Database Users

Terminal service client FULL SCREEN ??

The new support of better resolution in Terminal client is great! but why not in full screen?? it would be nice working in full screen mode VGA. the bars on top and bottom of the screen are stealing to much space. any ideas?
maybe just a registry key?
or any similar applications which are supporting full screen, but faster than citrix and VNC?
thx

Um, Terminal Services *IS* Citrix, M$ bought the code to it years ago...
I've just installed the ICA client on my Universal, will try it sometime

ICA client works perfectly on my device...Takes up more space than I'd ideally like, but it's flawless.

sl9: oh, didn´t know that. thanks for the explanation.
sub69: well i also have the ICA client installed. But my problem is that i have a hosted exchange-box with MS Office, but where i can log in only from the ASP´s-Website, which again is not supported by pocket internet explorer....
is ICA working in full screen?
but in any case i can´t understand why MS didn´t implement that function. am i wrong or did the last version in wm2003se work in full screen?

Hmmm,
I'm trying to set this up, but it doesn't seem to work out... COuld some provide me a step-by-step tutorial ? I'm working with Windows XP and WM2005.
Thanx !
Sammy ;o)

Hmmm, I login to my work network using an IE portal which (after a few passwords etc) automatically loads my ICA Client and off I go. Exchange boxes and ASP's that don't support IE are beyond me, I'm afraid.
No full screen options anywhere, ever. Not in ICA or Terminal Services Client (as far as I can remember)...

www.logmein.com It's free and nice and it works with firewalls, etc....and of course, full screen

Post some screenshots.
I made an app that will make most apps fullscreen, but show me a shot and I'll see if it's suitable.
I'm on QVGA WM200SE tho...
V

vijay555: That sounds nice! as soon as i have some spare time i will post sone screenshots. thnx!
dherrero: Hey, great hint! this tool is working perfect! very fast and the resolution settings are incredible!

I had a problem accessing the ICA config UI localy on my universal. IE seems to have an issue with the loopback address? I can access the config UI remotley but not locally! Has anyone else experince this? I may try reinstalling after a hard reset to see if it's something else screwing up the TCP stack...
Also, I doubt you'll find anything that makes beter use of bandwidth than the ICA protocol (and conversly, anything that makes worse use of it than VNC! :wink: )
wrt ICA v RDP - ICA is based on similar stuff to RDP but is significatly more advanced, allowing multiple virtual channels to be incoporated into one ICA channel, allowing things like drive mapping, client printing etc. True, M$ bought ICa technology from Citrix (and Citrix are, in fact M$'s biggest partner!) but I belive developemnt of ICA leads developemtn of RDP quiet significantly.
I manage a farm of about 30 metaframe servers here at work so getting a working ICA client on my universal would be handy! I've had it working fine on other WM5 devices and WM2003SE devices previosuly.
ICA fullscreen is cool and I've had it working previously. There's a config option in the UI somewhere. Lurverly! Is usless on CE devices without a keybopard though as you can't get the SIp up without the taskbar being visible!

tintoy - look in the developers forum for my program SipSwitch, for toggling the sip from a shortcut (ie Hardware button!). That way, hide the UI but use a spare hardware button to bring up the SIP.
Never tried it on WM2005, but it should work.
V

Sounds excatlty like what i was looking for when i tried full screen icaon my himilaya! I'll seek it out.

tintoy - let me know how SIPswitch goes.
Re terminal services; I've had a quick play on WM2003 and I can do something with it, but I don't run terminal services on my desktop (how can I test it - run remote desktop?) so haven't tested the actual client screen yet.
But, as I said, post a screenshot and I'll have a think about it.
Right now my WM2005 emulator is playing up, so a little delay...
V

i found this today
http://msdn.microsoft.com/library/d...enduser5/html/wce50conRDPRegistrySettings.asp
BitmapCacheSize : REG_DWORD Default is 1500. This value is the size, in KB, of the bitmap cache in memory. The maximum value is 32000.
BitmapPersistCacheSize : REG_DWORD Default is 10. This value is the size, in KB, of the bitmap cache file.
0x5DC(1500) and 0xA(10) respectivly,, im using on these now, i noticed that the defaults on JJ was v low in comparison so i upped them and it has got rif of the black boxes and real slow refresh
however
i added this key
HKEY_LOCAL_MACHINE\Software\Microsoft\Terminal Server Client
add FullScreenAlways : REG_DWORD added value 1
dosent make it full screen, the way were after, it refers to the terminal session size being forced to 640x376 256 colours, rather than having a 1024x768 session that you have scroll bars on to pan around..

Carnivor didn't mention it, but those parameters are found here...
HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client
On my Jasjar they were also way low... 10 and 1 instead of the 'minimun' on 1500 and 10. I changed them, but haven't tried it yet hopefully it'll help
Brett

Don't know if it is relevant to ths subject, but would like to share. I use GoToMyPC. It is not free, but it supports full screen (as always) and many different zooming options. Very usable on JJ.
Also, it works through firewalls and dynamic IP address. All the networking complexity is handled by GoToMyPC.

Carnivor said:
i found this today
http://msdn.microsoft.com/library/d...enduser5/html/wce50conRDPRegistrySettings.asp
Click to expand...
Click to collapse
I don't think that those settings are ment for the Pocket PC. They look for me like settings for embedded CE.
I have another interesting problem:
I have to open in a terminal session another session, because the other server is'nt exposed to the internet.
In the second "session" the "Shift" key is ignored. That's bad for typing a case sensitive password... :?
The CAPs key works fine.
Strange, isn't is?

dherrero said:
www.logmein.com It's free and nice and it works with firewalls, etc....and of course, full screen
Click to expand...
Click to collapse
Can you please point out the free version ?, I can only find a trial version

it dosent clearly state that its WM5 but the keys definatly make a big improvement of display glitches. those black boxes i had everywhere are long gone.

Logmein is fab. Free, fullscreen and just works.
I've found a good VNC client that works full screen: http://dotnetvnc.sourceforge.net/
Works like a charm if a little slow.

[ ]Video Security - Can i be a remote spy???

so i have been thinking about my homes security and i have some questions...
i have collected quite a few expensive gadgets and they need protection!
So, i have been tinkering with my **** logitech orb web cam and it now supports motion detection. now call me crazy but i would like to be able to receive on my diamond, the video that has been recorded by a motion detection enabled web cam set up in my home. i'm trying to get my logitech web cam to save on my HP media smart server, running windows home server, not default on my laptop, and be notified by either sms that there is new video on my server or the video itself sent to my diamond. i would also like to be able to connect remotely to my laptop and be able to activate the camera software from a desktop link or something like that.
now i swear this is diamond related in the fact that i would like to use the device as a controller.
i have not used remote desktop on my diamond yet, i could not get it working.
i'm not sure if this is a app request, idea, or util so ill follow the forum template rules once this thread takes shape.
please shed some light on how one could make this happen. i think it could be useful to all of us, at home or place of business or your just want to bust your stupid parents snooping around your room.

so you are looking for an app that does the following:
act as webcam streaming server, but only when motion is detected, and when it does detect motion, it must notify you via sms, plus: you need a simple app for youre diamond to vie the stream..
i dont think I would be able to do this, but if you can clarify exacly what you want thinking WITH you is more easy...
on the other hand, i am sure the pc part has already some usefull apliactions wich are able to act as a server. but im not sure about the notification sms..
it would be ideal if that sms contained a link that you follow to open youre browser to view the stream...
what i know what is possible, there are apps for the pc that record video and send it via e-mail...
just use google for webcam security..
maybe there are pplz around here that can adapt software for u...
but i u seach im sure there are apps out there wich can do that... the only app you need is a browser capable of viewing video streams..

Would be good an app who detect movement, and then make several actions:
- Upload a photo/video on an FTP
- Save photo/video
- Play an AUDIO alarm
- Send an mms with the photo/video
- Send a warning sms
- Make a call (and let you listen what's happening)
....all when Movement is detected via the pda camera

Improvise
What you are trying to accomplish is mostly already possible. You'll need to do some research and some creative thinking to get it to work though. You will most likely not get an all-in-one solution to this issue.
It sounds to me like the motion detection and subsequent video capture is already taking place via the software you have installed for your web cam.
Basically you need two things: A way to be notified of a new video file and a way to view it.
I'm not aware of any existing application which will send an email (which can arrive as an SMS) based on a new file being created in a directory, but as a programmer I can asure you there's not much to it.
There are however many solutions which would allow you to view a video file on your WM device from you computer at home and remote desktop is not the way to go here. Your best bet is probably good old http since most video applications will handle "streaming" to file to you as you watch. You'll need to familiarize yourself with IIS (Internet Information Server; I'm assuming you're using Windows) and create a "virtual directory" pointing at the folder where the video files arrive. You'll also need to take the necessary steps to open port 80 so that your computer at home can host via http (this means configuring your router and your computer's firewall). Once this is done just pick your favorite video player and choose "open URL" or something similar and type in http://YourExternalIP/YourVirtualDirectory/YourVideoFile.
I'll leave it up to you to figure out how to best make yourself aware of new files.

As LucidObscurity says there already are several solutions available to this through the combination of existing discrete applications, although .
My setup does does what you desire although goes quite a bit further so it may be overkill for your requirements. However, as food for thought it may still be of interest. It consists of:
- A series of Panasonic BL-C1 IP cameras distributed around my house (running on the wired house network, although wireless versions are available) - these are quite discrete cameras and don't have the typical 'camera look' hence are aesthetically compatible with partners, guests etc (most people I've pointed them out to hadn't noticed them and then didn't believe they were cameras)
- The motion detection/analysis software ZoneMinder - the 'brains' - this monitors the cameras, detects motion (in zoned areas) and records the events as required (it buffers the images so you can capture what happened before the trigger too)
- The SMS tool MercurySMS (and VGSMail gateway) used to alert me via text when motion has been detected (the texts contain various event-related details/stats and a link to the recording)
- A handful of other scripts used for small housekeeping tasks e.g. scheduling the starting/stopping of the system, realtime offsite backup of recorded material (there's no point me capturing a thief on video if he then goes an nicks my PC!), etc
- My Diamond, or any other device with a web browser, used to interface with the system - controlling/configuring it, accessing live/recorded video etc. A web front end is essential in my opinion - you don't want to tie access down to a single platform/device.
Whilst it's not a setup that is up-and-running out of the box now that's it's fully configured it works well - very well. False alarms are practically nill and it doesn't miss a thing. Remote access via the web is powerful and as simple/complicated as you want - on holiday my girlfriend regularly fires up the quick 'snapshot' montage to keep an eye on our cats (we do have a dedicated 'catcam' monitoring the catflap so we can see the history of who came in/out and when).
I'm sure there are some all-in-one solutions available but they likely come at a cost and perhaps do not have the power and flexibility of a modularised solution - it'd be worth seeing what's available though.
Mathew

thanks for all your replies. great read.
i just want all my systems, Windows Home Server, Vista Home Pro and WM6.1 to come together. i will take a look into the apps you have linked to and see whats what.
i already have the ability to record with motion detection. when a new file is created in a folder on my home server, i want to be notified and linked to or streamed. i have remote access to my file via browser [ blazeitup123.homeserver.com ]. i can't get the logitech software to actually save to the server because it says i dont have the rights. i'll try and fix that tonight after dinner, but saving to the server is very improtant because my laptop could be stolen and then the whole setup was pointless. i want to incorperate my diamond into this process as much as possible, like with the remote activation and so on.

Wooow this is one of the coolest threads I read in a long time.
Although I'm not as advanced as some of the members regarding computing, I was thinking:
-Cam software streaming to remote address.
-When motion is detected, cam starts recording, thus creating movement in the remote address.
-When new connection(movement) is detected, you activate a new RSS feed.
-You get RSS notification on phone.
-Connect to remote address and check the stream.
What about:
A spy cam on the Diamond, I mean that you could hide your phone somewhere and point it at a certain spot you want to view. Then remotely access the phone and view the live stream?
Since the phone is so small its an easy hide.
Greetings to all and luck in all your great projects!

you should actually look here...
http://www.incax.com/

Looks good. I've also found Wapcam
(Seems to alert via e-mail to you could use either push e-mail or an email-to-SMS gateway for instant alerts)
Mathew

shogunmark said:
you should actually look here...
http://www.incax.com/
Click to expand...
Click to collapse
looks like great software. ill try the trail and it only 20 dollars to buy . seems very simple to. i want something more server based because my laptop would be the first thing out the door.

Security
Blazeitup123 said:
looks like great software. ill try the trail and it only 20 dollars to buy . seems very simple to. i want something more server based because my laptop would be the first thing out the door.
Click to expand...
Click to collapse
Perhaps you should invest in a big dog.

I m using this one:
http://www.accordiva.com/
U have there SecuRanger 2 Support 4 video channels
or one Camera only: SecuExpress 2
SecuExpress 2
both come with WM application for remote / viewing etc..

Take a look at orb.com. It has the ability to sms or email you if it detects movement. You could then connect to your home webcam through the phone's' browser.

...a good spy, like a 007 , should be able to SPY also without his PC
The only one that i've found is Invisible Shooter... for symbian os there are a lot of those apps (no pc needed), but for the pda there aren't many... (see the post #3)

[App]TrackPad

Hello all!
Well... to start off with... this is one of my very first apps, so go easy on me. I'm sort of a "junior developer," you see (at least I strive to be). I would also like to mention: this is NOT complete (yet!). It is NOT ready for use, I only posted it because I would like to get some feedback.
TrackPad by x.v_
This connects to the Java server app running on your computer over WiFi (meaning both your phone and computer have to be on the same network, sorta)! Then it sends a long series of points, based on how you move your finger, telling the computer to move the mouse. Thus, working like a trackpad of a laptop.
What this will do:
->allows control of the mouse
->allows you to click
->keyboard functionality (potentially, haven't decided tbh)
->completely multiplatform (server is in Java, which Win, Linux, and Mac have)
What it currently does:
->allows control of the mouse
->completely multiplatform (server is in Java, which Win, Linux, and Mac have)
Change log:
->v0.1 - First release (developmental preview )
Download src.tar.gz

[Q] [NEW DEV] - Screen Extension

Dear wizards of the coding.
Everytime I see my new devices I must say every purchase action depends on how much is supported in XDA-DEVELOPERS, so keep doing it.
Not sure if this is the right category to post this but as an advance user (not developer) I was thinking that could be interesting to develop an application to extend your current screen with Galaxy tab screen.
As I'm not an expert, I'm not sure if current USB bandwith will support it, but I ask to the experts to check if they see will benefit the community.
Another topic I've experienced is about bluetooth. I use to use a bluetooth earphone Sony Ericsson MW600 with OLED display. There are some devices where I can see son title or call ID name from my mobile phone. That doesn't happen with my SGT.
Sorry for the extended email and look forward to seeing these developments or threads.
Regards to all!!!

rclua said:
Not sure if this is the right category to post this but as an advance user (not developer) I was thinking that could be interesting to develop an application to extend your current screen with Galaxy tab screen.
Click to expand...
Click to collapse
Not quite sure exactly what you mean, but if you mean using your Tab's screen as a second (or third) monitor for your desktop machine, you could do that right now on Macs - run ScreenRecycler on your desktop, a VNC client on your Tab and job done. The virtual second monitor of ScreenRecycler is shown in the VNC client on your tab.
I don't do Windows but a quick Google seems to suggest ZoneScreen does something similar.

The promlem with vnc is its slow. It moght be possible to do it over usb since it is way faster than bluetooth
Sent from my GT-P1000 using XDA App

Loccy said:
Not quite sure exactly what you mean, but if you mean using your Tab's screen as a second (or third) monitor for your desktop machine, you could do that right now on Macs - run ScreenRecycler on your desktop, a VNC client on your Tab and job done. The virtual second monitor of ScreenRecycler is shown in the VNC client on your tab.
I don't do Windows but a quick Google seems to suggest ZoneScreen does something similar.
Click to expand...
Click to collapse
Your solution is fine but I don't think VNC will be as fast. I was thinking on same way windows/mac/linux extend their screens using dedicated video ports/hardware but in that case using all potential USB bandwith for transferring such data.
It could have applications of monitor in the music industry (Imagin a DJ o composer controlling from SGT and playing other stuff on main screen), things like that.
Any hint on the second topic? (bluetooth realted to songs titles or call ID names being transferred from your SGT or Android Device?
Thanks!!

There is an application in the market called androidmonitor that allowsa phone to be used either as an extra monitor or as a keyboard input. It's $9.95 and the review so far are not good plus one notes that it does not work with the galaxy tab. With 15 minute return policy, reviews need to get better to try it.
randy

[Q] use N10 as a secondary monitor

Does anyone know how to the N10 as a secondary monitor?
(1) I want to edit documents on my laptop and view the output on N10
(2) I do NOT need an extended desktop (i.e. no need to drag objects back and forth between the two screens)
(3) My laptop runs on ubuntu 12.04, so I can't use https://play.google.com/store/apps/details?id=com.idisplay.virtualscreen&feature=search_result
(4) A little google turns up suggestions that involve running a vnc viewer for android and setting up a vnc server on the laptop, but I can't find any details on how to do this.
Your help and suggestions are most welcome!

case-sensitive said:
Does anyone know how to the N10 as a secondary monitor?
(1) I want to edit documents on my laptop and view the output on N10
(2) I do NOT need an extended desktop (i.e. no need to drag objects back and forth between the two screens)
(3) My laptop runs on ubuntu 12.04, so I can't use https://play.google.com/store/apps/details?id=com.idisplay.virtualscreen&feature=search_result
(4) A little google turns up suggestions that involve running a vnc viewer for android and setting up a vnc server on the laptop, but I can't find any details on how to do this.
Your help and suggestions are most welcome!
Click to expand...
Click to collapse
I think you could use Xdmx on your Ubuntu and install X Server on your tablet.
There are a few other X servers for Android on the playstore but the others were either pay or had bad reviews. Try thus first and then if you need a better X Swrver, look around.