Database Users

[Q] my phone is bricked? E: Can't mount/cache /recovery/last_log

i think my phone is brick, everytime i go to cwm and wipe data or wipe cache it always say ( E: Can't mount/cache /recovery/last_log ).. how can i fix it?

Your gonna have to flash stock rom using odin the info you need is here
http://forum.xda-developers.com/showthread.php?t=1465800
Hit THANKS you ungrateful bastard...plz

Change your CWM.zip
I too faced same problem at my first try.
-sent from Fx warrior's XDA App

kumbar55 said:
Change your CWM.zip
I too faced same problem at my first try.
-sent from Fx warrior's XDA App
Click to expand...
Click to collapse
thanks pro. i had problem like you. itry other cwm.zip and it very cool.

Cant mount cache recovery log
I had a normal factory setup Samsung Galaxy Y GT S5360 and I tried to install a new KItKit Rom but Its all gone pearshaped !!
I have tried a load of different images which all load ok with the exception tat i get error messages like Cant mount cache recovery log.
I have also tried using odin to flash it back to its origonal firmware but after selecting the 3 files it runs and finishes saying failed 1
The phone does go into recovery mode and then I can run any of the cwm's that i have tried.
Doesnt exactly go into download mode as per any pictures ive seen ! I can either put it into recovery mode or with another key press put it where just the battery icom shows up when connected to the pc.
I have the samsung drivers installed ok on my pc.
Should I just give up ! On one image I did manage to boot it but it kept restarting unless the sim was out but i have not recreated that again!

npire1 said:
I had a normal factory setup Samsung Galaxy Y GT S5360 and I tried to install a new KItKit Rom but Its all gone pearshaped !!
I have tried a load of different images which all load ok with the exception tat i get error messages like Cant mount cache recovery log.
I have also tried using odin to flash it back to its origonal firmware but after selecting the 3 files it runs and finishes saying failed 1
The phone does go into recovery mode and then I can run any of the cwm's that i have tried.
Doesnt exactly go into download mode as per any pictures ive seen ! I can either put it into recovery mode or with another key press put it where just the battery icom shows up when connected to the pc.
I have the samsung drivers installed ok on my pc.
Should I just give up ! On one image I did manage to boot it but it kept restarting unless the sim was out but i have not recreated that again!
Click to expand...
Click to collapse
To fix cache not mounting see my thread
http://forum.xda-developers.com/showthread.php?p=52739994
To flash stock rom via odin see my thread
http://forum.xda-developers.com/showthread.php?p=48462297#post48462297

marcussmith2626 said:
To fix cache not mounting see my thread
http://forum.xda-developers.com/showthread.php?p=52739994
To flash stock rom via odin see my thread
http://forum.xda-developers.com/showthread.php?p=48462297#post48462297
Click to expand...
Click to collapse
Ok thanks, I will try it now !
---------- Post added at 10:40 AM ---------- Previous post was at 10:33 AM ----------
No It did not work !!
I went to backup and restore and created a backup. It noted errors. I then restarted and went to backup and restore and selected advance and selected the backup file and the cache but it still has the same prob ! ;(
---------- Post added at 10:45 AM ---------- Previous post was at 10:40 AM ----------
E: Cant mount / cache/recovery/command
E: Cant mount / cache/recovery/log
E: Cant open / cache/recovery/log
E: Cant open / cache/recovery/last_log

npire1 said:
Ok thanks, I will try it now !
---------- Post added at 10:40 AM ---------- Previous post was at 10:33 AM ----------
No It did not work !!
I went to backup and restore and created a backup. It noted errors. I then restarted and went to backup and restore and selected advance and selected the backup file and the cache but it still has the same prob ! ;(
Click to expand...
Click to collapse
you need to reboot to recovery again after restoring cache to see if it worked
you can do it using biels kernel - works fine on that - you will have to convert your system to ext first
first flash biels temp cmw
http://forum.xda-developers.com/showthread.php?t=2649475
mount everything and flash the ext converter tool (unmount and remount system)
http://www.mediafire.com/download/s6191k8ze9en0l6/ext4_formatter.zip
mount everything again and flash flash biels kernel
http://www.mediafire.com/download/lzw3ddt9dtd9tw3/kernel_CM7_v4.0_totoro.zip
Then reboot to recovery mount everything (unmount and remount system) and flash cm7
http://forum.xda-developers.com/showthread.php?t=2673610
once you have booted cm7 you can go back into cwm make a nandroid backup and then restore cache
if you want to convert back to rfs to use stock based roms you will have to flash stock rom via odin
note you cant boot stock roms using this kernel but you can boot cm7 roms if you want to flash cm7 after doing that

marcussmith2626 said:
you need to reboot to recovery again after restoring cache to see if it worked
you can do it using biels kernel - works fine on that - you will have to convert your system to ext first
first flash biels temp cmw
http://forum.xda-developers.com/showthread.php?t=2649475
mount everything and flash the ext converter tool (unmount and remount system)
http://www.mediafire.com/download/s6191k8ze9en0l6/ext4_formatter.zip
mount everything again and flash flash biels kernel
http://www.mediafire.com/download/lzw3ddt9dtd9tw3/kernel_CM7_v4.0_totoro.zip
Then reboot to recovery mount everything (unmount and remount system) and flash cm7
http://forum.xda-developers.com/showthread.php?t=2673610
once you have booted cm7 you can go back into cwm make a nandroid backup and then restore cache
if you want to convert back to rfs to use stock based roms you will have to flash stock rom via odin
note you cant boot stock roms using this kernel but you can boot cm7 roms if you want to flash cm7 after doing that
Click to expand...
Click to collapse
Ok Im no expert so are you saying that process will convert me to "ext" or should I do something first ?
Thanks for the help by the way

npire1 said:
Ok Im no expert so are you saying that process will convert me to "ext" or should I do something first ?
Thanks for the help by the way
Click to expand...
Click to collapse
follow all of that and you will be on ext system partition and cm7
or follow
http://bieltv3.blogspot.com.es/2014/03/problems-while-flashing-final-solution.html
just remember to unmount system and then remount system
if you want to convert back to rfs to use stock based roms you have to flash stock rom via odin

npire1 said:
Ok Im no expert so are you saying that process will convert me to "ext" or should I do something first ?
Thanks for the help by the way
Click to expand...
Click to collapse
Ok first stumbling block is after the first step It says error mounting cache and data ?

npire1 said:
Ok first stumbling block is after the first step It says error mounting cache and data ?
Click to expand...
Click to collapse
flash stock rom via odin and start from begining
follow all instructions from
http://bieltv3.blogspot.com.es/2014/03/problems-while-flashing-final-solution.html
if you get mount errors just ignore and carry on

Wipe data, cache and dalvik ? Does that include wipe cache partiatian ?

npire1 said:
Wipe data, cache and dalvik ? Does that include wipe cache partiatian ?
Click to expand...
Click to collapse
if you like but you might get a mount error with cache just ignore
as long as system and data are formatted and then mounted thats fine

Ok welll I guessed yes and its loaded so hopefully its fixed ! thank you so much ! I was almost going to give up ! ; )

npire1 said:
Ok welll I guessed yes and its loaded so hopefully its fixed ! thank you so much ! I was almost going to give up ! ; )
Click to expand...
Click to collapse
if cache is not mountable after the rom has booted and you get error 492 with trying to download apps just make a nandroid backup and then advanced restore cache from that nandroid backup
oh and as you are using cm7 you need to flash gapps to get playstore and so on
you can download it from
http://goo.im/gapps/gapps-gb-20110828-signed.zip
make sure you unmount then remount system and data before flashing

marcussmith2626 said:
if cache is not mountable after the rom has booted and you get error 492 with trying to download apps just make a nandroid backup and then advanced restore cache from that nandroid backup
Click to expand...
Click to collapse
I understand, thanks !
So when I started out with this I wanted something like KitKat as I iunderstand you can better control app access to mobile data and wifi with various apps that are available. All the apps for this 2.3 version of android did not actually work !
So do you think I could now upgrade to a newer android or should just leave it ?

npire1 said:
I understand, thanks !
So when I started out with this I wanted something like KitKat as I iunderstand you can better control app access to mobile data and wifi with various apps that are available. All the apps for this 2.3 version of android did not actually work !
So do you think I could now upgrade to a newer android or should just leave it ?
Click to expand...
Click to collapse
no as there is no kitkat for galaxy y
there is also no jellybean
there is ics via cm9 but there is no audio/mic so its not useable as a phone
cm7 is the best you are going to get with nearly all core functions working (the only thing that doesnt work is streaming audio via bluetooth and fm radio)

marcussmith2626 said:
no as there is no kitkat for galaxy y
there is also no jellybean
there is ics via cm9 but there is no audio/mic so its not useable as a phone
cm7 is the best you are going to get with nearly all core functions working (the only thing that doesnt work is streaming audio via bluetooth and fm radio)
Click to expand...
Click to collapse
Oh I see !
I did try and fail to install something called cyanocream v4 and another one that they did say worked on my phone but I guess that's its either rubbish or It just doesnt work properly!
Thanks again !

npire1 said:
Oh I see !
I did try and fail to install something called cyanocream v4 and another one that they did say worked on my phone but I guess that's its either rubbish or It just doesnt work properly!
Thanks again !
Click to expand...
Click to collapse
its still gingerbread that is just themed - its also banned here on xda for using other peoples work without permission and containing warez

[Q] Why i cant Find Cusrom Zip on ROM manager

Good Morning for xda peoples
im a newbie here.. i have some question please help me with this thing...
this day i finally decided to use this " ►►[AOSP] 4.3 - S4 Google Edition - v6 - Feel the Experience of Nexus◄◄ " on my Samsung galaxy s4..
the question is...
i already do his step explanation Flashing:
1. Disabled your Sim-Pin
2. Boot to your recovery
3. Wipe data and cache
4. Install the zip
until the 4th step.. its failed.. theres some kind of red notification in the instalation. " E: signature ... failed " if im not wrong... and i tryied to use ROM manager to instal it...
and why i cant find any zip on it..?
how to flashing my s4 if theres a problem like this?
please help me with some intsruction.. i am really a newbie here... i hope u guys can lend me a help ^_^.. thanks before for reading this and replying to help me

What file did you try to flash if you can't find the rom you (hopefully) downloaded? Do you know witch recovery you are using?
Sent from my GT-I9505 using xda premium

Preciousillusion said:
Do you know witch recovery you are using?
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
thanks for the fast responed for u...
i guess i was using ROM manager apk if im not wrong mention it...theres instal ROM from SD card option... when i put the Zip on it wipe and clean.. theres a option to reboot on sistem recovery...
is like Android system recovery (3e) theres no option for installing or anything
-reboot system now
=apply update from ADB
-aply update from exxternal storage
-wipe cehck partition
-aply update from cache...
i guess thats all... am i entering wrong recovery mode?sorry for if im too noob at this

ZachariasErsa said:
i guess thats all... am i entering wrong recovery mode?sorry for if im too noob at this
Click to expand...
Click to collapse
I think Before you can flash a rom with rom manager, you will need a custom recovery.
there are a couple to chose from :
TWRP
CWM
CWM Philz Touch
The creator from the google rom rom wich you want to flash gave no specific one, so you can pick one and all three should work. i'm using philz touch at the moment.
The custom recovery must be flashed from pc with odin, if you never used odin before, you need to install usb drivers / or 'kies' first.
If you never used Odin, then make sure you read a little first on how to use it, it's simple but can give bootloops or worse if not used well.
Since you have to flash this recovery you might as well flash it from there? it's easier i think and has more options then rom manager.
turn off phone -> press volume up - menu button - power button at the same time wich will open custom recovery and from there follow the guidelines from the google edition v6 topic on how to flash it.
-> Inside the custom recovery there is an option for backup, i suggest if this is your first custom rom tryout, that you make a backup in that custom recovery before trying, like that you can't do much wrong while testing

i guess i made it ... thanks for anyone who trying to help me..
now running JB4.3 thanks before

-> owyess, those custom recoverys are for i9505, if you have an i9500 or other device, DON't flash these but get your own version at the 'original android development' threads from your device

2 Serious problems

I have been a Samsung Galaxy Y user for more than a year. I have to say that this device is awesome. But.... I have later noticed 2 problems.
1) One day I tried to install Elegance ROM. I followed all steps very carefully and when the installation was done, I rebooted my phone. Unfortunately, my phone booted up again at Samsung stock firmware. I tried to enter recovery mode because I wanted to see what went wrong, but I was automatically redirected to CWM recovery. I tried once again to install Elegance ROM, and the result was the same. From that day, CWM is my default recovery. Why? How to fix this??? I can't access stock recovery and I also cannot install any custom ROMs. How to fix this?
2) Even my SD card is full with songs, photos and videos, the "Gallery" and "Music" apps don't read any file. Why? How to fix this?
P.S. I'm running stock 2.3.6 rooted.
Thanks for help.
Sent from my GT-S5360 using xda app-developers app

You have a permanent cwm because you are using a custom kernel with a permanent cwm - probably was included in the rom zip
If you want stock recovery flash stock kernel (can be found in general section or flash hells fusion #50 from dev section and select option to flash stock kernel)
you would of remained on stock rom after flashing another rom because you didn't mount system in cwm before you flashed the zip
As for your other problem flash stock rom via odin as you have probably mucked something up from flashing zips incorrectly

So.... If I flash the stock kernel, will I be able to access stock recovery and flash CWM every time I want?
By the way, this mess with the files started when I changed my phone's SIM card. When I turned my ohine on again, I opened by mistake the "Galery" app. I noticed that no images were there. I also thought that the "music" might also had the same problem. And that's what happened. Which Odin version I will need?
Thanks again.
Sent from my GT-P3110 using xda premium

dimsar2013 said:
So.... If I flash the stock kernel, will I be able to access stock recovery and flash CWM every time I want?
By the way, this mess with the files started when I changed my phone's SIM card. When I turned my ohine on again, I opened by mistake the "Galery" app. I noticed that no images were there. I also thought that the "music" might also had the same problem. And that's what happened. Which Odin version I will need?
Thanks again.
Sent from my GT-P3110 using xda premium
Click to expand...
Click to collapse
Dude ur 2nd problem may be caused by Ur sd card!!
Try another sd card may it help you!!

dimsar2013 said:
So.... If I flash the stock kernel, will I be able to access stock recovery and flash CWM every time I want?
By the way, this mess with the files started when I changed my phone's SIM card. When I turned my ohine on again, I opened by mistake the "Galery" app. I noticed that no images were there. I also thought that the "music" might also had the same problem. And that's what happened. Which Odin version I will need?
Thanks again.
Sent from my GT-P3110 using xda premium
Click to expand...
Click to collapse
Yes stock kernel = stock recovery and you can flash a temporary cwm
there is no problems with a permanent cwm in custom kernels as you need cwm to flash roms
If you goto phone settings about phone it will show you your current baseband - for example mine is xxlf3
You can either download that stock rom firmware from dokys thread if there or any other from your country

Thanks everybody. You are all really helpful. I appreciate your help. But tell me, do I need to mount system before installing Elegance? And while I'm having a custom kernel installed, can I flash roms or I need the stock kernel?
Thanks again.
Sent from my GT-P3110 using xda premium

dimsar2013 said:
Thanks everybody. You re awesome. I appreciate your help. But tell me, do I need to mount system before installing Elegance? And while I'm having a custom kernel installed, can I flash roms or I need the stock kernel?
Thanks again.
Sent from my GT-P3110 using xda premium
Click to expand...
Click to collapse
Follow instructions on the op of the rom you want to flash
you must always mount system before flashing a zip else nothing will happen - you can flash zips all day and no changes would happen as it can't write to system as it's not mount!
As a general rule
wipe system
wipe data
wipe cache
mount system
mount data
mount cache
flash zip
format data (not always required just for some roms)
restart
you do not need to go back to stock to change rom
There are guides in general section - please read them first then you would understand the process

My current ROM. Stock 2.3.6 rooted
Sent from my GT-S5360 using xda app-developers app

A few months ago, I installed Creed 3.5 ROM. It was awesome. I want to install it again but tell me:
Can I install it while I have a custom kernel installed? If yes, do I need to mount system before installing? Thanks for help

dimsar2013 said:
A few months ago, I installed Creed 3.5 ROM. It was awesome. I want to install it again but tell me:
Can I install it while I have a custom kernel installed? If yes, do I need to mount system before installing? Thanks for help
Click to expand...
Click to collapse
Yes you can flash it over any kernel and yeah mount all the partitions after formatting them.

dimsar2013 said:
A few months ago, I installed Creed 3.5 ROM. It was awesome. I want to install it again but tell me:
Can I install it while I have a custom kernel installed? If yes, do I need to mount system before installing? Thanks for help
Click to expand...
Click to collapse
I refer you to my previous post in this thread
wipe data system cache
mount everything
flash rom
you can use any compatible kernel

The problem with the files is caused by the sdcard
Sent from my GT-P3110 using XDA Premium 4 mobile app

.zip cwm for galaxy y

I have googled but cannot find any. Plz give a link(for gts 5360)
Sent from my GT-S5360 using xda app-developers app

mjobanjatt said:
I have googled but cannot find any. Plz give a link(for gts 5360)
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Here is it.... :good:
JUST PRESS THANKS IF I HELPED...

Varun hellboy said:
Here is it.... :good:
JUST PRESS THANKS IF I HELPED...
Click to expand...
Click to collapse
The installation was successful and it boots into CWM but next time I boot into recovery and there was stock recovery. I reinstalled CWM and same thing happens
Sent from my GT-S5660 using xda app-developers app

mjobanjatt said:
The installation was successful and it boots into CWM but next time I boot into recovery and there was stock recovery. I reinstalled CWM and same thing happens
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
because it is a temporary cwm so you should flash it again and again for use

mjobanjatt said:
The installation was successful and it boots into CWM but next time I boot into recovery and there was stock recovery. I reinstalled CWM and same thing happens
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
There are two types of cwm
Temporary - for users of stock kernel or custom kernel that uses stock recovery
Permanent - cwm is built into the custom kernel & replaces stock recovery
if you want a permanent cwm flash a kernel with permanent cwm (see the kernel features in it's thread)

mjobanjatt said:
The installation was successful and it boots into CWM but next time I boot into recovery and there was stock recovery. I reinstalled CWM and same thing happens
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
Flash any kernel that has integrated cwm to have cwm permanently .....

mjobanjatt said:
The installation was successful and it boots into CWM but next time I boot into recovery and there was stock recovery. I reinstalled CWM and same thing happens
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
try hells fusion.... best kernel for SGY....

Hasn't ANYONE come up with a permanent cwm for our cute little y?!

Kobro said:
Hasn't ANYONE come up with a permanent cwm for our cute little y?!
Click to expand...
Click to collapse
there has been a permanent cwm for galaxy y for years!!
there are two types of cwm
1 - tempory cwm zip
flash this in stock recovery to get to cwm - needs to be flashed each time you want to enter cwm
2 - permanent cwm
flash a custom kernel with cwm built in - this replaces stock recovery
If you want a permanent cwm just flash a kernel that has cwm built it!

marcussmith2626 said:
there has been a permanent cwm for galaxy y for years!!
there are two types of cwm
1 - tempory cwm zip
flash this in stock recovery to get to cwm - needs to be flashed each time you want to enter cwm
2 - permanent cwm
flash a custom kernel with cwm built in - this replaces stock recovery
If you want a permanent cwm just flash a kernel that has cwm built it!
Click to expand...
Click to collapse
thats exactly what i meant! the first option is hardly permanent, especially if you accidentally delete the .zip.
and what if someone doesn't want to flash kernels?
other phones have a .zip that you flash once and have cwm permanently. that's what i meant by a permanent cwm!

Kobro said:
other phones have a .zip that you flash once and have cwm permanently. that's what i meant by a permanent cwm!
Click to expand...
Click to collapse
Then get another phone that has that function.
Remember, our phones are not godly, not everything-can-do phones. They are only bottom-range phones. Hardware and software limitations cause this issue. If you want to fix it, do it yourself.
But if you want to contradict yourself and say "I wanna stick to my little Y" then flash a kernel.
Which is essentially in a zip.
And then you get permanent CWM.
Problem solved.

Kobro said:
thats exactly what i meant! the first option is hardly permanent, especially if you accidentally delete the .zip.
and what if someone doesn't want to flash kernels?
other phones have a .zip that you flash once and have cwm permanently. that's what i meant by a permanent cwm!
Click to expand...
Click to collapse
other phones work in a different way - for example HTC phones have fastboot and a recovery totally different from a samsung galaxy y 5360
the only way in this phone to replace the recovery perminantly is to flash a kernel that has it

GT-S5360b Problems with rom /cwm
Hello guys, I was trying to install the rom PureKat 3.0 (also tried the 1.0 and the 1.5 update extreme) in Galaxy Y GT-S5360b with cwm v5.0.2.6, but got the following message
'' E: Can not open / sdcrd/PureKat1.0.zip
(bad)
Installation aborted. ''
Please, Would anyone help me solve this, I have already given wipe data / reset, wipe cache partition, went into mounts and storage and wipe gave to all options and let it all assembled, but received the same message.
attachments below
. www . dropbox . com /s / yjemrraamenyd1x / CAM00302 . jpg
i'm new herre,so , sorry for write the link with space .

Guh18 said:
Hello guys, I was trying to install the rom PureKat 3.0 (also tried the 1.0 and the 1.5 update extreme) in Galaxy Y GT-S5360b with cwm v5.0.2.6, but got the following message
'' E: Can not open / sdcrd/PureKat1.0.zip
(bad)
Installation aborted. ''
Please, Would anyone help me solve this, I have already given wipe data / reset, wipe cache partition, went into mounts and storage and wipe gave to all options and let it all assembled, but received the same message.
attachments below
. www . dropbox . com /s / yjemrraamenyd1x / CAM00302 . jpg
i'm new herre,so , sorry for write the link with space .
Click to expand...
Click to collapse
Your download was incomplete.Re-download the whole ROM again without any data interruption.

samsung galaxy y
hi guys i want to bring back my original samsung galaxy y os. please give me the link to flash it back. thanks

[Q] Galaxy Y custom kernel problem

So yeah, hey XDA, first post here
I have got a problem with my SGY, whenever i flash a custom kernel via CWM, I get stuck at splash screen. And when i flash stock kernel via Odin, phone boots normally.
Do you guys know what is the problem?
Kernels I have tried:
1.Kuro - loop at splash
2.Hells-fusion - loop at splash
3.Savie - stuck at splash
Any help would be really appreciated.

xddxd said:
So yeah, hey XDA, first post here
I have got a problem with my SGY, whenever i flash a custom kernel via CWM, I get stuck at splash screen. And when i flash stock kernel via Odin, phone boots normally.
Do you guys know what is the problem?
Kernels I have tried:
1.Kuro - loop at splash
2.Hells-fusion - loop at splash
3.Savie - stuck at splash
Any help would be really appreciated.
Click to expand...
Click to collapse
Most likely you failed to mount system before flashing the zip or your baseband needs updating
Make sure you goto mounts & storage in cwm and mount system before flashing any zip (will display "unmount system" if it is mounted)
To update baseband flash one of the latest stock roms via odin - see my firmware thread - link it signature

marcussmith2626 said:
Most likely you failed to mount system before flashing the zip or your baseband needs updating
Make sure you goto mounts & storage in cwm and mount system before flashing any zip (will display "unmount system" if it is mounted)
To update baseband flash one of the latest stock roms via odin - see my firmware thread - link it signature
Click to expand...
Click to collapse
Thanks for your reply
Yeah I did mount everything in CWM, it's probably the baseband thing. I have the latest firmware file for my region (Baltic States). Will it work?
Here is the version of it:
PDA:XXMI1
MODEM:XXMG1
CSC:SEBLL1
KERNEL:XXMI1
Anyways, gonna make a nandroid backup and try to flash the whole stock firmware.
EDIT:Flashed stock with wipe, rooted, flashed savie - no luck.

xddxd said:
Thanks for your reply
Yeah I did mount everything in CWM, it's probably the baseband thing. I have the latest firmware file for my region (Baltic States). Will it work?
Here is the version of it:
PDA:XXMI1
MODEM:XXMG1
CSC:SEBLL1
KERNEL:XXMI1
Anyways, gonna make a nandroid backup and try to flash the whole stock firmware.
EDIT:Flashed stock with wipe, rooted, flashed savie - no luck.
Click to expand...
Click to collapse
Yes that's the latest firmware
The only other thing I can think of is that you are using the wrong cwm
Here is my one - Flash it in stock recovery then mount system & flash zip
http://d-h.st/u2m
Also there are different versions of savie - make sure you are using the stock one if on stock rom and not the cm one
I would use hells fusion #50 myself for testing

marcussmith2626 said:
Yes that's the latest firmware
The only other thing I can think of is that you are using the wrong cwm
Here is my one - Flash it in stock recovery then mount system & flash zip
(Your link, can't post it because of limitation)
Also there are different versions of savie - make sure you are using the stock one if on stock rom and not the cm one
I would use hells fusion #50 myself for testing
Click to expand...
Click to collapse
Downloaded the CWM you provided, mounted everything, flashed hells-fusion, and still got bootloop

xddxd said:
Downloaded the CWM you provided, mounted everything, flashed hells-fusion, and still got bootloop
Click to expand...
Click to collapse
I dont know what your problem is - do you have any mount scripts for linking sdext
You can format data and wipe cache & delvik cache & see if it boots
Other than that without seeing your phone I cannot offer anything else

marcussmith2626 said:
I dont know what your problem is - do you have any mount scripts for linking sdext
You can format data and wipe cache & delvik cache & see if it boots
Other than that without seeing your phone I cannot offer anything else
Click to expand...
Click to collapse
Yep, I had link2sd, anyway to delete the script?

xddxd said:
Yep, I had link2sd, anyway to delete the script?
Click to expand...
Click to collapse
Use aroma file manager - Flash it in cwm with system mounted
Goto system/etc/init.d
Delete everything in there so nothing can conflict
http://forum.xda-developers.com/attachment.php?attachmentid=1408182&d=1350455938

marcussmith2626 said:
Use aroma file manager - Flash it in cwm with system mounted
Goto system/etc/init.d
Delete everything in there so nothing can conflict
http://forum.xda-developers.com/attachment.php?attachmentid=1408182&d=1350455938
Click to expand...
Click to collapse
It worked, thank you sooo much!! Can I use Link2sd now on kuro?

xddxd said:
It worked, thank you sooo much!! Can I use Link2sd now on kuro?
Click to expand...
Click to collapse
If done correctly than yes

marcussmith2626 said:
If done correctly than yes
Click to expand...
Click to collapse
Oh, and BTW savie still doesn't work xD

xddxd said:
Oh, and BTW savie still doesn't work xD
Click to expand...
Click to collapse
His kernel is technically banned on XDA due to not being able to provide the sources
All I can say is long as you are the right one - there's one for stock and one for cm7 but I'd just use hells fusion #50

marcussmith2626 said:
His kernel is technically banned on XDA due to not being able to provide the sources
All I can say is long as you are the right one - there's one for stock and one for cm7 but I'd just use hells fusion #50
Click to expand...
Click to collapse
Idk why, but Ramexpander says hells-fusion doesn't support swap so I went for kuro.

xddxd said:
Idk why, but Ramexpander says hells-fusion doesn't support swap so I went for kuro.
Click to expand...
Click to collapse
Hells fusion doesn't support swap - I don't think there's much point in it anyway but whatever works best for you