Database Users

Bricked GT540 by donwngrading from 2.2 to 2.1

So guys I've managed to brick my optimus (tried to flash 2.1 via kdz over 2.2)
It broke half way doing flashing. Now that same thing happens evry time I try flashing it (something about missing dlls)
Any help?
here is kdz log:
[09:33:57:583] : Start Web Downloading
[09:33:57:583] : Get Usb Port
[09:33:57:591] : rsi.strFriendlyName=Communications Port (COM1)
[09:33:57:591] : Remove Communications Port (COM1)
[09:33:57:591] : rsi.strFriendlyName=LGE Bluetooth TransPort (COM23)
[09:33:57:591] : Remove LGE Bluetooth TransPort (COM23)
[09:33:57:591] : rsi.strFriendlyName=LGE Android Platform USB Serial Port (COM24)
[09:33:57:592] : FriendlyNameList[iii].szFriendlyName=LGE Android Platform USB Serial Port
[09:33:57:592] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 1 - COM24
[09:33:57:592] : Port = COM24
[09:33:57:593] : Clear
[09:33:57:593] : Clear
[09:33:57:594] : UNKNOWN : Req(12) -> Rsp(13)
[09:33:57:594] : Clear
[09:33:57:595] : UNKNOWN : Req(12) -> Rsp(13)
[09:33:57:595] : Clear
[09:33:57:596] : UNKNOWN : Req(12) -> Rsp(13)
[09:33:57:596] : >> DIAG_STATUS_F FAILED
[09:33:57:601] : >>Get Model Name [DIAG_VERNO_F]
[09:33:57:601] : Clear
[09:33:57:602] : BAD CONN MODE : Req(0) -> Rsp(3)
[09:33:57:602] : Clear
[09:33:57:603] : BAD CONN MODE : Req(0) -> Rsp(3)
[09:33:57:603] : Clear
[09:33:57:604] : BAD CONN MODE : Req(0) -> Rsp(3)
[09:33:57:604] : Clear
[09:33:57:605] : BAD CONN MODE : Req(0) -> Rsp(3)
[09:33:57:605] : Clear
[09:33:57:606] : BAD CONN MODE : Req(0) -> Rsp(3)
[09:33:57:606] : Clear
[09:33:57:607] : BAD CONN MODE : Req(0) -> Rsp(3)
[09:33:57:607] : FAIL (No Phone)
[09:33:57:607] : GetModelName() Operation Failed Check Diag CMD
[09:33:57:607] : EMERGENCY Booting Mode
[09:33:57:607] : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[09:33:57:607] : Clear
[09:33:57:607] : Clear
[09:33:57:608] : BS/GT540/7Dp0501#1#{86e0d1e0-8089-11d0-
[09:33:57:608] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 0 - GT540
[09:33:57:608] : >>Get Mobile SW [DIAG_EXT_BUILD_ID_F]
[09:33:57:608] : Clear
[09:33:57:608] : Clear
[09:33:57:609] : DLOAD_NAK_F reason_msb = 6, reason_lsb = 6
[09:33:57:609] : [ DLOAD ERROR ] : NAK_INVALID_CMD
[09:33:57:609] : Clear
[09:33:57:610] : DLOAD_NAK_F reason_msb = 6, reason_lsb = 6
[09:33:57:610] : [ DLOAD ERROR ] : NAK_INVALID_CMD
[09:33:57:610] : Clear
[09:33:57:611] : DLOAD_NAK_F reason_msb = 6, reason_lsb = 6
[09:33:57:611] : [ DLOAD ERROR ] : NAK_INVALID_CMD
[09:33:57:611] : FAIL
[09:33:57:611] : Clear
[09:33:57:611] : Clear
[09:33:57:622] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[09:33:57:622] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[09:33:57:622] : Clear
[09:33:57:623] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[09:33:57:623] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[09:33:57:623] : Clear
[09:33:57:624] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[09:33:57:624] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[09:33:57:624] : NV Write Fail : NV ITEM 9028(9028)
[09:33:57:724] : m_pPhoneCtrl->m_pDload->Dl_GetCommMode(&m_pPhoneCtrl->m_pDload->m_nCommMode)
[09:33:57:724] : >> GET DLOAD COMM MODE
[09:33:57:724] : Clear
[09:33:57:724] : Clear
[09:33:57:725] : [GetCommMode] Communication mode : 2
[09:33:57:725] : Pre Nand Download
[09:33:57:725] : >>Set Trusted Mode [DLOAD_NAND_SEC_MODE] sec_mode = 1 (1=trusted 0=NonTrusted)
[09:33:57:725] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - TRUSTED MODE
[09:33:57:725] : Clear
[09:33:57:725] : Clear
[09:33:57:726] : [COM24] >>NandFlashInitWithFile(PARTITION TBL), BinType =8
[09:33:57:726] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - INIT PARTITION TBL
[09:33:57:726] : Clear
[09:33:57:726] : Clear
[09:33:57:737] : Clear
[09:33:57:737] : Clear
[09:33:57:738] : ¸Ţ˝ĂÁö ş¸łż TYPE_WPARAM_WRITE_TO_SDRAM 3
[09:33:57:738] : [COM24] Check BCPL Status ...
[09:33:57:740] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - Check BCPL
[09:33:57:741] : WaitRsp_1
[09:33:57:841] : Error Read in WaitRsp
[09:33:57:841] : [COM24] >> BCPL Off ...
[09:33:57:841] : m_nSelectedImages= 70787108
[09:33:57:841] : m_nSelectedImages= 70787108,Type= 13
[09:33:57:841] : [COM14] ¸Ţ˝ĂÁö ş¸łż TYPE_WPARAM_WRITE_OEMSBL 18
[09:33:57:841] : [COM24] >>NandFlashInitWithFile(OEMSBL HEADER), BinType =12
[09:33:57:841] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - INIT OEMSBL HEADER
[09:33:57:841] : Clear
[09:33:57:841] : @@ Cable Disconnected - Writing : 5
[09:33:57:841] : Clear
[09:33:57:841] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - Close Port
[09:33:57:841] : Close Port<<
[09:33:57:841] : Clear
[09:33:57:841] : [COM24] FAIL
[09:33:57:841] : >>NandFlashWrite OEMSBL
[09:33:57:841] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - FLASHING OEMSBL
[09:33:57:844] : ¸Ţ˝ĂÁö ş¸łż ProgreassiveBar Init wParam TYPE_WPARAM_PROGRESSIVE_POS=5 lParam(pos)=0 nResult=0
[09:33:57:844] : FAIL
[09:33:57:844] : Debug Log Start ======================================
[09:33:57:844] : Ram Writing
[09:33:57:844] : NandAddr : 0x00000001, Size : 0
[09:33:57:844] : TargetAddr : 0x00000000
[09:33:57:844] : Debug Log End ========================================
[09:33:57:844] : >> RETRY(1)
[09:33:58:344] : FAIL
[09:33:58:344] : Debug Log Start ======================================
[09:33:58:344] : Ram Writing
[09:33:58:344] : NandAddr : 0x00000001, Size : 0
[09:33:58:344] : TargetAddr : 0x00000000
[09:33:58:344] : Debug Log End ========================================
[09:33:58:344] : >> RETRY(2)
[09:33:58:844] : FAIL
[09:33:58:844] : Debug Log Start ======================================
[09:33:58:844] : Ram Writing
[09:33:58:844] : NandAddr : 0x00000001, Size : 0
[09:33:58:844] : TargetAddr : 0x00000000
[09:33:58:844] : Debug Log End ========================================
[09:33:58:844] : ERROR : NandFlashWrite(OEMSBL)
[09:33:58:844] : TYPE_WPARAM_UPGRADE_ERROR
[09:33:58:844] : ¸Ţ˝ĂÁö ş¸łż - TYPE_WPARAM_UPGRADE_ERROR Error Code = 1010
[09:33:58:904] : Log finished
Click to expand...
Click to collapse

Flash a rom with fastboot and type 'fastboot -w'.
Joost

Boot in download mode and try again

[Q] rooted yet cant install roms or get to bootloader???

im typically just trolling around lol. however today i need to post. so heres my deal. i have my gt540 upgraded to the stock 2.1 but its rooted. well kinda???
i did the super one click and rooted the phone but im stuck. if i igo into rom manager and try to load one of the dev apps for the gt540 its prompts me to install from boot. when it reboots i get a black screen and about a minute later the original os is loaded. im sorry i know im a noob any help would be super.
also a side note. whenever i try and get into fastboot or anything it just loads the regular rom.
so i really am lost and would love any feedback.
thanks in advance!

rom manager downloads wont work on are phone and also you need clockwork installed also the install backup etc

cant seem to get clockwork installed. dude im the guy who always googles cause i know im gonna look like a fool asking. lol. can you please send me in the right direction with links and download sites? thanks man!

In gt540 android devlopment search for 'how to'
Author-lavero burgos.
You will have all you ned.
Sent from my GT540 using XDA App

tried that and got nothing...do you happen to have a link? sorry to pester you.

here the link to the thred
http://forum.xda-developers.com/showthread.php?t=1032744

I finnaly found someone who has the same problem.
I do the flashing on a friends phone same as i did on my multiple times SUCCSESFULLY
and KDZ flashes it Ok, but it just loads up same rom. The background is not changed, apps are here but arent working.
i do a hard reset, see that i've lost some languages, means it's flashed but it's not!
I tried even cs-recovery flash and it just wont.
I repeat, i did the processs multiple times on my phone alwyes succsesfully
--->I also updated that very same phome to 2.1 with KDZ when he got it<---
It flashes the phone but its not flashed. No fastboot. it looks like i'ts partially flashed.
how's that even possible?
Whats the deal with that, i'm getting crazy here?
i will upload a KDZ log if somone knows to check it..
here's normal flash
Code:
[19:42:04:863] : =============================================
[19:42:04:863] : Log is started on 12.04.2011, at 19:42:04:863,
executable: C:\flasher\KDZ_FW_UPD.exe (ProcID: 0x00000ed8),
compile time : Sep 8 2010 17:19:53
[19:42:04:863] : Version :
[19:42:04:864] : strFilename1 = eur
[19:42:04:864] : m_DlMode = 4, m_strBinaryPath = C:\ProgramData\LGMOBILEAX\Phone\europen+fastboot.dz, m_nSelectedImages= 70787108
[19:42:13:046] : Start Web Downloading
[19:42:13:046] : Get Usb Port
[19:42:13:061] : rsi.strFriendlyName=Communications Port (COM1)
[19:42:13:061] : Remove Communications Port (COM1)
[19:42:13:061] : rsi.strFriendlyName=LGE Android USB Serial Port (COM14)
[19:42:13:061] : FriendlyNameList[iii].szFriendlyName=LGE Android USB Serial Port
[19:42:13:061] : rsi.strFriendlyName=LGE Android USB GPS NMEA Port (COM13)
[19:42:13:061] : Remove LGE Android USB GPS NMEA Port (COM13)
[19:42:13:061] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 1 - COM14
[19:42:13:061] : Port = COM14
[19:42:13:061] : Clear
[19:42:13:061] : Clear
[19:42:13:077] : >> DIAG_STATUS_F FAILED
[19:42:13:093] : >>Get Model Name [DIAG_VERNO_F]
[19:42:13:093] : Clear
[19:42:13:108] : strModel = GT540
[19:42:13:108] : Read NV item: 71 NV ITEM 71 [71]
[19:42:13:108] : Clear
[19:42:13:124] : CSW
[19:42:13:124] : Banner : CSW
[19:42:13:124] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 0 - GT540
[19:42:13:124] : >>Get Mobile SW [DIAG_EXT_BUILD_ID_F]
[19:42:13:124] : Clear
[19:42:13:139] : GT540-M76XX-V20a-OCT-05-2010-XX
[19:42:13:139] : strFilename = GT540-M76XX-V20a-OCT-05-2010-XX
[19:42:13:139] : strFilename = V20
[19:42:13:139] : Flag_Phone_BIN_Eclair = TRUE
[19:42:13:139] : Clear
[19:42:13:155] : Write NV item:9028 NV ITEM 9028
[19:42:13:155] : 9028 - NV_DONE_S Item
[19:42:13:264] : _DloadMode()
[19:42:13:264] : ¸Ţ˝ĂÁö ş¸łż TYPE_WPARAM_CHANGE_DLOAD 4
[19:42:13:264] : >>Change Offline Mode [DIAG_CONTROL_F/Mode = 1]
[19:42:13:264] : Clear
[19:42:13:280] : >>Change Dload Mode [DIAG_DLOAD_F]
[19:42:13:280] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - DLOAD
[19:42:13:280] : Clear
[19:42:13:280] : 2_DIAG_DLOAD_F DLOAD_RESET_F do not wait for response
[19:42:13:280] : #ifdef FEATURE_L4
[19:42:13:280] : Clear
[19:42:13:280] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - Close Port
[19:42:13:280] : Close Port<<
[19:42:53:281] : Clear
[19:42:53:281] : EMERGENCY Booting Mode
[19:42:53:281] : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[19:42:53:281] : Clear
[19:42:53:281] : Clear
[19:42:53:292] : BS/GT540/7D
[19:42:53:292] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 0 - GT540
[19:42:53:292] : m_pPhoneCtrl->m_pDload->Dl_GetCommMode(&m_pPhoneCtrl->m_pDload->m_nCommMode)
[19:42:53:292] : >> GET DLOAD COMM MODE
[19:42:53:292] : Clear
[19:42:53:292] : Clear
[19:42:53:293] : [GetCommMode] Communication mode : 2
[19:42:53:293] : Pre Nand Download
[19:42:53:293] : >>Set Trusted Mode [DLOAD_NAND_SEC_MODE] sec_mode = 1 (1=trusted 0=NonTrusted)
[19:42:53:293] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - TRUSTED MODE
[19:42:53:293] : Clear
[19:42:53:293] : Clear
[19:42:53:294] : [COM14] >>NandFlashInitWithFile(PARTITION TBL), BinType =8
[19:42:53:294] : NandFlashInitWithFile :: LG3GBinaryList[BinType].szBinaryTypeName = PARTITION TBL, BinType = 8
[19:42:53:294] : NandFlashInitWithFile ::
[19:42:53:294] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - INIT PARTITION TBL
[19:42:53:294] : Clear
[19:42:53:294] : Clear
[19:42:53:305] : Clear
[19:42:53:305] : Clear
[19:42:53:306] : ¸Ţ˝ĂÁö ş¸łż TYPE_WPARAM_WRITE_TO_SDRAM 3
[19:42:53:306] : m_nSelectedImages= 70787108,Type= 3
[19:42:53:306] : [COM14] ¸Ţ˝ĂÁö ş¸łż TYPE_WPARAM_WRITE_AMSS 15
[19:42:53:306] : [COM14] >>NandFlashInitWithFile(AMSS MODEM HEADER), BinType =14
[19:42:53:306] : NandFlashInitWithFile :: LG3GBinaryList[BinType].szBinaryTypeName = AMSS MODEM HEADER, BinType = 14
[19:42:53:306] : NandFlashInitWithFile ::
[19:42:53:309] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - INIT AMSS MODEM HEADER
[19:42:53:309] : Clear
[19:42:53:309] : Clear
[19:42:53:320] : >> AMSS FLASHING ...
[19:42:53:321] : ¸Ţ˝ĂÁö ş¸łż ProgreassiveBar Init wParam TYPE_WPARAM_PROGRESSIVE_POS=5 lParam(pos)=0 nResult=0
[19:42:53:321] : Sending Pkt Seq : 0
[19:42:53:321] : Clear
[19:42:53:322] : Sending Pkt Seq : 1
[19:42:53:322] : Sending Pkt Seq : 2
[19:42:53:322] : Sending Pkt Seq : 3
NOW IT SENDs TO....
[19:45:36:342] : Sending Pkt Seq : 114437
[19:45:36:342] : Sending Pkt Seq : 114438
[19:45:36:342] : Tx packet : Last packet sequence : 114439
[19:45:36:342] : Sending Pkt Seq : 114439
[19:45:36:364] : _Reset_N_Close bFirst = 1
[19:45:36:364] : ¸Ţ˝ĂÁö ş¸łż TYPE_WPARAM_RESET_THE_PHONE_1ST 8
[19:45:36:364] : [COM14] Reset [DLOAD]
[19:45:36:364] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - RESET
[19:45:36:675] : Clear
[19:45:36:675] : Clear
[19:45:36:675] : 2_DIAG_DLOAD_F DLOAD_RESET_F do not wait for response
[19:45:36:976] : Clear
[19:45:36:976] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - Close Port
[19:45:36:976] : Close Port<<
here's a part of CS_RECOVERY flash:
Code:
[23:30:26:873] : =============================================
[23:30:26:873] : Log is started on 19.04.2011, at 23:30:26:873,
executable: C:\Android\KDZ_FW_UPD.exe (ProcID: 0x00001580),
compile time : Sep 1 2010 21:09:05
[23:30:26:873] : Version :
[23:30:26:873] : strFilename1 = v20
[23:30:26:873] : m_DlMode = 4, m_strBinaryPath = C:\ProgramData\LGMOBILEAX\Phone\v20b.dz, m_nSelectedImages= 70787108
[23:30:34:236] : Start Web Downloading
[23:30:34:236] : Get Usb Port
[23:30:34:267] : rsi.strFriendlyName=Communications Port (COM1)
[23:30:34:267] : Remove Communications Port (COM1)
[23:30:34:267] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM6)
[23:30:34:267] : Remove Standard Serial over Bluetooth link (COM6)
[23:30:34:267] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM7)
[23:30:34:267] : Remove Standard Serial over Bluetooth link (COM7)
[23:30:34:267] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM11)
[23:30:34:267] : Remove Standard Serial over Bluetooth link (COM11)
[23:30:34:267] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM12)
[23:30:34:267] : Remove Standard Serial over Bluetooth link (COM12)
[23:30:34:267] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM54)
[23:30:34:267] : Remove Standard Serial over Bluetooth link (COM54)
[23:30:34:267] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM56)
[23:30:34:267] : Remove Standard Serial over Bluetooth link (COM56)
[23:30:34:267] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM57)
[23:30:34:267] : Remove Standard Serial over Bluetooth link (COM57)
[23:30:34:267] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM53)
[23:30:34:267] : Remove Standard Serial over Bluetooth link (COM53)
[23:30:34:267] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM58)
[23:30:34:267] : Remove Standard Serial over Bluetooth link (COM58)
[23:30:34:267] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM52)
[23:30:34:267] : Remove Standard Serial over Bluetooth link (COM52)
[23:30:34:267] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM4)
[23:30:34:267] : Remove Standard Serial over Bluetooth link (COM4)
[23:30:34:267] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM5)
[23:30:34:267] : Remove Standard Serial over Bluetooth link (COM5)
[23:30:34:267] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM9)
[23:30:34:267] : Remove Standard Serial over Bluetooth link (COM9)
[23:30:34:267] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM10)
[23:30:34:267] : Remove Standard Serial over Bluetooth link (COM10)
[23:30:34:267] : rsi.strFriendlyName=Standard Modem over Bluetooth link #12
[23:30:34:267] : Remove Standard Modem over Bluetooth link #12
[23:30:34:267] : rsi.strFriendlyName=Standard Modem over Bluetooth link #13
[23:30:34:267] : Remove Standard Modem over Bluetooth link #13
[23:30:34:267] : rsi.strFriendlyName=Standard Modem over Bluetooth link #11
[23:30:34:267] : Remove Standard Modem over Bluetooth link #11
[23:30:34:267] : rsi.strFriendlyName=Standard Modem over Bluetooth link
[23:30:34:267] : Remove Standard Modem over Bluetooth link
[23:30:34:267] : rsi.strFriendlyName=Standard Modem over Bluetooth link #2
[23:30:34:267] : Remove Standard Modem over Bluetooth link #2
[23:30:34:267] : rsi.strFriendlyName=LGE Android USB Serial Port (COM14)
[23:30:34:267] : FriendlyNameList[iii].szFriendlyName=LGE Android USB Serial Port
[23:30:34:267] : rsi.strFriendlyName=LGE Android USB GPS NMEA Port (COM13)
[23:30:34:267] : Remove LGE Android USB GPS NMEA Port (COM13)
[23:30:34:267] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 1 - COM14
[23:30:34:267] : Port = COM14
[23:30:34:267] : Clear
[23:30:34:267] : Clear
[23:30:34:283] : >> DIAG_STATUS_F FAILED
[23:30:34:299] : >>Get Model Name [DIAG_VERNO_F]
[23:30:34:299] : Clear
[23:30:34:314] : strModel = GT540
[23:30:34:314] : Read NV item: 71 NV ITEM 71 [71]
[23:30:34:314] : Clear
[23:30:34:330] : CSW
[23:30:34:330] : Banner : CSW
[23:30:34:330] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 0 - GT540
[23:30:34:330] : >>Get Mobile SW [DIAG_EXT_BUILD_ID_F]
[23:30:34:330] : Clear
[23:30:34:345] : GT540-M76XX-V20b-SEP-13-2010-XX
[23:30:34:345] : strFilename = GT540-M76XX-V20b-SEP-13-2010-XX
[23:30:34:345] : strFilename = V20
[23:30:34:345] : Flag_Phone_BIN_Eclair = TRUE
[23:30:34:345] : Clear
[23:30:34:361] : Write NV item:9028 NV ITEM 9028
[23:30:34:361] : 9028 - NV_DONE_S Item
[23:30:34:470] : _DloadMode()
[23:30:34:470] : ¸Ţ˝ĂÁö ş¸łż TYPE_WPARAM_CHANGE_DLOAD 4
[23:30:34:470] : >>Change Offline Mode [DIAG_CONTROL_F/Mode = 1]
[23:30:34:470] : Clear
[23:30:34:486] : >>Change Dload Mode [DIAG_DLOAD_F]
[23:30:34:486] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - DLOAD
[23:30:34:486] : Clear
[23:30:34:486] : 2_DIAG_DLOAD_F DLOAD_RESET_F do not wait for response
[23:30:34:486] : #ifdef FEATURE_L4
[23:30:34:486] : Clear
[23:30:34:486] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - Close Port
[23:30:34:486] : Close Port<<
[23:31:14:490] : Clear
[23:31:14:490] : EMERGENCY Booting Mode
[23:31:14:490] : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[23:31:14:490] : Clear
[23:31:14:490] : Clear
[23:31:14:506] : BS/GT540/7D
[23:31:14:506] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 0 - GT540
[23:31:14:506] : m_pPhoneCtrl->m_pDload->Dl_GetCommMode(&m_pPhoneCtrl->m_pDload->m_nCommMode)
[23:31:14:506] : >> GET DLOAD COMM MODE
[23:31:14:506] : Clear
[23:31:14:506] : Clear
[23:31:14:521] : [GetCommMode] Communication mode : 2
[23:31:14:521] : Pre Nand Download
[23:31:14:521] : >>Set Trusted Mode [DLOAD_NAND_SEC_MODE] sec_mode = 1 (1=trusted 0=NonTrusted)
[23:31:14:521] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - TRUSTED MODE
[23:31:14:521] : Clear
[23:31:14:521] : Clear
[23:31:14:537] : [COM14] >>NandFlashInitWithFile(PARTITION TBL), BinType =8
[23:31:14:537] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - INIT PARTITION TBL
[23:31:14:537] : Clear
[23:31:14:537] : Clear
[23:31:14:552] : Clear
[23:31:14:552] : Clear
[23:31:14:568] : ¸Ţ˝ĂÁö ş¸łż TYPE_WPARAM_WRITE_TO_SDRAM 3
[23:31:14:568] : m_nSelectedImages= 70787108,Type= 3
[23:31:14:568] : [COM14] ¸Ţ˝ĂÁö ş¸łż TYPE_WPARAM_WRITE_AMSS 15
[23:31:14:568] : [COM14] >>NandFlashInitWithFile(AMSS MODEM HEADER), BinType =14
[23:31:14:568] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - INIT AMSS MODEM HEADER
[23:31:14:568] : Clear
[23:31:14:568] : Clear
[23:31:14:584] : >> AMSS FLASHING ...
[23:31:14:584] : ¸Ţ˝ĂÁö ş¸łż ProgreassiveBar Init wParam TYPE_WPARAM_PROGRESSIVE_POS=5 lParam(pos)=0 nResult=0
[23:31:14:584] : Sending Pkt Seq : 0
[23:31:14:584] : Clear
NOW SENDING PKT
.....
[23:31:14:942] : Sending Pkt Seq : 276
[23:31:14:942] : Sending Pkt Seq : 277
[23:31:14:942] : Sending Pkt Seq : 278
[23:31:14:942] : Sending Pkt Seq : 279
.....
[23:33:39:820] : Tx packet : Last packet sequence : 103474
[23:33:39:820] : Sending Pkt Seq : 103474
[23:33:39:851] : Same Version DL BIN & Phone BIN
[23:33:39:851] : _Reset_N_Close bFirst = 1
[23:33:39:851] : ¸Ţ˝ĂÁö ş¸łż TYPE_WPARAM_RESET_THE_PHONE_1ST 8
[23:33:39:851] : [COM14] Reset [DLOAD]
[23:33:39:851] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - RESET
[23:33:40:163] : Clear
[23:33:40:163] : Clear
[23:33:40:163] : 2_DIAG_DLOAD_F DLOAD_RESET_F do not wait for response
[23:33:40:475] : Clear
[23:33:40:475] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - Close Port
[23:33:40:475] : Close Port<<
[23:34:20:478] : Clear
[23:34:20:478] : Clear
[23:34:20:478] : Clear
[23:34:20:493] : Error in DLOAD MODE : Req(12) -> Rsp(19)
[23:34:20:493] : Clear
[23:34:20:509] : Error in DLOAD MODE : Req(12) -> Rsp(19)
[23:34:20:509] : Clear
[23:34:20:525] : Error in DLOAD MODE : Req(12) -> Rsp(19)
[23:34:20:525] : >> DIAG_STATUS_F FAILED
[23:34:20:540] : >>Get Model Name [DIAG_VERNO_F]
[23:34:20:540] : Clear
[23:34:20:556] : strModel = GT540
[23:34:20:556] : Read NV item: 71 NV ITEM 71 [71]
[23:34:20:556] : Clear
[23:34:20:571] : CSW
[23:34:20:571] : Banner : CSW
[23:34:20:571] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 0 - GT540
[23:34:20:571] : Clear
[23:34:20:587] : Write NV item:9028 NV ITEM 9028
[23:34:20:587] : 9028 - NV_DONE_S Item
[23:34:20:587] : Clear
[23:34:20:587] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - Close Port
[23:34:20:587] : Close Port<<
[23:34:20:587] : ¸Ţ˝ĂÁö ş¸łż - TYPE_WPARAM_UPGRADE_OK
[23:34:22:631] : Log finished
now what's this:
[23:34:20:493] : Error in DLOAD MODE : Req(12) -> Rsp(19)
[23:34:20:493] : Clear
[23:34:20:509] : Error in DLOAD MODE : Req(12) -> Rsp(19)
[23:34:20:509] : Clear
[23:34:20:525] : Error in DLOAD MODE : Req(12) -> Rsp(19)

i dunno man. im ready to give up lol. i do appreciate what help i did get in the how to thread but ive been there and tried a ton of it. im lost.

kdm212 said:
i dunno man. im ready to give up lol. i do appreciate what help i did get in the how to thread but ive been there and tried a ton of it. im lost.
Click to expand...
Click to collapse
You still have a hope! Me (Hopefully)
Your problem is you probably wont have Fastboot installed. You need to flash a .KDZ file to activate fastboot and here is how:
(I took this from MoDaCo)
The guide
To install this ROM you need to have fastboot enabled on your phone. If you have Android 1.6/2.1 installed from LG, then fastboot is not enabled. I will explain how to enable fastboot on your phone (this involves re-flashing/replacing your currently installed firmware):
KDZ Updater CarphoneWarehouse Unlocked.zip - A link to a zip archive with all the files needed to flash to Android version 2.1 with fastboot (Carphone Warehouse Unlocked)
KDZ Updater Europe Open.zip - A link to a zip archive with all the files needed to flash toAndroid version 2.1 with fastboot (Europe Open)
Download the version that best applies to you, if you live in the UK, I'd recommend you download the Carphone Warehouse Unlocked version, whereas if you live in Europe, I'd recommend the Europe Open version (simple right? )
I live in the UK and used the open rom from Europe as the Carphone Warehouse rom would not install
Now, how to flash these versions; I'll explain in detail how to flash the ROM's from starting with backing up.
Instructions to install ROM with Fastboot:
2. Extract the .zip file you downloaded to your computer (e.g. your desktop). Open the folder and install MSXML 4.0 SP3 Parser (msxml.msi).
4. Next, open KDZ_FW_UPD.exe
(i) Change 'Type' to '3GQCT' *THIS IS A MUST, THE UPDATE WILL NOT WORK OTHERWISE AND YOU MAY BRICK YOUR PHONE*
(ii) Make sure 'PhoneMode' is set to 'DIAG'
(iii) Browse for the 'V20B_00+Fastboot.kdz' file.
5. Prepare the phone by enabling USB Debugging by going to Settings>Applications>Development>Enable USB Debugging and connect the phone to the computer via USB cable and wait for the drivers to install for the phone.
6. Click 'Launch software update' and do not use your computer until the update is complete. The update will take roughly 10-20 mins to complete.
If you have a problem with this try a different rom, this guide offers two to choose from.
Click to expand...
Click to collapse
How to install Clockwork:
Download Clockwork from here
Download Fastboot.exe from here
Extract Fastboot to your desktop and copy clockwork to the desktop too.
Put your phone in fastboot (camera+power)
Open a command prompt and type
Code:
cd Desktop
fastboot flash recovery recovery_clockwork_2.5.1.8_swift.img
fastboot reboot
Now hold down the Home+Power button and you will be welcomed with clockwork.
Hope it helps,
Jack

ok im gonna give it a go right now! wish me luck...im sure ill need it!
ok status update time.
downloaded and installed everything. then went ahead and used the(other kdz file kept giving me an error) europe kdz file. however after it was dont everything i try to do is giving me the popup error message. cant even get into setting. wasnt that file supposed to wipe the phone?
i do manage to get into some type of fastboot but after i run "fastboot flash recovery recovery_clockwork_2.5.1.8_swift.im" then "reboot fastboot" cdm says "rebooting..." then nothing happens.
tried to do home and power at the same time with the phone powered on and powered off. nothing...
still kinda lost. i do feel that i made some progress with your help but i have a ways to go. more suggestions?

kdm212 said:
ok im gonna give it a go right now! wish me luck...im sure ill need it!
ok status update time.
downloaded and installed everything. then went ahead and used the(other kdz file kept giving me an error) europe kdz file. however after it was dont everything i try to do is giving me the popup error message. cant even get into setting. wasnt that file supposed to wipe the phone?
i do manage to get into some type of fastboot but after i run "fastboot flash recovery recovery_clockwork_2.5.1.8_swift.im" then "reboot fastboot" cdm says "rebooting..." then nothing happens.
tried to do home and power at the same time with the phone powered on and powered off. nothing...
still kinda lost. i do feel that i made some progress with your help but i have a ways to go. more suggestions?
Click to expand...
Click to collapse
Go back into fastboot mode and open a cmd and do "fastboot -w" that should wipe the phone's data.
Hope it helps

JackG256 said:
Go back into fastboot mode and open a cmd and do "fastboot -w" that should wipe the phone's data.
Hope it helps
Click to expand...
Click to collapse
ok so after i kept getting the errors on eveyrthing i touched. i decided to do a hard reset. did that re-ran the kdz file. did the clockwork and fastboot. seems like im at the last stage and cant get recovery up.
also i did do the erase.
more suggestions jack?

kdm212 said:
ok so after i kept getting the errors on eveyrthing i touched. i decided to do a hard reset. did that re-ran the kdz file. did the clockwork and fastboot. seems like im at the last stage and cant get recovery up.
also i did do the erase.
more suggestions jack?
Click to expand...
Click to collapse
Try erasing then re-flashing the recovery partition with a different version. Get 3.0.0.5 here.
Put recovery in the same place as fastboot is and do this in command prompt.
Code:
fastboot erase recovery
fastboot flash recovery recovery_clockwork_3.0.0.5_swift.img
fastboot reboot
Jack

Phone bricked?

Hi All,
I was updating my LG 540GT toswift droid 2.3 from 2.1.While using kdz_fw_upd.exe ,some error occured in between and the process was some what like stuck and not responding.So i exit the program,(meanwhile phone was showing downloading mode).So i unplugged the usb cable and removed the battery to restart it.But after that it is not even switching ON.i tried to go to recovery mode by pressing volume down+camera+power keys,button nothing happened.i tried home+volume up key,the same result.
i tried using Kdz_fw_upd.exe again,its showing "PHONE WAS NOT FOUND" error.I tried all the ways i could.Please help me if i can do anything with it?

Its bricked.
Sent from my GT540 using xda premium

So i cant do anything???

anoopmohamed said:
So i cant do anything???
Click to expand...
Click to collapse
if the phone doesnt turn on at all then u can't
do anything about it..

can the service center rectify it??my warranty expired lst month.i am ready to pay charge. they wiil not replace as the warranty expired.or the phone is unusable permenantly?

anoopmohamed said:
can the service center rectify it??my warranty expired lst month.i am ready to pay charge. they wiil not replace as the warranty expired.or the phone is unusable permenantly?
Click to expand...
Click to collapse
actually u do have little hope!
Follow this, this might unbrick ur phone if u
are lucky!
[HOW-TO] Repair your device if it feels like dead | When you click power button nothing happens (Note that this may or may not work)
Make sure you use USB ports that are in back of youre PC, dont use front ones.
Disable LGE Virtual Modem. In your Windows operating system, go to Control Panel > System > Hardware > Device Manager > Modems > Right click on LGE Virtual Modem and click Disable.
Try to boot your phone into Emergency/Download mode (VOL DOWN + POWER).
If the phone booted into Emergency/Download mode, launch KDZ Updater.
In TYPE dropdown menu, choose EMERGENCY.
Load KDZ(ROM) and flash your phone.
If the phone failed to boot into Emergency/Download mode (VOL DOWN + POWER), launch KDZ Updater.
In TYPE dropdown menu, choose CS_EMERGENCY.
Load KDZ(ROM) and flash your phone.
Thanks to fishears!

Thanks,
i had tried it all earlier :'( bt in vain...
cursing the moment where i thought of upgrading

anoopmohamed said:
Thanks,
i had tried it all earlier :'( bt in vain...
cursing the moment where i thought of upgrading
Click to expand...
Click to collapse
trust me i know how it feels...
the first week i got my phone i stuffed it up by trying
fastboot... then i managed to fix it myself. from then on
i stuffed my phone nearly every single time i tried something...
But i always managed to fix it!
But i guess bad luck 4 u..

Thanks dude..
i think my bootloader is gone if it is switching ON i had hope.bt
I heared something about Riff box jtag which can repair from brick..but i am not sure.
Can the service center fix this issue???

anoopmohamed said:
Thanks dude..
i think my bootloader is gone if it is switching ON i had hope.bt
I heared something about Riff box jtag which can repair from brick..but i am not sure.
Can the service center fix this issue???
Click to expand...
Click to collapse
yeah they can be changing the motherboard!
But i think that will cost more than the phone itself..
If u have warranty just say ur phone doesn't turn on and
they will give u a new one!

Actually the 1 warranty expired by last month(oct). When i purchased it,it came with 1.6,later i upgraded to 2.1 successfully.With this confidence only i planned to upgraded to swift droid 2.3.Do u know what had went wrong??

anoopmohamed said:
Actually the 1 warranty expired by last month(oct). When i purchased it,it came with 1.6,later i upgraded to 2.1 successfully.With this confidence only i planned to upgraded to swift droid 2.3.Do u know what had went wrong??
Click to expand...
Click to collapse
Yeah u took out the USB cable while flashing!
Sent from my GT540 using xda premium

but the program was non responsive and return with some error
[00:15:55:880] : TYPE_WPARAM_UPGRADE_ERROR
[00:15:55:880] : ¸Þ½ÃÁö º¸³¿ - TYPE_WPARAM_UPGRADE_ERROR Error Code = 1002...
so i had exit the program,then only i removed the cable unfortunate..

anoopmohamed said:
but the program was non responsive and return with some error
[00:15:55:880] : TYPE_WPARAM_UPGRADE_ERROR
[00:15:55:880] : ¸Þ½ÃÁö º¸³¿ - TYPE_WPARAM_UPGRADE_ERROR Error Code = 1002...
so i had exit the program,then only i removed the cable unfortunate..
Click to expand...
Click to collapse
I dont know about that ....
Sent from my GT540 using xda premium

the program showed up a windows-message that it does not work anymore ?
or was it just doing nothing ?

1st the program showed windows error(im using vista) asking the close down the program.So i closed and restarted the program and loaded the kdz file and it again started to do the work.but after few seconds it displayed some upgrade error like "WPARAM_UPGRADE_ERROR Error Code = 1002"
the log file is shown below
[00:15:21:945] : =============================================
[00:15:21:945] : Log is started on 26.11.2011, at 00:15:21:945,
executable: C:\Users\anoopmohamed\Desktop\swift droid\KDZ_FW_UPD.exe (ProcID: 0x00001120),
compile time : Sep 8 2010 17:19:53
[00:15:21:945] : Version :
[00:15:21:947] : strFilename1 = eur
[00:15:21:948] : m_DlMode = 4, m_strBinaryPath = C:\ProgramData\LGMOBILEAX\Phone\europen+fastboot.dz, m_nSelectedImages= 70787108
[00:15:46:357] : Start Web Downloading
[00:15:46:357] : Get Usb Port
[00:15:46:436] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM6)
[00:15:46:436] : Remove Standard Serial over Bluetooth link (COM6)
[00:15:46:436] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM8)
[00:15:46:436] : Remove Standard Serial over Bluetooth link (COM8)
[00:15:46:436] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM5)
[00:15:46:436] : Remove Standard Serial over Bluetooth link (COM5)
[00:15:46:436] : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM7)
[00:15:46:436] : Remove Standard Serial over Bluetooth link (COM7)
[00:15:46:436] : rsi.strFriendlyName=Standard Modem over Bluetooth link #2
[00:15:46:436] : Remove Standard Modem over Bluetooth link #2
[00:15:46:436] : rsi.strFriendlyName=Nokia 6300 Bluetooth Modem
[00:15:46:436] : Remove Nokia 6300 Bluetooth Modem
[00:15:46:436] : rsi.strFriendlyName=Agere Systems HDA Modem
[00:15:46:436] : Remove Agere Systems HDA Modem
[00:15:46:436] : rsi.strFriendlyName=RIM Virtual Serial Port v2 (COM29)
[00:15:46:436] : Remove RIM Virtual Serial Port v2 (COM29)
[00:15:46:436] : rsi.strFriendlyName=RIM Virtual Serial Port v2 (COM30)
[00:15:46:436] : Remove RIM Virtual Serial Port v2 (COM30)
[00:15:46:436] : rsi.strFriendlyName=LGE Android Platform USB Serial Port (COM13)
[00:15:46:436] : FriendlyNameList[iii].szFriendlyName=LGE Android Platform USB Serial Port
[00:15:46:436] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 1 - COM13
[00:15:46:436] : Port = COM13
[00:15:46:436] : Clear
[00:15:46:437] : Clear
[00:15:46:438] : UNKNOWN : Req(12) -> Rsp(13)
[00:15:46:438] : Clear
[00:15:46:439] : UNKNOWN : Req(12) -> Rsp(13)
[00:15:46:439] : Clear
[00:15:46:440] : UNKNOWN : Req(12) -> Rsp(13)
[00:15:46:440] : >> DIAG_STATUS_F FAILED
[00:15:46:445] : >>Get Model Name [DIAG_VERNO_F]
[00:15:46:445] : Clear
[00:15:46:446] : BAD CONN MODE : Req(0) -> Rsp(3)
[00:15:46:446] : Clear
[00:15:46:447] : BAD CONN MODE : Req(0) -> Rsp(3)
[00:15:46:447] : Clear
[00:15:46:448] : BAD CONN MODE : Req(0) -> Rsp(3)
[00:15:46:448] : Clear
[00:15:46:449] : BAD CONN MODE : Req(0) -> Rsp(3)
[00:15:46:449] : Clear
[00:15:46:450] : BAD CONN MODE : Req(0) -> Rsp(3)
[00:15:46:450] : Clear
[00:15:46:451] : BAD CONN MODE : Req(0) -> Rsp(3)
[00:15:46:451] : FAIL (No Phone)
[00:15:46:451] : GetModelName() Operation Failed Check Diag CMD
[00:15:46:451] : EMERGENCY Booting Mode
[00:15:46:451] : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[00:15:46:451] : Clear
[00:15:46:451] : Clear
[00:15:46:452] : BS/GT540/7D
[00:15:46:452] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 0 - GT540
[00:15:46:452] : >>Get Mobile SW [DIAG_EXT_BUILD_ID_F]
[00:15:46:452] : Clear
[00:15:46:452] : Clear
[00:15:46:453] : DLOAD_NAK_F reason_msb = 6, reason_lsb = 6
[00:15:46:453] : [ DLOAD ERROR ] : NAK_INVALID_CMD
[00:15:46:453] : Clear
[00:15:46:454] : DLOAD_NAK_F reason_msb = 6, reason_lsb = 6
[00:15:46:454] : [ DLOAD ERROR ] : NAK_INVALID_CMD
[00:15:46:454] : Clear
[00:15:46:455] : DLOAD_NAK_F reason_msb = 6, reason_lsb = 6
[00:15:46:455] : [ DLOAD ERROR ] : NAK_INVALID_CMD
[00:15:46:455] : FAIL
[00:15:46:455] : Phone_Diag_Status = FALSE
[00:15:46:455] : Clear
[00:15:46:455] : Clear
[00:15:46:456] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[00:15:46:456] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[00:15:46:456] : Clear
[00:15:46:457] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[00:15:46:457] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[00:15:46:457] : Clear
[00:15:46:458] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[00:15:46:458] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[00:15:46:458] : NV Write Fail : NV ITEM 9028(9028)
[00:15:46:558] : m_pPhoneCtrl->m_pDload->Dl_GetCommMode(&m_pPhoneCtrl->m_pDload->m_nCommMode)
[00:15:46:558] : >> GET DLOAD COMM MODE
[00:15:46:558] : Clear
[00:15:46:558] : Clear
[00:15:46:559] : [GetCommMode] Communication mode : 2
[00:15:46:559] : Pre Nand Download
[00:15:46:559] : >>Set Trusted Mode [DLOAD_NAND_SEC_MODE] sec_mode = 1 (1=trusted 0=NonTrusted)
[00:15:46:559] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - TRUSTED MODE
[00:15:46:559] : Clear
[00:15:46:559] : Clear
[00:15:46:560] : [COM13] >>NandFlashInitWithFile(PARTITION TBL), BinType =8
[00:15:46:560] : NandFlashInitWithFile :: LG3GBinaryList[BinType].szBinaryTypeName = PARTITION TBL, BinType = 8
[00:15:46:560] : NandFlashInitWithFile ::
[00:15:46:560] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT PARTITION TBL
[00:15:46:560] : Clear
[00:15:46:560] : Clear
[00:15:49:672] : DLOAD_NAK_F reason_msb = 55, reason_lsb = 55
[00:15:49:672] : [ JNAND ERROR ] : ERR_RESERVED_x37
[00:15:49:672] : Clear
[00:15:52:777] : DLOAD_NAK_F reason_msb = 55, reason_lsb = 55
[00:15:52:777] : [ JNAND ERROR ] : ERR_RESERVED_x37
[00:15:52:777] : Clear
[00:15:55:880] : DLOAD_NAK_F reason_msb = 55, reason_lsb = 55
[00:15:55:880] : [ JNAND ERROR ] : ERR_RESERVED_x37
[00:15:55:880] : [COM13] FAIL
[00:15:55:880] : Clear
[00:15:55:880] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - Close Port
[00:15:55:880] : Close Port<<
[00:15:55:880] : TYPE_WPARAM_UPGRADE_ERROR
[00:15:55:880] : ¸Þ½ÃÁö º¸³¿ - TYPE_WPARAM_UPGRADE_ERROR Error Code = 1002
[00:15:55:904] : Log finished
So no process was showing later.I tried a couple of times,same.So i thought of doing it later.Exit the program.But the phone was still in DOWNLOAD MODE,then i pulled out the battery and the usb cable from it.

Numerous things crapped out on my GT540 [Bricked?]

Hi guys
There are numerous things wrong with my phone, but i'll just go though the series of events:
[ Video of attempted boot Search LG GT540 Bootlooping on ytube, first video ]
1: Tried to install a rom that requires bigger partition size [Enigma rom, mikegapinksi's ICS rom etc]
2: found out how to change partition size [Mur4ik's tool] does so.
3: Engima rom fails to install from clockwork mod, tries fastboot but gets the infamous Too Many Links error, still able to write the boot image and recovery image though...
4: Tries to boot device, White LG Logo normally appears, swiftdroid logo briefly appears and then the normal LG flashy bootanimation, but after that, nothing.
5: Trying to write a system image to the phone using the Fastboot commandline reports "flash_write_image: image undersized (128 < 2112) on the device itself, and remote write failure on the PC
KDZ seems to throw various errors, WParam: 100 and Lpara,:1002 etc., sees the device in "scan for phone" though
Fastboot mode and Recovery still work, but booting normally throws normal LG Logo, then swiftdroid briefly, then Flashy LG bootanimation but NO FURTHER
Any help [Reccomended ROMs, procedures etc.] would be VERY much appreciated thanks ^^

Trust me ur phone is not bricked!
Although it is a bit stuffed up, If u can flash fastboot
again using KDZ and everything will be solved!

Just to clarify, do you want to reflash a fastboot image on to my phone?
if so, how would I do that?

Yes just flash fastboot again using KDZ.
Its not an img its a rom..

I can't use bootloop nor download anymore after leaving the battery out, And Hard reset does nothing in either modes. ClockworkMod still boots fine and i've had KDZ pick up the phone form that before...
DAMN!
Upgrade Error
Wparam: 100
LParam: 1002
Log as Follows:
[R&D Test Tools Log File]
17:32:00 : Launching SW update
17:32:00 : Unpacking KDZ
17:32:05 : KDZ file extraced
17:32:09 : Files were extracted.
17:32:09 : LGMobileDL Load.
17:32:09 : Port = -1
17:32:09 : Connecting to phone
17:32:19 : Check Phone mode = 1
17:32:38 : Phone type check.......
17:32:38 : LGMobileDL.DLL Loading....
17:32:38 : _SetAuthMark Ok : wAuthMark(5856)
17:32:38 : _DetachDLL Call
17:32:38 : _DetachDLL Call End
17:32:38 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP500AT-00-V10e-IND-XX-MAR-28-2011+0-DZ.dz
17:32:38 : Param : moduleDir =
17:32:38 : Param : waitTime = 0
17:32:38 : Param : UsbHighSpeed = 1
17:32:38 : Param : PhoneMode = 1
17:32:38 : Param : BinVersion = V10E_00
17:32:38 : Param : AuthMark = 5856
17:32:38 : Call fn_StartUpgrade
17:33:02 : 3GQCT : wParam = 4, lParam = 0
17:33:02 : Step Complete : DLOAD Change
17:33:42 : 3GQCT : wParam = 100, lParam = 1002
17:33:42 : Step : Upgrade Error error code = 1002
17:33:42 : ResetStartInfo() Call
17:33:42 : _DetachDLL Call
17:33:42 : _DetachDLL Call End
17:33:42 : FreeLibrary Call
17:33:42 : FreeLibrary Call End
17:33:42 : ResetStartInfo() Call End
17:33:42 : ===FINISHED===
This is what i meant by KDZ being an A******

I think it died, the power button does ABSOLUTELY nothing, and KDZ doesn't recognize it when I plug it in any more

if u think u've briked ur phone,try this
if u think u've briked ur phone,try this
it may work !!
http://forum.xda-developers.com/showpost.php?p=13205397&postcount=26
or
http://mygt540.com/tuts/faq-my-phone-is-bricked-guide/

my phone cant flash
[R&D Test Tools Log File]
22:18:52 : Launching SW update
22:18:52 : Unpacking KDZ
22:19:01 : KDZ file extraced
22:19:16 : Files were extracted.
22:19:16 : LGMobileDL Load.
22:19:16 : Port = -1
22:19:16 : Connecting to phone
22:19:36 : Check Phone mode = 1
22:19:36 : Phone type check.......
22:19:36 : _DetachDLL Call
22:19:36 : _DetachDLL Call End
22:19:36 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\v20b.dz
22:19:36 : Param : moduleDir =
22:19:36 : Param : waitTime = 0
22:19:36 : Param : UsbHighSpeed = 1
22:19:36 : Param : PhoneMode = 1
22:19:36 : Param : BinVersion = out
22:19:36 : Param : AuthMark = 0
22:19:36 : Call fn_StartUpgrade
:crying:

Dead P705

hi i want to upgrade my phone via KDZ, and after that i got error wParam = 100, lParam = 1010, and updater not responding and i can only close that, after that my phone goes emergency mode, pls help
[R&D Test Tools Log File]
10:32:23 : Launching SW update
10:32:23 : Unpacking KDZ
10:32:31 : KDZ file extraced
10:32:41 : Files were extracted.
10:32:41 : LGMobileDL Load.
10:32:41 : Port = -1
10:32:41 : Connecting to phone
10:32:50 : Check Phone mode = 1
10:33:07 : Phone type check.......
10:33:12 : LGMobileDL.DLL Loading....
10:33:12 : _SetAuthMark Fail
10:33:12 : AuthMark°Ў Б¤И®Ич PhoneїЎ Write µЗБц ѕКѕТЅАґПґЩ!
10:33:12 : _SetAuthMark Fail
10:33:12 : LoadCDMAPhoneData() Error
10:33:12 : _DetachDLL Call
10:33:12 : _DetachDLL Call End
10:33:12 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP700AT-00-V20d-EUR-XX-MAY-02-2013+0.dz
10:33:12 : Param : moduleDir =
10:33:12 : Param : waitTime = 0
10:33:12 : Param : UsbHighSpeed = 1
10:33:12 : Param : PhoneMode = 1
10:33:12 : Param : BinVersion = V20D_00
10:33:12 : Param : AuthMark = 0
10:33:12 : Call fn_StartUpgrade
10:33:12 : Smart : wParam = 206, lParam = 0
i disabled LG modem, enabled windows enableer

vuvkar said:
hi i want to upgrade my phone via KDZ, and after that i got error wParam = 100, lParam = 1010, and updater not responding and i can only close that, after that my phone goes emergency mode, pls help
[R&D Test Tools Log File]
10:32:23 : Launching SW update
10:32:23 : Unpacking KDZ
10:32:31 : KDZ file extraced
10:32:41 : Files were extracted.
10:32:41 : LGMobileDL Load.
10:32:41 : Port = -1
10:32:41 : Connecting to phone
10:32:50 : Check Phone mode = 1
10:33:07 : Phone type check.......
10:33:12 : LGMobileDL.DLL Loading....
10:33:12 : _SetAuthMark Fail
10:33:12 : AuthMark°Ў Б¤И®Ич PhoneїЎ Write µЗБц ѕКѕТЅАґПґЩ!
10:33:12 : _SetAuthMark Fail
10:33:12 : LoadCDMAPhoneData() Error
10:33:12 : _DetachDLL Call
10:33:12 : _DetachDLL Call End
10:33:12 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP700AT-00-V20d-EUR-XX-MAY-02-2013+0.dz
10:33:12 : Param : moduleDir =
10:33:12 : Param : waitTime = 0
10:33:12 : Param : UsbHighSpeed = 1
10:33:12 : Param : PhoneMode = 1
10:33:12 : Param : BinVersion = V20D_00
10:33:12 : Param : AuthMark = 0
10:33:12 : Call fn_StartUpgrade
10:33:12 : Smart : wParam = 206, lParam = 0
i disabled LG modem, enabled windows enableer
Click to expand...
Click to collapse
THIS GUIDE IS FOR UN-BRICKING ALL KNOWN TO ME LG Lx PHONES ON WINDOWS BASED COMPUTERS
(Virtual Machine Will Work )
THIS GUIDE ASSUMES YOU HAVE DRIVERS INSTALLED
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
THIS GUIDE ASSUMES YOU HAVE KDZ UPDATE PROGRAM
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
THIS GUIDE ASSUMES YOU HAVE .kdz FIRMWARE DOWNLOADED
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<​
1. Plug USB cable to PC
2. Take battery out of phone
3. Press and hold VOL- button
4. Plug USB cable to phone
5. Wait few seconds ... (it should display "Download Mode" on black screen)
6. Put battery back in phone
7. UPDATE YOUR KDZ NOW
8. navigate to phone settings and security and preform wipe/master reset (not obligatory but ensures "clean rom" )
​
Enjoy your NEW OLD phone