Hello everyone
when i purchased my tab 3 months ago, it came with a charger [with the permanent cord] but not the travel one [i refer to the other charger which has a usb type slot]. a dont know if all p6800 has this type of charger since i saw some having the usb type wall charger.
now, my stock charger malfunctions and sometimes it charges and sometimes it doesnt [i think there might be a connection problem] now my problem is that, the mains charger [usb type] seems expensive to me [about $62.00 for the head only]. is there any alternative mains charger that is cheaper? and if i buy a non-samsung charger, will it affect the battery of my tab?
thanks
mine: looks like this.
I often use a dual usb port charger that I have and it seems to work fine.
It has an 1 Amp output.
Related
Cannot charge xda executive with car charger ,when connected nothing happens light does not go red and also the connection icon does not show
make sure you dont have a faulty charger... dont know what you are using but i believe most people use the cigarette lighter to usb converter and then just use the usb cable... also have you tried pressing the on and off swith with the charger plugged in ?
BR
car charger
Hi and thanks for the fast reply mate <yes it is a new charger from o2 .
No i have not tried the on off with the switch ,but would i still be able to charge when i am using tomtom
Whell....I use the cigarette lighter to usb adapter and usb cable ...at times i have had to quik press the on/off swith and at times plug and unplug the cable to get it to charge ....I used this as a "jump start" method only and no problems after that with using it whillst on charge (even with tomtom)..... other than that you may have a faulty charger or fag lighter to usb adapter (I never seen what a o2 one looks like).
BR
Is the charger one especially for the exec?
I found normal usb chargers for phones like V3 or a GPS charger cant supply enough current to charge an exec.
hi, yeah i have had this problem, and so have a few of my clients, seems that not enough juice flows through the non branded versions, unlike from o2's or Brodits cables
I found that a regular USB cable into a Cigarette Lighter -> USB Socket didn't work until I joined pin 4 to pin 5 on the USB B Mini plug. All of the adapters I had that worked, but only powered (no data, i.e. Brodit and mains adapter) seemed to have pin 4 joined to pin 5 (pin 4 isn't normally connected at all). Once I did that mod it worked fine.
Cheers,
Steve.
bluesign2k said:
Is the charger one especially for the exec?
I found normal usb chargers for phones like V3 or a GPS charger cant supply enough current to charge an exec.
Click to expand...
Click to collapse
Orange shops carry a charger intended for HTC manufactured devices (i.e. the SPV C500/M500 range) which works fine. Only £9.99.
So I visited my local Walmart and discovered a car charger, designed for Blackberry 6200 through 7500 and Motorola RAZR series phones.
The connector is the same, mini USB B.
$25,000 Question: Can I use this to charge my TMO MDA? Same connection, just worried the voltage or wiring might not be the same.
The AC chargers that came with my Razr and MDA are the same voltage-wise (5V) but not the same Amps.
MDA is 5V 1A, Razr is 5V 0.5A, they are not the same
However, it shouldn't damage the battery, just charge slower.
Just so you know, USB ports output 5V at 0.5A as well.
Edit: Sorry, I realize I completely changed my post, but didn't want incorrect info out there.
Thanks...I figured that, but was just making sure.
I got it in case of emergency...I almost always charge via USB; just leave it plugged in all day.
But you never know.....
Thanks!
fuzzie said:
Thanks...I figured that, but was just making sure.
I got it in case of emergency...I almost always charge via USB; just leave it plugged in all day.
But you never know.....
Thanks!
Click to expand...
Click to collapse
Don't expect it to charge if you battery is below 30-20% charge. I'm not sure why this is an issue but it has bitten me in the rear once already.
Does anybody know why it's a problem for "less-than-1amp" chargers to charge back from the low threshold?
boxwave.com sells a 1 amp car charger. It has a USB port, so you just use it with any cable that normally plugs into a USB port. Since my Globalsat GBH-820 BT adapter came with a cable with large USB at one end, and _two_ mini USB at the other end, I can charge the GBH-820 and my 8125 at the same time.
oconnor.jb said:
boxwave.com sells a 1 amp car charger. It has a USB port, so you just use it with any cable that normally plugs into a USB port. Since my Globalsat GBH-820 BT adapter came with a cable with large USB at one end, and _two_ mini USB at the other end, I can charge the GBH-820 and my 8125 at the same time.
Click to expand...
Click to collapse
That's not true,... if you use the VersaCharger like I do. This is where I learned of the "charging only" cable that Boxwave sells (how conveinent) and then they sell a Sync/charger for USB only. I have a Boxwave VersaCharger that I can't use without buying their "cable" to make it charge the 8125. I found this out because I have a Belkin retractable sync/charge cable that doesn't work with the VersaCharger as I had hoped. The cable that you have may work with 1amp charger but it probably won't work with theVersaCharger.
What is the output on the "min-usb" connector end of the cable? This sounds like the cable that I need for the 2 devices that I use.
...I wonder if they are putting some electronics in the cable connector...?
I bought the bundle that had a car charger (I have the regular; not the high output; not the Versa) and two mini-Sync (retractable) cables. I got caught by the fact that one of them is "charging only" when I was trying to use the "charging only" cable between my laptop and my TI-84plus calculator. I switched to the mini-USB cable that came with my calculator, and it worked fine, as did my phone with AS. That's when I looked closer at the two mini-sync cables and noticed that one was for "charging only". So, that mini-sync cable (the charging only) stays in the car, and works fine for charging my phone or my GBH-820. The really odd thing is that the "charging only" cable looks "thicker" than the one that works for syncing. Maybe lower gauge wire to help the higher current flow easier.
I have also used my other USB-miniUSB cables with my car adapter. E.g. the cable that came with the phone, the cable that came with my TI-84plus calculator.
My Bluetake headphones came with their own USB cable that has, for lack of any better term, an ultraminiUSB (or some kind of proprietary connector, cause it's not marked with a USB symbol like the other cables) plug at the end. I just plug the regular USB end of that cable into the car charger, and it charges the Bluetake's just fine.
Excellent car charger for Wizard
I have purchased and used the "Ecovell 4x USB" adapter on both a Wizard and a Universal. It provides a 2 Amp output which is equivalent to the AC adapter and works with any mini-USB cable. It will charge a Universal from absolutely dead which I have not been able to do with any other adapter. Here is the link to the item on Yes Depot:
http://www.yesdepot.com/product/ud0520.html
I've ordered from them and the service was OK. I haven't seen the item available anywhere else.
Regards,
Dave
Is there any way to see if the unit is being fast or slow charged? It seems that the HTC charger uses an extra pin on the charger to enable fast charging and that MAY be why some aftermarket chargers (wall and car) do not seem to keep up with the battery discharge when running even if their plugged into a charger with sufficiant current capability. The HTC Wall caheger is rated as a 1 Amp charger. I have other chargers that use an external USB cable to connect, both rated as 1.5Amp (1500mA) chargers but seem to charge very slow. Soooooo I'm looking for the difference between the HTC charger and the aftemarket ones to see if I can make the ones I have work properly.
Thanks for any help
joe
<edit> in Looking at the Mini USB spec I find 5 pins labeled 1-2-3-x-4 with 1being VCC (5v), 2 & 3 being Data + & - and 4 being Gnd. Does the Advantage use the X pin to enable fast charging? How? Does it provide a second 5v line to cause/enable the Advantage to fastcharge? I think I need to look at the wall charger mini USB pinouts.
After talking to Pocket PC Techs and looking around online, it looks like the x-pin (next to pin 4(gnd)) is shorted to pin 4 to provide the advantage with a sense line to tell it to fast charge. The also shuts off the data lines in the unit AFAICT. Still don't know what the current capability of "Fast Charge" is or how to ask the unit to query the port for status. USB ports are generaly limited to 500ma and the stock charger is 1000ma (1A) so it seems that to ensure the MAX charge, the cable connected needs to have the x pin and pin 4 shorted. This is usefull if you are NOT wanting to do a data transfer (car GPS, stand alone charging, etc).
Here is a link to the connector http://pinouts.ru/PDA/pda_miniusb_pinout.shtml
Anyone can add to this?
Joe
I just received the Lil Sync DUO Mini-5 Adapter from PPC tech and it works perfectly. I'm now getting a fast charge from my PC (no sync) and I'm able to charge my S705 bluetooth headset.
Interesting news on the pinouts. I've never heard of any utility that shows fast vs. slow charge.
I wonder if anyone has a utility that can sense a gnd on the x pin (next to gnd) of the input connector. Does anyone have a schematic of the advantage side of the input power/data connector. It would me that there might be a pullup on that line sothe unit see's it as a high untill pulled low by a ground applied tothe x pin.
here you have "hot to do it"
http://forum.xda-developers.com/showthread.php?t=396053
ppa25 said:
I just received the Lil Sync DUO Mini-5 Adapter from PPC tech and it works perfectly. I'm now getting a fast charge from my PC (no sync) and I'm able to charge my S705 bluetooth headset.
Click to expand...
Click to collapse
Please tell me i need "PPC Techs HTC Advantage Lil Sync Extended Cable + mini 5 DUO" ( http://www.expansys.com.gr/p.aspx?i=145972) or ONLY "PPC Techs HTC Advantage Lil Sync DUO Mini-5 USB Adapter" (http://www.expansys.com.gr/p.aspx?i=145975) ?
Anyone know how this would be charged in the UK? Are there special USB-C chargers, would a shaver adaptor work with that 2 pin charger the phone comes with?
I already have a USB 3.1 hub with charging ports so using the cable on it's own should be fine just want a plug charger for in the work.
I live in the UK, my two prong adapter is plugged into a shaver/euro adapter and it works fine.
Thanks for that, just wondered if a shaving adaptor would be able to handle the power required but I suppose a shaver's power requirements are probably comparable to a phone
Go to Sainsburys. You can buy a European to UK adapter, rated at 10watts. Lot safer than shaver plugs
BTW I read yours has not come yet. Mine came with a separate box, I wasn't expecting with a proper UK charger in. I looked at the zuk official website and they have the fast charge ones for this - 5.3v +2amps. Or might be 3amps..the one that is in the box is not a fast charge. I got some plugs off Amazon that send power down the data usb wire. They just plug in line and help alot
Hi,
So I just got a new car charger: Xqisit 6Amp Micro USB xqisit.c om/index.p hp?productdetail=20425 (Add the http: and remove spaces as I cant post links yet)
My phone charges fine off the 1 amp port, but when connected to either the short built in cable, or using the same cable as with the 1amp port, my phone does not even detect it is connected to a charger
My phone is a Vodafone Galaxy S5, running the stock 4.4.2 firmware.
This charges fine using any other charger.
We have also tested my dads S5, which is running 5.0 which charges fine using any of the ports.
We've also tested both phones in a different car, and get exactly the same results.
Any ideas why my phone refuses to charge off the 2.4Amp ports on this charger?