Related
Make sure you are updated to NoDo...
Here is a quick and easy guide:
UPDATING TO MANGO
1) Install the Windows Phone Support Tools 32 bit 64 bit
2) Connect your phone
3) Run Update.bat
4) The batch file will backup your phone, install the updates, and copy your backup to C:\PreMangoState
5) Zune should open and prompt for an update. Follow instructions from there.
6) After installing the first update, Zune will update again to 7661.
RESTORING NODO
Automatic:
You can use the Restore.bat file to automate the restore.
Manual:
1) Copy your backup in C:\PreMangoState to %userprofile%\AppData\Local\Microsoft\Windows Phone Update
2) Run Zune, navigate to settings, click Update, and press Restore
Dude, is this safe or aare there chances of BRICKING my phone?
[email protected] said:
Dude, is this safe or aare there chances of BRICKING my phone?
Click to expand...
Click to collapse
There is always a chance, but in this situation it is minimal....Just make sure you are on NoDo, and follow the steps properly.
I updated to Zune a few weeks ago, my issue is that I cant seem to revert back, I have backups in my premangostate folder, each one is about 4GB, but when I put a backup folder in the windows phone update folder and run the restore.bat it says there's no restore point found.. any ideas what im doing wrong?
Edit: I mean updated to mango..
I actually just got over this problem, took me a bit to figure out.
What you need to do is what I did (not sure if it will work):
Delete the PreMangoState folder
Empty recycle bin
Downgrade to zune 4.7
have the WP support tools (Beta 2) installed
restart computer
do the Update.bat program
It should work as normal. When your phone is up to Mango status, then upgrade to Zune 4.8.
My theory is that the update.bat files know that the PreMangoState folder is there if you haven't emptied the recycle bin (since all that is doing is marking the space on your drive as free). However, emptying the recycle bin and restarting clears the space for good, and the update file will work as if it was run the first time.
How to confirm NoDo again?
is this will work on Tmo-US carrier DVP phones.
Appreciate it! But we need to point out this is update to Mango beta, right?
I used the other technique posted for my Tmo DVP and works great. Basically manual without the BAT files and W/o Phone support tools installed. Can't find the link though.
can you pls tell me the steps
cdgoin said:
I used the other technique posted for my Tmo DVP and works great. Basically manual without the BAT files and W/o Phone support tools installed. Can't find the link though.
Click to expand...
Click to collapse
can you pls tell me the steps to follow
Does this work for all DVPs or just T-Mobile? Does it have to be a Developer unlocked device?
All5horizons said:
Does this work for all DVPs or just T-Mobile? Does it have to be a Developer unlocked device?
Click to expand...
Click to collapse
It works for AT&T as well. Does not need to be developer unlocked.
NoDo
What the hell is this NoDO...Please explain
jrkatc said:
What the hell is this NoDO...Please explain
Click to expand...
Click to collapse
NoDo inshort for No-Donut. Its basically a codename (by MS) given to the Windows Phone Feb 2011 update that brought copy& paste functionality and serveral other improvements in the OS.
I failed to upgrade to the next version of Zune after running this. Now when I connect the phone I get the Zune Software update required box. When I click ok, it tries download then gives me the message, "Can't find the media for installation package for 'Zune WMDU Component'. It might be incomplete or corrupt."
Any thoughts or am I screwed?
in the links that the OP provided, there is a download for Zune 4.8. Just uninstall your normal zune and install that one from the downloaded files. Your library will be the same, it will star up normally.
Thunder_47 said:
in the links that the OP provided, there is a download for Zune 4.8. Just uninstall your normal zune and install that one from the downloaded files. Your library will be the same, it will star up normally.
Click to expand...
Click to collapse
Remember to BACKUP YOUR BACKUP, as uninstalling Zune will likely delete it.
I don't see the download for Zune 4.8 in my downloaded files. When I drill down all I get is the Prov, read me text file, restore bat and update bat. is it in the prov?
Ah - my mistake I must of forgotten that this download package did not include the Zune update
I followed this thread here when I originally updated. Its very thorough and helpful.
That did the trick. Up & running. thanks.
I'm not new to WP7 but just new to all the sideload and unlocking thing, so i was wondering where can i find some homebrew good apps for my phone, any repo or something like that if it exists, it might be of so much help.
WaddyMontero said:
I'm not new to WP7 but just new to all the sideload and unlocking thing, so i was wondering where can i find some homebrew good apps for my phone, any repo or something like that if it exists, it might be of so much help.
Click to expand...
Click to collapse
Need to be more specific. Most homebrew is here (see Development/Software threads)
Also see the post in my sig for more details if you don't know where to start.
EnderPsp said:
Need to be more specific. Most homebrew is here (see Development/Software threads)
Also see the post in my sig for more details if you don't know where to start.
Click to expand...
Click to collapse
Sorry, i'll try to be more specific. I previously owned a HD7 but i change it for a Focus, 'cause i wanst gettin' access to the 3g network on my country out of it. So now i got the Focus and i was tryin' to unlockin' it, what i did, usin' the WindowBreakMe method and also i installed magdlr on the phone. I was looking for sideload apps to try on my phone, thats what i meant in first place, thanks to the post on your sig and endlessly searching i've found Bazaar and i've installed it on my phone, but now when i download any app from Bazaar, it gives me an error, that go as follows "Bazaar can't install applications on your device. It seems that is not fully unlocked. To deploy applications you should download Bazaar for PC. Read more at www.WP-Bazaaar.com".
Im sure my device is fully unlocked, i've installed Samsung Root Tools and DiagProvXML and enabled internet sharing and the 3g switch, and many more. Do you think my device relocked itself even i got the checkmark "Prevent Device Relocking" checked at Samsung Tools. Help, please.
WaddyMontero said:
Sorry, i'll try to be more specific. I previously owned a HD7 but i change it for a Focus, 'cause i wanst gettin' access to the 3g network on my country out of it. So now i got the Focus and i was tryin' to unlockin' it, what i did, usin' the WindowBreakMe method and also i installed magdlr on the phone. I was looking for sideload apps to try on my phone, thats what i meant in first place, thanks to the post on your sig and endlessly searching i've found Bazaar and i've installed it on my phone, but now when i download any app from Bazaar, it gives me an error, that go as follows "Bazaar can't install applications on your device. It seems that is not fully unlocked. To deploy applications you should download Bazaar for PC. Read more at www.WP-Bazaaar.com".
Im sure my device is fully unlocked, i've installed Samsung Root Tools and DiagProvXML and enabled internet sharing and the 3g switch, and many more. Do you think my device relocked itself even i got the checkmark "Prevent Device Relocking" checked at Samsung Tools. Help, please.
Click to expand...
Click to collapse
Specific enough, I'd say
If you've already deployed WP7 Root Tools and Samsung Tools, you can always re-run the unlock sequence (in Root Tools first and then ST). Just to keep in mind Do not remove these 2 apps from the phone to test sideloading, once unlocked!
I'm not familiar with Bazaar but it seems you're missing a PC component used in the deployment process?
As for deploying, choose a XAP from the development forum and try to deploy it. If you can, it means you're unlocked (evidently).
If you can't deploy, try WINCO's XAP Assistant.
Let us know how it goes.
It's dangerous if you don't know what it is.
You must read every instructions in the tool carefully.
I don't guarantee that I'll answer every questions about this tool.
W1-C00 and W1-U00 are both supported. W1-U34 is not confirmed, but it should be same as W1-U00 in theory.
XP is not supported, you need Vista and above system.
Tested only on China ROM GDR 0/1/2/3, but all ROMs are compatible in theory. If something wrong, post your phone's version and ROM version.
Only universal homebrew xap will work. Anything use Samsung service won't work.
Click to expand...
Click to collapse
If you messed up everything and don't know how to fix, try this to get your phone alive.
http://forums.wpcentral.com/huawei-ascend-w1/229445-those-who-get-their-w1-market-locked-china.html
Features (part):
Interop Unlock
Xap CAPs Unlock
Camera shutter sound option
Wifi static IP option
Map2SD
MTPRoot
Sorry for my bad English in translation of this tool.
rkBreakout v1.2e Build 2014.04.07:
View attachment rkbreakout_v1.2.zip
Click to expand...
Click to collapse
Reserved
some little corrections to your translation, if you don't mind.
2. This tool may corrupt your device and void your warranty, use it at your own risk. The author has made best efforts on this tool to avoid these risks, but the author cannot be held responsible for any damages to your phone. If your device is corrupted, the author will not provide any service or guide to repair.
5. This tool is NOT a ROM-Flashing tool, so all your data is preserved after jailbreak.
Hope I could help.
is there a bootloader fix option for w1-U34(GDR1 Windmobile-Canada ) . I tried your app with both u00 and c00 options andIt shows the phone in device manager and in step 4 "Phone Connected". But in step 5 it shows waiting for phone to restart, With an error message " Image download Failed. Cookie (if Present) not Received. Could you add an option of this model too, or is there a way to change it from u34 to u00.
P.S on a sidenote Great job on the app its pretty easy to use, I do get an error when I open it runtime error '53' - File not found, after I click ok opens the app not sure if im missing something or its a problem with the app
Any Huawei apps with Interop caps are possible to install like Memory managment?
Suhaib10 said:
is there a bootloader fix option for w1-U34(GDR1 Windmobile-Canada ) . I tried your app with both u00 and c00 options andIt shows the phone in device manager and in step 4 "Phone Connected". But in step 5 it shows waiting for phone to restart, With an error message " Image download Failed. Cookie (if Present) not Received. Could you add an option of this model too, or is there a way to change it from u34 to u00.
P.S on a sidenote Great job on the app its pretty easy to use, I do get an error when I open it runtime error '53' - File not found, after I click ok opens the app not sure if im missing something or its a problem with the app
Click to expand...
Click to collapse
Currently W1-U34 is not supported because partition struct is unknow.
Runtime error is a small bug, fixed, thanks.
djtonka said:
Any Huawei apps with Interop caps are possible to install like Memory managment?
Click to expand...
Click to collapse
No, Storage Manage need driver by Huawei. AFAIK only Russian ROM has driver support it.
You should details this jailbreak, most users do not know what expect after it. Anything new on menu, visible an partition hided before or Interop etc
djtonka said:
You should details this jailbreak, most users do not know what expect after it. Anything new on menu, visible an partition hided before or Interop etc
Click to expand...
Click to collapse
It's fun for users that finding new stuff by themselves. Actually only a little things have been changed after jailbreak.
Doing now 2nd time and have perform HR again due to stocking on black screen after booting and your logo.
reker said:
Currently W1-U34 is not supported because partition struct is unknown.
.
Click to expand...
Click to collapse
well if there is anything I can do to help u find out, let me know ill be more than happy to help.
also is there a way to backup my current rom (stock).
Suhaib10 said:
well if there is anything I can do to help u find out, let me know ill be more than happy to help.
also is there a way to backup my current rom (stock).
Click to expand...
Click to collapse
Post 'About' on your phone, I need hardware and cpu model
W1-U34_1030.5614.46900.20900.USA-Channel.rar:
http://pan.baidu.com/s/1o6LkhN8
Reker is samething wrong with it, always got black screen while after booting and Huawei logo. Only after HR the phone is booting properly but is nothing missing after it?
djtonka said:
Reker is samething wrong with it, always got black screen while after booting and Huawei logo. Only after HR the phone is booting properly but is nothing missing after it?
Click to expand...
Click to collapse
My mistake, an old test file was used in tool. I'll corret this in 30minutes
Edit:
Fixed, try again
Won't even start
djtonka said:
Won't even start
Click to expand...
Click to collapse
You mean the tool? I tried it's OK on my computer. Maybe upload problem? I use my server as a proxy to pack and upload.
I've packed again and reuploaded it
it is working like a charm now
reker said:
Post 'About' on your phone, I need hardware and cpu model
W1-U34_1030.5614.46900.20900.USA-Channel.rar:
http://pan.baidu.com/s/1o6LkhN8
Click to expand...
Click to collapse
Here you go even attached other stuff from HWdiag
I'll try that out that rom . Thanks
Suhaib10 said:
Here you go even attached other stuff from HWdiag
I'll try that out that rom . Thanks
Click to expand...
Click to collapse
U34 should be same as U00. You can try change a computer or reinstall QPST/Driver first. Some people said that 'cookie not present error could be fixed by using a winxp/another qpst windows driver'
reker said:
U34 should be same as U00. You can try change a computer or reinstall QPST/Driver first. Some people said that 'cookie not present error could be fixed by using a winxp/another qpst windows driver'
Click to expand...
Click to collapse
that could be the problem cause I was trying on Win 8 and it auto found the drivers didn't need to install them. I'll try it on XP later today.
Suhaib10 said:
that could be the problem cause I was trying on Win 8 and it auto found the drivers didn't need to install them. I'll try it on XP later today.
Click to expand...
Click to collapse
The driver should be installed manually, do not use the driver system auto provided.
Don't try XP, the tool do not support it
before some days extra+info get upadated WP10TP and also on Wp8.1. aftrer update we can't install extra+info to SDcard..now how to mod vcreg with extra+info.. for WP8.1 ..
any one can give me the list of cap. and path of cap_ so i will try to edit CAp_ with modded PDF 3. i think this might be worked
you cant do anything... be patient and wait news...
I think it's better to wait for w10 .
ngame said:
I think it's better to wait for w10 .
Click to expand...
Click to collapse
ya we understand:::;;
waiting for new tweaks:::
done:good::good::good::good::good::good:
A AJAY said:
ya we understand:::;;
waiting for new tweaks:::
done:good::good::good::good::good::good:
Click to expand...
Click to collapse
You are not alone my friend T_T
ciao!! Good news for you, some weeks ago i patched an old version of extra & info, deploy and move it to sd!! try!!
https://mega.nz/#!R5YmVTLI!NpzDEkY80rcqYKaDV94UmFbDagvatsH2IzMTWDA5wQk
canapo92 said:
ciao!! Good news for you, some weeks ago i patched an old version of extra & info, deploy and move it to sd!! try!!
https://mega.nz/#!R5YmVTLI!NpzDEkY80rcqYKaDV94UmFbDagvatsH2IzMTWDA5wQk
Click to expand...
Click to collapse
no luck with the windows application deployment tool, error 0x81030120
I believe this error is related to having interop capabilities in one of the libraries included in your XAP.
is there another deployer tha would work? (i already tested WPV xap deployer, also, no luck with that)
i'm not correct, maybe it's impossible to move e&i into sd, sorry
rickastillo said:
no luck with the windows application deployment tool, error 0x81030120
I believe this error is related to having interop capabilities in one of the libraries included in your XAP.
is there another deployer tha would work? (i already tested WPV xap deployer, also, no luck with that)
Click to expand...
Click to collapse
Have you tried with wppt ??? Or with this modified version of deployment tool http://forum.xda-developers.com/windows-phone-8/development/tool-appdeploy-8-1-capabilities-t3158053
ca_guri01 said:
Have you tried with wppt ??? Or with this modified version of deployment tool http://forum.xda-developers.com/windows-phone-8/development/tool-appdeploy-8-1-capabilities-t3158053
Click to expand...
Click to collapse
nah, tested both tools and nothing
I tried full FS access by patching an old version of CustomPFD to see if i could replace extras&info directly from phone memory.
I think some directories are hidden so i could not find the directory where the apps use to be installed.
However, i found a directory with the OEM apps (touch, extra&info, etc), but it seems that it's there only to be applied after a hard reset or something like that, so just replacing files wasn't enough. Extras&Info wasn't the only app with Interop Caps, but almost any app that is under settings has that cap.
So i unistalled touch settings and downloaded it from SD then i used MetroCommander to replace the SD files the old way (before CustomWPSystem was created, lol). Got nothing but an endless "Loading..." screen, but i guess i did something wrong.
But technically (someone correct me if i'm wrong) we can do Interop+Caps unlock using some other app from settings, right?
I'm pretty sure i've seen a settings app with a lot of capabilities in the manifest, not just InteropCapabilities, i don't remember exactly but it had something to do with SMS
TheBITLINK said:
I tried full FS access by patching an old version of CustomPFD to see if i could replace extras&info directly from phone memory.
I think some directories are hidden so i could not find the directory where the apps use to be installed.
However, i found a directory with the OEM apps (touch, extra&info, etc), but it seems that it's there only to be applied after a hard reset or something like that, so just replacing files wasn't enough. Extras&Info wasn't the only app with Interop Caps, but almost any app that is under settings has that cap.
So i unistalled touch settings and downloaded it from SD then i used MetroCommander to replace the SD files the old way (before CustomWPSystem was created, lol). Got nothing but an endless "Loading..." screen, but i guess i did something wrong.
But technically (someone correct me if i'm wrong) we can do Interop+Caps unlock using some other app from settings, right?
I'm pretty sure i've seen a settings app with a lot of capabilities in the manifest, not just InteropCapabilities, i don't remember exactly but it had something to do with SMS
Click to expand...
Click to collapse
Well , i think that we just have to remain with vanilla wp 8.1 until they fix wp10 annoying bugs, everytime i think i found a work around for a bug, there appear more bugs, my fault though, i chose the fast ring...
Now that Groove supports gapless playback, i'm considering going back to W10M (downgraded last week to WP8.1). But it's a hard choice, it sure has nice features but some bugs are just too annoying.
Did they fix the screenshots not appearing in Messenger/WA bug in 10549?
any updates on this? i have WP8.1 Update 2 and i'm having the same issues, not being able to install extras&info to SD card. i read somewhere on reddit (i think) that someone found a method that works currently, but searching around, i can't seem to find out the procedure..
cpshelley2 said:
i read somewhere on reddit (i think) that someone found a method that works currently, but searching around, i can't seem to find out the procedure..
Click to expand...
Click to collapse
And marmot puts it chocolate in the alu-foil...
dxdy said:
And marmot puts it chocolate in the alu-foil...
Click to expand...
Click to collapse
thank you for that wholly worthless response to an honest inquiry..
Try to push this cab using this metod: http://forum.xda-developers.com/win...ile/guide-deploying-astoria-packages-t3214481
Read this http://forum.xda-developers.com/showpost.php?p=63446863&postcount=58 , in cab folder put this unarchived :
augustinionut said:
Try to push this cab using this metod: http://forum.xda-developers.com/win...ile/guide-deploying-astoria-packages-t3214481
Read this http://forum.xda-developers.com/showpost.php?p=63446863&postcount=58 , in cab folder put this unarchived :
Click to expand...
Click to collapse
not work .gives an error and not restart as like project astoria cabs..so it not work.
Like the subject says I am having a few problems.
I have a Lumia 950 XL, which I have just acquired.
My first problem is that I have no problem sideloading apps, but if I try to install too many I get this message "unable to install application. the maximum number of deveiloper applications on this phone has been reached. please uninstall a developer application or try again". I think it is letting me install about 10, but won't let me install anymore.
Ok My second problem is that I followed this tutorial on youtube, which I thought might fix my first problem
Seemed like a good tutorial but I had a couple of problems.
I installed Windows Universtal Toll (WUT). CMD Injector and Interop Tools (RC)
The problem was that the CMD Injector just shuts down when I click 'Inject'
Also in the Interop tools I can't turn on Inerop/Cap unlock or New Capability Engine Unlock. It just turns on again.
I hope someone can help me with these problems.
The first problem is the most annoying as I have tons of XAP files I would like to install
regards
Asimov
I have now realised what I did wrong. I followed the wrong tutorial for an x50 phone. Unfortunately I think I have now killed my phone as I ticked the option Restore NDTKSrvc and it won't turn off.
I tried following the following tutorial for doing the vcReg10 but it won't work because of the Restroe NDTKSrv. I think I have done something stupid, and now I can't even see my documents and pictures when I plug in my USB cable. I just see a pile of system files.
Asimov500 said:
I have now realised what I did wrong. I followed the wrong tutorial for an x50 phone. Unfortunately I think I have now killed my phone as I ticked the option Restore NDTKSrvc and it won't turn off.
I tried following the following tutorial for doing the vcReg10 but it won't work because of the Restroe NDTKSrv. I think I have done something stupid, and now I can't even see my documents and pictures when I plug in my USB cable. I just see a pile of system files.
Click to expand...
Click to collapse
Ok I did a complete reset, so the phone is back to square one. Gonna redo the above tutorial before copying everything back to the phone.
Right I got the phone unlocked ok, but there is a but. I followed the above tutorial on how to unlock the phone and everything went fine. So then I downloaded WUT Windows Universal Tool, but here is the problem with it. It download to the download folder. For instance I downloaded TinyVNC, but if I try to install from the phone it don't install. However if I copy it back to my PC and install with WPV XAP deployer it works.
Can you tell me why I can't install straight from my phone?
I can double click and it says install, but it never installs.
Asimov500 said:
Right I got the phone unlocked ok, but there is a but. I followed the above tutorial on how to unlock the phone and everything went fine. So then I downloaded WUT Windows Universal Tool, but here is the problem with it. It download to the download folder. For instance I downloaded TinyVNC, but if I try to install from the phone it don't install. However if I copy it back to my PC and install with WPV XAP deployer it works.
Can you tell me why I can't install straight from my phone?
I can double click and it says install, but it never installs.
Click to expand...
Click to collapse
Perhaps that's because along with the WUT you get a valid certificate (e.g. WUT_1.4.11.0_x64.cer) , which is missing from the phone.