Related
hello i have an hd2 tmobile branded i cannot seem to hspl it because on 1024 i get usb conectiong failed but it does go on tri color screen and in hspl2 i get bad model id.
this is what i have on my tricolor:
PB81120 SS-B3
SPL-20.8.0000 8G XE
MICROP LED 0X05
MICROP TOUCH 0X40
PLEASE HELP =/
THANKS IN ADVANCE.
this is what you need my friend..
then you will be able to download the tmobile energy rom
http://rapidshare.com/files/368532303/HSPL2_1024_RUN.zip
HI,
I used the HSPL2_1024, selected the 2.0.0.8
After 10 min, of using Energy.Leo.23549.Sense2.5_TMobile_USA.Mar.26
I got an error, I recovered, but wondering what happened??
Just try it again. Make sure your drivers are all complete from Windows Vista or 7. Make sure you are running 6.1 Windows Mobile Device Center.
I am sure you have done this but make sure:
Plug in your phone make sure the drivers are good with Active Sync on.
When you get into HSPL2_1024 and let it run your device will be found again in USB mode. Just to make sure the drivers are loaded correctly.
Flash - reboot and then flash the Energy or whatever USTMO compatible cooked ROM you like. I think there are only 2/3 that work with the ROM 2.08
Sometimes it just takes retracing your steps to get it to work right.
good luck.
I didn't want to make a new thread for this and clutter up the board, I'm kind of a noob to XDA you see. I just bought a Tmobile HD2 and downloaded and applied the HSPL linked in this thread, it all worked fine. My problem is: Will installing the 2.09.51.03 radio on my tmous HD2 hurt it? Was the 2.09 radio meant for the htc hd2 which has a different radio?
My main goal is to get Artemis rom on it.
Thanks for your time.
Lazarpandar said:
I didn't want to make a new thread for this and clutter up the board, I'm kind of a noob to XDA you see. I just bought a Tmobile HD2 and downloaded and applied the HSPL linked in this thread, it all worked fine. My problem is: Will installing the 2.09.51.03 radio on my tmous HD2 hurt it? Was the 2.09 radio meant for the htc hd2 which has a different radio?
My main goal is to get Artemis rom on it.
Thanks for your time.
Click to expand...
Click to collapse
The .51 radios are meant for the European spec and will not work on a TMOUS based rom AFAIK.
yeah i have installed mobile center twice straight from microsoft, my phone is synced with it, i run the 1024 it says connecting 5 min later says usb connection failed my phone does go into the tri color screen with the USB at the bottom =/ please really help
S3BAZ10 said:
yeah i have installed mobile center twice straight from microsoft, my phone is synced with it, i run the 1024 it says connecting 5 min later says usb connection failed my phone does go into the tri color screen with the USB at the bottom =/ please really help
Click to expand...
Click to collapse
try different usb ports and remember to right click 1024 and 'run as administrator'
After using the HardSPL I could not get my phone to sync either... So Just put your phone into bootloader mode. Turn off phone, power button, volume down hold till tri color screen comes up. Then just run the RUU an it will flash your phone. Only NRGZ rom works.
richsark said:
HI,
I used the HSPL2_1024, selected the 2.0.0.8
After 10 min, of using Energy.Leo.23549.Sense2.5_TMobile_USA.Mar.26
I got an error, I recovered, but wondering what happened??
Click to expand...
Click to collapse
You have to choose. 2.0.0.8 HSPL
msmith1991 said:
this is what you need my friend..
then you will be able to download the tmobile energy rom
http://rapidshare.com/files/368532303/HSPL2_1024_RUN.zip
Click to expand...
Click to collapse
Would anyone happen to have a mirror to this link, or could some kind soul possibly upload it? This one seems to be broken. It would be greatly appreciated.
Update...I found it.
yeah notinh still not working ive tryed all ports, im running windows 7 64bit.
I'm recieving the same error. Windows 7 x64, MDC is latest 6.1. Tried from both laptop (Win7 x64) and desktop (Win7 x64). Phone goes into Tri color screen, says "USB" at the bottom. Windows notes new driver, updates, then HSPL2 for 1024 Leo gives "Critical Error" and bombs out. Bummer
UPDATE: Fixed it. Did a hard reset on the phone, tried again, and now HSPL flashed successfully. Now, on to the cooked ROMs
Worked for me on win 7 x64... No issue with HSPL2_1024_RUN file I got by browsing this site... It did freeze on me during RUU, but I just rebooted and ran it as admin whilst not touching any other program in windows until it was done and it worked.
zoth said:
You have to choose. 2.0.0.8 HSPL
Click to expand...
Click to collapse
I believe you are to choose 2.08 to install HSPL
And you choose 2.08.0000 when you want to uninstall HSPL, for warranty and such.
well i had done a hardreset before but nothing, i tryed it on my laptop and it worked fine, guess it was my PC =/, thanks anyways to all you who tryed to help.
S3BAZ10 said:
well i had done a hardreset before but nothing, i tryed it on my laptop and it worked fine, guess it was my PC =/, thanks anyways to all you who tryed to help.
Click to expand...
Click to collapse
Please change the Thread title by adding {Solved} or something like that to note that your issue has been resolved.
hi guys, I tried all of hspl2 (1024) version for TMO US htc HD2 but it does not work at all. Pls help me.
Critical error is showed up by hspl2
My Phone softare information;
OS 5.2.xxxx
Manila 2.5.xxxxx
Rom v 2.10.xxxx(82076) WWE
Radio 2.08.xxxxx
I still use stock rom which is TMO US's shipping rom
I checked whole Hspl2 (1024) but doent work, Pls help me,
Moved you over to General. HSPL questions should have been posted in the hspl thread already open buddy.
Peace,
Josh
ok. I'll do it. thank you
had this not so great idea last night that I would flash my nand android ROM for my HTC HD2 on Tmobile UK, by formatting the SD card then reinstalling CWD and flashing the ROM...
Unfortunately my fone will not switch on, I can get it into bootloader but do not know what to do from here...
any ideas?
I think I need to reinstall magdlr 1.3, then clockwork mod then my nand android rom, can anyone confirm this is right?
please help
ta
whilst I can get into bootloader and it says USB , my PC will not let me access the SD card, nothing happens at all like when the Open folder pop up appears, well it doesnt....
what have I done??
Is the HSPL 3 already installed on the phone?
http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893
You need to take your sd card out of your phone and use a card reader. There is a problem with Magdlr usb so that would be the only way to copy things to and from the sd card.
I would do a task29, reinstall magldr, clockwork and then go into clockwork and install.
Hope this helps.
bodyman
I have HPSL 2.08 do I need HPSL 3.0??
Sure I have a card reader
But its erm, well formatted now to FAT32...
Whats task29??
How can I reinstall MAGDLR when the phone will only go into bootloader but my PC will not open the sd folder?
thanks
xirokx said:
I have HPSL 2.08 do I need HPSL 3.0??
Sure I have a card reader
But its erm, well formatted now to FAT32...
Whats task29??
How can I reinstall MAGDLR when the phone will only go into bootloader but my PC will not open the sd folder?
thanks
Click to expand...
Click to collapse
quick seaches found this:
Task29
and you need to be in the bootloader to install magldr -- you use RUU to install that. Then once into madldr, then you can install clockwork -- that uses DAF.
Also, you should upgrade to 3.0.
Hope this helps
Please go read some n00b guides, everything you asked about here is VERY cleary documented, There is absolutley no need at all for this type of topic.
Not trying to be an arse but its just really annoying seeing the forums flooded with these types of topics daily and its because people dont follow simple logic and look at stickies or guide topics prior to jumping in.
trouble is when I connect my phone via usb to PC in order to update to HARDSPL3 nothing happens...
Its like my phone just will not sync with my pc
Even if I get the phone to bootloader mode, where it first says serial, when I connect the fone it does say USB but nothing else happens...
Where are these guides? why are they so hidden...
I dont know if my fone is bricked...please help
If I where you, I would start from scatch.
Go to bootloader when it says USB flash stock WM6.5
Flash HSPL 2.08
Flash MAGLDR
and so and so...
Same problem here with my boys phone. Only thing is, I can't flash anything and wmdc won't recognize the hd2. I feel like an ars lol. Just go buy an android phone and leave winmo in the dust ;-P You might enjoy unloading on it with an ar15 though muahaha
Sent from my HTC Glacier using XDA App
Try using different UBS port or UBS cord and make sure when in bootload your pc show a driver connecting with it or it won't work. And if your on window Vista or 7 try right clicking and run as admin
Also do not have your SD card in while doing this
Sent from my HTC Desire using XDA App
heres an update:
I installed HARDSPL 3.0
The phone then restarted and is working however I now need to install TASK29
But from lets call it my nand ROM main screen one it has loaded, when I connect attach a USB cable the phone will not sync will windows mobile device centre so I unable to perform TASK29
How can I get around this?
Its great the phone is working again however all I am confident after I manage to run TASK29 it will be clean so that I can install another NAND rom on to it...
Just desperately need my pc OS windows 7 to now recognise my phone so TASK 29 will work, but how?
thanks guys for your help
the plot thickens....
I went into booloader and it still shows SPL2.08 when I downloaded and installed HARDSPL3??? This is the filename I downloaded and installed HSPL3_PKG
Also after removing SD card, the phone boots into MAGDLR v1.13 and then keeps looping into reboot...
On a different note, this time when I phone switched on with USB attached but without SD CARD, my pc OS windows 7 installed a driver and it sees it but now I cannot get into the main ROM screen to run TASK29....
Gonna put the SD Card back in and hope it gets me there that way..will report back in 2 mins..
thanks for your help
so i reinstalled magldr 1.13 and clockworkmod but now when I am in magldr and go to boot ad sd I get the following error message:
load zImage
k: zimage
SD KERNAL OPEN FAILED
it cannot find clockwork mod is that right?
where do i go from here?
thanks for your help
all fixed thanks for your input especially connecting to usb ports this one thing helped me resolve everything
there should be a sticky will all info easily accessible what to do when this happens..
thanks
p.s. if anyone can tell me why my bootloader still shows hardspl 2.08 when I upgraded to 3.0 i would be grateful
thanks guys
xirokx said:
all fixed thanks for your input especially connecting to usb ports this one thing helped me resolve everything
there should be a sticky will all info easily accessible what to do when this happens..
thanks
p.s. if anyone can tell me why my bootloader still shows hardspl 2.08 when I upgraded to 3.0 i would be grateful
thanks guys
Click to expand...
Click to collapse
3.0 is just an update to 2.08 that works for the newer hd2's
also, task29 will format your NAND -- it is like the ultimate hard reset. I use it when I switch from different roms. That way there is no residuals left over from any previous roms that may or may not cause problems.
check here for any ?'s that you might have. All stickies have been rolled up into one thread.
Well i noticed that task29 doesn't wipe everyhing. I had issues with various rome for a while, I tried task29 many times with no success, the only thing that solved theme where flashing stock 6.5...
And don't go to spl3 or you won't be able to flash magldr, stay on 2.08
xirokx said:
all fixed thanks for your input especially connecting to usb ports this one thing helped me resolve everything
there should be a sticky will all info easily accessible what to do when this happens..
thanks guys
Click to expand...
Click to collapse
Is this a joke? i mean, the stickies are there, you only need to read them and follow the steps you have tutorials and howtos in task29 thread, then in the hardspl thread and in the hd2 sections (sd,nand).
anyway, i am glad, you worked it out
Hi all,
I'm brand new in the art of updating mobiles.
I would like to update my HD2 to andriod but have no idea of how I do it. I have looked at a lot of threads but it seems that I need ot know a lot about my phone before I can start!!
Can anyone help me how and where to start?! What do I need to install and how do I install it :/
My phone data:
OS version 5.2.2.1913 (21913.5.0.94)
Manila version 2.5.20181527.0
ROM version 3.14.403.2 (04666) DAN
ROM date 10/4/10
Radio version 2.15.50.14
Protocol version 15.42.50.11.U
When I press volume down and start my phone it say
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Best regards,
Peter
Knowledge is power my friend and d answers u seek are but a click away...All u have 2 do is read, read n do more reading...follow all instructions written by devs to d letter as they were written for a reason...Wat reason?...
Avoiding errors or turning your beloved HD2 into an "Expensive Paper-Weight"....Getting android onto ur device is quite easy, u just have 2 put in d time 2 understand certain terms n how d needed softwares work...So summary?...Start reading from here. When u have properly familiarized urself with flashing then visit the HD2 android development section n check out several builds available...u must make a choice urself as we wouldn't know wat u lyk...so feel free 2 test as many as u can.
P.S. Its crucial u first perform a HSPL (2.08 HSPL) on ur fone before doing ANYTHING else.
The post above isn't really helpful. He's obviously read a lot already lol.
I know getting in to flashing and stuff on the HD2 is very confusing at the start, but once you learn it once you learn it forever.
Basically first off, you need to flash HSPL 2.08 to your phone. To do so download 'HSPL4' from these forums and flash that. Just search for it and you'll find it. It'll have instructions on how to install it on the thread which is very easy.
Just boot to SPL and connect to USB and run the .exe file inside of HSPL4 and choose 2.08.HSPL from the drop down menu.
After this you need to flash the newest radio which is 2.15.50.14. There's a sticky in all the HD2 development threads that have all the radio's. Just look in the WinMo or Android section and it'll be stickied. You basically then open the file you downloaded with the radio in it, boot to HSPL (you've just flashed HSPL over SPL) and run the RomUpdateUtility and just click on all the next and update buttons on the window that'll pop up and it will install. Obviously you need your USB cable plugged in for this too.
After that, you need to flash MAGLDR. I can't get links at the moment but you should easily be able to get a link to the MAGLDR thread and download it. After you've downloaded it to your PC, it's basically the exact same procedure as flashing a radio. Bootloader > USB connected to phone > open RomUpdateUtilty and follow instructions and flash. After this finishes installing you're basically done and all you need to do is flash your Android ROM. Just go in to the NAND Development section and chose a ROM to start from.
Another option is to flash Clockworkmod Recovery after MAGLDR.
You simply flash that by going in to MAGLDR (keep holding power/end key while phone is booting) and go to USB Flasher using your volume buttons then going in to it by the call button. Then opening the .DAF file on your PC and following the instructions and clicking next. Obviously again with your USB cable plugged in too. This is how you flash ROM's/Clockwork.
Any other problems I'd be more than happy to help with.
Just to mention too - the HD2 is very difficult to brick so don't worry about bricking your phone as I don't think there's actually a way to do it other than flashing the wrong radio if you have a TMoUS HD2 and you flash a .51 radio which you won't do as I've told you the correct radio to flash.
from the info he posted about his phone, it seems it already has the latest radio installed (2.15.50.14) I'm guessing that he's got a phone from somewhere in EU since the TMOUS came with the 2.08.50 radio, unless I'm mistaken, and there are some later models of the US hd2 that have the 2.15 radio, but anyways if the info is correct then he doesn't need to worry about the radio, he needs :
HSPL4> 2.08hspl http://forum.xda-developers.com/showpost.php?p=11499585&postcount=3
Task 29 http://forum.xda-developers.com/showthread.php?t=644781
MGLDR http://forum.xda-developers.com/showthread.php?t=893618
Clockworkmod Recovery http://forum.xda-developers.com/showthread.php?t=898913
any more info go here http://forum.xda-developers.com/showthread.php?t=905841
and his rom of choice. I'm sure with this info he can get to where he wants to go, good luck!
Woops my bad, didn't even read the OP info part. Well done for posting the links though as I can't at the moment.
Also about clockwork, make sure the you have the right clockwork partition for the ROM or else you'll get stuck on a boot-loop. You'll usually find the partition info in the ROM thread and then you just edit the flash.cfg file found in your clockwork folder using notepad.
Hi
Thanks a lot for all your help, it made it a lot easier for me to start )
I have now installed
HSPL4> 2.08hspl http://forum.xda-developers.com/show...85&postcount=3
I didnt do this (radio update, since as I understood I already had the right one!!??, Yes the phone is from Denmark)
Task 29 http://forum.xda-developers.com/showthread.php?t=644781
Then I downloaded MGLDR and run the ROMUpdateUtility
MGLDR http://forum.xda-developers.com/showthread.php?t=893618
BUT it say that it may take upto 10 minutes, it take below 1 minute for me... the statusbar at the host computer goes from 0 to 100% fast and the same on the phone and after that the phone restart and show "HTC" in green with white background... then it simply stops.......
What have I done wrong and how can I solve it?!
Thanks in advance for all your input.
Best regards,
Peter
PeterSvendsen said:
Hi
Thanks a lot for all your help, it made it a lot easier for me to start )
I have now installed
HSPL4> 2.08hspl http://forum.xda-developers.com/show...85&postcount=3
I didnt do this (radio update, since as I understood I already had the right one!!??, Yes the phone is from Denmark)
Task 29 http://forum.xda-developers.com/showthread.php?t=644781
Then I downloaded MGLDR and run the ROMUpdateUtility
MGLDR http://forum.xda-developers.com/showthread.php?t=893618
BUT it say that it may take upto 10 minutes, it take below 1 minute for me... the statusbar at the host computer goes from 0 to 100% fast and the same on the phone and after that the phone restart and show "HTC" in green with white background... then it simply stops.......
What have I done wrong and how can I solve it?!
Thanks in advance for all your input.
Best regards,
Peter
Click to expand...
Click to collapse
Sometime wrong radio can cause that issue.
Make sure that the radio is 2.15.xxx.xxx.
Now, you should go into bootloader and try to flash the radio, and then restart doing task 29, flashing MAGLDR.
If you succeed, your phone will automatically bring you into MAGLDR screen.
From there you can flash Android or WP7
Good luck
I now downloaded my "old" radio version 2.15.50.14
http://forum.xda-developers.com/showthread.php?t=611787
It seems to complete.. didnt jump from 0% to 100% in 1 sec..... so thats good
Then the task29 seems to work as well since my ROM is clean!!
BUT agian when I romupdate MGLDR it start and complete very fast... goes from 0 to 100% within a few sec...
http://forum.xda-developers.com/showthread.php?t=893618
and agian stops at the HTC startup screen.....
As extra information I can say that when I try to install MGLDR the RomUpdate state that the current image version is... blank
and that I can install Image Version 2.00.000.0
And then when I start it takes a few sec.....
What OS do you use on your PC? If it's Vista/Windows 7, you may need to run as administrator, if you haven't done so already
Sent from my HTC HD2 using XDA App
I'm using WinXP as OS
I'm using WindowsXP as OS.
I have not had any problem using the programs so far.. so I guess I have all the right rights!
UPDATE:
Can it be a problem with the SD card if there are no connection or a defect card?
I get exactly the same behavior if I remove the SD card from the phone!
PeterSvendsen said:
I'm using WindowsXP as OS.
I have not had any problem using the programs so far.. so I guess I have all the right rights!
UPDATE:
Can it be a problem with the SD card if there are no connection or a defect card?
I get exactly the same behavior if I remove the SD card from the phone!
Click to expand...
Click to collapse
Hmmm...You r flashing MAGLDR 1.13? Try flashing witout ur sd card & sim card present...if dat still doesn't work then try another pc, possibly one with Windows 7 (though it works on xp)...Task 29 always.
so today i tried to boot-up my phone but its didnt boot,
Its only show a white screen (of death i guess)
I abled to get into the bootloader (RGB screen)
But when i try to flash the stock wm6.5 htc rom its dont work
I tried to flash from the computer and its just stuck on 0%
I also tried flash from the sd card but its stop after like 20% (and mark in red the radio)
Please please i need help...my phone is dead....Thank you
The hd2 was on android rom
EDIT:
This is exactly the problem i have:
http://www.youtube.com/watch?v=QS02ySr2Kic
Have you got the hd2 nand toolkit?
If not get it and try installing the radio for your device ,make sure it is the correct one for your device go here to get it
http://forum.xda-developers.com/showthread.php?t=611787
You can then use the toolkit to install android again. follow the tutorials, of which there are many on xda, here's one..
http://forum.xda-developers.com/showthread.php?t=1402975
shanman-2 said:
Have you got the hd2 nand toolkit?
If not get it and try installing the radio for your device ,make sure it is the correct one for your device go here to get it
http://forum.xda-developers.com/showthread.php?t=611787
You can then use the toolkit to install android again. follow the tutorials, of which there are many on xda, here's one..
http://forum.xda-developers.com/showthread.php?t=1402975
Click to expand...
Click to collapse
How can i know which radio i need?
Here's another link
http://forum.xda-developers.com/showthread.php?t=1021837
read especially bottom of post 3
Edit: don't forget to thank the author..
shanman-2 said:
Here's another link
http://forum.xda-developers.com/showthread.php?t=1021837
read especially bottom of post 3
Edit: don't forget to thank the author..
Click to expand...
Click to collapse
Thanks a lot men but i still don't understand which radio i need to flash...
I don't have a T-MOBILE HD2 ,mine is probably from Europe (512 MB ram)
The S/N: HT01MNW041** , hope its can help
This one is safe for both..
http://www.multiupload.com/QP0IWGY42F
shanman-2 said:
This one is safe for both..
http://www.multiupload.com/QP0IWGY42F
Click to expand...
Click to collapse
Thank u men....but i cant figure how to install the radio throw the toolkit
i am afraid to do something wrong
Edit:
I figure the way to flash but its still stock on 0% and give me an error 262.... :-(
Any suggestions?
"freezer trick"
search for it!
OK. Your problem has nothing to do with the radio ver.
Error 262 could be a communication problem, when you are in the bootloader screen with cable plugged in does the word "serial" on the fone change to "USB"?
And what does it say at the top of the screen, spl. etc ?
shanman-2 said:
OK. Your problem has nothing to do with the radio ver.
Error 262 could be a communication problem, when you are in the bootloader screen with cable plugged in does the word "serial" on the fone change to "USB"?
And what does it say at the top of the screen, spl. etc ?
Click to expand...
Click to collapse
yes...it changed to "USB"
and it say SPL-2.08. HSPL 8G XE
BTW , this is exactly the problem i have:
http://www.youtube.com/watch?v=QS02ySr2Kic
try a task29 using the toolkit if you succeed decide on msgldr (allows you to dual boot) or cLK 1.5 for androidfollow one of the guides in the links I posted..
hope it works.
shanman-2 said:
try a task29 using the toolkit if you succeed decide on msgldr (allows you to dual boot) or cLK 1.5 for androidfollow one of the guides in the links I posted..
hope it works.
Click to expand...
Click to collapse
task29 give me 270 error....i really don't know what to do anymore...
give up ?
****!
get cLK 1.5 on your sd card and follow the instructions in the post I gave you.
After that I don't know.
Nothing seems to work...i am still getting error 270
I am sure there is solution i just cant figure it out...
Anybody?
Hi i have a htc hd2. when i power the phone up it stays on the htc screen and doesnt go an further. Please help
Thanks
hi! have you installed HSPL 2.08 and an os different form WM 6.5 or you have the stock rom?
lukes91 said:
hi! have you installed HSPL 2.08 and an os different form WM 6.5 or you have the stock rom?
Click to expand...
Click to collapse
hi im new to all this and i dont have a clue what you mean please can you explain
ok, don't worry, I'm here to try to help
so, let's start from the very beginning: HD2 comes with Windows Mobile 6.5, but there are several procedures and guides to flash different operative sistems like android... to help you, i need to know if your device is still running Windows Mobile or if you ever flashed a different os after installing HSPL, a bootloader and a custom recovery; if you don't understand what I'm talking about, i suggest you to read a guide like this one
lukes91 said:
ok, don't worry, I'm here to try to help
so, let's start from the very beginning: HD2 comes with Windows Mobile 6.5, but there are several procedures and guides to flash different operative sistems like android... to help you, i need to know if your device is still running Windows Mobile or if you ever flashed a different os after installing HSPL, a bootloader and a custom recovery; if you don't understand what I'm talking about, i suggest you to read a guide like this one
Click to expand...
Click to collapse
When i put the phone in boot mode (4 colours screen) it says 2.08 HSPL. Does this mean that there is HSPL installed?
I have also read another thread and it says you need to update the radio. Should i do that?
ok, if it says HSPL 2.08 by Cotulla it'r rooted, so you can try to perform a Task29 and to install again bootloader, recovery and rom, it should work!
which radio have you installed? if you have 2.15.50.14 and you have EUR HD2, it's fine as it's the best radio to install custom roms: it should see the biggest amount of ram available...
tell me if it helped, otherwhise I'm here
lukes91 said:
ok, if it says HSPL 2.08 by Cotulla it'r rooted, so you can try to perform a Task29 and to install again bootloader, recovery and rom, it should work!
which radio have you installed? if you have 2.15.50.14 and you have EUR HD2, it's fine as it's the best radio to install custom roms: it should see the biggest amount of ram available...
tell me if it helped, otherwhise I'm here
Click to expand...
Click to collapse
Hi thanks for all your help but I followed a guide on YouTube and it fixed it
Thanks for all your help
ok, the most important thing is that you can play again with your device
good afternoon!
habeeb2797 said:
Hi thanks for all your help but I followed a guide on YouTube and it fixed it
Thanks for all your help
Click to expand...
Click to collapse
Can you help me? My HD2 is also suspended htc screen.thanks
habeeb2797 said:
Hi i have a htc hd2. when i power the phone up it stays on the htc screen and doesnt go an further. Please help
Thanks
Click to expand...
Click to collapse
help me..........please.................
hoangmit said:
help me..........please.................
Click to expand...
Click to collapse
hi! can you provided me the infos i asked in previous posts? maybe i can help you
HD2 FAILED BOOT And FLASH ATTEMPTS
hey good day
im quite familiar with flashing roms and all that jazz
the last rom i had on my hd2 was a wp7.8 rom
one day i woke up it was stuck on magldr title screen
the menu didnt and couldnt come up
so i bit my tongue and returned to stock in efforts to reflash from scrach ...
now it stuck at the HTC logo , nothing i do gets it to work again
it boots to the bootloader mode it will accept flashing of anykind but it wont boot pass HTC , i even tried to manuall remove the HSPL and task 29 a million times , to no avail
help !!!
PS . it wont load a rom via SD
hi
I have a similar problem. I had android installed on SD, with multi-boot WM6.5. One day, the device went blank. I tried many ways and the farthest I got to was to have the original stock rom reloaded from SD (leoimg) and it stuck half way with no touch screen response to the input tests. I tried hard reset and install another rom and it went completely blank again. I could boot into tricolor but it displayed errors during the course of flashing any rom. I have HPSL 2.08 installed but not mgldr. Recovery was installed on SD.
In short, I am stuck at tricolor and unable to go any further. Cannot even install mgldr now.
Help please!
WS
lukes91 said:
ok, don't worry, I'm here to try to help
so, let's start from the very beginning: HD2 comes with Windows Mobile 6.5, but there are several procedures and guides to flash different operative sistems like android... to help you, i need to know if your device is still running Windows Mobile or if you ever flashed a different os after installing HSPL, a bootloader and a custom recovery; if you don't understand what I'm talking about, i suggest you to read a guide like this one
Click to expand...
Click to collapse
Hi... I have the same problem after i tried to install android on it.
And in boot mode (4 colors) it apears:
"PB1100 HX-BC
SPL-3.03.HSPL XE
0x05
CotullaHSPL 0x40 "
Please help me... I would like to instal on it Windows or Android.