether it is a digitizer issue, touch screen issue or any software issue or what, i am very upset from last 3 weeks , any one can tell me after reading the above mentioned problems that what happened to my phone and what should i do,
your help is appreciated.
Thanks.
I have the same problem, I need the touch calibration data to insert the cell regedit
Any body please???? I have the same problem aloso
looking for this too!
OOOOOH Yeaaaaah, I found the HTC Touch 3G (Jade) CalibrationData = "520,387 201,800 208,141 832,146 826,788"
Is ur problem fixed after inserting these values.
Sent from my HTC Desire using XDA App
Touch 3g caliberation details.
salmansaeed said:
Hi,
i have HTC Jade 10 (t3232) with me from last three weeks i am having some touch screen (Calibration) issues, like it is not pointing out exactly when i try to calibrate
so i did hard reset, after that on first startup , it was going on and on looping on screen alignment screen, somehow i manage to skip or bypass that screen by using Remote Alignment Screen tool
i also tried and install new ROM by doing HardSPL and now screen alignment works fine on first boot
but after using my phone 5 to 10 minutes my cell phone calibration got out or changes its coordinates in registry, than i search for the calibration data of HTC JADE 100 and manually enter it in phone's registry
( Can anyone post the exact and correct values or data of Calibration for HTC JADE 100 (t3232), may be it will work. )
after inserting calibration values that i took from forum in the registry, it works fine on middle portion of phone except top and bottom portion, and this thing is going on and on
after that i research on XDA forums about this issue and came to know that i might have an issue with my screen digitizer, if i change my screen digitizer it might work again
but i am not sure whether it is a digitizer issue, touch screen issue or any software issue or what, i am very upset from last 3 weeks , any one can tell me after reading the above mentioned problems that what happened to my phone and what should i do,
your help is appreciated.
Thanks.
Click to expand...
Click to collapse
Calibration Coordinates for Touch 3g T3232
527,519 209,847 219,159 831,188 839,848
To bypass screen alignment create Welcome.not file at the root of SD card,