Hi to all,
I have an I8000 when I turn it on I face with touch calibrating page and when I try to calibrate it is not calibrating I've changed many touch but they all are the same.
lcd digitizer problem
that's problem with your hardware/lcd digitizer,you have to replace it to service center..
Related
Hi, I have screen alignment problem with my HTC TyTN. I've tried many things to fix this issue. I thing, that my problem is when TyTN is warm. I have question. If I buy and replace new LCD display with digitizer will it help ? Or I have to replace something else ?
Thank you for any advice
Hello,
I have one Htc Trinity, and touchscreen doesnt work, so i bought one lcd screen and touchscreen for my device (new).
After the replacement my display is white, so to test what could be i change with the old one and it gave me normal image. what could be this error?
Its unsual that the new lcd is faulty no? How can i fix this?
Please help me
Many regards
Kusta
I have MDA VARIO II. Once i faced a problem of screen alignment. I use my Keyboard(not on screen keyboard) a lot for chating and messaging. Someone told me to install new LCD becuase it is problem of LCD. I buy a new LCD from market to install. After installation, problem is still there. Pointer always hit to top right even i tagged bottom area. I did not understand the problem exactly. If it was a problem of LCD then it must be solved after new LCD but still there. Can some one tell me it is the problem of CASING or flex cable or something else.
yeah, it the same problem with me.
I have changed the touchscreen but it still same.
anyone can help?
-------------
sorry for my poor english
Hello to all my guys HD2 after some months of inactivity, yesterday I turned back and I found the surprise ugliest in the world, the touch does not go, can you tell me what can I do? to make it work again?
EDIT: if I hold the touch screen floor of 1 inch from the shell of the phone the touch and that it works beautifully.
EDIT 2: I tried it with the tester, and if I measure the frequency of current flowing from the motherboard to the screen with DCV 200 and 0.29 so it's not a motherboard problem (or rather, it seems to me that it is not)
check digitizer connections & lcd ribbon to mainboard & if all look ok & reseating them makes no difference to digitizer function then expect new digitizer is needed.
Not expensive & also very very common for digitizer fault on HD2 ...
Hello XDA people,
The touch screen from a S4 from a friend of mine is not working. It suddenly stopt working and they tried to reboot it to see if that would help. But it didn't. The screen is not broken or anything like that. It suddenly stopt working.
I've got a S4 as well so i fitted the motherboard of my friends S4 in mine and the touch works. But when i've placed my motherboard in my friends S4 to see i've that worked but the touch screen didn't work with my motherboard in it.
Do you people of XDA maybe have a solution?
Greetings Kyrindia