Ok. I'm going to endeavor to take your heartwarmingly cynical welcoming video to heart. I've looked, and haven't found any threads that looked like they covered this + were new enough not to be necromancy.
Moving to the point. I rooted my Nook ST a ways back, and it was fine. I'm finally moving up in the world, so I was fixing some lingering nags before I passed it along.
So in my infinite idiot wisdom, today I took my non-knowledge of the advanced tweaking of this OS, and replaced settings.apk with one from this site. I've bounced around here so much I couldn't tell you from where. So, the settings button vanishes, the Nook bottombar menu's stops working and perhaps I realize that was silly of me.
I did have the sense to back up the nook's .apk, but after trying to put it back, no change. My questions are thus;
1: Is there a accepted wisdom and method of getting a full android settings menu on the NST, and I just missed it?
2: If no, then is there a way to get the button back in the apps list, and get the nook's menu button to register settings.apk again without doing over from scratch?
Device is non-glow NST, that was Nooter'd, if that matters.
You've broken the unwritten law and you must pay!
The problem is probably that you slapped in a version of Settings.apk and SettingsProvider.apk
that is signed by someone else than B&N.
To restore, you can either pull those two files out of the B&N update and copy them over
or else you can resign your whole system (including those 2 files).
I use the 2 files snagged out of the Eclair emulator and resigned.
Right now the first menu is a bit dim due to lack of a theme
but I'll get around to fixing that sometime soon.
I've got bigger fish to fry right now.
One advantage of a full Settings is that you can use the control
for "USB debugging" to turn on and off ADB, also when configured for WiFi.
Just restore the stuff in init.rc that is commented out:
Code:
on property:persist.service.adb.enable=1
start adbd
on property:persist.service.adb.enable=0
stop adbd
You should be able to reset to the standard nook settings by using nook touch tools. Did you overwrite your standard settings.Apk?
Sent from my NOOK using xda app-developers app
Oh it's gonna be one of those days, I can just tell. I got the settings and settings provider files from the update linked on the nookdevs/Nook_Simple_Touch/Rooting page, and punched them in where they belong. So clearly I got a bootloop. I'm working on getting it to respond enough to get into. I think I broke out of this once before around when I first did this thing up, but no joy so far. I'll try again in the morning.
There are two kinds of "boot loops":
1) Where the Nook is actually restarting periodically.
2) Where the boot animation is running and no app is taking over the screen.
Always see if you can get into your Nook with ADB.
start & stop are good commands to know to control the Android layer on top of Linux.
If it's just the boot animation running, you may have a perfectly viable Linux running under it
and you can fix whatever the problem is with ADB.
Renate NST said:
There are two kinds of "boot loops":
1) Where the Nook is actually restarting periodically.
2) Where the boot animation is running and no app is taking over the screen.
Always see if you can get into your Nook with ADB.
start & stop are good commands to know to control the Android layer on top of Linux.
If it's just the boot animation running, you may have a perfectly viable Linux running under it
and you can fix whatever the problem is with ADB.
Click to expand...
Click to collapse
Gonna go work ADB and see how that goes. The exact behavior I'm seeing, from start up is:
1: The 'Read Forever' page. (Not Root Forever, but it's never done that. I didn't argue before, although it is a little odd.)
2: The nook screen with moving dot. This flashes up, goes through two normal cycles. It then flashes black and goes through one cycle before starting at the beginning of this sentence.
This is 2) I'm assuming?
If the dots jump to the beginning from the middle at any point, that is a restart.
You should be able to get something on logcat over ADB.
Welp, that's amusing.
So, it's sitting, merrily looping away while I set up ADB...
When I look over and it's saying it's restoring factory settings. All by itself. It finishes, looks just the way I left it, and it's back to where it was before I futzed with it.
Um... Thanks, Nook?
And I suppose thanks to you fine folks as well, even if none of us actually seem to have done anything.
8 failed boots gets you into recovery.
Sometimes a failed loop counts as a failed boot and sometimes not.
It should have asked you though if you wanted to do a factory restore.
If you put the uRecImg and uRecRam from Clockwork Mod recovery into /boot,
the recovery will go to that instead.
Renate NST said:
8 failed boots gets you into recovery.
Sometimes a failed loop counts as a failed boot and sometimes not.
It should have asked you though if you wanted to do a factory restore.
If you put the uRecImg and uRecRam from Clockwork Mod recovery into /boot,
the recovery will go to that instead.
Click to expand...
Click to collapse
Well, interesting. Considering it was looping most of the night and a fair part of this morning, it just now figured it out? Fair enough. As a last question, is changing the settings out going to be significantly better for anyone but a power user? This will be going to someone who is tech savvy, but in a different vein. If it was staying with me I'd go for it, and actually do it right. I took leave of my senses this go-round - chalk it up to end of semester brain fry.
Related
Have a nook color, cm7 - screen will not light. Power will cut on and off (i can tell because volume buttons produce noise when on). Screen gives no illumination when on.
Nothing software or programming updated or changed that would have caused it. I've charged it overnight and attempted to cut on while plugged in.
Plugged back into laptop via USB and I can see (nook color icon with yellow exclamation point) but still no screen.
I'm at a loss. Searched all posts but cannot find one similar. Thx!
I know that this happens and is fixable, although I cannot remember where I saw the "official" fix. If you have nandroid backups on a SD card, you could hard reboot the nook with the 8x reboot, and then reflash CWM and restore your backup.
Are you willing to lose your data and temporarily revert to stock?
I'll give anything a try.
Thanks for the idea. I'll try this in the morning and repost. I had thought about hard booting and taking it back but was worried they wouldn't replace it since it had been rooted. I'll go back and research the steps you mentioned. I'm not a techie so it will take a fresh mind and some coffee to pull it off. I was beginning to think it was a bad screen.
Power off nook, and power it back on. As soon as it begins to load, press n, power, and volume+ (I learned it with both volume keys, but I just heard it may only need the +) and hold for about ten seconds. The nook will flash off, release buttons. The nook will automatically restart, so after you release the keys, you want to repress them gain right as it starts to boot (where you would normally see the cyanogen logo). After the eigth time it will load into froyo firmware. If you. Misstime the sequence you will need Ronstadt over, so if it doesn't work the first time, just try again. Maybe a dark room, so you can see the slight illumination somewhat.
Bad screens do happen, I suppose, but the nook is unbrickable from a software standpoint. The primary boot is off the sdcard, so there is always a way to circumvent or preempt anything that may be corrupted internally. If you were to have a bad screen, after you hard reboot the nook, it will load the stock OS, but if you flashed CWM internally that will still be in your emmc. The way to get rid of the CWM is to follow the hard reboot with a factory reset through the froyo menu (standard nook OS for any future readers). If your screen is indeed bad, you can take your chances that they wont notice since they are replacing an obvious hardware issue, or you could hold it next to a working nook and base your touches approximately off that. There aren't that many steps, but you.do have to go through the B&N registration process, and your user name and password would be a *****.
I might just hard reboot and roll the dice myself, although I haven't personally heard of a bad screen yet. Good luck.
Solution worked!!
Thanks so much.....I couldn't get the 8x to work because the screen was not on and I couldn't time it right. The only way I could tell if it was on or off was with the power button making noises. So I held down power and N button together until flash. After the flash the cm7 open screen popped up. woot woot. and many thanks but I can only push the button once.
Hello all, I'm curious to hear your thoughts and advice.
My nook is completely unresponsive. It is not stuck at rooted forever.
In fact this has nothing with a root attempt/reset/restore/power on.
I had done a a fresh reset/root with touchnooter about four months ago and was happily and smoothly reading for about two months. I then got busy and put the nook down, did not touch or use for about another two months. I tried to use it about a week ago but found that it had run out of battery in sleep after the two months of disuse (not surprising). I put it on charge overnight and everything booted right and functioned well once it turned on, except that the battery indicator in the statusbar showed a "?" and the battery info in system info showed 100% "unknown". After alot of fruitless research I put it down with the intention of reset/restore/root when I had the time.
I just picked it up this morning and was faced with the expected "Press then button below to wake up your NOOK" screen. But when I pressed the "n" button nothing happened. Obviously holding the "n" did nothing as well.
I tried to power it off and on- nothing
holding power for 20- nothing
power for 30- nothing
8 failed boots- nothing
left right- nothing
left right power-nothing
random pushing and holding of power- nothing
all these with mem card in and out- nothing
all these plugged usb- nothing
all these pugged ac- nothing
I let it charge some more- nothing
None of the buttons do anything, the screen stays inevitably at the " press the n button to wake" screen. no activity whatsoever except that when It is plugged in, the green light shows. NO ORANGE LIGHT... it is fully charged by both usb and ac.
It is not detected at all by windows anywhere.
In Linux- lsusb, bklid, and df -h yield nothing. My nook might as well be the invisible stupid ereader.
I did not drop it, sumbmerge it, perform magic around it... It has been sitting on a shelf doing nothing.
To repeat, the only thing my nook does is light up green when plugged.
It is unchangeably stuck on poe's face...
If this isn't true brick, I don't know what is.
I'm exhausted. Any ideas? I appreciate the help.
Best,
Thomas
i don't know. i just know my dog ate mine and i'm now in the market for a new screen, so if you don't get it working sell me the unit and get some money for yourself to purchase a new one =D
or you could google the disassembly instructions and try unplugging the battery, not very hard to do. could be of .. some help perhaps?
I would definitely take you up on your offer, but i'm still under warranty.
However, I would still like to have my original, and figure out what is going on and why it happened.
Ideas?
Thank you.
similar problem were solved
Hi! I might have read about similar problem solved on USB host mode here http://forum.xda-developers.com/showpost.php?p=23475998&postcount=131
That's it, thanks so much.
if it help
if it helps let them know in the tread that you had same problem. they are wondering whether it is due to host mode
[N2E]: After automatic update to 1.1, Nook Touch Screen absolutely DEAD--Nothing Work
THIS WAS A POST FROM ANOTHER SITE AS TO MY PROBLEM:
I was reading on my N2E last night. I put it down for about 30 minutes and when I came back it was displaying the default "Authors" screensaver (I had switched to the Nature photos) and asking to slide to unlock. I thought, "Oh, the new software update must have downloaded and installed. I'll check it out." To my shock, the touch screen was completely unresponsive--no amount of swiping would unlock from the screen saver. I let it set for a while longer thinking perhaps the softare update was not yet finished. No such luck.
As a result of the new update, my NOOK is now completly DEAD! I tried powering off, but couldn't do that because you are asked to confirm power off on the touchscreen, which no longer works. So, I looked online and tried the soft reset/reboot by holding down the "Home" or "n" button and then pressing the power button for several seconds. Great--it started rebooting...and came right back to the "authors" screen saver and asking to swipe to unlock. I tried this rebooting process several times, always with the same result: back to screeensaver mode with completely unresponsive touchscreen.
So, looked at the online technical troubleshooting discussion and helps and decided to try a downloaded manual install of the software update. Plugged my NOOK into my computer and it recognized it. So, I downloaded the manualo software update and dragged and dropped it onto the NOOK as directed and sure enough, it started to reboot itself. I thought, "whew, maybe this will fix it". NOPE--came right back to the locked screensaver, with no mention of attempting to update software, and the touchscreen is still dead. (By the way, all of this was done initially with the NOOK showing about 94% charged, so it was not a battery issue.)
Reconnected the NOOK to my computer and the software update file was gone from its home directory, which implies it did something with it. So, I tried repeatedly to install the software update manually, always with the same result: NOOK comes back to locked default "authors" screensaver wtih a dead touchscreen.
Looked online for B&N technical support again saw that others had this problem (though only found a couple references). Found the instructions to do a factory reset and reluctantly tried that, desparate to make my NOOK work again, but frustrated that if it did I would have to rebuild everyting on it and download my 400+ B&N book library all over again. But, guess what, factory reset just comes up to the "Welcome to your all-new NOOK" screen (sounds like progress), BUT the touchscreen is STILL dead, so I can't hit the "Next" button onscreen to proceed with setting up my factory-reset NOOK. Tried rebooting again (as this seems to be the only solution offered in the online tech support) and now it just keeps coming back to the "Welcome to your all-new NOOK" screen with a dead touchscreen keeping me from doing anything.
So, now I am taking it back to my local B&N store in hopes they will exchange it for a new NOOK.
I really want to see a feature to disable automatic updates in the future. I specifically didn't download and manually install when the update came out, figuring I'd wait for the automatic download to give time to B&N to work out the bugs and perhaps issue a patch (as they have done in the past for the N1E). Instead I get no warning about the automatic download (happens while I am reading and set the NOOK aside for 30 minutes), and then the update KILLS my NOOK.
I am not a satisfied NOOK customer at this point.
MY POST: (from the that site)
Not Sure how to do this post or whatever, but I was happy until the update and everything that happened to you is the same with me. This is the first post that describes what happened to me. I'm out of warranty and refuse (and can't) to buy another one of these. If their updates can do this, I'm not sure I want to sink another $100 into the shareholders pockets. I'd really like to know if anyone knows what may be wrong with it.
In addition to what was already mentioned, I took the battery out several times(which seems intimidating but very easy but voids the warranty) and took it completely apart cleaning the screen very well with water and another time a glass cleaner. I tried rooting also. Not sure of what to do now. It seems software related due to working fine until the update. Still at the "Welcome to your all-new NOOK" screen with unresponsive screen. I wasn't sure if the last sentence from B&N was a personal message to me welcoming me to the "new" state of the my nook.
Thanks for any help from anyone.
Thanks.
Identical problem.... and no fix..
It is a shame you got no solution for this. and the worst, you are not the only one... it happened exactly the same with my Nook ST....
Hopeless...
Machiavelli_The_Man said:
THIS WAS A POST FROM ANOTHER SITE AS TO MY PROBLEM:
I was reading on my N2E last night. I put it down for about 30 minutes and when I came back it was displaying the default "Authors" screensaver (I had switched to the Nature photos) and asking to slide to unlock. I thought, "Oh, the new software update must have downloaded and installed. I'll check it out." To my shock, the touch screen was completely unresponsive--no amount of swiping would unlock from the screen saver. I let it set for a while longer thinking perhaps the softare update was not yet finished. No such luck.
As a result of the new update, my NOOK is now completly DEAD! I tried powering off, but couldn't do that because you are asked to confirm power off on the touchscreen, which no longer works. So, I looked online and tried the soft reset/reboot by holding down the "Home" or "n" button and then pressing the power button for several seconds. Great--it started rebooting...and came right back to the "authors" screen saver and asking to swipe to unlock. I tried this rebooting process several times, always with the same result: back to screeensaver mode with completely unresponsive touchscreen.
So, looked at the online technical troubleshooting discussion and helps and decided to try a downloaded manual install of the software update. Plugged my NOOK into my computer and it recognized it. So, I downloaded the manualo software update and dragged and dropped it onto the NOOK as directed and sure enough, it started to reboot itself. I thought, "whew, maybe this will fix it". NOPE--came right back to the locked screensaver, with no mention of attempting to update software, and the touchscreen is still dead. (By the way, all of this was done initially with the NOOK showing about 94% charged, so it was not a battery issue.)
Reconnected the NOOK to my computer and the software update file was gone from its home directory, which implies it did something with it. So, I tried repeatedly to install the software update manually, always with the same result: NOOK comes back to locked default "authors" screensaver wtih a dead touchscreen.
Looked online for B&N technical support again saw that others had this problem (though only found a couple references). Found the instructions to do a factory reset and reluctantly tried that, desparate to make my NOOK work again, but frustrated that if it did I would have to rebuild everyting on it and download my 400+ B&N book library all over again. But, guess what, factory reset just comes up to the "Welcome to your all-new NOOK" screen (sounds like progress), BUT the touchscreen is STILL dead, so I can't hit the "Next" button onscreen to proceed with setting up my factory-reset NOOK. Tried rebooting again (as this seems to be the only solution offered in the online tech support) and now it just keeps coming back to the "Welcome to your all-new NOOK" screen with a dead touchscreen keeping me from doing anything.
So, now I am taking it back to my local B&N store in hopes they will exchange it for a new NOOK.
I really want to see a feature to disable automatic updates in the future. I specifically didn't download and manually install when the update came out, figuring I'd wait for the automatic download to give time to B&N to work out the bugs and perhaps issue a patch (as they have done in the past for the N1E). Instead I get no warning about the automatic download (happens while I am reading and set the NOOK aside for 30 minutes), and then the update KILLS my NOOK.
I am not a satisfied NOOK customer at this point.
MY POST: (from the that site)
Not Sure how to do this post or whatever, but I was happy until the update and everything that happened to you is the same with me. This is the first post that describes what happened to me. I'm out of warranty and refuse (and can't) to buy another one of these. If their updates can do this, I'm not sure I want to sink another $100 into the shareholders pockets. I'd really like to know if anyone knows what may be wrong with it.
In addition to what was already mentioned, I took the battery out several times(which seems intimidating but very easy but voids the warranty) and took it completely apart cleaning the screen very well with water and another time a glass cleaner. I tried rooting also. Not sure of what to do now. It seems software related due to working fine until the update. Still at the "Welcome to your all-new NOOK" screen with unresponsive screen. I wasn't sure if the last sentence from B&N was a personal message to me welcoming me to the "new" state of the my nook.
Thanks for any help from anyone.
Thanks.
Click to expand...
Click to collapse
The factory restore does not actually fix every possible problem with your Nook.
If your Nook responds at all, try to boot it up on an SD card like ClockworkMod or noogie.
At least that way you can see what is happening.
The partitioning might have become corrupted which the "factory restore" does not touch.
If no response with anything, try disconnecting the battery.
You might also try booting over USB using the techniques in rooting the new white glow.
Hello I was wondering if I'm just screwed I bought 2 nook simple touch, one for me and one for a present to my mother for her birthday on march 16. I bought them at best buy for $40 a piece on January 30. I used mine and was perfect but when I tried to set up my mom it wouldn't load the license agreement, always got stuck or reboot or something, so I loaded cwm on an sd card just to play around, tested on my nook and was fine, then put it on my moms nook booted once then I didn't press anything and turn it off then I load the image but when I tried to boot again it got stuck on the load screen and wont do anything, no reset sequence will work with the sd card on or off the other nook boots with this sd card. at the end I exchanged with my mom she is happy with her nook an I have a useless unit do you think they will exchange it I didn't rooted it or did anything to it but has the n cwm splash on screen forever. I'm in Costa Rica right now and wont return home until May do you think I'll might be able to exchange it or should I just try to repair it.
I'm glad that your mother got the working one!
You say that that one will boot on your CWM SD card, but yours won't?
It may be hard to get your unit exchanged with a conspicuous screen on it, even if it's not your fault.
When you plug it into your desktop is there any indication of a new USB device found?
If it's charged and no amount of the power button gets a reaction, I'd open it up.
any news???
Hi endor43, same problem here, have been able to find any solution?
endor43 said:
Hello all, I'm curious to hear your thoughts and advice.
My nook is completely unresponsive. It is not stuck at rooted forever.
In fact this has nothing with a root attempt/reset/restore/power on.
I had done a a fresh reset/root with touchnooter about four months ago and was happily and smoothly reading for about two months. I then got busy and put the nook down, did not touch or use for about another two months. I tried to use it about a week ago but found that it had run out of battery in sleep after the two months of disuse (not surprising). I put it on charge overnight and everything booted right and functioned well once it turned on, except that the battery indicator in the statusbar showed a "?" and the battery info in system info showed 100% "unknown". After alot of fruitless research I put it down with the intention of reset/restore/root when I had the time.
I just picked it up this morning and was faced with the expected "Press then button below to wake up your NOOK" screen. But when I pressed the "n" button nothing happened. Obviously holding the "n" did nothing as well.
I tried to power it off and on- nothing
holding power for 20- nothing
power for 30- nothing
8 failed boots- nothing
left right- nothing
left right power-nothing
random pushing and holding of power- nothing
all these with mem card in and out- nothing
all these plugged usb- nothing
all these pugged ac- nothing
I let it charge some more- nothing
None of the buttons do anything, the screen stays inevitably at the " press the n button to wake" screen. no activity whatsoever except that when It is plugged in, the green light shows. NO ORANGE LIGHT... it is fully charged by both usb and ac.
It is not detected at all by windows anywhere.
In Linux- lsusb, bklid, and df -h yield nothing. My nook might as well be the invisible stupid ereader.
I did not drop it, sumbmerge it, perform magic around it... It has been sitting on a shelf doing nothing.
To repeat, the only thing my nook does is light up green when plugged.
It is unchangeably stuck on poe's face...
If this isn't true brick, I don't know what is.
I'm exhausted. Any ideas? I appreciate the help.
Best,
Thomas
Click to expand...
Click to collapse
There are times when a Nook gets in a mode where it won't accept a charge.
Opening it up and disconnecting the battery for a minute might fix this.
endor43 said:
That's it, thanks so much.
Click to expand...
Click to collapse
When this worked for you did the light turn orange right when you plugged the battery back in? I just took the battery out, plugged the nook into a charger, and with it plugged in plugged the battery back in and the light stays green the whole time yet I'm not able to use the nook at all.
My nook second generation is not responding to my touch I tried everything to get it to work and I eventually got it to completely power of what if it does not work when I turn it on what should I do
It could be power/battery problems.
Check to see if it makes itself known when the USB is plugged in.
If it reacts at all, that's an indication of life.
Hi all
Apologies at coming on here and immediately asking for help, but....
I've had my Nexus 7 since July and have been very happy until NOW!
I seem to have been cursed with the dreaded flat battery resulting in n7 being stuck in the boot up.
I get as far as the Google and X icon but then stalls.
I've tried all the methods of long push of buttons/multiple buttons/etc but to no avail.
I can bring up the factory restore option so I know I can get it working again, but....
I have an exam in a week which foolishly had work stored for on my n7 without back up (yes fool) so....
Please is there anyway to retrieve my files via PC etc before factory resetting
All help genuinely appreciated
Mark
rooted vs unrooted (or unlocked bootloader even if not rooted) makes a huge difference in the answer.
Please state which.
Sorry about that
Not rooted.
It is absolute stock, nothing changed or added from purchase other than jellybean updates
Thanks Mark
pleading said:
Sorry about that
It is absolute stock, nothing changed or added from purchase other than jellybean updates
Thanks Mark
Click to expand...
Click to collapse
I believe you are SOL in that case. Sorry.
Find someone with a Nexus 7, pop the back cover off and use their battery to boot up and retrieve your files. The back cover just pops off.
Sent from my Nexus 7 using xda app-developers app
bigbop said:
Find someone with a Nexus 7, pop the back cover off and use their battery to boot up and retrieve your files. The back cover just pops off.
Click to expand...
Click to collapse
pleading mentions the battery, but then says "stalls" - not "shuts down", which is what you might expect if the battery was drained:
pleading said:
I seem to have been cursed with the dreaded flat battery resulting in n7 being stuck in the boot up.
I get as far as the Google and X icon but then stalls.
Click to expand...
Click to collapse
But, bigbop could be correct if pleading meant "low battery shutdown"
One other very long shot - assuming that that the device is hung - is to see if either adb or MTP are available. Normally that happens very late in the boot & I have to imagine that he has already tried that though.
Hi again guys
Firstly thanks for not giving up on my situation!
Bad explanation by me I guess....
The battery went flat/dead (my bad)
Plugged in to charge and screen lit up again but showing the 'powering off' script
Left over night on charge, wouldn't switch on again next morning
Left on charge all day still no joy but if I try switching on whilst plugged in I first get the Google name, then the Google X but then gets 'hung' (probably a better description than freezes etc as it still pulsates the colours)
Only way to get out of this is to keep power button pressed which switches n7 off and starts the cycle again
If during the recycle I keep the volume down pressed then it accesses the option screen to recover/reboot etc
Hope this helps, and again thanks (desperate to recover course work)
Mark
Hi again
Update...
Battery is showing full now
But still same 'hung' situation
Regarding the 'ADB'
I can get to the 'apply update from ADB' option
And if I choose it states.... 'now send the package you want to apply to the device with "adb sideload <filename>"'
As always thanks for any help or suggestions
Mark
Mark,
It sounds to me like what you are describing is ADB in the stock recovery, not a ADB when the regular operating system is running. (Is that right?)
Unfortunately, the stock recovery is only good for 2 things: applying an OTA update, and doing a factory reset. Even if your tablet needed an OTA update (and it probably doesn't if it is up to date), it probably wouldn't fix the looping/wedged phenomenon: usually that is caused by stuff in the userdata partition.
Doing the stock recovery factory reset might cure the wedged/looping problem - but only if it wipes all the data from your tablet. (Including the /sdcard area too).
The only hope I held out was if your tablet was reachable via a ADB or MTP with the wedged operating system sitting there looping. Usually those facilities start up quite late in the boot sequence, however so probably you don't have that.
Sorry. I think you are still SOL when it come to retrieving files.
Thanks for the help anyway
I'm guessing that with no further responses that really is the end for my work.
Unfortunately for me personally it will mean the end off my relationship with the N7, as much as I've loved it I really can't justify the obviously common occurrence of this happening.
Thanks again all
pleading said:
Thanks for the help anyway
I'm guessing that with no further responses that really is the end for my work.
Unfortunately for me personally it will mean the end off my relationship with the N7, as much as I've loved it I really can't justify the obviously common occurrence of this happening.
Thanks again all
Click to expand...
Click to collapse
I had same sort of problem N7 went flat tried to charge but would not power on
Took back panel off and disconnected battery for 10 mins reconnected battery and put back on charge
it then booted up as normal
pleading said:
Thanks for the help anyway
I'm guessing that with no further responses that really is the end for my work.
Unfortunately for me personally it will mean the end off my relationship with the N7, as much as I've loved it I really can't justify the obviously common occurrence of this happening.
Thanks again all
Click to expand...
Click to collapse
Uhhh ... what?
The OP was about a tablet that you couldn't get into because
[a] it had a correctable soft-fault
you didn't want to exercise an available soft-fault recovery method because of a desire to reclaim user files not backed up
... and so far as we know the soft-fault recovery mechanism still is available to you.
How did that morph into "this is the end"?
You need to re-do your homework, perform a factory reset, and move on with your life.
You have used either software or hardware in the past haven't you? That thing isn't a toaster or a waffle-iron! No backups of important stuff? Come on!
OK, well then. Pack it up and send it to me with the charger and I'll pay for the shipping - UPS ground.
Doesn't the Nexus have a safe-boot mode?
Sent from my Nexus 7 using xda app-developers app
bigbop said:
Doesn't the Nexus have a safe-boot mode?
Click to expand...
Click to collapse
Just tried right now - held the Vol-down button down continuously from about 2 secs after the Google B&W splash screen appeared until the lock screen appeared. That worked. (Stock 4.2.2)
"Safe mode" appears in the lower left corner. I had access to all the market apps (that I tried), but did not see a toast notification from StickMount after the boot - suggesting that safe mode only inhibits apps from starting on boot.
I suppose this could work (although the OP's deadline has probably come and gone) for bypassing a hung boot - but only if the hang is due to a market app that normally starts on boot.
So, my mother set a password to her tablet, forgot what it was, and fixing it fell to me.
I looked up how to do a hard reset, with the power and volume button, and the lock switch, and initially it did not work. I tried it again, and what resulted was a picture of the Android icon with a back panel open and his gears showing. I left it there a moment thinking that might be a process of the hard reset, but after a while I figured it probably wasn't.
I turned off the tablet again. looked around for a better guide, and tried it again... It basically asked me to do the same thing but was more specific about it. I did the same thing... This time it seemed to work. An erasing data message appeared, but then in red I had another error that was something to the effect of, "Bootloader something or other, nope can't do it" in red.
Now when I try to boot at all, it's just stuck on ICONIA TAB loading screen.
Is it bricked or is there something I can do about it? I saw some threads about plugging it into a computer and copying over some files, but... they were all for the A500, and I don't want to mess it up further... So... Any have any ideas?
I would also add, plugging it into my Win7 desktop with a mini-USB to USB cable doesn't seem to register anything under the list of my drives. Soooo... unless anyone has some light to shed, I really can't imagine what I even COULD do... It won't boot. Computer doesn't recognize it. This is new territory to me, but I'm not technically incompetent.
There is no warranty so whatever has to be done can be tried.
Okay, maybe I'm not giving people time to respond, but maybe there's a way to boot from a flash drive? How would I set that up?
The problem is that I'm familiar with computers... not so much with android smart phones/tablets. Do they just design these things to become bricks, because it seems like we've had computers for a long time that you could open up a BIOS, boot from somewhere else, install an OS... fix the problem. Either there's a way to do that or I don't understand why people use these devices.
I've had this Motorola Droid RAZR for like two years now and a friend of mine took it and worked on it, adding something called "Cyanogen Mod" and he 'rooted' it I believe? Ever since, phone has worked great. However, today I tapped the home button and the whole screen had a weird visual glitch where the wallpaper was entirely intact but the icons and such were only half appearing, like someone scratched them out with fingernails or something. It would go away and come back so I got frustrated and rebooted my phone. It starts up normally and goes to this screen where you can do different stuff with Cyanogen mod (like changing the rom? or changing boot options) and usually I just continue past that because for 1) I know nothing about it and 2) It always was fine. But when it did the typical boot up, it just skipped back to the first screen you get when you turn the phone on and repeats. It never goes to the second part of the Cyanogen Mod where the words appear and the little thing spins, it simply skips back to the screen you get when you power up and repeats. It keeps doing this and I looked online how to fix it, tried about twelve different things (like restoring different aspects and using different roms or making new roms) and it just didn't work. Eventually it got bugged out where the screen was just black, couldn't get it to do anything but reboot and go back to black. I let it sit until the battery ran dry I believe and now I'm at a brick wall.
Is there a way I can totally just revamp and start fresh? Like remove all of it and reinstall Cyanogen mod/the OS and all that jazz? I don't mind losing everything if I can just keep the phone, I don't pay for a cellphone and I don't want one I just use the droid for texting apps/games/reddit/etc. If anyone could help me save this thing I'd appreciate it.
Hi there,
Please stand by until mods will move this thread to the related forum for Droid RAZR.
For reply or ask other questions you must register an account.
Stand by
Hello? Can Somebody help me out, I've waited a couple days now and no one has said a thing?
You have safestrap installed, correct? If so, what version?
Dr. Mario said:
You have safestrap installed, correct? If so, what version?
Click to expand...
Click to collapse
How would I know if I had it installed? I remember when I booted up the phone something came on with a picture of a little robot that said "Safestrap Enabled" and then when I had this problem it was saying "Safestrap Disabled". I can't get the phone to turn on right now though, is there a way I can check what version I have another way?
Ah. I see. First. try entering Safestrap menu upon rebooting, instead of allowing it to boot normally, and look at ROM slot and see if custom OS' ROM slot is active. If it's there and is not active try reactivate it. If it won't budge, get microSD card and find XT910 (RAZR - spyder) CM 11. If you don't know what to pick, I will look in a bit.
Dr. Mario said:
Ah. I see. First. try entering Safestrap menu upon rebooting, instead of allowing it to boot normally, and look at ROM slot and see if custom OS' ROM slot is active. If it's there and is not active try reactivate it. If it won't budge, get microSD card and find XT910 (RAZR - spyder) CM 11. If you don't know what to pick, I will look in a bit.
Click to expand...
Click to collapse
Just tried booting it up, nothing is working I think the phone is dead. I plug it into the charger and only the notification light on the top left goes on a blueish white and stays on as long as it is plugged into the charger. Nothing will turn on at all and the phone doesn't seem to respond to anything. Is my phone just dead..?
Soft bricked. Try pushing both volume down and up button while plugged into either computer or charger, and hold down power button until it boots. I hope you won't need to buy Motorola factory cable at this point.
Let your device charge for a few hours until it boots up. Then boot it into APfastboot and flash the stock firmware with RSDLite.
ATTACK said:
Let your device charge for a few hours until it boots up. Then boot it into APfastboot and flash the stock firmware with RSDLite.
Click to expand...
Click to collapse
In English please?
Edit: Just plugged it in like you said and instantly the boot screen came on rather than simply that silly light so I think my phone is improving but I still would like to entirely revamp it or redo it or whatever you wanna call it so that everything is fresh and new and my phone is okay.
Good. I think it could be because the battery died somehow. Good thing the protection mechanism on the bootloader didn't have the wild idea of disabling the phone.