Related
Hi XDA developer
I need help as my HTC HD2 MOBILE is not reboot I have tried the hard reboot and nothing happens.
two questions;
1. if i was to install a new verison of the rom Altermis v 26. which i have downloaded there is a another software called SSLD that I also need to download where is this. And how do i do this.
2. what happens if i cannot reboot the phone TOTALLY - in order to get to the operating screen where i can restore factory settings. I have also done a soft reset and still cannot getting into the phone.
THE MOBILE IS STUCK ON THE "HTC" PRE BOOT UP SCREEN AND NOT PROGRESSING FORWARD FROM THIS POINT.
HELP!!!!!!!!!!!!!!!!! PLEASE
keilah said:
THE MOBILE IS STUCK ON THE "HTC" PRE BOOT UP SCREEN AND NOT PROGRESSING FORWARD FROM THIS POINT.
Click to expand...
Click to collapse
did you flash a custom rom before this happened? If so, it is likely that you forgot to update to a compatible radi. Look through the thread for the rom you downloaded for details.
Hi
oK I under stand but if you was intsalling Altermis v26 on your phone.....there is a additional file where youy down load the software before transferring to your phone what is that software??????
please callled and where can i downlaod this
do you mean hspl? see my sig
yes
if that allows you to download "software" to the HTC HD2 device....and can you kindly please post the link here. and any steps i need to be aware off as i am new to this site.
Once again may thanks for all your feedback and assistance.....
the link is in my signature
"One HSPL3 to rule them all - all leo's supported, all spl inc tmous 2.10.0000"
Hi every one. I had a problems with HD2, my original ROM was with a lot of problems, it restarted without no reason and so on. My colleage suugested to flash with another ROM, so I tride to flash a new ROM, did a Hardspl2 and now my HD is bricked, with triangle and no ROM also shiped (donwloaded from HTC web page by serial) is not working. Anybody help me? I tried lot of ROMs and no luck at least .... Triad also flash with original ROM via Micro SD no luck... Please help me!!!! URGENT!
prieditis said:
Hi every one. I had a problems with HD2, my original room was with a lot of problems, it restarted without no reason and so on. My colleage suugested to flash with another room, so I tride to flash a new room, did a Hardspl2 and now my HD is bricked, with triangle and no room also shiped (donwloaded from HTC web page by serial) is not working. Anybody help me? I tried lot of rooms and no luck at least .... Triad also flash with original room via Micro SD no luck... Please help me!!!! URGENT!
Click to expand...
Click to collapse
Firstly its "ROM" not "room".
What do you mean "with triangle" ??
Which HD2 do you have and which ROM did you try flashing?
Can you get into tri-color bootloader mode?
Sorry i post my thread quickly. Yes i tried to flash a ROM, i have HD2 512MB. I tried to flash a 3.14.405 rom. triangle - i can get in tri-color bootloader mode, but when i try also flash original rom there is no result, it crashes on 9 or 17%. Triangle is a sign when i switch on a device, i believe it means ther eis no windows/rom on device
prieditis said:
Sorry i post my thread quickly. Yes i tried to flash a ROM, i have HD2 512MB. I tried to flash a 3.14.405 rom. triangle - i can get in tri-color bootloader mode, but when i try also flash original rom there is no result, it crashes on 9 or 17%. Triangle is a sign when i switch on a device, i believe it means ther eis no windows/rom on device
Click to expand...
Click to collapse
your device is not bricked... get into bootloader and do a task 29 (LOOK IT UP)...
Then start from scratch... Magldr, then whatever ROM you want.
Can you explain me? Please step by step... Thanks in advance
prieditis said:
Can you explain me? Please step by step... Thanks in advance
Click to expand...
Click to collapse
you need to take a leap and search for it... Here is something on youtube i found.
http://www.youtube.com/watch?v=DtTDuc4V4cU
EVERYTHING you need is on XDA if you look for it...
prieditis said:
, my original room was with a lot of problems, it restarted without no reason and so on. ..with triangle and no room aURGENT!
Click to expand...
Click to collapse
... OK, no room = homeless!
If you can't pay rent, I'm afraid I'll have to ask you vacate the area.
Possible fix stuck bricked hd2 radio no rsa information
Please read the whole post first sorry about the mess it is my first post thanks to everyone here on xda who came up with everything i used to do this There is guides for this xda has a lovely list of tmous roms if you are on t mobile in the us http://www.xdafil.es/index.php?path=HD2/TMOUS/
i would start with the RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15.29.50.07U_2.06.50.04_TeleNav-5.5.42.zip
extract the .exe file if it has one than extract the RUU_signed.nbh from the .exe file using win war or 7 zip than rename it to LEOIMG.nbh and place it on a newly formatted microsd not a microsdhc and i had problems with anything over class 4
place it in your phone and hold the volume down button and power button as loading comes up let off volume down power button will start the flash(i was only able to do complete flashes in the freezer if not it would hang or get radio errors)
i also had a tmous which did not want to flash the radio i would get an an error and rsa fail it sounds crazy but i wrapped it in plastic and stuck it in the freezer for a while before and during the flash this was the only way i could install the radio and actually see rgd information on boot screen after this first one you will have an old test rom with an old spl you cannot change to hspl from here i also was not able to go straight to 2.10, i had to step up from RUU_Leo_1_5_TMOUS_2.03.531.6_Radio_Signed_15.30.50.07U_2.06.50.23_3_Test.zip, to RUU_Leo_1_5_TMOUS_2.03.531.6_Radio_Signed_15.30.50.07U_2.06.50.23_3_Test.zip the same way i did the first one,hard resetting after each one and let it open windows completely to know it is working. than i believe there is an hspl3 file somewhere out there with all thanks to DarkForces Team HardSPL3 by bepe and Cotulla i will try to attach it that will work with spl 2.02 wich you should now be on now you can download your radio in the master radio thread http://forum.xda-developers.com/showthread.php?t=611787
i also just renamed the ruu_signed.nbh to LEOIMG.nbh and ran through sd i seem to have problems through usb and i was trying to be careful with the radio
once you got the radio you want you could flash the rom preferably running task 29 before or get yourself magldr to install through nand i also stuck my laptop an the freezer with the phone to get wp7 completely installed i did all this mess with a phone that had a broken screen i think there is like thermal compound over the processor to the case that is not on right and overheats when not in the operating system like a crappy old laptop with its fans full of stuff trying to install xp. and while a stock rom was being installed the usb was pulled during the radio installation i hope this helps i belive i saw one post to stick it in the freezer out of everything that i think helped the most.i also notice i have to put it in the freezer at boot too sometimes or i will get a fatal hit error i think its just over heating..... i also have an hd2 which has never been opened before that i have never had to stick in the freezer it gets flashed quite abit right now running gingerbread on normal hd2 and wp7 dual boot android 2.2 on the one i had to freeze i hope this helps i was here for weeks reading reading i was stumped cus my first hd2 and g1 were so eazy i will update this post once i stop being lazy and open the phone again to replace the goop to see if that is the problem
Thank you for reading my jumble and thanks again to all you phone heads here on xda which without you none of this would be possible and i would not have wp7 and gingerbread on my hd2 : D
I did a task29, flash a ROM succesfully, but now it' s stucked in HTC loading mode (Shows a HTC and nothing happens)
prieditis said:
I did a task29, flash a ROM succesfully, but now it' s stucked in HTC loading mode (Shows a HTC and nothing happens)
Click to expand...
Click to collapse
succesfull only one time, now i tried reflash an original rom once again and no results, still stucked in triangle. It's a first time when something like this happens
P.S. Sorry for my english..
spyderman33 said:
you need to take a leap and search for it... Here is something on youtube i found.
http://www.youtube.com/watch?v=DtTDuc4V4cU
EVERYTHING you need is on XDA if you look for it...
Click to expand...
Click to collapse
no luck at all I tried it once and have succesfull rom update, but it stucks when started with HTC logo, i tried second time and still no luck. Please help me.. all the time now also for original rom it says that this room is not for that device
original rom
you have to find the original rom shipped with your phone like here i am tmobile usa roms you have to find your carrier and country and start with one of the first ones i started with my second one RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15.29.50.07U_2.06.50.04_TeleNav-5.5.42.zip and i kept getting stuck screens when it was hot turn it off maby find some silica gel (lil rocks that come with everything to absorb water) wrap it in plastic and throw it in the freezer does the back of the phone get real hot during flash
i have shipped original rom, still no luck
not the newest one
you need one of the first test roms this was the only way i got mine to work i had to go from 2.02 to 2.03 to 2.05 hard resetting after each install making sure they completely went in what carrier are you and where are you
Still stuck?
Download HSPL 3.zip from page 1,
Run the program;
a) select 2.08.000 (not HSPL) and you can flash stock (HTC) ROM with no damage or aftermarket changes on your phone.
b) select 2.08.HSPL and you can flash whatever you want
Install MAGLDR 1.13
Flash ROM
Make sure you follow the instructions EXACTLY. You can find these all over XDA, look at all of my posts if you need to.
stepthehen said:
Download HSPL 3.zip from page 1,
Run the program;
a) select 2.08.000 (not HSPL) and you can flash stock (HTC) ROM with no damage or aftermarket changes on your phone.
b) select 2.08.HSPL and you can flash whatever you want
Install MAGLDR 1.13
Flash ROM
Make sure you follow the instructions EXACTLY. You can find these all over XDA, look at all of my posts if you need to.
Click to expand...
Click to collapse
Hi, thanks a lot. Only, SPL for original rom was 1.42000 is it ok to flash with 2.08.000 ? And why i should install MAGLDR 1.3 ? Thanks in advance,
Ok, now i dont understand anything. My original SPL was 1.42, i did Hardspl 3, after that tried flash original rom, process stuck on 96%, after that i tried once again stuck on 9% and says rom not compatible with device. And its like a hidden circle, my phone is acting like that all the time. I tried task29, tried all HSPL, also 1.4200, 1.66 and so on. Can anybody help me? my skype nick is martins.prieditis , maybe someone can assist me?
Ok now its fixed. I did a HSPL4, due to which original rom freeze on 0%, but 3.14 didnt start up on loading OS (white screen with HTC logo))or freeze on 99%. Than went back to shipped 1.42, stock room succesfylly flashed and did a SSPL_RUU. Now the only problem is that my LEO restarts when it gets hot. Any ideas how to fix it?
Thanks all for youre help (regarding my previous issue) !
Overheating??
As mrpoe stated in post 9, One of his phone had to be put in the freezer to be able to flash anything otherwise it will get hot and freeze.
Also the motherboard is most likely broken and you cannot get it to work without freezing or it will keep rebooting...
The best thing to do if you still have warranty is to Keep stock SPL and stock WM6.5 and return for warranty.
It will not function the same again.
hi all
i have a HTC hd2 leo i have followed a tutorial to put android on the nand and to be honest i think ive cocked it right up.
i upgraded the sp and the radio as it said then installed magldr and put the rom of choice on the sd to boot to the nand.
i whent to boot and nothing happened i keep getting error i then somehow managed to wipe all the info so now im left with the magldr and i dont know what to do next to recover it back to windows so i can start again.
can anyone help?
is there somewhere i can send the phone to to have it done?
i dont want to mess it up anymore.
all help for a really new noob is greatly appreciated.
fastcar0605s said:
hi all
installed magldr and put the rom of choice on the sd to boot to the nand.
Click to expand...
Click to collapse
after that u should flash recovery(CWR) and throught that install ur rom
yep ive flashed clock work recovery and all im getting is a sd kernel open failed message what now?
the ROM the ROm is the problem try use other Rom maybe is not for your Phone go to Google and put HD2 Android and the first is all HD2 Leo Roms Good luck
if u still need help text me back i can help u from here on anything
fastcar0605s said:
yep ive flashed clock work recovery and all im getting is a sd kernel open failed message what now?
Click to expand...
Click to collapse
SD kernel open failed,,,,,, that's looking for boot source on the SD card, I believe you chose the wrong option.
fastcar0605s said:
hi all
i have a HTC hd2 leo i have followed a tutorial to put android on the nand and to be honest i think ive cocked it right up.
i upgraded the sp and the radio as it said then installed magldr and put the rom of choice on the sd to boot to the nand.
i whent to boot and nothing happened i keep getting error i then somehow managed to wipe all the info so now im left with the magldr and i dont know what to do next to recover it back to windows so i can start again.
can anyone help?
is there somewhere i can send the phone to to have it done?
i dont want to mess it up anymore.
all help for a really new noob is greatly appreciated.
Click to expand...
Click to collapse
Your device is fine.
First decide what rom you want on your device, then use HD2 Toolkit to "Repartition" your device for that rom.
Once you ahve done that simply put that rom on your SD card and flash after booting into recovery via magldr menu.
Hi to all first, a have a little problem.
I recived a Htc HD2 but it has a blank screen when it starts up, nothing happens,won't boot nothing.
When i get iunto bootloader it give's me this info
PB8110 HX-BC
SPL-2.08.HSPL 8G XE
0x05
COTULLAhspl 0x30
I don't know the operator or the region which the phone came, i tried to flash MAGDLR 1.12 to try to flash wp7 but it say that the image is corrupt and give's me an 270 ERROR. tried a stock rom but it give's the same error.
I'm good with android phones but for this I'm a noob.
If anyone can help please.
Thanks in advance.
Regards Goran
Dont know if it helps but do task29, revert the hard hspl, wipe sd. And try flashing stock windows. And i thought there was some key combination to do factory reset, look it up. Those things might help, let me know
Sent from my HTC HD2 using XDA App
vensterbank said:
Dont know if it helps but do task29, revert the hard hspl, wipe sd. And try flashing stock windows. And i thought there was some key combination to do factory reset, look it up. Those things might help, let me know
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Ihave tried task29 and it say that the image is corrupt, i managed to install a custom rom but it won't boot up,can it be the radio??
It could, there was an other method with a key combination to hard reset it, try that, and reflash radio
Sent from my HTC HD2 using XDA App
vensterbank said:
It could, there was an other method with a key combination to hard reset it, try that, and reflash radio
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Is the combination of Vol+/Vol- and Power and I did that, still nothing, i can flash a custom rom trough sd but it wont boot, and when I try to flash a radio trough custom ruu it gives me the same error, when i try the radio trough sd it displays "radio fail".
As you can see the Leo has HSPL so what's wrong with him???
Thanks for your response vensterbank,thanks a lot!
gvpula said:
when i try the radio trough sd it displays "radio fail".
Click to expand...
Click to collapse
The answer is the "radio fail" message. The HD2 you received was bricked with a RADIO update. Somebody bricked it while flashing the radio.It is officially bricked. There's nothing you can do other than JTAG it in order to recover it.
Yep, sorry bro
Sent from my HTC HD2 using XDA App
I so the guy who's phone is, and he said that the phone was running some kind of android, but than it stoped work, so he went in a repair shop and they flash a wm 6.5 rom, every thing was ok than the phone freez, the guy did a hard reset,than the phone was ok for few day then it came to this.
It gets into bootloader but from there nothing...
Too bad!
Yep, really bad luck bro
Thanks for your answers guys.
Best Regards
Goran
gvpula said:
I so the guy who's phone is, and he said that the phone was running some kind of android, but than it stoped work, so he went in a repair shop and they flash a wm 6.5 rom, every thing was ok than the phone freez, the guy did a hard reset,than the phone was ok for few day then it came to this.
It gets into bootloader but from there nothing...
Too bad!
Click to expand...
Click to collapse
As you describe this, I suspect a thermal problem of CPU(BGA related) more than bad radio flash!
Try to put in fridge for 1-2 hours and than reflash it with a stock ROM: if booting and freezing after a while, it's thermal problem!
ok,I will try this.
Thanks!
I'm trying to fix a co-workers' HTC HD2. It *had* WM 6.5 but she somehow installed SPL 3.03 (?) and I have been unable to make ANY progress with flashing a ROM onto her phone. Any help would be greatly appreciated...
Note: I'm only familiar with working on my Captivate, the XDA community has been good to me in the past, hoping some of you can spare a few minutes to help me help out my co-worker.
Download HSPL4, boot into bootloader (tricolor) and flash HSPL 2.08.
BTW: Wrong forum!
SynGamer said:
I'm trying to fix a co-workers' HTC HD2. It *had* WM 6.5 but she somehow installed SPL 3.03 (?) and I have been unable to make ANY progress with flashing a ROM onto her phone. Any help would be greatly appreciated...
Note: I'm only familiar with working on my Captivate, the XDA community has been good to me in the past, hoping some of you can spare a few minutes to help me help out my co-worker.
Click to expand...
Click to collapse
Have you read my flashing tutorials for the HD2?
Mark.
mskip said:
Have you read my flashing tutorials for the HD2?
Mark.
Click to expand...
Click to collapse
Lol, I was genuinely about to post this guide by you to tell him what to do
Nigeldg said:
Lol, I was genuinely about to post this guide by you to tell him what to do
Click to expand...
Click to collapse
@syngamer if its Android that you want to put on the phone then read the requirements in the above thread before you start. As you have SPL 3.0.3 on the phone you will want to follow *THIS* guide to install HardSPL and select HSPL 2.0.8 from the list or Magldr wont run properly. Also boot into the bootloader and make sure you have a new radio as that can cause problems too.
MArk.
Thanks guys, but no matter which guide/tutorial I try I keep running into the ERROR [262] : UPDATE ERROR
you should give more detail, especially things like the full filename of the file you are using that gives the error, and details of what you are doing to perform the flash, and details of what you think you mean by ''It *had* WM 6.5 but she somehow installed SPL 3.03 '' since thats a normal spl?
ALso, is it a normal hd2, or is it a tmous hd2? (tmous is t mobile US and has green send key red end key, and its very important to know which it is)
samsamuel said:
you should give more detail, especially things like the full filename of the file you are using that gives the error, and details of what you are doing to perform the flash, and details of what you think you mean by ''It *had* WM 6.5 but she somehow installed SPL 3.03 '' since thats a normal spl?
ALso, is it a normal hd2, or is it a tmous hd2? (tmous is t mobile US and has green send key red end key, and its very important to know which it is)
Click to expand...
Click to collapse
It's a T-mobile HD2. She started trying to flash Android on it and got cLK 1.14 but couldn't progress from there.
well i cant really help with the next steps, cos ive never used cLK, its a bit too advanced for me, give me teh simplicity of magldr any day.
You didnt explain the errors tho, , i mean, if you have cLK installed, you should be using fastboot to flash cwm next i think, whereas teh error you describe sounds like you are trying to flash with teh phone in bootloader(stripey screen)?
samsamuel said:
well i cant really help with the next steps, cos ive never used cLK, its a bit too advanced for me, give me teh simplicity of magldr any day.
You didnt explain the errors tho, , i mean, if you have cLK installed, you should be using fastboot to flash cwm next i think, whereas teh error you describe sounds like you are trying to flash with teh phone in bootloader(stripey screen)?
Click to expand...
Click to collapse
Well, I've got Magldr installed, CWM is now on there and from there I'm set. Currently flashing (trying to at least) NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7).
EDIT: holy ****, that was fast. I currently see an HTC logo...wondering if first boot takes awhile like most...and disregard. It's now loading. Success! Thanks for the links/guides everyone! This is why XDA is the best.
Congrats on your restoration f the HD2!
BTW she can dual Boot the HD2 if she likes
SynGamer said:
Well, I've got Magldr installed, CWM is now on there and from there I'm set. Currently flashing (trying to at least) NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7).
EDIT: holy ****, that was fast. I currently see an HTC logo...wondering if first boot takes awhile like most...and disregard. It's now loading. Success! Thanks for the links/guides everyone! This is why XDA is the best.
Click to expand...
Click to collapse
Haha, that was exactly my reaction on first boot Glad to see you got it sorted out