Related
Whenever I try flashing a Windows Phone 7 rom to my HD2, i always get an error when it is about 3/4 of the way through flashing 4 partition. This is the error
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: flash write failed.
Info: .\RSPL\RSPL.cpp (710)
I tried it with both MAGLDR v1.12 and 1.13 and switched SD cards multiple times. I tried switching computers as well as cords. I even tried flashing and older version of LEO70 that I am positive worked months ago. Any ideas? Thanks!
Hi
WHat have you done so far and what have you come from?
I assume youve, hdpsl, radio, magldr then attempt to flash the rom?
What size cards have you tried?
Well I've flashed multiple MAGLDRs, i have a 2gb Micro SD card that works and a 16gb card that I believe is corrupted, but i'm getting the same result from both cards so I don't know if the issue is the MicroSD card.
I'm pretty sure i have the correct HSPL and radio because I flashed the original LEO70 rom way back in January and haven't really modified anything since then. I did load Android on the NAND, but I should think flashing the same exact LEO70 rom with the same laptop should work? So I don't think the HSPL or radio are the issues either.
Thanks for the quick response!
did you reformat your card before flashing wp7?
I'm trying that now... I just flashed a WMO 6.5 ROM and it works perfectly. My computer recognized the 200mb partition on both the cards but is having a hard time formatting the 16gb card (which is most likely corrupted). Is a 2gb SD card enough for WP7?
knollster said:
I'm trying that now... I just flashed a WMO 6.5 ROM and it works perfectly. My computer recognized the 200mb partition on both the cards but is having a hard time formatting the 16gb card (which is most likely corrupted). Is a 2gb SD card enough for WP7?
Click to expand...
Click to collapse
Yh it is barely, i had an old class 4 one, but it was pretty slow.
It would tell you its the card though, although i suspect it is the partition that is the problem.
It worked!
Formatting the SD card worked! I went on the SD card website and downloaded a designated SDFormatter to fix the 16gb card, and thats what i'm using in it now. Thanks for the help!
knollster said:
Formatting the SD card worked! I went on the SD card website and downloaded a designated SDFormatter to fix the 16gb card, and thats what i'm using in it now. Thanks for the help!
Click to expand...
Click to collapse
No probs
help please
knollster said:
Whenever I try flashing a Windows Phone 7 rom to my HD2, i always get an error when it is about 3/4 of the way through flashing 4 partition. This is the error
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: flash write failed.
Info: .\RSPL\RSPL.cpp (710)
I tried it with both MAGLDR v1.12 and 1.13 and switched SD cards multiple times. I tried switching computers as well as cords. I even tried flashing and older version of LEO70 that I am positive worked months ago. Any ideas? Thanks!
Click to expand...
Click to collapse
hello, I have the the same problem. I have a original rom from htc, Hard SPL 2.08, Magldr 1.13, and already experimented with two different SD cards, format always the sd card before trying to flash the phone.
but the result is always the same
someone can help?
FilSex said:
hello, I have the the same problem. I have a original rom from htc, Hard SPL 2.08, Magldr 1.13, and already experimented with two different SD cards, format always the sd card before trying to flash the phone.
but the result is always the same
someone can help?
Click to expand...
Click to collapse
Hello, is your system win vista? Make sure that you are in Admin mode.
knollster said:
Whenever I try flashing a Windows Phone 7 rom to my HD2, i always get an error when it is about 3/4 of the way through flashing 4 partition. This is the error
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: flash write failed.
Info: .\RSPL\RSPL.cpp (710)
I tried it with both MAGLDR v1.12 and 1.13 and switched SD cards multiple times. I tried switching computers as well as cords. I even tried flashing and older version of LEO70 that I am positive worked months ago. Any ideas? Thanks!
Click to expand...
Click to collapse
Received my micro sd card through post today, so tried flashing a wp7.5 rom.
I get the same issue, and when the rom actually boots up it says sd card missing.
Now it's definately not the micro sd cards fault as before flashing the rom I formatted it, and it's absolutely new, class 4 4gb.
I've got the right version of radio and hspl..
What've I done wrong? I've tried flashing both HD2O© v2.00b5 WP7 TANGO 8773 and HD2 Pdaimatejam Rom Wp7.5 Tango 7.10.8773.98 v7.9
Can someone tell me what i'm doing wrong? Because I've had a fully functioning android 2.3.7 cm 7.2 rom on the device and that ran faultlessly.
Regards,
Edit: I did 10. Services, 4. UseLast24NAND
* 10. Services, 5. ClearSD MDR
and it's now working!
pethd2 said:
Hello, is your system win vista? Make sure that you are in Admin mode.
Click to expand...
Click to collapse
thanks for the fast reply. no my system is win 7, and I run as admin.
FilSex said:
thanks for the fast reply. no my system is win 7, and I run as admin.
Click to expand...
Click to collapse
Hi mate try doing this on MAGLDR, go to Services, then click option 4. UseLast24NAND press yes
Then click on option 10 again, Services then option 5. ClearSD MDR.
After doing both those steps go onto usbflasher and flash the rom you wish.
Worked a charm for me.
Regards,
Tenpin said:
Hi mate try doing this on MAGLDR, go to Services, then click option 4. UseLast24NAND press yes
Then click on option 10 again, Services then option 5. ClearSD MDR.
After doing both those steps go onto usbflasher and flash the rom you wish.
Worked a charm for me.
Regards,
Click to expand...
Click to collapse
and also check/reinstall WMDC if have any problems with usb drivers and recognizing HD2
Tenpin said:
Hi mate try doing this on MAGLDR, go to Services, then click option 4. UseLast24NAND press yes
Then click on option 10 again, Services then option 5. ClearSD MDR.
After doing both those steps go onto usbflasher and flash the rom you wish.
Worked a charm for me.
Regards,
Click to expand...
Click to collapse
now works
thanks
FilSex said:
now works
thanks
Click to expand...
Click to collapse
lol thought so, I think op's of rom threads should make it a little more clearer on the instructions part, as we've both realised it's so easy to miss the part out and **** up the entire installation.
Sent from my NexusHD2 using xda premium
Tenpin said:
lol thought so, I think op's of rom threads should make it a little more clearer on the instructions part, as we've both realised it's so easy to miss the part out and **** up the entire installation.
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
well done (although those instructions are in the threads hehe))
FilSex said:
now works
thanks
Click to expand...
Click to collapse
thks Work for me also
Thanks!!!
Tenpin said:
Hi mate try doing this on MAGLDR, go to Services, then click option 4. UseLast24NAND press yes
Then click on option 10 again, Services then option 5. ClearSD MDR.
After doing both those steps go onto usbflasher and flash the rom you wish.
Worked a charm for me.
Regards,
Click to expand...
Click to collapse
Thank you so much!!! I was going CRAZY!!!
Still not flashing
I tried everything above and it still refused to flash. I even started again from the beginning and it still didn't work. I formated the SD with SD formater, then I installed HSPL, I installed the Radio rom, wiped (task29), installed MAGLDR, went to 10. services, clicked option 4. UseLast24NAND press yes then clicked on option 10 again, Services then option 5. ClearSD MDR and finally, I flashed the Win 7.8 Rom.
Still got the message in the original post.
Please help!
Wrong messages:
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: flash write failed.
Info: .\RSPL\RSPL.cpp (710)
I has tried a lot of method,including reflash magldr 1.13 /task29/closed firewall...but it dosn't work! Who can help me? thx!
anybody help?
you have to open DWI.EXE in administrator mode.. right click.. open in Administrator mode (or something like this)
I'm having same problem... I have no idea where i'm going worng... are there any step ny step guide anywhere on this forum that ppl can link to... or perhaps a video that show the steps on how to install mange on HD2.. thanks
I had found the reason: there's some bad block in the nand,causing fail to write data into this block.
And, my HD2 couldn't be repaired by using MTTY. So ,I has to buy new phone to eat mango, perhaps samsung focus...
Thanks,but I'm using windows xp ,and flashing nodo quickly and successfully.
I found it's because of existing bad block at 2419 block,anyblock know how to repair the bad block? (I tried to use MTTY to repair,but failed)
because of bad block too ?
Dude ffs, Only one post is needed, You have a edit button. There is no need to post 4 in a row.
Had the same error, what worked for me was:
0. (just do it)
0. blow into micro sd card slot and clean the micro sd card itself. then try again
0. format micro sd card
0. try reinstalling now, if not --> continue
1. (task 29 and uninstalling HardSPL)
1. go into HardSPL and do a task 29 (format)
http://forum.xda-developers.com/showthread.php?t=644781
2. download the latest official winmo rom for hd2
http://forum.xda-developers.com/showthread.php?t=623283
3. extract the RUU_Signed.nbh and rename to LEOIMG.nbh, place this file on your Micro SD card (wich is empty of course)
go into HardSPL, and if you have done right, SPL will be installed and HardSPL will be removed
2. (installing HardSPL, radio and MagLDR)
4. download HSPL4 and install HardSPL 2.08 (http://forum.xda-developers.com/showthread.php?t=611433 (scroll down a bit))
5. install latest radio (Leo_RADIO_2.15.50.14**) (http://forum.xda-developers.com/showthread.php?t=611787)
6. install MagLDR 1.13 (http://forum.xda-developers.com/showthread.php?t=893618)
3. (install WP7 through MagLDR)
7. download rom of choise and install it through MagLDR
succes!
ruben302 said:
Had the same error, what worked for me was:
0. (just do it)
0. blow into micro sd card slot and clean the micro sd card itself. then try again
0. format micro sd card
0. try reinstalling now, if not --> continue
1. (task 29 and uninstalling HardSPL)
1. go into HardSPL and do a task 29 (format)
http://forum.xda-developers.com/showthread.php?t=644781
2. download the latest official winmo rom for hd2
http://forum.xda-developers.com/showthread.php?t=623283
3. extract the RUU_Signed.nbh and rename to LEOIMG.nbh, place this file on your Micro SD card (wich is empty of course)
go into HardSPL, and if you have done right, SPL will be installed and HardSPL will be removed
2. (installing HardSPL, radio and MagLDR)
4. download HSPL4 and install HardSPL 2.08 (http://forum.xda-developers.com/showthread.php?t=611433 (scroll down a bit))
5. install latest radio (Leo_RADIO_2.15.50.14**) (http://forum.xda-developers.com/showthread.php?t=611787)
6. install MagLDR 1.13 (http://forum.xda-developers.com/showthread.php?t=893618)
3. (install WP7 through MagLDR)
7. download rom of choise and install it through MagLDR
succes!
Click to expand...
Click to collapse
thx,but I have tried step by step , but failed at last.
Im having the exact same problem. I have tried almost everything. anyone?
Hi,
I had tried flashing WP 7 more than once, and until now i get this error
On My notebook :
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description:
Info: .\RSPL\RSPL.cpp (956)
And on my HD2 unit, the messages are :
USB Flasher Mode
Wait USB...USB
Layout...PC=8, ASI=4, OASI=-1
Erase
[ASIZE] START" 365 END: FC0 SIZE: C5B
PARTITION LAYOUT NEW
0: 0219 02A9 10 25
1: 02A9 0319 10 25
2: 0319 0359 10 25
3: 0359 0365 10 25
4: 0365 0FC0 10 25
5: 0FC0 0FC8 10 25
6: 0FC8 0FCC 10 25
7: 0FCC 1000 10 25
Erase...
D S: 0 E: 219
D S: 1 E: 2A9
D S: 2 E: 319
D S: 3 E: 359
D S: 4 E: 365
D S: 5 E: FC0
D S: 6 E: FC8
D S: 7 E: FCC
Save EMBR...
Default OS is WPH NAND...
Flashing 0 partition...0 [219-2A9] M0 OK A23E 288
Flashing 0 partition...0 [2A9-319] M0 OK BC51 2F1
Empty 2 Partition...OK
Flashing 3 Partiotion...3 [359-365] M0 OK D840 361
Flashing 4 Partiotion...4 [365-FC0] M2
And it stoped..
I had search everywhere and i found some thread that write about the error, but when i follow the instruction it didn't work.
So what should i do ?
Thanks,
Ronald
did you tried with "use last 24 partition block" under services in MAGDLR ?
Just something what pops in my head
assangflexx said:
did you tried with "use last 24 partition block" under services in MAGDLR ?
Just something what pops in my head
Click to expand...
Click to collapse
Yup, Including that one & didn't work
Also i Had tried Format the SD from my notebook but still, it didn't work
Additional information : I Use 4Gb MicroSd
Thanks,
Ronald
I'd try with another SD card before anything else. Or if you can try installing without an SD card. I am not sure that this is possible with mango though, but older versions could be installed without an SD card. Just to see if it is causing the problem.
ikovac said:
I'd try with another SD card before anything else. Or if you can try installing without an SD card. I am not sure that this is possible with mango though, but older versions could be installed without an SD card. Just to see if it is causing the problem.
Click to expand...
Click to collapse
This error happened when i use HD2O but didn't happen when i use XBMOD-Yuki ROM
What should i do ?
thanks
ronald_delgeano said:
This error happened when i use HD2O but didn't happen when i use XBMOD-Yuki ROM
What should i do ?
thanks
Click to expand...
Click to collapse
Did you try 'clear SD MBR' in Magldr?
mementototem said:
Did you try 'clear SD MBR' in Magldr?
Click to expand...
Click to collapse
I did that too and still got the error
thanks for replying,
Ronald
I found this thread interesting, for various reason, still a open question and google put it in the front line.
when this error apears in mi HTC HD2 was for a bad flash when i tried the windows mobile 7.8 (problems with the drivers on my windows 7 desktop or garbage in the nand i dont know).
so i tried reflash and always with maldrg 1.13 and a ROM, file and fail.
do the 24mB nand trick and clean SD card and still failing
do a task29 clean and still failing.
change SD and still the failing
and always maldrg put me the warning htc hd2 fatal hit 3 when i do the hardware reset
so my problems was solved with a SD ROM loading trick (load the ROM via microSDcard) with a important warning, do that cleaning ROM with the STOCK MANUFACTURING ROM ( if your cellphone was a telstra reload the telstra ROM with the SD trick, if your phone was vodafone reload the vodafone ROM with te SD trick, if your phone was a T.mobile reload the tmobile ROM with the SD trick etc.....) why, well it will clean all the NAND, including HSPL and the Radio version, and return to windows mobile 6.5 again. to restart and reload windows 7.8 mobile again and it works great.
so problem solved
I have tried almost everything to get wp7 roms to work Format sd card Class 10 8meg tried 2 different ones.
Task 29 - install magldr - 10 services (5clearsd mbr then 4 uselast24 nand) i have tried it both ways.
Task 29 -install wp 6.5 install magldr - 10 services (5clearsd mbr then 4 uselast24 nand)
I have also tried it this way An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: flash write failed.
Info: .\RSPL\RSPL.cpp (710)
Hopefully someone has some suggestions I have tried several roms
I am using TMous hd2 (us hd2)
hmmm it could be the procedure or the SD card?
this is what i did & it ran smoothly
.. run HD2 toolkit
...bootloader
- HSPL 2.08
- Task 29
- Radio_15.42.50.11U_2.15.50.14 >>> not necessary if you have it already
- MagLDR
- MagLDR Repartition 300/ 45
...boot to magldr
- Magldr
- Service
- Clear SD MBR
- uselast24NAND
- USB Flaser
- Flash WP
- Done!
if still the error persist try replacing the SD card coz mine had a problem with Trancend's 16gig card.
mengfei said:
hmmm it could be the procedure or the SD card?
this is what i did & it ran smoothly
.. run HD2 toolkit
...bootloader
- HSPL 2.08
- Task 29
- Radio_15.42.50.11U_2.15.50.14 >>> not necessary if you have it already
- MagLDR
- MagLDR Repartition 300/ 45
...boot to magldr
- Magldr
- Service
- Clear SD MBR
- uselast24NAND
- USB Flaser
- Flash WP
- Done!
if still the error persist try replacing the SD card coz mine had a problem with Trancend's 16gig card.
Click to expand...
Click to collapse
I think i am going to have to get a class 4 i have tried 2 different class 10 the only class 4 i have is locked from a previous rom (yuki rom) cannot get that one unlocked so i will have to go buy a new one any brand preferences.
try this way :
1, task29
2 falsh any rom of wm6.5
3,flash maglr 1.13 or higher
4, enable the last 24M of memory with the 8 option of maglr
5. flash wp7
wollice said:
try this way :
1, task29
2 falsh any rom of wm6.5
3,flash maglr 1.13 or higher
4, enable the last 24M of memory with the 8 option of maglr
5. flash wp7
Click to expand...
Click to collapse
i do not see the option to use the last 24m with option 8 in magldr i only see it in option 10 services
oler69 said:
it is in fact in option 10
Click to expand...
Click to collapse
i still get the errors no matter what i have done several ways
mengfei said:
hmmm it could be the procedure or the SD card?
this is what i did & it ran smoothly
.. run HD2 toolkit
...bootloader
- HSPL 2.08
- Task 29
- Radio_15.42.50.11U_2.15.50.14 >>> not necessary if you have it already
- MagLDR
- MagLDR Repartition 300/ 45
...boot to magldr
- Magldr
- Service
- Clear SD MBR
- uselast24NAND
- USB Flaser
- Flash WP
- Done!
if still the error persist try replacing the SD card coz mine had a problem with Trancend's 16gig card.
Click to expand...
Click to collapse
I was finally able to install WP7 thanks to you
Hey guys! I was trying to flash a wp 7.8 rom to have it on dual boot with android...
I tried 4 roms, and they all gives me this error:
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: Block is after end.
Info: .\RSPL\RSPL.cpp (704)
someone said I had to repartition magldr on 350 mb / 5mb, to use last24mb, sd mbr, I tried everything (except install after w6.5, I hope that isn't that the problem....)
so, anyone solved this?
thanks in advance
SOLVED, my luck, anyone who gets this error, pull out the sd card while flashing
throcker said:
SOLVED, my luck, anyone who gets this error, pull out the sd card while flashing
Click to expand...
Click to collapse
first at all: way repartition magldr 350 mb??????????????
read install tutorial from my signature how to install WP7 right
SDcard MUST be in device... SDcard is phone memory in WP7 and during setup phone create own system on SDcard....
dxdy said:
first at all: way repartition magldr 350 mb??????????????
read install tutorial from my signature how to install WP7 right
SDcard MUST be in device... SDcard is phone memory in WP7 and during setup phone create own system on SDcard....
Click to expand...
Click to collapse
I don't know about repartition, it didn't make sense for me too, but I tried it instead...
well, I wrongly left out the sd card while flashing (not while setup wp) and flash finished fine...two times!...
ops....ok, this sd trick worked for first time, now even with sd out it gives me the same error....don't know what to do, anyone is having problems with windows8?
throcker said:
ops....ok, this sd trick worked for first time, now even with sd out it gives me the same error....don't know what to do, anyone is having problems with windows8?
Click to expand...
Click to collapse
i flashed hundreds time WP7.x ROM's and never have problems....
possible problems:
- drivers
- USB cable or USB port
- wrong installation procedure, wrong steps...
- faulty HD2 device
once when WP7 ROM installed, after that no need to repeat procedure from beginning... is enough to run only flashing from number 5 in magldr... all is in my install tutorial...
dont forget to not make partition (300 mb/5mb) this is only for Android flashing.... not WP7... this must be deleted (with Task29)
dxdy said:
i flashed hundreds time WP7.x ROM's and never have problems....
possible problems:
- drivers
- USB cable or USB port
- wrong installation procedure, wrong steps...
- faulty HD2 device
once when WP7 ROM installed, after that no need to repeat procedure from beginning... is enough to run only flashing from number 5 in magldr... all is in my install tutorial...
dont forget to not make partition (300 mb/5mb) this is only for Android flashing.... not WP7... this must be deleted (with Task29)
Click to expand...
Click to collapse
thank you for your answer, yes I'm not partitioning memory (it was a stupid thing)
is strange because last week I installed wp without problems, so, my phone is working fine
drivers are set up correctly (or my pc would not recognize correctly the device), I tried different usb ports...nothing...
I'm still trying...I use last24nand also, but isn't useful