Hi All !,
I have problem with my camera (back), I flashed my I8000 with WM6.1 and after that I tried to run camera but it ask me to update camera firmware first, so I do that, typed *#2470# and run update, then I reset phone.
After reset, camera stops working, after run it show message that "Sensor is disconnected" and close app. On some ROMs nothings shows and close.
I update ROM to the lastest org. version and try update camera fw. but app tells me "Don't need to FW update~!" and also:
Code:
ISP FW[71,03] PRA[71,1A] AF[NONE]
BIN FW[71,03] PRA[71,1A] AF[NONE]
On oldest ROMs it show some value instead "NONE", and make update but nothings change. Any idea ?
Is that problem occurs only on WM6.1 ROM(s)? Which exact version have You used?
Related
can anyone here provide me with any help on this i m not able to start the camera and camcorder application when i press on the icon it doesnt open anything....when i look into windows folder i can see the application but it doesnt open ...
i tried many roms and did hard reset changed the radio but still doesnt work ...
can anyone tell me is it a hardware problem or anything else...pls
Stupid question as you mention trying different roms but is your battery below 20%?
Sounds like a hardware issue to me.
everything is fine battery ,memory card...wen i install nadavi camera fix it tells me unable to start camera...as soon as i uninstall it it doesnt notifies me with any msg...
Isn't nadavi for different devices? Maybe it is incompatible with the camera in the hd2? Did you check?
happens to me occasionally.
soft reset always fixes! ... till next time!
my mind is ****ed guys pls help me out...
do a hard reset, dont instal anything. check camera. instal something, hceck camera, instal, check, once you find out what it is, dont do it again.
Sometimes when I want to take a picture, I was unable to start my camera app, instead a error message pops up like the one shown. Why is this? How can I fix it?
Close opera if it is running in the background and then try using the camera
I have close all the programs, same error message pop up.
Rom?
Radio?
So if you dont find any solution I think its better reflash the HD2.
it usually happens when using some coocked roms , try to flash stock and try again
Happened to me once a couple of weeks ago [stock rom]. tried again and it worked.
I keep getting this after installing the latest o2 stock rom.
It is happening to me with or without stock ROM...
Have you got opera 10 installed? if so uninstall it and the problem should go away. I had the same problem and since removing this version of opera, the problem hasn't re appeared.
I have the stock rom, and this had happened before I installed opera 10.
please help, same error
experiencing the exact same problem...soft resets have been my temporary solution until i find out more info. on the issue
I use Close Process to kill camera.exe or opera.exe when I get this problem. Now when I close Opera, I can use Camera after 5 secs.
I have no idea why.....
I have used my camera here and there on previous firmwares but since using XXJPO i havn't checked but earlier today i went to take a picture and all was well until it focused and then went take picture. It allowed me to aim it and all that but when i hit shoot it made the noise then said camera failed. I then enable review and noticed it was just getting a green capture. What could be the issue? i went into the camera firmware menu and hit phone to cam fw write and shut it down, removed battery and turned back on. Still no go...
What do i do?
Flash back to your original rom, and call tech support for a replacement
Mortify1 said:
Flash back to your original rom, and call tech support for a replacement
Click to expand...
Click to collapse
Umm actually glad to be proving you wrong here, all working fine now and i unlocked it at the same time since i needed to downgrade to test the camera was working fine so here goes what i did for anyone else who gets this issue.
Flash XXJM1 with odin and 512 pit
Be sure to clear all data on reboot into recovery or it will just get stuck in a loop
Then in dialer type *#*#34971539#*#* Select "Phone to CAM FW Write" and "YES"
Reboot phone and the camera should now work
Using Kies flash the latest update which is currently XXJPO in the UK
hydrouk said:
I have used my camera here and there on previous firmwares but since using XXJPO i havn't checked but earlier today i went to take a picture and all was well until it focused and then went take picture. It allowed me to aim it and all that but when i hit shoot it made the noise then said camera failed. I then enable review and noticed it was just getting a green capture. What could be the issue? i went into the camera firmware menu and hit phone to cam fw write and shut it down, removed battery and turned back on. Still no go...
What do i do?
Click to expand...
Click to collapse
I had the same problem get voodoo lag fix if you have any other lag fix un do them before running the voodoo it works rember after you do the lag fix it takes a long time to boot
check that
http://forum.xda-developers.com/showpost.php?p=9314303&postcount=3
My camera worked until I did the OCLF. After that -just like "Hydrouk" - preview ok, but after taking photo (only with main camera and photo -mode, front facing camera and main camera in video mode work just fine) I get the "Camera failed" notification and Camera program exits.
"Camera Firmware" size is 0.00kb
Disabling OCLF did not help, haven't done a firmware update or tried voodoo yet.
Any more info on this?
I'm having the same issue with my Nexus S (GT-i9020) and can't find a solution
hydrouk exactly which ROM did you flash back to? I've just tried XWJM2 from samfirmware.com
That's:
PDA: CODE_I9000XWJM2
Phone: MODEM_I9000XXJM1
CSC: CSC_I9000OXXJM1
And still having exactly the same problem after re-flashing the camera firmware using the code below - I get a green screen or "Camera Failed" message every time I try and start the camera application.
Thanks,
Ben.
Galaxy S GT-I9000 Camera fail
Umm actually glad to be proving you wrong here, all working fine now and i unlocked it at the same time since i needed to downgrade to test the camera was working fine so here goes what i did for anyone else who gets this issue.
Flash XXJM1 with odin and 512 pit
Be sure to clear all data on reboot into recovery or it will just get stuck in a loop
Then in dialer type *#*#34971539#*#* Select "Phone to CAM FW Write" and "YES"
Reboot phone and the camera should now work
Using Kies flash the latest update which is currently XXJPO in the UK
hydrouk - many thanks for your help, this problem has been bugging me for a few months but finally you have solved it. I am once, once again, a very happy Salaxy S user
Hi everyone.
I have encountered a problem on my phone's rear camera with the latest ROM upgrade, which upgraded my android version fom 4.2.2 to 4.3:
I9505XXUEMJ7_I9505BTUEMJ8_BTU
The problem is that I get a dark display (black screen, see the attached screenshot) and the whole phone gets stucked and its performance is slowed down due to that. After about a minute or to of freezing phone I Finally get a warning - Camera Failed.
I tried to wipe twice (both cache partition and user data), prior to and after flashing, and also tried to reflash the same rom again. Didn't work out for me, or at least works once right after wiping and then fails again. Seems like a heavy bug in 4.3, unstables the camera due to the new firmware.
Has anyone had that same problem or reported on it or it's just me? What should I do now?
Thanks.
When you open the camera, did you get a camera firmware update?
Crauze said:
When you open the camera, did you get a camera firmware update?
Click to expand...
Click to collapse
Yes, that was in the first time that opened the built-in camera app after flashing the newest firmware. I proceeded with the update and then all that mess started. But since then I have reflashed and didn't get that message once more to confirm/approve.
Is there a way to downgrade the camera's firmware to the one used in 4.2.2? It really worked really well for me prior to that so called "upgrade"...
Another question: When (roughly) should I9505 models recieve the 4.3.1 update? Is it scheduled to be soon?
Having the same issue (also with other Camera apps like Barcode Scanner, Paper Camera & Optical Reader). If I wait I end up with a "camera fail" message.
UPDATE: Just upgraded to MK8 version using Kies - and the problem persists!
This month's (november) update implies that Samsung are yet to resolve this bug. Does someone know how should I report them about the problem? Is there a website or a social network page that they actually check up on a regular basis?
Thank you.
Hi all, i've just bought this tab and did the manual update from 4.4.2 to the spanish 5.0.1
This works perfect except one strange problem. The keyboard , when i try to donload another language then english i get this error 'can't download language'
So i installed swiftkey, same problem except now its saying 'cant safe'
Anyone else had this problem?
not this one. This official build isn't perfect though it seems. i had some problems with starting the tab. occasionally it just hangs at bootup. hold the power button and it restarts normally. don't know what it is, but wasn't there before the upgrade.
think i'll give the blisspop rom a try soon. just kind of need my camera sometimes
Thanx, but this is the only problem i have , the rest is working perfectly , now installed google belgian keyboard and it's working fine , no restarts or other problems