Database Users

lockscreen password lost - how to reset?

Hi,
my nephew has forgotten his lockscreen password (text). So there is no chance to get in android. The Nexus 7 is locked and USB debugging is NOT enabled.
What can I do to get in android back?
WLAN is on!
When I get to the bootloader to do Recovery Mode - then I get the Android-Man with the message Kein Befehl (no command).
Thanks and best regards,
schiff

Put in incorrect password
Type in incorrect password about 10 times. Then it will give you an option of using your google account to unlock.

manishyadav05 said:
Type in incorrect password about 10 times. Then it will give you an option of using your google account to unlock.
Click to expand...
Click to collapse
That does not work. After 5 times there us displayed a pop up with the message: you entered the password 5 times wrong. please try again in 30 sec.
But there is no possibilty to enter the google account.

I open the Nexus 7 case. Is there any battery (or somethin like that) to make a hard reset?

schiff81 said:
That does not work. After 5 times there us displayed a pop up with the message: you entered the password 5 times wrong. please try again in 30 sec.
But there is no possibilty to enter the google account.
Click to expand...
Click to collapse
Does it says 'Forgot pin' anywhere after 5 wrong messages? You need to tap that link which will take you to login through Google account.
If that doesn't works, then hard reset your nexus 7 to factory settings. It will wipe all apps and data. See this link for hard reset
http://www.ekoob.com/hard-reset-recovery-mode-nexus-7-11334/

I found the answer:
* http://androidforums.com/nexus-7/610638-warning-nexus-7-has-no-hard-reset.html
Here's the trick.
Reboot to fastboot by pressing POWER and VOLUME DOWN together until you get to the first boot screen. Select "Recovery Mode" by using the volume buttons to scroll and confirming with Power. It will reboot into recovery (the smaller Android with the open chest and Red "!") Now - here's the tricky bit - you have to press POWER and UP together ONCE to enable the recovery menu.
Then, you can select Factory Reset and you're good to go.
You don't need to be plugged in to a computer.
Click to expand...
Click to collapse

[Q] Please help guys

I have installed 4.2.2 on nexus 7. As I had skipped account login at welcome screen, i could not login the account. I altered the apk of login. After factory reset my device has hanged on setup on welcome screen. I tried installing custom rom through stock bootloader but the bootloader says installation failed. How do I solve thia problem guys???

subin.nexus7 said:
don't know the exact steps, but i got it out of the APX mode and into the bootloader.
1. Tablet plugged into computer.
2. Held Volume Down + Volume Up + Power (simultatenously) for three seconds
3. And then released all, and pressed Power again.
4. Tablet booted into bootloader.
I thought that unlocking the bootloader ALWAYS voided the warranty, but in anycase I flashed reflashed ALL stock and locked the bootloader. Will be sending it to ASUS now. Thanks again!
EDIT:
So I wanted to verify that it was a CPU problem, and I downloaded StabilityTest again and ran the CPU load test. It crashed within two minutes, and went into AXP mode again. To get it out of AXP mode, the correct instructions:
1. Plug in the usb into computer
2. Hold Volume Down + Volume Up + Power simultaneously for like 15 seconds
3. The bootloader should show up.
4. If it doesn't, unplug the usb cable, and plug it back in and then repeat the these procedures.
Click to expand...
Click to collapse
Very helpful! I don't have a problem but I've read about others stuck in APX mode. This should be pinned if it works for those stuck in APX. Maybe you should change the thread title to something about APX solution so it draws some attention.

kieso said:
Very helpful! I don't have a problem but I've read about others stuck in APX mode. This should be pinned if it works for those stuck in APX. Maybe you should change the thread title to something about APX solution so it draws some attention.
Click to expand...
Click to collapse
Well... being stuck in APX doesn't necessarily mean your hardbricked. (Corrupt or erased bootloader).
But being hardbricked DOES mean your device will default to APX mode.
To use a mathematical metaphor, one is a SUBSET of the other.
-------
bftb0 has posted an exhaustive list of Nexus 7 button press combos here...
http://forum.xda-developers.com/showthread.php?t=2133986
... which includes how to pro-actively get into APX mode... although until somebody figures how to nvFlash the N7, APX is sort of redundant.
Rgrds,
Ged.

Delete

subin.nexus7 said:
I have installed 4.2.2 on nexus 7. As I had skipped account login at welcome screen, i could not login the account. I altered the apk of login. After factory reset my device has hanged on setup on welcome screen. I tried installing custom rom through stock bootloader but the bootloader says installation failed. How do I solve thia problem guys???
Click to expand...
Click to collapse
I'm sort of confused about the relationship between your edited post and what (apparently ?) kieso quoted, but I'll throw out a few suggestions:
1) AFAIK, there is no way to flash a dev ROM using fastboot (only the boot image of a dev ROM can be flashed this way). You said "bootloader", not "custom recovery" ... so that implies using fastboot. If that is not the case, then your use of terminology is not correct. (It's a computer - reporting details correctly is incredibly important).
2) If you bypass the WiFi login, an account can be added at any time later using the settings menu or simply by launching the Google Play (market) app - there is no need to "alter the apk of login", whatever that means.
3) I would recommend at this point that you start completely over by flashing a factory ROM using fastboot - see the sticky thread about returning to stock using fastboot. If you already have the 4.18 bootloader installed, I recommend you avoid like the plague any operation involving flashing the bootloader.
4) It should be obvious from the trouble that you got yourself into that you should learn what nandroid backups are and that you START USING THEM. The first thing you do after rooting is "make a backup", not "flash a ROM"
good luck

Thanq so much.But still some clarification needed
Now What do I do? My nexus 7 can't pass through at welcome screen saying saying unfortunately setup wizard has stopped. and in recovery{i have no custom recovery, I use bootloader 4.18} i cant flash any rom. I just want to start device any how.. any way.. Is there any way??

subin.nexus7 said:
Now What do I do? My nexus 7 can't pass through at welcome screen saying saying unfortunately setup wizard has stopped. and in recovery{i have no custom recovery, I use bootloader 4.18} i cant flash any rom. I just want to start device any how.. any way.. Is there any way??
Click to expand...
Click to collapse
I guess I am having trouble understanding the sum total of information you have provided - I guess you have omitted some information or mis-stated something. No custom recovery sort of implies a full stock device, but yet you previously mentioned modifying/changing an .apk in /system... normally that would be possible only with a rooted ROM or a custom recovery to do that.
If your tablet is 100% stock, a factory reset of the tablet should allow you to boot once again - at the cost of deleting everything you put on the device, including all files you put on the (pseudo-) SD card.
If that is the case:
- press and hold power+vol-down until the bootloader screen shows up
- use vol-up/vol-down to select "start recovery" and press the power button
- an android lying on it's back should show up; this is the stock recovery splash screen, so
- press power+vol-up simultaneously for about one second - the stock recovery menu should show up
- select factory reset (with vol-up/vol-down) and press the power button.
good luck

bftb0 said:
I guess I am having trouble understanding the sum total of information you have provided - I guess you have omitted some information or mis-stated something. No custom recovery sort of implies a full stock device, but yet you previously mentioned modifying/changing an .apk in /system... normally that would be possible only with a rooted ROM or a custom recovery to do that.
If your tablet is 100% stock, a factory reset of the tablet should allow you to boot once again - at the cost of deleting everything you put on the device, including all files you put on the (pseudo-) SD card.
If that is the case:
- press and hold power+vol-down until the bootloader screen shows up
- use vol-up/vol-down to select "start recovery" and press the power button
- an android lying on it's back should show up; this is the stock recovery splash screen, so
- press power+vol-up simultaneously for about one second - the stock recovery menu should show up
- select factory reset (with vol-up/vol-down) and press the power button.
good luck
Click to expand...
Click to collapse
when you say at the cost of deleting everything, does this include deleting everything in the bootloader because thats what I did when I used the command "fastboot erase bootloader"

Cannot boot even into download mode after changing Fast Dormancy setting

Hi,
I thought I could enter the Hidden Menu and change the Fast Dormancy setting into disabled, so I did it and wanted to reboot my phone. The phone turned off, and was doing its boot up procedure, while it started behaving abnormally. The LG logo popped up for about 5 seconds (so it didn't leave the bootloader), turned off for 10 seconds and then again the whole process repeated. I thought that was a bootloop, so I turned it off, entered Factory Reset menu, chose appropriate options and waited for the reset, but the phone didn't perform the action. Then I tried to get into download mode, but to no avail - the phone kept going with bootloop. I'm still struggling to do this; the only menu I could get into was the Factory Reset one.
Could anyone help me get my phone back into function?
D802, 20G stock
Thanks in advance!

That's weird. I always disable fast dormancy after a reset or a new rom flash and I've never had any issues.
What comes instead of download mode? If nothing, Are you sure you're doing it correctly?
Press and hold the power button for 10-15 seconds.
Plug the phone into the cable, then press and hold volume up and plug the cable into the computer. That should trigger download mode.

Thank you for your help.
I know that's weird, I've entered Download mode numerous times using the combination that you provided and can't do it this time. The strangest thing actually is that the factory reset menu does show up (though it does nothing), while Download mode does not - it seems to be actually unaffected by using the combination and is still stuck in a bootloop. I have no idea what steps should I take in order to recover my phone.
I forgot to mention that the phone wasn't even rooted then, which makes it even more mysterious...

Ouch! Well what comes up when you enter download mode? Fastboot? Black screen?
If you're still covered by warranty take it for a replacement. I doubt fast dormancy alone has messed up your device. If it truly has, then try booting the phone without a sim card.

Normally when I insert the USB cable with vol up button pressed, the LG logo shows up, then the notification of Download mode and finally the Software Update screen. But this time, only the LG logo shows for about 5 seconds, as if I normally booted it using Power button and does not get me into neither Download nor Fastboot mode.
Well, I took a look at other options in this hidden menu, but still, could it brick that hard even then?
I doubt whether I'm still eligible for a replacement, as the device had been rooted already (though it's not at the moment). The whole process also takes quite a lot of time, which is why I wanted to avoid it. Is there any method to bring it back to life?

I wanted to revive my phone using the method linked with flashing the whole partitions onto my phone, but Ubuntu didn't even notice that any drive was connected...
Am I doing something wrong? I mean e.g. is the combo Vol Up + cable still the same in D80220G? Is there any other way of accessing the phone through my computer? Can I somehow stop this bootloop from continuously happening? Doesn't the fact that I can get into Factory Reset menu help in any way?
Thanks for your help in adavnce!

I think I bricked my P10 Lite. Need help please

I was messing with my P10 Lite and I accidentally wiped the Vendor partition (not sure if I wiped anything else) with TWRP. After the phone rebooted it said something about a critical error during boot and went into erecovery. It gave me two options( I don't remember the second one) and I chose factory reset. It started doing it's thing but I guess something went wrong because it wasn't able to boot and it started to bootloop.
I managed to get into fastboot once. The bootloader and FRP should be unlocked but I am not sure as I think I semi accidentally used the command to relock the bootloader in the hopes of it doing the automatic low level factory reset. After that restart, the phone wanted to boot up but after the Huawei logo it went into the EMUI logo which I've shown in the pictures. Now I can't use any button combination and can't enter any menu. I also can't shut down the phone as it bootloops into the EMUI logo after I press the power button. I opened the phone and turned it off by detaching the battery cable but after holding the power down key and plugging the usb cable into the phone it still boots into the EMUI logo right after the Huawei logo.
I guess not being able to enter fastboot is the major issue and after hours of googling I am yet to find a solution.
Edit: I am a newb!
Please help!

Why did you delete the vendor partition, you could try plugging the phone into your computer and checking if you can do anything with fastboot while it's showing emui logo?

Alaunus said:
I was messing with my P10 Lite and I accidentally wiped the Vendor partition (not sure if I wiped anything else) with TWRP. After the phone rebooted it said something about a critical error during boot and went into erecovery. It gave me two options( I don't remember the second one) and I chose factory reset. It started doing it's thing but I guess something went wrong because it wasn't able to boot and it started to bootloop.
I managed to get into fastboot once. The bootloader and FRP should be unlocked but I am not sure as I think I semi accidentally used the command to relock the bootloader in the hopes of it doing the automatic low level factory reset. After that restart, the phone wanted to boot up but after the Huawei logo it went into the EMUI logo which I've shown in the pictures. Now I can't use any button combination and can't enter any menu. I also can't shut down the phone as it bootloops into the EMUI logo after I press the power button. I opened the phone and turned it off by detaching the battery cable but after holding the power down key and plugging the usb cable into the phone it still boots into the EMUI logo right after the Huawei logo.
I guess not being able to enter fastboot is the major issue and after hours of googling I am yet to find a solution.
Edit: I am a newb!
Please help!
Click to expand...
Click to collapse
Dload method. Put sd card in other phone or some card readers and put appropriate files.

nemanjsb said:
Dload method. Put sd card in other phone or some card readers and put appropriate files.
Click to expand...
Click to collapse
I've already tried that. I've placed the appropriate files into my SDcard but I can't use any button commands including volume up+down+power. When I press them my device just boots into the EMUI logo and nothing happens.
Edit: It boots into the EMUI logo even if I only press the power button. Pressing volume down + usb also boots me into the EMUI logo

DaarkZek said:
Why did you delete the vendor partition, you could try plugging the phone into your computer and checking if you can do anything with fastboot while it's showing emui logo?
Click to expand...
Click to collapse
I measured once and not trice before cutting... I was also not paying enough attention/in a hurry...

Power OFF the phone.
Press and Hold VOL Down and connect the phone to PC via USB cable. The phone should boot into Bootloader (fastboot mode). Does this method work?
or try this:
Press and Hold VOL Up and connect the phone to PC via USB cable. The phone should boot into eRecovey mode and then then select "Download latest stock rom and install".

Aalesund said:
Power OFF the phone.
Press and Hold VOL Down and connect the phone to PC via USB cable. The phone should boot into Bootloader (fastboot mode). Does this method work?
or try this:
Press and Hold VOL Up and connect the phone to PC via USB cable. The phone should boot into eRecovey mode and then then select "Download latest stock rom and install".
Click to expand...
Click to collapse
Ok, it seems like not all is lost about my phone. I managed to get into fastboot. In my situation, pressing volume down + usb cable while the battery was plugged into the phone did not work. That was before I opened up my phone's case and disconnected the battery cable.
As I mentioned before, I had opened my phone and disconnected the battery cable because that was the only way to shut it off.
What I did after I disconnected the battery cable was the following:
1 - Hold volume down and don't release it
2 - Plug in USB
3 - Plug in the battery cable into the phone's mobo.
That booted me into fastboot. Right now, the phone says my bootloader in unlocked and my FRP is locked. What would be the best way to flash the new stock OS on my phone?

Aalesund said:
Power OFF the phone.
Press and Hold VOL Down and connect the phone to PC via USB cable. The phone should boot into Bootloader (fastboot mode). Does this method work?
or try this:
Press and Hold VOL Up and connect the phone to PC via USB cable. The phone should boot into eRecovey mode and then then select "Download latest stock rom and install".
Click to expand...
Click to collapse
I have downloaded THIS and THIS for the new OS but by talking with Alexxxx1 in THIS discussion I learnt that Huawei has implemented a security patch in their latest update, which I've most likely installed, that prevents you from rolling back your OS version. That means I need to install the .386 version, which should be the last if I am not wrong, instead of the .378 correct? Though I heavily dislike patches like this I guess I can't do anything about that...

Fix device without recovery mode

Hello dear xda community
I have a px6 device from the company "Wondefoo" installed in my Mazda (without any hard buttons). It worked so far so good, but ZLink (Apple Carplay) didn't work, so I tried to fix this. To do that, I rooted the device, uninstalled the "ZLink" app and reinstalled a newer version. Then I tried to reboot. And then my problems started:
The device doesn't boot anymore. It tries to start up, I can see the Android 10 boot logo ("multi-media on-vehicle Navigation System" screen), but after about one minute, this logo disappears and the screen remains black.
OK, easy fix --> Just go into recovery mode and reset the device. But here's the big problem: I can't get into recovery mode.
Here's what I tried:
1. Ignition off and on --> Screen still black
2. Press "Reset" button (my device only has this one physical button) --> Boot process started again, but same outcome
3. Unmount the device, plug the power out, wait an hour, plug it in again and try again --> Boot process started again, but same outcome
4. Tried to connect with adb over Wi-Fi to the device (used the last known IP address) --> Connection timeout, Wi-Fi probably not started yet
5. Press&Hold "Reset" button until lights beign to flash to get into recovery mode --> Lights never flash because the "Reset" button somehow breaks the power circuit and when I release it, the device gets power again and boot process starts again with same outcome
6. Press&Hold "Reset" button for a minute, then release it, then press it again quickly within 1sec --> Boot process started again, same outcome
7. Tab with 5 fingers on the boot logo --> Nothing happened
8. Attached keyboard and pressed "Alt" + "PrintScreen" + "I" all the time --> Nothing happens. Keyboard is with RGB LEDs, so I saw it was active when the boot logo was displayed... Then, the LEDs on my keyboard turned off which was telling me that there is no keyboard input possible anymore
9. I even tried this: https://forum.xda-developers.com/t/new-method-enter-recovery-no-physical-buttons.4013453/ --> I just have one similar cable, not two as described in this post... So I put everything together again and just tried again --> Boot process started again, same outcome
Well... Is there any option left? I'm thinking about buying a USB male-to-male cable and try again with adb, but everyone tells me that I need to get into recovery mode first which I really can't
* Is there any other way to get into recovery mode? Maybe with my keyboard?
* Does anyone have another idea what I could try? Maybe without recovery mode?
Thanks in advance and cheers
T

As you said:
1. Ignition off and on
2.Have ready the needle for reset and do that instantly as you see the boot logo.
Once device restarted, wait until will see the boot logo again and pull out the ignition key.
3. Put in an USB socket a pen drive with the right firmware
4. Put back the ignition key and let it in ON position, without starting the engine. The update process will start, have a bit of patience until will finish. The device will restart at the end of the update, and straight after the boot logo, shortly press the reset button.
With a bit of luck, will have a fresh firmware on your device.

Thanks for your quick answer.
I tried what you said several times, but unfortunately I always end up on the black screen, no matter what I try.
My usb stick flashes quickly during the boot process, but nothing happens with it.
I also tried with an USB male-to-male cable and connect via adb, but it won‘t connect...

t-to-the-a said:
5. Press&Hold "Reset" button until lights beign to flash to get into recovery mode --> Lights never flash because the "Reset" button somehow breaks the power circuit and when I release it, the device gets power again and boot process starts again with same outcome
Click to expand...
Click to collapse
Are you sure you are holding the reset button for long enough?
On my machine (Dasaita) you hold the reset and the machine turns off... but you have to keep holding it even after it has turned off. Could be upwards of 1.5 minutes. Once the lights flash (and finished flashing), release and press one more time within 3 seconds.

Thank you for this idea. I have tried 30 seconds, but no more until today...
Now I tried with 1min, 2mins, even 3mins, but nothing happens.. I think the power is immediately cut as soon as I press the reset button. So there is probably no way to fix this easily
I also contacted the seller, but they have a talent to not understand my question. I just get answers like "press the reset button 2 sec and then everything is fixed" or "plug in the USB drive with the new ROM and press update" - of course that doesn't help.
Well I guess I'm left with one last thing: Throw this device away and buy a new one. Not from Wondefoo anymore of course, and hopefully with a working reset button.

I have the same issue. What did you end up doing?
Where did you buy your unit from?