Hi,
i was using cm10.1 which was running fine, i reloaded the stock jellybean 4.1.1 and now the tablet wont go beyond the flashing samsung boot screen?
i tried going back to ICS 4.0.4
I loaded these via the odin method, what i need is cwm but the tablet is stuck at the bootscreen, any kind person out there get any ideas what i can do
thanks
gazmon
gazmon said:
Hi,
i was using cm10.1 which was running fine, i reloaded the stock jellybean 4.1.1 and now the tablet wont go beyond the flashing samsung boot screen?
i tried going back to ICS 4.0.4
I loaded these via the odin method, what i need is cwm but the tablet is stuck at the bootscreen, any kind person out there get any ideas what i can do
thanks
gazmon
Click to expand...
Click to collapse
What happens when you try to go into recovery or download mode?
Related
I was trying to install cm6 on my phone so i could install cm7. I installed cm6 and now my phone only goes to the splash screen and just sits there.. i booted in to clockwork recovery and non of my back up will work just sits at the splash screen...
xXy3kXx said:
I was trying to install cm6 on my phone so i could install cm7. I installed cm6 and now my phone only goes to the splash screen and just sits there.. i booted in to clockwork recovery and non of my back up will work just sits at the splash screen...
Click to expand...
Click to collapse
What color is the text in your recovery screen?
oRANGE i flashed it to 3.00005 or what ever
Stock, CM6 and all Froyo (Android 2.2) based ROMs are incompatibile with CWM 3.x. That can only be used with Gingerbread (Android 2.3) ROMS like CM7. Install CM7, and you'll be good to go.
Take a look at http://forum.xda-developers.com/showthread.php?t=944681 from TrueBlue_Drew. It's a way of switching between the various versions of CWM. But it won't be useful until you have a working phone.
xXy3kXx said:
oRANGE i flashed it to 3.00005 or what ever
Click to expand...
Click to collapse
If you installed CM 3.x then you need to flash Cyanogen CM7. You'll get a working phone. Don't forget the g/apps either.
i downloaded cm_glacier_full-32.zip and the gapps the phone boots past the splach screen than keeps going through the boot animation
xXy3kXx said:
i downloaded cm_glacier_full-32.zip and the gapps the phone boots past the splach screen than keeps going through the boot animation
Click to expand...
Click to collapse
Try downloading 31, wiping the had set clean, and try a fresh start.
i can get the 32 build to boot with no gaps installed but when i install the gapps thats when i get the boot loop i downloaded gapps-gb-20110120
xXy3kXx said:
i can get the 32 build to boot with no gaps installed but when i install the gapps thats when i get the boot loop i downloaded gapps-gb-20110120
Click to expand...
Click to collapse
thanks for supplying the exact version of the g/apps. Did you by chance check the md5sum? should match 45e175c25a498c8945c543d92d92e782
and are you installing the G/apps pre or post installing the ROM?
Oops I had the wrong gapps file its all good now bro thank you for your time and help I'm very grateful for people like you!! Thanks braa
Sent from my Bubba kush device! ;/
I was using Bionix-v 1.3.1 since last March, flashed over stock 2.2. I also had Rom Manager Premium V4.3.2.3 with CWM 2.5.2.1.
Recently decided to try out a GB rom. So I downloaded CM7 and MIUI 1.6.24. Tried to flash CM7, but just got a quick CWM screen with boot loop. Somehow using 3 button I could go to CWM screen and flash MIUI 1.6.24.
MIUI booted fine for me. One change I noticed is on power up I get the Samsung Vibrant screen and I new "Galaxy S Cyanogen Mod" screen. After that the MIUI boot animation starts.
Since it does not have GPS support I wanted to try Simply Honey 3.8 Revolution. But when I flashed Simply Homey it goes to Boot Loop showing Samsung Vibrant and then Galaxy S Cyanogen Mod screen. Then I tried other GB rom and got similar result. Only MIUI works and boots fine.
The CWM somehow changed to 3.X.X and it does not accept any FRYO rom having old style (with only update-script) file.
I even can not go to Download mode in any way. ( I have not tried the Jig method yet).
Please suggest any solution if you came across similar situation.
Because u were on a gb rom the way to get into download mode is different for gingerbread roms. Theres plenty of info on that on XDa, sorry dont knowit. But once u get the correct info to get into download mode the gingerbread way then odin to stock and all ur problems will be solved!
movieaddict said:
Because u were on a gb rom the way to get into download mode is different for gingerbread roms. Theres plenty of info on that on XDa, sorry dont knowit. But once u get the correct info to get into download mode the gingerbread way then odin to stock and all ur problems will be solved!
Click to expand...
Click to collapse
Thanks for your response.
I have never flashed GB rom using odin, only thing I tried is flashing CM7 using CWM. Does it automatically update the bootloader? If it does, why every other GB rom goes to boot loop?
You got a bootloop on cm7 because its a known bug, if you tried to install it again it would install just fine. You can go between miui and cm 7 easy outer roms are not comparable. I would like to know too if they install a custom bootloader, when you odin you need too install a bootloader too? That could be risky, that why i am scared to odin back.
Sent from my T959 using XDA App
Hi all,,firstly im sorry for my bad english.My iconia a 500 cannot start,it stop when it display "ACER" and on the top left corner show "boot verified failed" in red color.Before it happen, i flash my tablet with "civato FLEXSTRIKER-R9.5/9.6" after i heard about ICS rom official Update will start, iflash it back to stock rom (update unstable rom)then i update it manualy via wifi to 3.2.1 and finally ICS.The problem begin when im forget to erased the file update.zip(unstable)on my sd card and my ICS rom downgraded to unstable.zip.Anybody know how to solve this?please help me!
tarahezecaricicis said:
Hi all,,firstly im sorry for my bad english.My iconia a 500 cannot start,it stop when it display "ACER" and on the top left corner show "boot verified failed" in red color.Before it happen, i flash my tablet with "civato FLEXSTRIKER-R9.5/9.6" after i heard about ICS rom official Update will start, iflash it back to stock rom (update unstable rom)then i update it manualy via wifi to 3.2.1 and finally ICS.The problem begin when im forget to erased the file update.zip(unstable)on my sd card and my ICS rom downgraded to unstable.zip.Anybody know how to solve this?please help me!
Click to expand...
Click to collapse
You must flash a patched bootloader. Use APX mode to install recovery and a patched bootloader then flash a good ICS ROM in CWM
Sent from my Iconia A500 using Tapatalk 2
Thanks for your help,,is there any tutorial how to do this step by step? a link maybe?
blackthund3r said:
You must flash a patched bootloader. Use APX mode to install recovery and a patched bootloader then flash a good ICS ROM in CWM
Sent from my Iconia A500 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for your help,,is there any tutorial how to do this step by step? a link maybe?
heres the guide you need to get a new recovery/bootloader to fix your problem i only just got over this hurdle 2 days ago
http://forum.xda-developers.com/showthread.php?t=1622425
chisme said:
heres the guide you need to get a new recovery/bootloader to fix your problem i only just got over this hurdle 2 days ago
http://forum.xda-developers.com/showthread.php?t=1622425
Click to expand...
Click to collapse
Thanks,its work!after following every step,finally I can flash my tablet again.I want to know if its possible to downgrade ICS to HC 3.2.1(just in case iwant to flash to stock from).By the way I flash my tab with "flexreaper r12.5 special edition" nice custom ICS ROM.
Sent from my A500 using XDA
tarahezecaricicis said:
Thanks,its work!after following every step,finally I can flash my tablet again.I want to know if its possible to downgrade ICS to HC 3.2.1(just in case iwant to flash to stock from).By the way I flash my tab with "flexreaper r12.5 special edition" nice custom ICS ROM.
Sent from my A500 using XDA
Click to expand...
Click to collapse
me to 12.5
im pretty sure you can only go back to HC if you have a full nandroid backup, im not nearly the most advanced user here thou so ask around a bit before you do anything vast.
Hi Guys
I recently updated my 10.1 7500 to ics and all was working fine,
I then flashed a rooted kernal, and since then i have lost all responsiveness to my screen. I have tried flashing stock roms (both HC and ICS) tried running custom recoverys but nothing is getting the screen to respond to my touch!!
It boots up fine, i can use the recovery with buttons all ok, but as soon as it asks to select my language, im f'd!
Any tips of a full restore or solution?
Thanks!
steve_clifton said:
Hi Guys
I recently updated my 10.1 7500 to ics and all was working fine,
I then flashed a rooted kernal, and since then i have lost all responsiveness to my screen. I have tried flashing stock roms (both HC and ICS) tried running custom recoverys but nothing is getting the screen to respond to my touch!!
It boots up fine, i can use the recovery with buttons all ok, but as soon as it asks to select my language, im f'd!
Any tips of a full restore or solution?
Thanks!
Click to expand...
Click to collapse
I would try to odin back to stock and see if that fixes it then go from there. Good luck.
caaznkid said:
I would try to odin back to stock and see if that fixes it then go from there. Good luck.
Click to expand...
Click to collapse
Thanks, i have tried that , have tried multiple kernals and still nothing gets it working?
Any other suggestions?
thanks
Hi guys
Hope you are well. I am trying to flash back HD Revolution 4.1.2 ROM via CWM recovery (Aroma)
During the selection phase, my device hangs up. I assume the recovery is outdated? Not sure.
Where can i find TWRP latest recovery (Flashable .zip)? I have googled, by most of it is dead links?
Or might my problem be something else?
I guess it's just the opposite you probably have a updated recovery for a 4.1.2 ROM
I think the best one to deal with the aroma is this one by Zedomax
http://forum.xda-developers.com/showthread.php?t=1831173
Thanks alot
Yes. That was the case.... installed an older recovery, and it worked...
^^rac said:
Yes. That was the case.... installed an older recovery, and it worked...
Click to expand...
Click to collapse
I'm glad to help you.
Please help me
last time i used N8013 with revolution hd 10.1, till now i tried up new rom on xda but it's not working, its was hand up at samsung logo, and then i tried re setup CMR Download HighOnAndroid v1 ClockworkMod Recovery 6.0.1.1 and then re up rom revolution again, but it till stop at samsung logo, then i find one rom stock on samfirmware KIES_HOME_N8013UEALI3_N8013XARALI3_1081475_REV00_user_low_ship.tar but its has a problem ( factory mode has unabale working) and auto turn off wifi, so i dont know how to turn back my best tab before.
Please help me.
problem with up rom
Hi guys,
Please help me
last time i used N8013 with revolution hd 10.1, till now i tried up new rom on xda but it's not working, its was hand up at samsung logo, and then i tried re setup CMR Download HighOnAndroid v1 ClockworkMod Recovery 6.0.1.1 and then re up rom revolution again, but it till stop at samsung logo, then i find one rom stock on samfirmware KIES_HOME_N8013UEALI3_N8013XARALI3_1081475_REV00_u ser_low_ship.tar but its has a problem ( factory mode has unabale working) and auto turn off wifi, so i dont know how to turn back my best tab before.
Thanks